I have some sunpower modules available from a deal i had that deid on the
vine contact me off list if interested, as i recall there are over 132
modules new in the box
Jerry
___
List sponsored by Redwood Alliance
List Address: RE-wrenches@lists.re-wrench
t;>>>> carries the combustion products to a suitable exterior location
>> >>>>> for dilution with ambient air. With the advent of power vented
>> >>>>> combustion appliances, a direct vent (one that takes in
>> >>>>> co
-wrenches-boun...@lists.re-wrenches.org] On Behalf
Of Benn Kilburn
Sent: Thursday, September 25, 2014 7:40 PM
To: RE-wrenches
Subject: Re: [RE-wrenches] Modules over vents
I'll echo what Matt suggests about not relying on an inspector (electrical or
plumbing) to "catch" this.
-wrenches [mailto:re-wrenches-boun...@lists.re-wrenches.org] On Behalf
Of Benn Kilburn
Sent: Thursday, September 25, 2014 7:40 PM
To: RE-wrenches
Subject: Re: [RE-wrenches] Modules over vents
I'll echo what Matt suggests about not relying on an inspector (electrical or
plumbing) to "c
>>>>> install any power vented appliance in a freezing climate. (Power
> >>>>> vented appliances come in both condensing and non-condensing
> >>>>> flavors-they can penetrate the side wall or the roof).
> >>>>> Originally, two separate pipes
e exhaust flow is
> >>>>> hindered/diverted/redirected by an inappropriately located solar
> >>>>> module combustion gasses will be re-ingested into the intake air.
> >>>>> Not good for equipment performance. My understanding is the power
> >>>>> vented appliance
an simplify some installations by putting the exhaust pipe
>>>>> inside a larger air intake pipe allowing for one, albeit larger,
>>>>> penetration. As you might imagine if the exhaust flow is
>>>>> hindered/diverted/redirected by an inappropriately loca
e manufacturer dictates what kind of separation/clearances are
>>>> needed with their product. My guess is you find they want at least a foot
>>>> of separation between the top of the " inverted cone" and the module.
>>>> Probably not what you had in mind for an ae
doubt you could see what the plan checker or inspector
thinks. Best, August -Original Message- From: August
Goers [mailto:aug...@luminalt.com] Sent: Tuesday, September
23, 2014 4:15 PM To: 'RE-wrenches' Subject: RE:
[RE-wrenches] Modules over vents
ng installation.
>>
>> I hope this helps,
>>
>> Bill Loesch
>> Solar 1 - Saint Louis Solar314 631 1094
>>
>> On 23-Sep-14 6:54 PM, August Goers wrote:
>>
>> Bruce and All,
>>
>> Sorry, I hit send before I had a chance to comple
un...@lists.re-wrenches.org] On
> Behalf Of Bill Loesch
> Sent: Wednesday, September 24, 2014 5:38 AM
> To: RE-wrenches
> Subject: Re: [RE-wrenches] Modules over vents
>
>
>
>
> Bruce, August, et al,
>
> This is but one more example of confusing terminology. A
l Message-
From: August Goers [mailto:aug...@luminalt.com]
Sent: Tuesday, September 23, 2014 4:15 PM
To: 'RE-wrenches'
Subject: RE: [RE-wrenches] Modules over vents
Bruce,
I'll send you the CA plumbing code vent section offlist (attachment too
large for this list). The way I read the code
ugust
-Original Message----- From: August Goers
[mailto:aug...@luminalt.com] Sent: Tuesday, September 23, 2014
4:15 PM To: 'RE-wrenches' Subject: RE: [RE-wrenches] Modules over
vents Bruce, I'll send you the CA plumbing code vent section
offlist (attachment to
o:re-wrenches-boun...@lists.re-wrenches.org] On
Behalf Of Bill Loesch
Sent: Wednesday, September 24, 2014 5:38 AM
To: RE-wrenches
Subject: Re: [RE-wrenches] Modules over vents
Bruce, August, et al,
This is but one more example of confusing terminology. A plumbing vent is
not an exhaust vent!
ding condensing boiler PVC vents. Once again, if in doubt you
> could see what the plan checker or inspector thinks.
