Out of the box, joins on attributes are supported, joining on spatial
predicates however is not. It is something I have in my todo list though. I
don't believe MapGuide supports joins on spatial predicates either.
- Jackie
I finally got round to giving FDO toolbox a go.
Looks very
I don't think frames are accessible if you didn't supply the name attribute
for them as well.
- Jackie
Hello,
I embedd MapGuide in my own application, like this:
frameset rows=30,* frameborder=no framespacing=0
frame id=titleFrame frameborder=no marginwidth=0 marginheight=0
scrolling=no
Is this actually a feasible solution that is usable in a production
environment? If so, I am willing to make a pure, tomcat-only configuration for
the installer (but if so, this configuration won't make it for 2.1)
- Jackie
Hello,
Yes, you can but you need to do some steps.
1. Modify
This is a defect with the Generic control that makes it unusable with
RDBMS-based providers or any providers that have connection properties which
are only available when connected.
This will be fixed for the next release. The workaround in the meantime, would
be to use the express connection
I don't think so.
1. FDO 3.3.1 was built with Visual C++ 2005
2. FDO 3.4.0 is built with Visual C++ 2008
3. FDO 3.4.0 has newer APIs
Even if you have the required runtime libraries installed, I doubt a 2005-built
MapGuide can use 2008-built FDO binaries.
- Jackie
Howdy,
I'm re-installing
What is your environment? (Operating System / 32 or 64-bit). Can we get more
detailed (error) information?
The installer has a Visual C++ 2008 Runtime installer built-in, and it will
install that if it could not find said library on your machine.
- Jackie
Howdy,
Just downloaded and
It's not going to be released on that date.
There is usually beta and RC releases before the final release, and we even
haven't hit beta yet.
From my point of view, it is because the new installer that Jason, Kenneth and
myself wrote is not ready for prime time. Proper IIS7 support is still
How do your tabs look like in HTML terms? It could be screwing up the
javascript of the second viewer.
- Jackie
It could be that the AJAX viewer
I have two tabs in one of my application pages. I am trying to open 2 different
layouts in each tab so the user can switch between tabs for the
Have you defined a primary key for that point table?
- Jackie
Check that the datasource has a X, Y and Z value even if it only requires an X,
Y just assign one of the X, Y columns to the Z and retry, had this problem a
while ago and this seemed to fix it.
Good luck
I try this:
In Maestro, does this PK show up as the key column? If not have you set it?
- Jackie
Have you defined a primary key for that point table?
- Jackie
Check that the datasource has a X, Y and Z value even if it only requires an X,
Y just assign one of the X, Y columns to the Z and retry,
I've made a new release of FDO Toolbox that not only fixes the Generic control
for RDBMS providers, but also provides an express SQL Server 2008 spatial
connection option.
Cheers,
- Jackie
This is a defect with the Generic control that makes it unusable with
RDBMS-based providers or any
Go to the mapagent interface:
http://yourmapguideserver:port/mapguide/mapagent/index.html
Click Feature under Services API
Click GetSchemas
Enter the resource id of the feature source and click Submit
If you get xml content, then click DescribeSchema and enter the same
resource id and enter
\ServerDescribeSchema.cpp
Cannot establish connection.
Jackie Ng wrote:
Go to the mapagent interface:
http://yourmapguideserver:port/mapguide/mapagent/index.html
Click Feature under Services API
Click GetSchemas
Enter the resource id of the feature source and click Submit
You don't have to go that far anymore, if you're using the current version
(2.0.2) changing one of the templates is enough.
http://www.jasonbirch.com/nodes/2008/12/02/213/changing-selection-colour-in-mapguide-ajax-viewer/
- Jackie
Ivan Milicevic wrote:
Selection color is hard coded, so you
There's probably some conversion overhead involved with ODBC points, that you
won't have with native storage.
Unless you need to have your SQL Server 2008 database interop with other
systems (that can't understand SQL Server 2008 spatial data types), you
should go native where possible.
