-
From: Vivek Khera [EMAIL PROTECTED]
To: support@pfsense.com
Sent: Tuesday, May 13, 2008 2:47 AM
Subject: Re: [pfSense Support] setting time
You likely have faulty hardware.
-
To unsubscribe, e-mail: [EMAIL PROTECTED
On May 10, 2008, at 11:16 AM, Dean Larson wrote:
computer kept near perfect time before under different o/s. this
seems real strange.
A long long time ago, in a galaxy far far away, I had a box that ran
100% fine with linux under load. under FreeBSD and BSD/OS it would
lock up
On May 10, 2008, at 4:13 PM, Chris Buechler wrote:
3) ACPI issues - try disabling ACPI, sometimes it causes time
keeping issues.
You can also selectively disable the ACPI timer device without turning
ACPI off entirely. Add the following to your /boot/loader.conf file:
: [EMAIL PROTECTED]
To: support@pfsense.com
Subject: Re: [pfSense Support] setting time
Dean, have you checked the motherboard battery? (I think in theory this
should only be relevant on powering off, but I wouldn't be
sure in practice)
Kind regards
David Hingston
Curtis LaMasters wrote:
What timezone are you in? If CST try Chicago instead of GMT -6.
--
Curtis LaMasters
http://www.curtis-lamasters.com
http://www.builtnetworks.com
Yeah, for those of you who don't know. The GMT settings for FreeBSD and
other OSsen are completely wrong. If you're trying
a event to log
-- and looked at the entry in the look -- ie: pass traffic to a server that
the firewall will not let me do: ie: tcp port 40.
dean
Date: Fri, 9 May 2008 23:46:18 -0500
From: [EMAIL PROTECTED]
To: support@pfsense.com
Subject: Re: [pfSense Support
From: [EMAIL PROTECTED]
To: support@pfsense.com
Subject: Re: [pfSense Support] setting time
What timezone are you in? If CST try Chicago instead of GMT -6.
--
Curtis LaMasters
http://www.curtis-lamasters.com
http://www.builtnetworks.com
.
Date: Sat, 10 May 2008 10:12:32 -0500
From: [EMAIL PROTECTED]
To: support@pfsense.com
Subject: Re: [pfSense Support] setting time
Have you run:
ntpdate pool.ntp.org
from the command line?
Dean Larson wrote:
right now it is running about 10 minutes fast. i set
:32 -0500
From: [EMAIL PROTECTED]
To: support@pfsense.com
Subject: Re: [pfSense Support] setting time
Have you run:
ntpdate pool.ntp.org
from the command line?
Dean Larson wrote:
right now it is running about 10 minutes fast. i set it to
chicago about 30 minutes ago... and time still moves
I have seen some older systems have an issue between the hardware clock
being set to UTC or Localtime and the OS showing a completely different
time. May want to recheck your BIOS Date/Time.
--
Curtis LaMasters
http://www.curtis-lamasters.com
http://www.builtnetworks.com
i'll verify the clock on the hardware to verify they are both on the same page.
:)
Date: Sat, 10 May 2008 11:53:10 -0500
From: [EMAIL PROTECTED]
To: support@pfsense.com
Subject: Re: [pfSense Support] setting time
I have seen some older systems have
Date: Sat, 10 May 2008 11:53:10 -0500
From: [EMAIL PROTECTED]
To: support@pfsense.com
Subject: Re: [pfSense Support] setting time
I have seen some older systems have an issue between the hardware clock being
set to UTC or Localtime and the OS showing a completely
On Sat, May 10, 2008 at 11:16 AM, Dean Larson [EMAIL PROTECTED] wrote:
i have a cron job of 15 * * * * /usr/sbin/ntpdate -u -s tick.usno.navy.mil
i did the command you said ntpdate pool.ntp.org. and yes it sets the time,
but it doesn't stay. for long.
computer kept near perfect time
Subject: Re: [pfSense Support] setting time
On Sat, May 10, 2008 at 11:16 AM, Dean Larson wrote:
i have a cron job of 15 * * * * /usr/sbin/ntpdate -u -s tick.usno.navy.mil
i did the command you said ntpdate pool.ntp.org. and yes it sets the time,
but it doesn't stay. for long.
computer
.
thank you for all your help.
dean
Date: Sat, 10 May 2008 16:13:11 -0400
From: [EMAIL PROTECTED]
To: support@pfsense.com
Subject: Re: [pfSense Support] setting time
On Sat, May 10, 2008 at 11:16 AM, Dean Larson wrote:
i have a cron job of 15 * * * * /usr/sbin/ntpdate -u -s
@pfsense.com
Date: Sat, 10 May 2008 19:55:03 -0700
Subject: Re: [pfSense Support] setting time
Hi Dean,
You can see what FreeBSD (pfSense) is using to keep time with the
following command:
firewall:~# sysctl kern.timecounter.hardware
kern.timecounter.hardware: TSC
You can see what
Dean, have you checked the motherboard battery? (I think in theory this should
only be relevant on powering off, but I wouldn't be
sure in practice)
Kind regards
David Hingston
-
To unsubscribe, e-mail: [EMAIL PROTECTED]
On Sun, May 11, 2008 at 12:19 AM, Dean Larson [EMAIL PROTECTED] wrote:
i did ysctl -w kern.timecounter.hardware=i8254 and after 33 minutes i was off
.04 seconds. better than 250 seconds.:)
Good to know! Thanks for reporting back.
how do you set the time on pfsense? i have checked the openntpd and still the
time is wrong. i have written a cron job to set the clock and it doesn't
appear to change the clock. it seems to gain time about 15 minutes in 12 hours.
what am i doing wrong? how can i fix this?
thank you
dean
What timezone are you in? If CST try Chicago instead of GMT -6.
--
Curtis LaMasters
http://www.curtis-lamasters.com
http://www.builtnetworks.com
20 matches
Mail list logo