>
> Best,
>
> August
>
> -Original Message-
> From: August Goers [mailto:aug...@luminalt.com ]
> Sent: Tuesday, September 23, 2014 4:15 PM
> To: &
t you
could see what the plan checker or inspector thinks.
Best,
August
-Original Message-
From: August Goers [mailto:aug...@luminalt.com]
Sent: Tuesday, September 23, 2014 4:15 PM
To: 'RE-wrenches'
Subject: RE: [RE-wrenches] Modules over vents
Bruce,
I'll send you the CA
doubt you
could see what the plan checker or inspector thinks.
Best,
August
-Original Message-
From: August Goers [mailto:aug...@luminalt.com]
Sent: Tuesday, September 23, 2014 4:15 PM
To: 'RE-wrenches'
Subject: RE: [RE-wrenches] Modules over vents
Bruce,
I'll send you
hese. You might
want to check in with your plan checker.
Best,
August
Luminalt
-Original Message-
From: RE-wrenches [mailto:re-wrenches-boun...@lists.re-wrenches.org] On
Behalf Of Bruce Leininger
Sent: Tuesday, September 23, 2014 3:49 PM
To: RE-wrenches
Subject: [RE-wrenches] Modules ove
We were given the go-ahead from a home builder whom we are doing lots of work
for, to cover attic vents on their roofs, if necessary. These are typically
about 4" off the roof.
I suspect covering plumbing vents may be ok as well but I'd be doubtful about
combustion vents.
Did you mean 1.5" or
Hi all. We're designing a system on a roof that is literally infested
with plumbing, exhaust and combustion vents. The combustion vents are
PVC and none of the vents are more than 1.5' above the roof.
A racking company says that we can cover them with modules, since the
modules will be at le
Apparently, there is risk of junction boxes melting down and possible fires
(related especially BIPV) so I need to replace this module with something
electrically compatible and since it is on a tracker, with a similar
footprint:
Scheuten Multisol P6-54c
Any ideas?
39" x 59"
6 x 9 cells
Suniva
Sent by Jeremy's iPhone. Sorry for typos and shorthand!
On May 30, 2013, at 5:49 PM, jay peltz wrote:
> A question about US made modules.
>
> Who actually makes the cells here in the us?
>
> Only 2 that i know of, I"m sure there are more.
> Solar world.
> First solar
>
> who else?
>
> [mailto:re-wrenches-boun...@lists.re-wrenches.org] On Behalf Of Bill Hoffer
> Sent: Thursday, May 30, 2013 4:54 PM
> To: RE-wrenches
> Subject: Re: [RE-wrenches] modules
>
> Jay
>
> Suniva cells made in Georgia, modules made in China. Have been qualified
> AR
elbaum
AEE Solar
From: re-wrenches-boun...@lists.re-wrenches.org
[mailto:re-wrenches-boun...@lists.re-wrenches.org] On Behalf Of Bill Hoffer
Sent: Thursday, May 30, 2013 4:54 PM
To: RE-wrenches
Subject: Re: [RE-wrenches] modules
Jay
Suniva cells made in Georgia, modules made in China. Have been
Jay
Suniva cells made in Georgia, modules made in China. Have been qualified
ARRA compliant...which means nothing of course since anyone signing onto
any trade agreement with the US is exempt from it, including Tiawan ( that
is why most cells are made there "officially")
Bill
On Thu, May 30, 2
A question about US made modules.
Who actually makes the cells here in the us?
Only 2 that i know of, I"m sure there are more.
Solar world.
First solar
who else?
thanks,
jay
peltz power
___
List sponsored by Home Power magazine
List Address: RE-wre
RE-wrenches
Subject: Re: [RE-wrenches] Modules approved for horizontal mounting
The problem they'll have with a completely flat module is that rain won't
wash the dust off.