Also
I see an extra brace (the very first one) in the javascript block that could
be messing everything up.
- Jackie
SusanDaniel wrote:
hi all
In order to display a form in the task pane i've the following
code
in ../mapviewerphp/window.php
body
script language=javascript
{
What if you single-quoted the values in the IN filter list?
- Jackie
KOBAH wrote:
Hello,
I hope users might have undergone this basic query filter in past.
districtQuery.SetFilter(Autogenerated_SDF_ID = +
district);
I just want to alter this filter to include multiple
Another question I should've asked:
Are district1, distrct2 the actual values you are after or are they variable
names?
- Jackie
KOBAH wrote:
Hello,
I hope users might have undergone this basic query filter in past.
districtQuery.SetFilter(Autogenerated_SDF_ID = +
IANAL, but is this legal under Google's terms of usage? I remember this legal
minefield with regards to the usage of Google Maps data.
- Jackie
Jonathan W wrote:
i recently saw that the Enterprise Mapguide site has been updated with
brand new samples!!
Perhaps you may have used the wrong MgSelection constructor? The API docs
says that MgSelection() is a dummy constructor.
- Jackie
Jamo wrote:
I'm trying to populate an Ajax TabContainer with a tab for each search.
I'm getting an error for line 94: The map definition is invalid.
, layerClassName,
queryOptions);
Response.Write(featureReader.GetClassDefinition().GetProperties().Count);
I'm not too sure on why or how but I'm not too fussed unless this extra
creation of a MgSelection Set will cause twice as much waiting
Jackie Ng wrote:
Perhaps you may have used
.
KOBAH
Jackie Ng wrote:
Another question I should've asked:
Are district1, distrct2 the actual values you are after or are they
variable names?
- Jackie
KOBAH wrote:
Hello,
I hope users might have undergone this basic query filter in past
That would be the Layer Definition. You would have to get the resource id of
the layer definition from the MgLayer and get the resource content, looking
for the PropertyMapping elements (I believe).
- Jackie
Jamo wrote:
I can remember seeing somewhere something taht returns all the mapped
How big are these nvarchar fields? There were known problems with large
nvarchar fields?
http://trac.osgeo.org/fdo/ticket/471
- Jackie
Daniel, Scott wrote:
I have created a layer from an SDE data source. However, Studio is not
displaying any fields that are nvarchar field type. Is there a
You have to use a MultiXXX geometry type. (MultiPoint, MultiLineString, etc)
To make these types in AutoCAD Map (2009 onwards AFAIK), right click your
FDO layer in your Display Manager, and choose New Feature from Geometry,
then you can select all your disconnected (AutoCAD) lines, and they
Fusion runs on top of MapGuide, which uses FDO. So yes you need to compile
both.
You're probably the first one to try compiling on BSD. So you're probably on
your own here. Do let us know if you have success :-)
- Jackie
Marco Battistella wrote:
Hi,
I am attempting to create a install of
If you understand that feature sources are just xml documents that describe a
FDO connection to a particular data store, then
CreateFeatureSource()/MgCreateSdfParams is just a convenience method that
does the following:
1) Create the SDF file, with the specified schema
2) Create an XML feature
The simplest way to migrate data is to use the mapguide site administrator to
create a data package (mgp), this can also serve as your 2009 backup that
you can roll back if things go wrong.
Copy this package to your 2010 installation
(MapGuideEnterprise2010\Server\Packages). Run its site
Hi Haris,
Will we see a 3.4 port of the KML provider anytime soon?
- Jackie
Haris Kurtagic wrote:
Hi,
I have build latest King.Oracle and King.Informix FDO providers for FDO
3.4.
You can download them from
http://www.sl-king.com/fdooracle/download/download.html and
Are you using the latest release of MapGuide?
Also, do your maps/layers/feature sources have defined coordinate systems?
