Hi Adam,
Like I mentioned yesterday I got my squid 2.5 running on IPCop.
Took awhile to figure out the new configuration and I finally
got it up running. Thanks so very much for all your inputs.
Couldn't have done it without them.
I found that with the new Squid, I have partial success
with
The FAQ knows all...
http://www.squid-cache.org/Doc/FAQ/FAQ-6.html
-Original Message-
From: Fadjar Tandabawana [mailto:[EMAIL PROTECTED]
Sent: Thursday, October 30, 2003 6:31 AM
To: [EMAIL PROTECTED]
Subject: [squid-users] Squid log format
Dear Gurus,
Is there anyone know the squid
On Thu, 30 Oct 2003, Fadjar Tandabawana wrote:
Dear Gurus,
Is there anyone know the squid log format in access.log?
Yes, and it is fully documented in the Squid FAQ.
Regards
Henrik
Fine !!!
Can either project be used in a production environment, to integrate a
antivirus solution to Squid (Symantec´s Scan Engine for Linux)?
Regards,
Carlos.
On Tue, 28 Oct 2003 [EMAIL PROTECTED] wrote:
I have been reading about ICAP and Squid, but was not able to find
anything
Fine !!!
Can either project be used in a production environment, to integrate a
antivirus solution to Squid (Symantec´s Scan Engine for Linux)?
Regards,
Carlos.
On Tue, 28 Oct 2003 [EMAIL PROTECTED] wrote:
I have been reading about ICAP and Squid, but was not able to find
anything
Hi folks,
got a bit further with my squid - winbind - nt - seamless login problem, but squid is
still showing n error and the prompt is
also still showing up.
Here are the error messages:
[EMAIL PROTECTED] root]# /etc/rc.d/init.d/squid restart
Stopping squid: 2003/10/30 10:41:59| Parsing
[EMAIL PROTECTED] wrote:
Hi folks,
got a bit further with my squid - winbind - nt - seamless login problem, but squid
is still showing n error and the prompt is
also still showing up.
Here are the error messages:
[EMAIL PROTECTED] root]# /etc/rc.d/init.d/squid restart
Stopping
There is a good one at:
http://en.tldp.org/HOWTO/TransparentProxy.html
I hope this helps.
-MBUCK
[EMAIL PROTECTED] 10/30/03 08:49AM
I'm sure there's a faq or a specific document on setting up squid to
run
transparently. I cannot find it.
Can someone point me to one?
Regards,
Tim Rainier
Thank you.
Unfortunately, it seems we can't use transparency mode, for two reasons.
The first is authentication. That howto specifically says that you cannot
use authentication via transparency.
The sole purpose of us using the proxy is for authentication.
The second is because of https. We
On Thu, 30 Oct 2003 [EMAIL PROTECTED] wrote:
Here are the error messages:
[EMAIL PROTECTED] root]# /etc/rc.d/init.d/squid restart
Stopping squid: 2003/10/30 10:41:59| Parsing Config File: Unknown authentication
scheme 'ntlm'.
You have not enabled support for the ntlm scheme when you
On Thu, 30 Oct 2003 [EMAIL PROTECTED] wrote:
[] --enable-basic-auth-helpers=LDAP, NCSA, PAM, SMB, SASL, MSNT
--enable-ntlm-auth-helpers=SMB,winbind
--enable-external-acl-helpers=ip_user, ldap_group, unix_group, wbinfo_group,
winbind_group
How can I get ntlm support without
On Thu, 30 Oct 2003 [EMAIL PROTECTED] wrote:
The first is authentication. That howto specifically says that you cannot
use authentication via transparency.
Correct.
Interception abuses fundamental TCP/IP design properties, and can not
solve all problems. It is generally an evil hack.
The
Hi all,
I´m needing a documentation to configure Squid through Webmim (Free
BSD). I´m a beginner with Linux world.
Someone can help me?
Tks in advance.
Dan Pinheiro
Brasil
Look at http://www.swelltech.com/support/webminguide/.
As a Linux newcomer, I found this to be a great, really
useful book.
It helps, of course, if you understand the program you're
webminning first.
hth,
Yosi
-Original Message-
From: Dan Pinheiro (CPD) [mailto:[EMAIL PROTECTED]
Sent:
I am able to successfully use MSN messenger with the new
proxy. But I still have the same problem with yahoo
messenger.