Kent Osterberg
Blue Mountain Solar, Inc.
www.bluemountainsolar.com
On 4/20/2013 10:09 PM, Benn Kilburn - DayStar
ystarsolar.ca>>
Reply-To: RE-wrenches <mailto:re-wrenches@lists.re-wrenches.org>>
Date: Friday, April 19, 2013 11:04 PM
To: RE-wrenches <mailto:re-wrenches@lists.re-wrenches.org>>
Subject: Re: [RE-wrenches] Modules approved for horizontal mounting
Carl,
Each specific m
"Benn @ DayStar"
Reply-To: RE-wrenches
Date: Friday, April 19, 2013 11:04 PM
To: RE-wrenches
Subject: Re: [RE-wrenches] Modules approved for horizontal mounting
> Carl,
> Each specific module install instruction guide should state the acceptable
> mounting attachment p
Carl,
Each specific module install instruction guide should state the acceptable
mounting attachment points.
benn
Sent from a 'smart' phone, with touch screen keys. Please excuse shortcuts and
typos.
On 2013-04-19, at 7:27 PM, Carl Adams wrote:
> Hello wrenches,
>
> I have a request for qu
Hello wrenches,
I have a request for quote, which shows modules mounted horizontally on a
supporting structure. This is being done more for show than production
obviously. The approved modules in the bid spec are Sharp, Renesolar, LDK,
and Trina.
Does anyone know if these modules are approved,
Jeff,
Hey I am on a project (600kw) down here in American Samoa, and we are using
SolarWorld 240's. They were recommended to us by Inter Island Solar in
Hawaii. As of Jan 2010 SolarWorld had no disclaimer on their modules.
On Tue, Oct 26, 2010 at 6:34 AM, Jeff Yago wrote:
> Most of our centra
Jeff,
Just saw an ad in my new Photon magazine for Centrosolar America Inc.
C-Series modules, that is already in use in Europe, which is now available
in the U.S. It claims resistance to extensive salt-spray testing, with no
apparent corrosion after a 60 day saline atmosphere test, even on scratche
Most of our central Virginia solar projects are not near saltwater, but Virginia does have a long eastern coastline on the ocean and we do get a few calls from time to time where salt corrosion is a problem. Just starting a new proposal where ocean salt corrosion is an issue and noticed that most
-769-9037
From: Marco Mangelsdorf
To: RE-wrenches
Sent: Wed, September 1, 2010 10:14:11 AM
Subject: [RE-wrenches] modules and inverter poll
What is your no. 1 preferred PV module manufacturer and why?
I’m not looking for a dissertation, but a sentence or two
What is your no. 1 preferred PV module manufacturer and why?
I'm not looking for a dissertation, but a sentence or two.
And while I'm at it, how about inverter manufacturer as well?
I'll tabulate all the answers for those interested.
Thanks,
marco
__
This is another example of the manufacturers doing whatever and let the installers just deal with it. We just finished a campus wide lighting of all remote signage with custom solar lighting systems. We made up pre-packaged mini-pole mounts with the modules attached so when we got out on site th
Hello, Marv & all~
I assumed that "pv wire" versus regular XLPE wire was non-relevant for the
Enphase inverter architecture. Did that change...or will it change in the
near future?
If I'm asking before Enphase is ready to answer that's OK, but kindly post
an update to this topic when the time is
Esteemed wrenches,
Any assistance here would be greatly appreciated.
Does anybody know of a comprehensive list that tells what modules have
PV wire and which ones have only USE2? The thought of contacting every
PV module manufacturer and extracting this information from them is
very daunting
locations, but you would
not have the module manufactures blessing, and it also assumes the frames are
designed to be loaded on the ends, some modules clearly are not so designed
Darryl
--- On Thu, 9/24/09, Glenn Burt wrote:
> From: Glenn Burt
> Subject: Re: [RE-wrenches] Modules Supporte
ches@lists.re-wrenches.org
Subject: [RE-wrenches] Modules Supported only at Short End
Hello Wrenches,
Typical PV modules installation instructions show modules being supported
with two supports each spaced 25% of module length in from the short edge of
the module. I'm looking for informat
some sharp modules, not all.
--- On Thu, 9/24/09, swingjunkie wrote:
> From: swingjunkie
> Subject: [RE-wrenches] Modules Supported only at Short End
> To: RE-wrenches@lists.re-wrenches.org
> Date: Thursday, September 24, 2009, 10:23 AM
> Hello Wrenches,
>
> Typical PV
Hello Wrenches,
Typical PV modules installation instructions show modules being
supported with two supports each spaced 25% of module length in from
the short edge of the module. I'm looking for information on PV
modules which can be supported on a mounting structure using only the
short edge of
43 matches
Mail list logo
