I want to cut commercial and some other part of a recording
once I've recorded the film how can I produce the cut list
I can view the recording and edit it with my remote but do I need to
same some data to a cutlist.file to process it after with mythburn
Could someone explaine a little bit more
On Sun, 2006-01-29 at 09:40 -0500, Claude Gélinas agr. wrote:
I can view the recording and edit it with my remote but do I need to
same some data to a cutlist.file to process it after with mythburn
You create a cutlist for a transcoder by entering edit mode with 'e'
while viewing the recording,
Hi!
On 1/29/06, Claude Gélinas agr. [EMAIL PROTECTED] wrote:
I can view the recording and edit it with my remote but do I need to
same some data to a cutlist.file to process it after with mythburn
As far as I know, the mythburn scripts automatically use the mythtv
cutlist - at least they do
In my opinion it is essential to have a keyboard to edit the cutlist,
I have a knoppmyth boot cd that I use as a frontent to do this very
task. The autogenerated cut list does a decent job, but never perfect
from my experience.
On 1/29/06, Jens Baumeister [EMAIL PROTECTED] wrote:
Hi!
On
On 1/29/06, Jonathan Smith [EMAIL PROTECTED] wrote:
On 1/29/06, Jens Baumeister [EMAIL PROTECTED] wrote:
On 1/29/06, Claude Gélinas agr. [EMAIL PROTECTED] wrote:
I can view the recording and edit it with my remote but do I need to
same some data to a cutlist.file to process it after
As I read it the OP wanted some explanation about the cutlist process,
then processing the video via mythburn. Since Osama did such a good
job describing the editing process, I felt compelled to share some
additional information, an alternative to editing the cutlist should
the author find the
Le dimanche 29 janvier 2006 à 11:32 -0500, Jonathan Smith a écrit :
As I read it the OP wanted some explanation about the cutlist process,
then processing the video via mythburn. Since Osama did such a good
job describing the editing process, I felt compelled to share some
additional
There was a lot of talk about using ProjectX a while back, and I am
pleased with the way it is working. THe only thing missing, is to get
it to use the Myth cutlists. I guess the basis is that I don't
understand what units the cutlists are stored in...
In any case, I did this, with lots of bash
There was a lot of talk about using ProjectX a while back, and I am
pleased with the way it is working. THe only thing missing, is to get
it to use the Myth cutlists. I guess the basis is that I don't
understand what units the cutlists are stored in...
I tried it as I posted before, and I
Again, if anyone else is using ProjectX, with cutlists or not, speak
up. I can see how this might be a good drop-in update to the flakey
MythBurn engine... but will probably need some help, at least people
with some know-how...!
Speak, speak, speak :)
I haven't gotten cutlists to go, but
Hello,
there has previously been a post with this subject:
http://mythtv.org/pipermail/mythtv-dev/2003-November/015978.html
But there is still the same problem for me. I want to delete a quite short
part of a movie. But I am not able to set the second cutpoint because it is
only possible to
11 matches
Mail list logo