- Jackie
nasp wrote:
Hi,
I downloaded .NET sample application.
Everything works fine but not the query tool.
In query\classes\query.aspx, Execute() procedure, I got
If you look at the server error logs, do they reveal any more information at
the time of failure?
- Jackie
nasp wrote:
Thank you for your answer.
Mapguide version is 2.0.2 with FDO 3.4
The map has EPSG=3003
Any ideas?
Jackie Ng wrote:
Are you using the latest release
Are you talking about the GDAL provider or using the GDAL library directly in
PHP?
If you are talking about the provider, GDAL is encapsulated in the form of a
FDO provider and that is further encapsulated as MapGuide's Feature Service
API. MapGuide has no direct knowledge about GDAL.
If you
Fusion has a MapGuide 2.1 specific branch, the beta may have stuff that has
not made it into this branch?
Speaking of the Measure Tool, have they addressed this problem yet?
http://trac.osgeo.org/mapguide/ticket/325 (and closely related:
http://trac.osgeo.org/mapguide/ticket/333)
These tickets
I don't know much about Symbol Definitions, but all resources in mapguide
(including Symbol Definitions) are XML data.
So you could use the Resource Service APIs to get the resource content, edit
the xml content (with your XML access library/api of choice) and save back
the changes. This can be
The installer is doing the following:
1) Installing to C:\Program Files\MapGuideOpenSource2.0\WebServerExtensions
- If Apache, configures httpd.conf based on your installer preferences.
- If IIS, creates the virtual directories and sets up the script mappings
(php, aspx, jsp, fcgi) based on your
layers.
OSGeo.ODBC data connection has no spatial context information (SDF layer
connection has it!).
Do you know how can I provide spatial context information for ODBC
geometry?
Regards,
Naspi
Jackie Ng wrote:
If you look at the server error logs, do they reveal any more
No :-)
It just needs to have a coordinate system defined or mapguide won't know how
to interpret the points.
- Jackie
nasp wrote:
Please,
I hope someone can answer my question and I hope the answer is NO.
Is it true:
ODBC data source should be in Lat/Lon coordinates?
Thank you
You have to specify in the layer definition what properties of the feature
source it's using will be displayed when selected.
- Jackie
shepwaydistrictcouncil wrote:
Hi
Over the last week we've managed to go from MGOS newbies to having a
fairly good demonstration server and php/fusion
MapGuide does not expose FDO's IApplySchema command. You will have to use the
FDO API directly if you want to modify existing schemas.
- Jackie
Jamo wrote:
I've been trying this code to add another class definition to a SDF, it
only adds a new classDefinition when the users SDF already
The duplicate object is most likely caused by the line:
map.GetLayers().Add(listLayer)
If there is a possibility of this code path being executed more than once,
you should check for the existence of the layer (by name) before adding it
to the map.
- Jackie
Jamo wrote:
Anyone able to tell
1) I get this problem too. I have folders that contain dots and Maestro will
just choke when it encounters one.
2) I do believe that this has been addressed:
http://trac.osgeo.org/mapguide/ticket/811
- Jackie
Dave Wilson wrote:
When trying to use the 1.0.9 build of Maestro I have
Which constructor for MgMap did you use and which overload of
Create()/Open()/Save() did you use?
- Jackie
gatopardo wrote:
I've tried to open the map with MgMap.Create() and with MgMap.Open()
I've tried to call Save(), but doesnt' work.
It could be a bug? Or I am doing something wrong?
(mapGuideResourceService);
//this throws Null reference exception
//If i use this other overload
mapGuideMap.Save(mapGuideResourceService,new
MgResourceIdentifier(resourceId));
//this throws An exception occurred in the XML parser exception
Jackie Ng wrote:
Which constructor for MgMap did you use
If you search msdn for this GetModuleHandleEx function, it will indicate that
the minimum supported client is *Windows XP*, so this API was first
introduced in Windows XP.
