Re: [q] Recovery Tools for a Quad 800?

not use. (came with a Mac I got) I can image the disc and send you it to burn to cd if you want. If you have cable it should not be to big a download. Let me know vicki -- Quadlist is sponsored by http://lowendmac.com/ and... Small Dog Electronicshttp://www.smalldog.com | Enter To Win

[q] use for an lc 475

can find a place for this in the home some where. vicki PS.. no fish bowl and stand ideas! or door stops..! Remember this Mac works fine just needs a keyboard. -- Quadlist is sponsored by http://lowendmac.com/ and... Small Dog Electronicshttp://www.smalldog.com | Enter To Win A | -- Canon

[q] lists

Hi my isp has been off line for email for 1 day and 20 hrs will i need to re sub to the list as i am now not getting any mail. vicki -- Quadlist is sponsored by http://lowendmac.com/ and... Small Dog Electronicshttp://www.smalldog.com | Enter To Win A | -- Canon PowerShot Digital Cameras

[q] GV 56K Modem

it for you and send it in the morning if you like. Vicki in UK -- Quadlist is sponsored by http://lowendmac.com/ and... Small Dog Electronicshttp://www.smalldog.com | Enter To Win A | -- Canon PowerShot Digital Cameras start at $299 | Free iBook! | Support Low End Mac http

Re: Me again

Hi What type of cd media are you using because I have found that any of my macs with a 6x or less cd drive will not recognise the cdrw media and only some of the cdr media. For best results I have found that the imation cdr 700/80 min cd's work fine. vicki -- Quadlist is sponsored by http

Re: Srtange lines on screen w/Supermac Thunder II GX - is the VRAM bad?

6400 if the cable is knocked it unseats the card slightly a quick push down and the card is re-seated Lines disappear and back to normal. Also used to get it with the 840av I had that turned out to be bad vram. Vicki -- Quadlist is sponsored by http://lowendmac.com/ and... Small Dog

Upgrade

Hi all I have a quad 800 that I am about to fully upgrade to G3 via a motherboard swap and a processor swap. Can I transplant the 800 board into a 650 case. If so is there any mods I will have to do TIA Vicki -- Quadlist is sponsored by http://lowendmac.com/ and... Small Dog

Re: VRAM and the Q650/800

they can be used in the quads. The 512k simms are seen as 256k in the 800. No the 800 mother board can not see more than 1mb even using the 512k simms. Vicki -- Quadlist is sponsored by http://lowendmac.com/ and... Small Dog Electronicshttp://www.smalldog.com | Enter To Win A | -- Canon

Re: How to format HD on LC III

, George go to the apple archive and down load a boot-disc file for 7 and the format from that or connect an external cdrom to it and boot from an os cd if you have one then re-install from scratch. vicki -- Quadlist is sponsored by http://lowendmac.com/ and... Small Dog Electronicshttp

Quadra 800

Hi all need a few questions answered. I have a quad 840av that i use for home video and it runs excellent so when i seen a 800 advertised i went out and got it also there was a 7100/80 there so that came home aswell. Now on removeing the cases i found that the two are alike inside when it

Re: 840av

Hi Pickle ok i did what you said and set it for 115200 and it says that it is connecting at that speed but the download speed of web pages is the same. Whats the max port speed for the 840av modem port. and how can i find the correct modem speed thanks Victoria -- Quadlist is sponsored by

840AV

Hi all Need some help with my 840av i have it set up to run my video camera through the back, and then send the pics i collect to a printer via my 7300 this morning the mouse has started to jump. and the cable to my keyboard is loose enough to move a couple of mils any direction. do the adb

Re: Hello, Quadlisters!

Hi All Thaks for all the info To Mark Yes there is three drives in there I put them in. i should have said when i got the case it was bare so i fitted all the drives and cd and ram but i have a couple of macs at my sisters that i intend to take bits out of . The bottom two drives are stack

Re: 630

Hi i have just checked the board in my 630 and the slot where i have the ethernet card is the same as the LC475 i have also the ram slot has a row of solder spots for a second slot but (no second slot), Every time i start with the cd fitted the system freezes. i can put a scsi drive in the

Re: New to the list

David Schultz wrote: Im also new to the list, just yesterday and already I need someone to please clarify, is the pickle a bot or a real person, so I can either filter his posts to the trash or get off the list now because of his annoying snips. DVS Hi just my two pennies worth i have

Re: RasterOps Colorboard 264

Tina Holm wrote: At 19:57 -0400 07/06/02, [EMAIL PROTECTED] wrote: If you don't get the RasterOps splash at boot time, there's something wrong with the board. I had an old Radius card once that required pressing a key during the first boot, maybe there's something similar for this card?