On 2/10/06, Ricky Schneberger <[EMAIL PROTECTED]> wrote:
> I got an issue where my graphs stops updating.
>
> Last time it happened I disable the hosts (changes the IP to
> unreachabled IPs) and then chenged them back after an hour.
>
> Today I tried the same thinf, after an recommendation on this
> -Original Message-
> From: [EMAIL PROTECTED] [mailto:nagios-users-
> [EMAIL PROTECTED] On Behalf Of Colm Ennis
> Sent: Friday, February 10, 2006 1:27 PM
> To: nagios-users@lists.sourceforge.net
> Subject: [Nagios-users] notification_interval = 0 and retained state
but
> still get notifi
Can someone give a hand on check_snmp_apc_pdu?
I got this error when I tried to run it:
Use of uninitialized value in substitution (s///) at
./check_snmp_apc_pdu line 139.
Use of uninitialized value in substitution (s///) at
./check_snmp_apc_pdu line 140.
Use of uninitialized value in divisio
I got an issue where my graphs stops updating.
Last time it happened I disable the hosts (changes the IP to
unreachabled IPs) and then chenged them back after an hour.
Today I tried the same thinf, after an recommendation on this list, but
I still got the error. Then I moced the whole Cacti to an
On Fri, 10 Feb 2006, Samantha Edwards wrote:
> First post so please bear with me. I am looking to see if there is
> anyway that I would be able to have nagios accept a HTTP 401 as a valid
> response from a server? I'm running Nagios version 2.0b3 and have only
> been sorting through - here's my c
i use nagios 1.2.
i have set:
notification_interval = 0
for all hosts and services as we only want to be alerted once when a
host/service goes down.
i have many devices/services and so autoprovision nagios config updates
nightly.
in order to load these config changes i restart nagio
Hi Sean,
Am Freitag, 10. Februar 2006 19:51 schrieb Sean Dilda:
> Andre Heine wrote:
> > how can I enable "acknowledgements"?
> >
> > It's posible?
>
> All you have to do is enable external commands. That allows
> commands to be issued from the webpage. And that allows you to
> do acknowledgemen
Andre Heine wrote:
Hello all,
how can I enable "acknowledgements"?
It's posible?
All you have to do is enable external commands. That allows commands to
be issued from the webpage. And that allows you to do acknowledgements
if you click on the host or service that's having a problem.
Hello all,
how can I enable "acknowledgements"?
It's posible?
Thanks && greetings
Andre
---
This SF.net email is sponsored by: Splunk Inc. Do you grep through log files
for problems? Stop! Download the new AJAX search engine that makes
se
On 2/10/06, Toto Capuccino <[EMAIL PROTECTED]> wrote:
> no i mean i never say you did say it didnt
>
CORE DUMP
--Parse error on line #2
:-P
--
"They that can give up essential liberty to obtain a little temporary
safety deserve neither liberty nor safety''
Benjamin Franklin 1775
Hi All
Thanks to Marc for your speedy response! Much appreciated.
Best,
.s
Marc Powell wrote:
-Original Message-
From: [EMAIL PROTECTED] [mailto:nagios-users-
[EMAIL PROTECTED] On Behalf Of Samantha Edwards
Sent: Friday, February 10, 2006 11:11 AM
To: nagios-users@lists.sourceforg
i never say you didnt 2006/2/10, Deborah Martin <[EMAIL PROTECTED]>:
i
never said it didn't!
-Original Message-From: Toto Capuccino
[mailto:[EMAIL PROTECTED]]Sent: 10 February 2006
15:09To: Deborah MartinCc: [EMAIL PROTECTED];
nagios-users@lists.sourceforge.netSubject:
> -Original Message-
> From: [EMAIL PROTECTED] [mailto:nagios-users-
> [EMAIL PROTECTED] On Behalf Of Samantha Edwards
> Sent: Friday, February 10, 2006 11:11 AM
> To: nagios-users@lists.sourceforge.net
> Subject: [Nagios-users] Accepting HTTP 401?