In short, Windows 2000 is not supported.
- Jackie
Andrew DeMerchant wrote:
I did a search in httpd.conf, but didn't
Do you have the PostGIS provider with logging enabled? It may be able to shed
more information in its logs
- Jackie
ary_s wrote:
ary_s wrote:
Hii all,
I was wondering if i'm the only one who face the error about
executeMapAction(10)? My IE 7 gave me debug window after invoke that
Not quite, from your observations it seems the main offender is the
php_MapGuideApiEnvConfig.dll
Looking at the source-code, you'll see the GetModuleHandleEx() API I
mentioned being used.
other factor at play here.
Have you tried running both the MapGuide Server and/or Apache interactively?
Please note that I also installed the Windows 2000 Update Rollup package as
well. I don't know if this makes a difference.
- Jackie
Jackie Ng wrote:
Not quite, from your observations it seems
Hi All,
Is it possible to have a feature source with an extended feature class
containing calculated properties (with these expressions):
- X ( [The geometry property] )
- Y ( [The geometry property] )
Be used as a feature source for a point layer?
- Jackie
--
View this message in context:
Download link for those who don't know: http://fdotoolbox.googlecode.com
- Jackie
2009/6/10 Jackie Ng jumpinjac...@gmail.com
Hi All,
I have posted a new release of FDO Toolbox (0.7.8) which should now finally
work on x64 platforms. I have tested this in Windows XP x64 and it works. If
you
Hi All,
I have posted a new release of FDO Toolbox (0.7.8) which should now finally
work on x64 platforms. I have tested this in Windows XP x64 and it works. If
you have a 64-bit windows box, give this release a spin and let me know how
it goes.
Nothing has changed functionality-wise. This is
I'll gladly try it with instructions). Also, this w2k
installation is totally up to date with WindowsUpdate.
Andrew
On 6/2/2009 10:07 AM, Jackie Ng wrote:
Ok I've just done a clean install on a Windows 2000 VM with a trunk
build
installer (roughly the same as the 2.1 beta) using Apache/PHP
1. Was your SDF produced by AutoCAD Map 2010? Map 2010 makes SDFs containing
3-dimensional geometries, that the map preview can't handle.
2. There should be an Add button below the computed properties. This will
bring up the expression editor where you can enter the required expression.
-
FYI, I do not believe this (important) document is currently in the beta
installer.
- Jackie
Martin Morrison wrote:
The devguide.pdf is usually located in your webserverextensions\help
directory. This will get you started...
Martin
From: mapguide-users-boun...@lists.osgeo.org
Are you sure you weren't using the mapguide enterprise mapagent?
- Jackie
Gyufi wrote:
Hi.
I installed MapGuide Open Source 2.0.2 to a server, where already
installed Autocad Map 3D 2009, Topobase Web 2009 (MapGuide Enterprise and
Studio in it), MapGuide 6.5 and Raster Design 2009.
Maestro isn't directly using FDO. All it is doing behind the scenes, is
relaying these requests to the MapGuide Server, which does all the heavy
lifting.
Just for a test, use the raw mapagent interface, and test the GetSchemas and
GetSpatialContext methods. Do they report the same problems?
-
Providers are named Company.Provider.X.Y
And are versioned x.y.z.0
Basically, change name to: OSGeo.KingOracle.3.2
And change all other versions to: 3.2.2.0
- Jackie
sathishpsk9 wrote:
Hi jackie Nag
I formatte my pc and installed
1.Mapguide 2.01
2.maestro r3911
Use a FDO 3.3 version of that provider.
- Jackie
sathishpsk9 wrote:
Hi Jackie Nag
thank you.I changed provider.xml as per your instructions . but of no
use .. can you please tell should change some other files also
thanks
satish
--
View this message in context:
and then you can start to think about retiring Ajax.
