Hi all ,
I was having a really hard time adding the shortcut to Netscape6 to the
Desktop.
Normally to start it up I would open a console change directory to
/home/mydir/netscape6/package
and then type
'./netscape' (without the qoutes)
and it would start no problem.
.the problem of adding the
"Michael A. Kellogg" [EMAIL PROTECTED] wrote:
Hi Folks!
Well, I don't quite know how I did it, but when I reboot the computer, I'm
only
given a command prompt (login name, password) rather than the nice graphic
screen I was accustom. It's not a big deal, I type startx and get things
going
how can i access my linux even if im in other pc using telnet?.do
need to configure anything on my linux?
This seems weird... :-(
What does it say when you try "cat /proc/sys/net/ipv4/ip_forward"?
If that doesn't give any error, then you must be able to
"echo 1 /proc/.../ip_forward" as root.
If it does give an error, Check that the file exists (ls -l
/proc/sys/net/ipv4/ip_forward) and that the
These are problems that I've had on in the development kernels, not the 2.2 series.
Loosing the inturupt means you have a timming problem. ARE YOU OVER-CLOCKING. Some
MB's and Hard-drives can get the timmng right some can't. What type of hardware are
you running. If Slackware also caused
As root edit the file /etc/inittab and on the line that says 'id:3:initdefault:'
change the 3 to a 5. Also make sure you have a file named 'desktop' in /etc/sysconfig
with one word in it "KDE" in upper case with no quotes.
That should do it.
John
-- Original Message
UDMA-66 is an after thought for the version of the kernel that comes with Mandrake 7.0
even when it asked you had to boot from a floppy. To get it right, you need to
upgrade to 2.3.99-pre9-2. 9-1 crashed my ABIT BP6 hard. 9-2 appears fairly stable.
It also solved some problems with my
Fernando Camacho Olmos wrote:
Please anyone know how to install kde 2.0 when i try to install, that
eliminate the kde.
and what i have to do whith the als 100 sound card when i run sndconfig
it mark one error and i have to put manually instalation.
KDE installs on /opt.
Go throug the
Sorry about this - for some reason, our web-page
subscription/unsubscription just refuses to work. I hope this will be
fixed soon, and in the meantime:
send e-mail containing
unsubscribe newbie
to
[EMAIL PROTECTED]
to unsubscribe. If nessesary, add the e-mail address with which you
you also can go to the /etc/initab.conf file and edit it, so the default
number in wich the linux will star will be 5, that is X mode there is a
way from drake conf too when you can set to start from X11
-Original Message-
From: Michael Holt [SMTP:[EMAIL PROTECTED]]
Sent:
Paul,
Thanks for the heads up. I only venture forth into Bill's world when
forced. So you use Pine, eh? I am comfortable with NS' mail program;
guess if comfort was my criterion I wouldn't be on this list, though, so
where would you point me to in terms of help files, to be able to get it
How can I remove LILO from the Master Boot Sector?.
Regards.
Erick Dennis
C.R.
Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com
is the 2.3.xx kernel a beta or stable release and will it
effect the operation of mandrake if I upgrade my kernel?
Mike
Get your own free email account from
http://www.popmail.com
:~how can i access my linux even if im in other pc using telnet?.do
:~need to configure anything on my linux?
You need telnet-daemon. However, I would suggest you to use "ssh" instead
of telnet.
yours
Denis
--
-
Dr. Denis Havlik
Boot to a Windows boot disk and type fdisk /mbr.
-Chris
On Tue, 16 May 2000, you wrote:
How can I remove LILO from the Master Boot Sector?.
Regards.
Erick Dennis
C.R.
Get Your Private, Free E-mail from MSN Hotmail
On Tue, 16 May 2000, flupke wrote:
This seems weird... :-(
What does it say when you try "cat /proc/sys/net/ipv4/ip_forward"?
If that doesn't give any error, then you must be able to
"echo 1 /proc/.../ip_forward" as root.
If it does give an error, Check that the file exists (ls -l
lilo -U
Notice the Capital U
-=Ron=-
-Original Message-
From: Erick Dennis [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, May 16, 2000 10:16 AM
To: [EMAIL PROTECTED]
Subject: [newbie] Removing LILO from the MBS
How can I remove LILO from the Master Boot Sector?.
Regards.
Erick
Oops, you may not have linux anymore :)
fdisk /mbr
-=Ron=-
-Original Message-
From: Erick Dennis [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, May 16, 2000 10:16 AM
To: [EMAIL PROTECTED]
Subject: [newbie] Removing LILO from the MBS
How can I remove LILO from the Master Boot
2.3.xx is beta.
All odd numbers are beta:
2.2.14
z.y.xx
xx == Release version, it just increments, get the highest one.
yy == Major version, get the even numbers, right now it's 2. Hopefully soon
we'll see 2.4.xx. (If you've got an older computer, you may want to go with
2.0.xx)
z == Really
I did and it just had stupid flash, I have flash already I want shockwave
On Mon, 15 May 2000, you wrote:
If you are trying to use Shockwave in Netscape..might want to try
going to the help section on the left top and choose About Plugins.
Bambi
Vic wrote:
I have tryed (f*ck the
James Little wrote:
Use a generic postscript driver or a laserjet 4/5/6. They'll all work, I've
tried each.