>
> Hello All
>
> First post so please
Hello All
First post so please bear with me. I am looking to see if there is
anyway that I would be able to have nagios accept a HTTP 401 as a valid
response from a server? I'm running Nagios version 2.0b3 and have only
been sorting through - here's my command definition, which I believe is
no i mean i never say you did say it didntoh nevermind2006/2/10, Toto Capuccino <[EMAIL PROTECTED]>:
i never say you didnt 2006/2/10, Deborah Martin <
[EMAIL PROTECTED]>:
i
never said it didn't!
-Original Message-From: Toto Capuccino
[mailto:[EMAIL PROTECTED]]Sent: 10 Februa
On Fri, Feb 10, 2006 at 04:30:04PM +0100, Nick Weisser wrote:
> What is the best or easiest way to test if my notifications for different
> services and hosts are working without really shutting down the server to be
You can submit passive check results via the GUI. Submit enough
to put the service
[EMAIL PROTECTED] wrote:
You don't have access to the $OUTPUT$ variable in the host notification
(I don't even know if it actually exists). You should use $HOSTOUTPUT$
instead (and $SERVICEOUTPUT$ for your service-notify-by-email command)
See http://nagios.sourceforge.net/docs/2_0/macros.html
>You don't have access to the $OUTPUT$ variable in the host notification
>(I don't even know if it actually exists). You should use $HOSTOUTPUT$
>instead (and $SERVICEOUTPUT$ for your service-notify-by-email command)
>See http://nagios.sourceforge.net/docs/2_0/macros.html
Now! It's working!
Bu
> -Original Message-
> From: [EMAIL PROTECTED] [mailto:nagios-users-
> [EMAIL PROTECTED] On Behalf Of Justin Shore
> Sent: Friday, February 10, 2006 9:42 AM
> To: nagios-users@lists.sourceforge.net
> Subject: [Nagios-users] check_wins download
>
> Would someone please point me to the che
> -Original Message-
> From: Andreas Kasenides [mailto:[EMAIL PROTECTED]
> Sent: Friday, February 10, 2006 9:34 AM
> To: Marc Powell
> Cc: nagios-users@lists.sourceforge.net
> Subject: Re: [Nagios-users] Nagios 2 with MySql support
>
> Marc Powell wrote:
>
>
> I did not say anything
Would someone please point me to the check_wins site?
Thanks
Justin
--
Justin Shore, Network Engineer
SKT Business Communication Solutions
Office: (316) 265-9555 x3217
---
This SF.net email is sponsored by: Splunk Inc. Do you grep through
i
never said it didn't!
-Original Message-From: Toto Capuccino
[mailto:[EMAIL PROTECTED]Sent: 10 February 2006
15:09To: Deborah MartinCc: [EMAIL PROTECTED];
nagios-users@lists.sourceforge.netSubject: Re: [Nagios-users]
Additional Info in email notification$OUTPUT$ works
Philip Mark Donaghy wrote:
My first mail was reject and the mailing list confirmation has not
confirmed by subscription. So I am trying to send this again.
I have researched some different ways of
installing nagios on fedora core 4. I saw that the rpm repository has
stuff in the extras fedo
> -Original Message-
> From: [EMAIL PROTECTED] [mailto:nagios-users-
> [EMAIL PROTECTED] On Behalf Of Nick Weisser
> Sent: Friday, February 10, 2006 9:30 AM
> To: nagios-users@lists.sourceforge.net
> Subject: [Nagios-users] Simulating DOWN Scenario
>
> Hi there,
>
> What is the best or
Marc Powell wrote:
-Original Message-
From: Andreas Kasenides [mailto:[EMAIL PROTECTED]]
Sent: Friday, February 10, 2006 1:09 AM
To: Marc Powell
Cc: nagios-users@lists.sourceforge.net
Subject: Re: [Nagios-users] Nagios 2 with MySql support
Marc Powell wrote:
[c
> -Original Message-
> From: [EMAIL PROTECTED] [mailto:nagios-users-
> [EMAIL PROTECTED] On Behalf Of Jody Noscov
> Sent: Thursday, February 09, 2006 11:52 PM
> To: nagios-users@lists.sourceforge.net
> Subject: [Nagios-users] Re: Running the configure Script
>
> I keep getting an error:
Hi there,
What is the best or easiest way to test if my notifications for different
services and hosts are working without really shutting down the server to be
monitored?