Martin
From: mapguide-users-boun...@lists.osgeo.org
[mapguide-users-boun...@lists.osgeo.org] On Behalf Of Jackie Ng
[jumpinjac...@gmail.com]
Sent: Monday, June 29, 2009 8:50 PM
To: mapguide-users
MapGuide does not support feature joins on geometric components.
- Jackie
dorshemer wrote:
Hello,
I'm trying to perform a geometric join between two tables without using
any spatial DB support.
I have an oracle table representing points on a map with X and Y fields,
and a polygon SHP
Given a MgFeatureReader that contains your feature(s):
- Call its GetGeometry() method to get a byte reader
- Convert this byte reader to a MgGeometry object by using a
MgAgfReaderWriter object.
- Call GetGeometryType() on the MgGeometry to determine what type of
geometry it actually is.
-
You are pretty much correct, the load procedure will reduce the vertex count
by the specified percentage. How it does the generalization I have no idea.
Though I believe that number is the percentage you want to reduce, not the
total percentage you are after. So if you had 5 points along the
function. But i dunno how, i've looked everywhere without luck.
Plz help.
Thanks
Tom / Stygy
Jackie Ng wrote:
Given a MgFeatureReader that contains your feature(s):
- Call its GetGeometry() method to get a byte reader
- Convert this byte reader to a MgGeometry object by using
In terms of creating a layer definition based on an extended feature class
that is a feature join on geometric properties, that is not possible.
But doing it at runtime join using spatial query operators, it is
possible.
- Jackie
Jamo wrote:
Can't a spatial operator on the MgFilter be
This looks really useful. Would you be willing to contribute the source code
for this tool to the mapguide-contrib project?
http://code.google.com/p/mapguide-contrib
- Jackie
Jsm wrote:
I know this isn't a real solution, but it helps alot on my client's site.
Just to share :
Hi Dave,
I think it's this one:
http://trac.osgeo.org/fusion/changeset/1810
- Jackie
Dave Wilson wrote:
It appears with the introduction of the RENDERDYNAMICOVERLAY for selection
we aren't calling the alpha transparency check on the image being
generated.
I can't find in the code how
MgServerAdmin is a public, but not supported API.
Here's the header for MgServerAdmin, with all the methods. Anything under
EXTERNAL_API is callable:
http://trac.osgeo.org/mapguide/browser/trunk/MgDev/Common/MapGuideCommon/Services/ServerAdmin.h
- Jackie
manafi wrote:
I have recently
Maestro API is definitely more flexible. It can wrapper both the official API
and the mapagent. Also it has a bunch of classes generated from the XML
schemas so that you don't have to work with raw XML.
- Jackie
euskalmap wrote:
Hi ,
1 - what method to use to modify dynamiclly
Hi All,
I was wondering what editors / tools you use (pref. free or open source) for
MapGuide Application Development? In particular, what tools do you use for
PHP / Java APIs?
For me .net is easy (Visual Studio / Web Developer Express), but for the
other languages I have to resort to (notepad
That should be a part of the headers installed with the FDO sdk.
Given the FDO sdk is installed at %FDO%
Then it's trying to look for %FDO%\Inc\SDF\IScrollableFeatureReader.h
- Jackie
Takashige wrote:
Hi Zac and everyone,
Thanks to the mailing list archives, OEM was built successfully.
Hi All,
This is a poll for all the users using the current MGOS 2.1 beta.
You may have noticed in your maps that there is now a new arrow pointer icon
beside each layer in the legend, that indicates whether that layer is
selectable or not.
What we would like to know is whether this pointer
The PostGIS provider on Windows requires libpq.dll (The PostgreSQL library)
either in the same directory as the provider dlls or in a directory
specified in the PATH environment variable.
I would imagine the same scenario in Linux. Do you have the directory
containing libpq.so in PATH or
MapGuide can only recognise points in .mdb files. This is intentional.
