Hi Steve,
I was suggesting September 22nd or 30th. for
a get together. Since then I
had heard Paul was having a steamup on the 22nd also. So
I will plan on the 30th.
Still interested?.
Regards,
Tony D.
At 09:16 AM 9/10/01 -0700, you wrote
>> I have used Trex on my elivated railroad with PETS frames for 4 years
now.
Don,
What thickness Trex do you use?
GaryB
Has anyone used pressure treated 2xs? I've thought of using 2x12s on the
curves and 2x8s on the straights with 2x4s underneath at the joints. I
first thought of using 1x12 and 1x8 pine shelving with a few coats of spar
varnish but the shelving at my local lumber yard is so bowed and twisted
tha
Don,
What dimensional sizes did you use?
Jon
- Original Message -
From: "Don Plasterer" <[EMAIL PROTECTED]>
To: "Multiple recipients of sslivesteam" <[EMAIL PROTECTED]>
Sent: Thursday, September 13, 2001 8:47 AM
Subject: Re: elevated plywood
> I have used Trex on my elivated railroad wi
I have used Trex on my elivated railroad with PETS frames for 4 years now.
The Trex has been outside year round. I live in Northern Ohio with summer
heat reaching the 90's and winter time down to zero and below (brrr). I
have had no proble whatsoever with the track bed. There has been no pro
I've seen them in Home Depot at less than $35 CDN. Considering the value of the
"cargo", that's not bad!
Cheers,
Walt Gray
[EMAIL PROTECTED] wrote:
> In a message dated 9/13/2001 3:01:14 AM Eastern Daylight Time,
> [EMAIL PROTECTED] writes:
>
> > I can't remember who it was, but someone at
In a message dated 9/13/2001 3:01:14 AM Eastern Daylight Time,
[EMAIL PROTECTED] writes:
> I can't remember who it was, but someone at Diamondhead (a few years
ago)
> had an old hard shell suitcase that they had picked up at a garage sale
and had
> modified it inside for such a purpose.
Vance,
You wrote:
-- the safety is completely inaccessible as far as I can tell! This >is not
a good thing, since you can't check your safety when you're >raising steam.
I was alarmed to see that mine finally blew at 70
>psig, though the manual says it's set for 55 psi and that I should >