been to collect the data from the RPi's GPIO using python
> and then send them to pd using OSC.
> I'm starting to write small tutorials explaining what I've been through,
> if you use the RPi too I'd be happy to point them to you.
>
> Have fun,
> Alex
>
>
>
o far.
>>>>
>>>>As to get the infos to pd, I've been using these sensors with a raspberry
>>>>pi.
>>>>My option has been to collect the data from the RPi's GPIO using python and
>>>>then send them to pd using OSC.
>>>>
On 2013-03-12 09:32, Julian Brooks wrote:
Hi Martin,
Is this with Maxbotic and if so which one? I'm going to be running the
sensor with an RPi as standalone so presume it's a similar setup (I
believe comport runs fine on RPi)
I use the MB1010 (MaxSonarEZ1). The analog output is very low leve
's GPIO using python
> and then send them to pd using OSC.
> I'm starting to write small tutorials explaining what I've been through,
> if you use the RPi too I'd be happy to point them to you.
>
> Have fun,
> Alex
>
>
> --
> *De :* Julian Brooks
>
as been to collect the data from the RPi's GPIO using python and
>>then send them to pd using OSC.
>>I'm starting to write small tutorials explaining what I've been through, if
>>you use the RPi too I'd be happy to point them to you.
>>
>>
>
explaining what I've been through,
> if you use the RPi too I'd be happy to point them to you.
>
> Have fun,
> Alex
>
>
> ----------
> *De :* Julian Brooks
> *À :* PD List
> *Envoyé le :* Mardi 12 mars 2013 13h58
> *Objet :* [PD] U
.
I'm starting to write small tutorials explaining what I've been through, if you
use the RPi too I'd be happy to point them to you.
Have fun,
Alex
De : Julian Brooks
À : PD List
Envoyé le : Mardi 12 mars 2013 13h58
Objet : [PD] Ultrasonic Range
Hi Martin,
Is this with Maxbotic and if so which one? I'm going to be running the
sensor with an RPi as standalone so presume it's a similar setup (I believe
comport runs fine on RPi)
Would you mind letting me have a look at a patch for translating the input
data (if you use/need one). I know f
On 2013-03-12 08:58, Julian Brooks wrote:
Hi,
I'm after some advice:
For an installation piece I'd like to do I'm investigating range finder
sensors (for outdoors).
Has anyone experience of the Maxbotic URF's and any tips they'd like to
share for getting the data into Pd?
I connect them to
Hi,
I'm after some advice:
For an installation piece I'd like to do I'm investigating range finder
sensors (for outdoors).
Has anyone experience of the Maxbotic URF's and any tips they'd like to
share for getting the data into Pd?
Cheers,
Julian
___
10 matches
Mail list logo