I was just wondering: MSN allows you to specify
user-authentication (user/password/realm) in its sign-in
options whereas yahoo doesn't.
Do you think that could be the
Thanks again for the help, Henrik.
I got squid3 to compile and install, now having trouble getting it to
work.
in squid.conf in ver. 3, these are the options I have made:
https_port 443 cert=/etc/openssl/cacert.pem
key=/etc/openssl/privkey.pem accel defaultsite=owa.clinedavis.com
3. I need the replacement and changing of these proxies to be as
dynamic as possible
Don't quite get what the requirement is here... care to give a few
examples what you refer to by as dynamic as possible.
What I meant by this was the ability to change the list of parents, if
possible
Hello List,
I have a problem with a transparent squid cache, which I made using the
regular REDIRECT target for all http traffic to destination port 80. The
thing is, the cache works fine with the proxy port specified in the
browsers of all the windows machines (unfortunately only windows clients
On Thu, 30 Oct 2003, Roger Joseph wrote:
Sorry about the personal email but it was not really list related.
What makes this not list related?
Is there a place that list out the features different between
Squid /2.5 Stable 1 vs Squid Stable 5 or later versions. What was
improved. Should I
On Thu, 30 Oct 2003, Adeoye Oke wrote:
What I meant by this was the ability to change the list of parents, if
possible dynamically, say by reading a new set of parents, from a file
or list specified somewhere, in the event that one or more of the
existing parents goes offline. This is also
On Thu, 30 Oct 2003, Jonathan Giles wrote:
in squid.conf in ver. 3, these are the options I have made:
https_port 443 cert=/etc/openssl/cacert.pem
key=/etc/openssl/privkey.pem accel defaultsite=owa.clinedavis.com
cache_peer owa.clinedavis.com parent 80 0 no-query front-end-https=on
On Thu, 30 Oct 2003, Adeoye Oke wrote:
on this network, but once the proxy is not specified (transparent mode)
all secure sites seem not to be accesible, though I have SNAT to the
internal network allowing forwarding to all internal machines on all
ports. I don't know what could be wrong, I
On Thu, Oct 30, 2003 at 11:40:08PM +0100, Henrik Nordstrom wrote:
What is wrong with modifying squid.conf and issuing a squid -k
reconfigure?
Because it can be seen as an interruption to service - squid actually
appears to refuse requests for a short period when it is reconfiguring
some
On Thursday 30 October 2003 07:34 pm, Brett Lymn wrote:
On Thu, Oct 30, 2003 at 11:40:08PM +0100, Henrik Nordstrom wrote:
What is wrong with modifying squid.conf and issuing a squid -k
reconfigure?
Because it can be seen as an interruption to service
Then a better solution might be some kind
On Thu, Oct 30, 2003 at 08:33:03PM -0500, Adam Aube wrote:
Then a better solution might be some kind of hardware load balancer or
clustering.
Or just schedule the reloads for out of hours, since we are not a 24/7
operation that is ok for us but it does limit when we reconfigure our
squid.
Greetings!
I tried grc.com's security scanner and found this:
Accept: image/gif, image/x-xbitmap, image/jpeg, image/pjpeg,
application/vnd.ms-powerpoint, application/vnd.ms-excel, application/msword,
application/x-shockwave-flash, */*
Accept-Language: en-ph
Connection: keep-alive
Host:
Wups! Sorry for emailing quickly without checking the conf for myself. :)
# TAG: forwarded_for on|off
# If set, Squid will include your system's IP address or name
# in the HTTP requests it forwards. By default it looks like
# this:
#
# X-Forwarded-For:
hi,List
What a terrible!
The disk space of Squid server has already been exhausted.
I want to zeroize cache files. I just run squid -z, no effect,
How to do?
**
Li Wei ^-^ HAVE A GOOD DAY ^-^
JFTT
E-mail: [EMAIL PROTECTED]
You need to remove the sub-directories within your Squid cache before
running squid -z. But remember that Squid doesn't just fill up and stop -
older stuff will get moved out to make room for newer objects.
Jeff
--
Jeff Richards
Technical Consultant
Unix Enterprise Services
[EMAIL PROTECTED]
hello,
there is anyway to run squid with all connection between client and
proxy encrypted via ssl certificate ?
i whant to encrypt all traffic between my client and the proxy event if
the client browse only http site . . .
not proxy accelerator mode, i need squid cache mode.
30 matches
Mail list logo
