On 23/07/11 00:09, Ragheb Rustom wrote:
Dear Markus and Amos,
I have done the changes you have proposed. I have dropped the max-size on COSS
partition to 100KB so the COSS cache_dir line now reads as follows:
cache_dir coss /cache3/coss1 11 max-size=102400 max-stripe-waste=32768
block-siz
On 23/07/11 02:15, Franco, Battista wrote:
Hello
In to access.log there are many 503 see an example below.
P.S. on my LAN there is another server with squid 2.6 Stable16 and it works
without problem
1311340425.016 63101 10.239.57.89 TCP_MISS/503 4297 GET
http://ad.it.doubleclick.net/adj/hp
On 23/07/11 04:24, Ritter, Nicholas wrote:
I should add one important point. When the error occurs, it is most
often not affecting the entire site nor transaction. This is to say that
I can visit a site, get content, and then at some point fill out a form
on the site, which then generates the 502
On 23/07/11 07:53, Renjith T wrote:
For a particular use case of ours - we are looking a scenario, where if
the url matches a particular pattern
http://myproxy.mysite.com/a/ , we would like to route the
traffic to a given set of proxies behind the scenes, (and similarly, a
different set of proxie
On 23/07/11 09:49, Dan Ford wrote:
We have our cache setup in the following manner:
cache_dir ufs /cache_dir 10 16 256
refresh_pattern . 10512000 100% 10512000
While testing everything looked good but after putting a bit of load on
the cache we're seeing a lot of RELEASE entries in the log
We have our cache setup in the following manner:
cache_dir ufs /cache_dir 10 16 256
refresh_pattern . 10512000 100% 10512000
While testing everything looked good but after putting a bit of load on
the cache we're seeing a lot of RELEASE entries in the log (non
For a particular use case of ours - we are looking a scenario, where if
the url matches a particular pattern
http://myproxy.mysite.com/a/ , we would like to route the
traffic to a given set of proxies behind the scenes, (and similarly, a
different set of proxies for a different site pattern as
I should add one important point. When the error occurs, it is most
often not affecting the entire site nor transaction. This is to say that
I can visit a site, get content, and then at some point fill out a form
on the site, which then generates the 502. I don't want anyone to assume
that the 502
I am doing extended testing of a CentOS v6 TPROXY/SQUID3/WCCP setup and
I noticing higher than usual TCP_MISS/502 codes. I am also seeing some
206 codes, but it is the 502s that are much higher than normal. I think
it is transport related inside the TPROXY/SQUID side of things but I am
not sure.
I
Hello
In to access.log there are many 503 see an example below.
P.S. on my LAN there is another server with squid 2.6 Stable16 and it works
without problem
1311340425.016 63101 10.239.57.89 TCP_MISS/503 4297 GET
http://ad.it.doubleclick.net/adj/hp.libero.it/hp;bgarea=hp;adv_sso1=0;adv_sso2=0
On 23/07/11 01:02, Franco, Battista wrote:
Hello
On Centos 6 and squid 3.1.4 when client surfing on page with flash
player animation they aren't displayed.
I tried to default minimum configuration (see below) + cache_peer but
nothing change.
Can you help me?
You should see a bunch of requests
On 23/07/11 00:50, Will Roberts wrote:
Hi Amos,
On Fri, Jul 22, 2011 at 12:32 AM, Amos Jeffries wrote:
Can you check the contents of the squid.pid file vs the processes that are
actually running between step (6) and (7).
Sure, here are the processes after each step that would cause a change
On 22/07/11 22:30, Amos Jeffries wrote:
On 22/07/11 18:24, tim.schmel...@bechtle.com wrote:
Hi Amos,
thanks for your answer.
Every time we 'fix' this we get complaints from people wanting the
opposite behaviour or suddenly getting breakage. We for now have this
behaviour: Squid should obey Ho
Hello
On Centos 6 and squid 3.1.4 when client surfing on page with flash
player animation they aren't displayed.
I tried to default minimum configuration (see below) + cache_peer but
nothing change.
Can you help me?
-
Squid.conf
#
# Recommended minimum configuration:
#
acl manager proto cac
Chillispot is/was kind of dead last time I checked but the project was
forked/continued by others:
http://coova.org/CoovaChilli/
Regards and good luck,
Eli
2011/7/21 Hasanen AL-Bana :
> Try Chillispot , although it is old.
>
> On Thu, Jul 21, 2011 at 8:26 PM, Mr Crack wrote:
>>
>> Dear Friends,
Hi Amos,
On Fri, Jul 22, 2011 at 12:32 AM, Amos Jeffries wrote:
> Can you check the contents of the squid.pid file vs the processes that are
> actually running between step (6) and (7).
Sure, here are the processes after each step that would cause a change:
Step 3:
1879 ?Ss 0:00 /
Sorry forgot to paste the iostat readings in the below email
avg-cpu: %user %nice %system %iowait %steal %idle
0.700.011.194.640.00 93.47
Device:tps Blk_read/s Blk_wrtn/s Blk_read Blk_wrtn
sda 3.24 120.01 111.886
Dear Markus and Amos,
I have done the changes you have proposed. I have dropped the max-size on COSS
partition to 100KB so the COSS cache_dir line now reads as follows:
cache_dir coss /cache3/coss1 11 max-size=102400 max-stripe-waste=32768
block-size=8192 membufs=100
cache_dir aufs /cache1
On 22/07/11 18:24, tim.schmel...@bechtle.com wrote:
Hi Amos,
thanks for your answer.
Every time we 'fix' this we get complaints from people wanting the
opposite behaviour or suddenly getting breakage. We for now have this
behaviour: Squid should obey Host: port when "vport" is given, and
ignor
19 matches
Mail list logo