- Jackie
adrian_kent wrote:
hi list,
i'm begginer in using mapguide opensource. i have problem when upload
*.mdb file. polygon layer changes become point in the mapguide studio. how
to solve it?
i'm very thankfull
If you can't use numbers with Concat() then use ToString() to convert it to a
string
eg. Concat('Value: ', ToString(MYNUMBERPROPERTY))
The expression editor in MapGuide Studio is probably interrogating the
capabilities of the current provider to determine what expression functions
are available
You need to either copy libmysql.dll into MapGuide's FDO directory or make
sure that dll exists in a directory that is part of your PATH environment
variable.
- Jackie
chrismvn wrote:
i want to display data from a mysql databse in my browser using mapguide
and maestro. i am trying to
Based on past discussions, it seems the main roadblock to a 2.1 release now
is a stable release of Fusion that just works. I haven't been quite up to
date on Fusion development.
- Jackie
Andrew DeMerchant wrote:
Any idea when the next beta for v2.1 will be released? The current one
has
You shouldn't have to go that far. Changing templates requires at the most: a
web server restart, and at the least: a refresh of the web browser.
- Jackie
northtron wrote:
You always need to stop/restart the MapGuide Service when you change a
template file to see the results.
saloua
The properties are sorted before being displayed in the properties pane. You
could try commenting out or removing the following line of code to see how
things go.
http://trac.osgeo.org/mapguide/browser/trunk/MgDev/Web/src/viewerfiles/ajaxmappane.templ#L2837
- Jackie
Jo Cook wrote:
Dear
At the function RequestSelectionImage() in ajaxmappane.templ it makes a call
to GETDYNAMICMAPOVERLAYIMAGE passing in the selection color.
That selection color is an ARGB (RGBA?) hex value. You should be able to
control the selection opacity by tweaking the alpha component of that hex
value.
-
You could try replacing the function in that handles mouse scrolling with a
do nothing function.
eg. kartenframe.OnMouseWheel = function() {};
- Jackie
Bernd Kamjunke wrote:
Hello Everybody!
Does anybody know how to deactivate the mousewheel?
I had no luck trying the unbind method of
The problem here could be the MySQL version.
MapGuide 2.0.x uses FDO 3.3.x and the MySQL FDO provider there is only known
to work for MySQL 5.0.x series. If possible, try using the latest 5.0
release instead.
- Jackie
Raghu.indigo wrote:
I created a data connection through the provider
FDO is the way to go. As Kenneth already mentioned, this approach won't be
portable unless you want to dive into the native C++ API. The Managed FDO
API is only available for Windows.
To do this, you will have to do the following:
FDO side:
1. Create a FDO connection to the desired provider
2.
if I miss something?
Gunter
Jackie Ng wrote:
FDO is the way to go. As Kenneth already mentioned, this approach won't
be portable unless you want to dive into the native C++ API. The Managed
FDO API is only available for Windows.
To do this, you will have to do the following:
FDO
:
The specified module could not be found
Any ideas?
Gunter
Gunter Becker wrote:
No, these files are from FDO API and Common Binaries under Windows
Binaries. Does it make a difference?
I'll download the SDK files an give this a try!
Gunter
Jackie Ng wrote:
These dlls are from
Jackie Ng wrote:
Do you have the Visual C++ 2008 runtime library installed?
If so, I wonder then if it is because you are using this in an ASP.net
environment and that is somehow messing with the paths?
- Jackie
Gunter Becker wrote:
OK, I tried it with the SDK files and know I
Autodesk replaced DETE with RealDWG in Studio 2009 thus explaining the
different behaviour.
- Jackie
Andy Morsell wrote:
Quote Gordon: Although you can load DWG files, you cannot get OBJECT
DATA,
BLOCK ATTRIBUTES or LINK TEMPLATES.
You used to be able to with Autodesk MapGuide Studio
Are you using the compressed or non-compressed version? Do you get the same
result when you switch?