Any suggestions or ideas are very much appreciated.
Cheers,
Nick
---
> -Original Message-
> From: Andreas Kasenides [mailto:[EMAIL PROTECTED]
> Sent: Friday, February 10, 2006 1:09 AM
> To: Marc Powell
> Cc: nagios-users@lists.sourceforge.net
> Subject: Re: [Nagios-users] Nagios 2 with MySql support
>
> Marc Powell wrote:
>
[chop]
> Have s
Roberto
NSClient++ includes both NsClient and NRPE
functionality. It listens on the NsClient port as well as on your NRPE port (so
no change need to be made in nagios if you are already using one of these).
The nice thing is that instead of running two
services (nsclient and nrpe) you
$OUTPUT$ works for nagios 1.3 actually.2006/2/10, Deborah Martin <[EMAIL PROTECTED]>:
try the following : essentially instead of using $OUTPUT$, replace with$SERVICEOUTPUT$This works fine for me.define command{command_namenotify-by-emailcommand_line/usr/bin/printf "%b" "
try the following : essentially instead of using $OUTPUT$, replace with
$SERVICEOUTPUT$
This works fine for me.
define command{
command_namenotify-by-email
command_line/usr/bin/printf "%b" "* Nagios
*\n\nNotification Type: $NOTIFICATIONTYPE$\n\nService:
$SERVICED
[EMAIL PROTECTED] wrote:
I have already tried this but I don't to receive Additional Info.
Hi,
try to put something like this in your miscommands.cfg file that should
contact the email notification command :
define command{
command_namehost-notify-by-email
command_line/u
I have already tried this but I don't to receive Additional Info.
What can I do now?
Ths
>Hi,
>try to put something like this in your miscommands.cfg file that should
>contact the email notification command :
>define command{
>command_namehost-notify-by-email
>command_line
Yes, tks.
But there are many plugins fot NRPE on
http://www.nagiosexchange.org/NRPE_Plugins.66.0.html
and I think that I could use them to do many controls.
But I could use also
NRPE with NSClient++ and I have for free many controls….
But,
What are the differences?
Try NSClient++ from
http://nscplus.medin.name/index.php/Main_Page
Depending on your needs and environment you might be able
to use just this and not need nrpe_nt (from
http://www.miwi-dv.com/nrpent/
Cheers,
Phil
Phil RandalNetwork EngineerHerefordshire
CouncilHereford, UK
Hi,try to put something like this in your miscommands.cfg file that should contact the email notification command :define command{ command_name host-notify-by-email command_line /usr/bin/printf "%b" "* Nagios *\n\nNotification Type: $NOTIFICATIONTYPE$\nHost: $HOSTNAME$\
Roberto Raffo wrote:
What is the best way to monitor a windows
2003 server (cpu, disk,
memory, users, event log,) with Nagios?
NsClient? What is the last version? Where I can find it?
Yeo nsclient is cool for monitoring the above services on M$, you can
downloa
What is the best way to monitor a windows 2003 server (cpu, disk,
memory, users, event log,) with Nagios?
NsClient? What is the last version? Where I can find it?
or
NRPE_nt? What is the last version? Where I can find it?
Any idea?
Hi, there
I would to include additional info into email notification!
What can I do?
This is the email that nagios sends me.
Nagios *
Notification Type: PROBLEM
Service: Ping
Host: myhost
Address: IP
State: C
Hi there,
I have nagios (1.3) running on server to monitor two other servers. On
one of these 2 server is the nagios nrpe-server running to allow some
additional checks.
These checks seem to be executed correctly, as the nrpe-server is
regularly logging those:
/
Feb 8 16:47:32 dsxx-xxx-
40 matches
Mail list logo