Hi,
Has anyone managed to get one of these working under 2.2.x?
I run Mandrake 7.0 and none of the available filters there will
work
Thanks for any advice
James,
Hi Alan,
I had draw and write this out as there is no print screen. The auto
allocation only works if my disk has not been partitioned yet or is empty.
I have tried as best as possible with ASCII to show my page setting:
I can see in the DrakX installation:
The Setup file systems
Filesystem
On Tue, 16 May 2000, Michael wrote:
Paul,
Thanks for the heads up. I only venture forth into Bill's world when
forced. So you use Pine, eh? I am comfortable with NS' mail program;
guess if comfort was my criterion I wouldn't be on this list, though, so
where would you point me to in terms of
On Mon, 15 May 2000, Michael Holt wrote:
but I would like to reset my initial boot in to a graphic format. Any ideas?
Go to the Drakconf icon on your desktop and select X configurator. From
there, after you select your screen resolution, you are given the option
to boot directly into X
On Mon, 15 May 2000 [EMAIL PROTECTED] wrote:
Also, why is it so important to have Wordperfect in addition to Star Office
(or visa versa)?
I'm used to Word Perfect (and have a book about half-done with it) and I
like it. I would also like to have a spread-sheet program under Linux. I'm
Is there a good way to re-autogen the Gnome menus?
-=Ron=-
What floppy?
a blank floppy ? In the past I inserted a blank floppy and it said ramdisk
failed. Is this an important step?
Kenny
_
NetZero - Defenders of the Free World
Click here for FREE Internet Access and Email
Hi I installed a Quantum Fireball dma66 (maximum speed)
10 Gb hard drive, and I was wondering, since linux supports
dma33 pretty much and the motherboard is dma33 capable,
how can I know its running at this speed?
It does run faster than the old regular ide drive that
I had in there, but I just
Romandelete hda5 and then push the Auto Allocate button.
Alan
Romanator wrote:
Hi Alan,
I had draw and write this out as there is no print screen.
The auto allocation only works if my disk has not been
partitioned yet or is empty. I have tried as best as
possible with ASCII to
Okay. I'll give it a go.
Roman
Alan Shoemaker wrote:
Romandelete hda5 and then push the Auto Allocate button.
Alan
Romanator wrote:
Hi Alan,
I had draw and write this out as there is no print screen.
The auto allocation only works if my disk has not been
partitioned yet or
On Tue, 16 May 2000, Kenny wrote:
What floppy?
a blank floppy ? In the past I inserted a blank floppy and it said ramdisk
failed. Is this an important step?
Kenny
It would help if you also mention at what time this appears...
Paul
)0(---)0(
Law of Life's
Vic wrote:
Hi I installed a Quantum Fireball dma66 (maximum speed)
10 Gb hard drive, and I was wondering, since linux supports
dma33 pretty much and the motherboard is dma33 capable,
how can I know its running at this speed?
It does run faster than the old regular ide drive that
I had in
i'm looking to put in a second hdd on my computer. i want it to run with
linux. currently, i'm running a dual boot system with windoze 98, and
mandrake 7.0. how do i go about doing this?
jd
Get Your Private, Free E-mail
Is there a simple way to save to a file what a command like 'dmesg' gives me on
the screen?
Michael Coady
Run *WITH* Linux, or Run *AS* linux?
Meaning, do you just want linux to access it, keeping everything the same,
or do you just want more space in linux?
-=Ron=-
-Original Message-
From: J D [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, May 16, 2000 3:09 PM
To: [EMAIL
Dear Paul,
thank you for your e-mail. What is ISDN4Net ? Is it a software ? A
configuration tool? Or an URL in the WWW ?
With kind regards
Christian
My problem is that I can't find these files.There is no directory
/isdn/profile on my PC.
Find the ISDN4Net setup on the net. If you want, mail
It occurs right after it asks which directory the rpms are in
On Tue, 16 May 2000, Kenny wrote:
What floppy?
a blank floppy ? In the past I inserted a blank floppy and it said
ramdisk
failed. Is this an important step?
Kenny
It would help if you also mention at what time this
Hooray!! I am up and running. However, the the desktop display has a larger black
border on the left side
rather than sitting evenly in the center. My hard drive, sound card auto configured,
except for the
monitor. An out-of-sync message appeared. The desktop display is lopsided the left
Hi.
Not only is kfm not running when I am connected (see last
e-mail) now it is running really really slow.
I know I don't have a big fancy processor - Cirrus MII
but it was definately running faster than this a few days back
and no I haven't downloaded anything from the internet nor have
I
Hi Alan,
The monitor works fine in Windows NT4. The shift happens in as soon as I get in to KDE.
Roman
Alan Shoemaker wrote:
Romanadjust your monitor (buttons on front, directions in
monitor owner's manual).
Alan
Romanator wrote:
Hooray!! I am up and running. However, the the
Dear friends:
May I please ask for your help with what I am sure is a very minor
configuration error which makes it impossible for me to print using
ghostscript.
As is often the case, I did something I shouldn't do, but I am sure I
corrected it. Still, whatever I did messed up my printer
41 matches
Mail list logo