- Jackie
ary_s wrote:
Hii group,
I'm having with fusion 1.0/2.0 with MGOS 2.1. FusionSF keep on saying
object doesn't supported when i tried to view it on my browser. I would
like to
The simplest method is to make a server-side wrapper, where you generate the
MapGuide session id.
Then redirect to the index.html passing an additional parameter:
Session=your generated session id
- Jackie
Fraser Burgess wrote:
Is there a trick to passing username and password into a URL
Take a look at OpenLayers, it can do object snapping (example:
http://openlayers.org/dev/examples/snapping.html) and can consume MapGuide
layers.
- Jackie
achectl wrote:
I would like to know does the mapguide or mapguide enterprise can be
supporting doing object snap? This is some kind
What does your ReleaseReader() look like?
If it's from the samples, it's supposed to close any open MgFeatureReaders
that may exist in the result returned from MgFeatureService.UpdateFeatures()
- Jackie
sekko970 wrote:
I tryng to add a point to an existing SHP data connection in ASP.Net
Hi All,
For those of you who could not attend FOSS4G 2009, my presentation on FDO
Toolbox is now online.
http://themapguyde.blogspot.com/2009/11/my-foss4g-presentation-recorded-and.html
Many thanks to the folks from FOSSLC for recording this (and many other
presentations) at the event.
-
PHP does not support enums, so all the mapguide constants like MgServiceType,
MgResourceType, etc are stored and defined in the constants.php file in your
mapviewerphp directory.
Have you included this file?
- Jackie
nekad wrote:
Hey guys..
I'm newbie in GIS world
I'm using Mapguide and
MgSelection($map, $_POST['SELECTION']);
$layers = $selection-GetLayers();
it returns nothing, seems like i don't select any area on the map?
can you help me?
Jackie Ng wrote:
PHP does not support enums, so all the mapguide constants like
MgServiceType, MgResourceType, etc are stored
Service is the named SQL Server instance
DataStore is the name of the database
- Jackie
JamesDudden wrote:
Hi,
Can anybody help with the connection properties for
OSGeo.SQLServerSpatial?
What do I need to put in the following fields:
Service
Datastore
Any help is welcomed
Have you tried those filters with the same SDF file in FDO Toolbox?
Filters in FDO are identical to filters in MapGuide. So you can use FDO
Toolbox to test whether your filters produce the expected number of results.
- Jackie
Warren Medernach-2 wrote:
Are there known problems using a
What's probably happening is that your task pane code is interacting with the
map before it has been fully initialized. What you need to do, is to listen
for map initialization in the map frame. This code sample shows how to do
this:
To consume KML/satellite imagery from Google Earth, you must use the Google
Earth client, so the answer is no.
Fusion will have better out-of-the-box commercial map support (Google, Bing,
Yahoo) in the next MGOS release (2.2). Right now it's a bit of a hack.
- Jackie
Amy Steiger wrote:
Does your mysql database have a series of f_ database tables?
I believe the MySQL FDO provider requires these tables to exist, as these
tables store required FDO metadata needed by the provider. These tables
would exist if the MySQL data store was created via FDO. If these tables
don't exist the
Hi Jo,
All localisable UI text strings should be originating from the localized\en
file
- Jackie
Jo Cook wrote:
Dear All,
Is it possible to change the spelling of METER in the ajax viewer status
bar to the british Metre(s)? I have looked in the template files but
can't seem to find
would seem to be the coordinate system of your map.
- Jackie
Jo Cook wrote:
Hi Jackie,
That allows me to change the strings in the viewer options in the task
bar, but not the bottom status bar, as far as I can see- unless I'm
missing something obvious!
Thanks
Jo
Jackie Ng wrote
I think that filter is for stylization/rendering purposes only.
Someone can correct me if need be.
- Jackie
Jamo wrote:
I'm sure I've been here before but here goes it again.
I'm attempting to select a subset of data from a layer .
MgFeatureReader myFeats =
201 - 300 of 2584 matches
Mail list logo