https://bugs.launchpad.net/qemu/+bug/1894869
Here's the discussion with the upstream devs. The problem ended up being
on Chelsio's part as either the .7 funciton fo these cards should not
have even been exposed to the OS in the first place, or SR-IOV is
necessary to actually correct the parameters
I was able to boot a VM with just the functions of the device with the
ethernet controller function ID added as PCI devices. Something I
noticed while adding in those devices though is that all of the others
have a description associated with them in Proxmox, but the one that's
causing the boot to
Yeah, I figured out that the logic behind that patch was failed and
corrected it to get the same error again already. Just to clarify, it is
two of the same card giving the same error. I ran dmesg --level=err, but
got no output. In the full output of dmesg, though, I noticed that there
are some pro
** Bug watch added: bugzilla.proxmox.com/ #2969
https://bugzilla.proxmox.com/show_bug.cgi?id=2969
** Also affects: debian via
https://bugzilla.proxmox.com/show_bug.cgi?id=2969
Importance: Unknown
Status: Unknown
--
You received this bug notification because you are a member of qe
** Description changed:
There exists a bug with Chelsio NICs T4 that causes the following error:
kvm: -device vfio-
pci,host=:83:00.7,id=hostpci1.7,bus=pci.0,addr=0x11.7: vfio
:83:00.7: hardware reports invalid configuration, MSIX PBA outside
of specified BAR
- I was workin
Public bug reported:
There exists a bug with Chelsio NICs T4 that causes the following error:
kvm: -device vfio-
pci,host=:83:00.7,id=hostpci1.7,bus=pci.0,addr=0x11.7: vfio
:83:00.7: hardware reports invalid configuration, MSIX PBA outside
of specified BAR
I was working with a downstream
