Back in the days (around 1985 or so) Caltech in Pasadena used to have a
surplus store on campus. I spent a good time in that store, and still have
some of those treasures. Lot's of JPL stuff.
Does anyone know if that still exists??
bye,
Said
In a message dated 3/31/2010 21:23:59 Pacific
Rex wrote:
jimlux wrote:
Scott Burris wrote:
C&H closed briefly to move and is now open in Duarte:
http://www.candhsurplus.com/
At Apex, a friend tried to purchase a nose cone from a rocket, but
they declined
to sell it to him because they were making too much money renting it
out to movie
Well, there are more reasons for astounding prices. For example, Ebay was
a good place to get stuff, until it changed from a marketplace to a
virtual storefront. A bunch of buy it now's does not establish a
marketplace where prices can be determined. So the BIN's have prices that
seem outrageous.
P
Wow, kind of a cross between the old Halted and Alan Steel in Redwood City. I
know where to go if I need doorknobs!
Dave
- Original Message -
From: "Burt I. Weiner"
To: time-nuts@febo.com
Sent: Wednesday, March 31, 2010 1:24:47 PM GMT -07:00 US/Canada Mountain
Subject: [time-nu
jimlux wrote:
Scott Burris wrote:
C&H closed briefly to move and is now open in Duarte:
http://www.candhsurplus.com/
At Apex, a friend tried to purchase a nose cone from a rocket, but
they declined
to sell it to him because they were making too much money renting it
out to movie studios.
S
Scott Burris wrote:
C&H closed briefly to move and is now open in Duarte:
http://www.candhsurplus.com/
At Apex, a friend tried to purchase a nose cone from a rocket, but they declined
to sell it to him because they were making too much money renting it out to
movie studios.
Scott
That is
Fellow time-nuts,
The US Air Force is now more openly discussing the issues and means to
mitigate them relating to SVN-49. It has provided an interesting
exercise as not all the means available to mitigate that just reading
ICD-GPS-200 may be applicable. They are discussing a number of differe
Or wireless computer and computerless wire (seen on a birthday card).
Bill
-Original Message-
Don Latham
Sent: Wednesday, March 31, 2010 3:48 PM
Goes to showya---word order can be important, core memory and memory
core...hehe
Don
___
time-nu
Wow!! Thanks,
-John
> C&H closed briefly to move and is now open in Duarte:
>
> http://www.candhsurplus.com/
>
> At Apex, a friend tried to purchase a nose cone from a rocket, but they
> declined
> to sell it to him because they were making too much money renting it out
> to movi
C&H closed briefly to move and is now open in Duarte:
http://www.candhsurplus.com/
At Apex, a friend tried to purchase a nose cone from a rocket, but they declined
to sell it to him because they were making too much money renting it out to
movie studios.
Scott
On Mar 31, 2010, at 1:02 PM, J. F
Goes to showya---word order can be important, core memory and memory
core...hehe
Don
J. Forster
> This I can't resist!
>
> In about 1963, I was at Eli Heffron's in Cambridge. The old man, Eli was
> still alive. Anyway, they had won a big lot for many kilobucks from IBM
> near NYC. I was there when
This I can't resist!
In about 1963, I was at Eli Heffron's in Cambridge. The old man, Eli was
still alive. Anyway, they had won a big lot for many kilobucks from IBM
near NYC. I was there when they unloaded.
They were all hot about the money they were going to make form all the
"memory cores" the
Apex was in Sun Valley. They were there in 1979 and had lots of aerospace
telemetry stuff there. I bought an Omega receiver and carried it to Boston
as baggage. Those were the days.
Sadly C&H is now gone. I don't know if Palley Supply is still in business.
There was also Industrial Liquidators at
Dayton Hamvention, May 14-16.
Always lots of surplus equipment dealers in flea market. Good opportunity to
haggle over price, see what you are buying in person, and see a lot of other
junque as well.
www.hamvention.org
Regards,
Tom Holmes, N8ZM
Tipp City, OH
EM79xx
-Original Message-
F
Message: 4
Date: Wed, 31 Mar 2010 08:28:09 -0700 (PDT)
From: "J. Forster"
Subject: Re: [time-nuts] OT Question - Surplus Places
To: les...@veenstras.com, "Discussion of precise time and frequency
measurement"
Message-ID: <49609.12.6.201.2.1270049289.squir...@popaccts.quik.com>
Content-Type: te
I uploaded the 10514 and 10534 mixer manuals to ko4bb site
Bruce Griffiths wrote:
Upload it to the manuals section of Didier's site:
http://www.ko4bb.com/cgi-bin/manuals.pl
Bruce
___
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go t
Recently seen at Apex : NOS Ampex Ferrotech Memory cores 45k in a vial ,
$2 .
Ask for Don.
Steve
--- On Wed, 3/31/10, Burt I. Weiner wrote:
From: Burt I. Weiner
Subject: [time-nuts] Surplus Places...
To: t
I spotted this place a couple years ago. Noted it but have not been back to
LA with time to get to the place. It indeed looks like a great place for the
things I tend to be interested in.
Though good to here the $ may be more reasonable. In Santa Clara some of the
places want gold for true junk.
O
In the Southern, California - Los Angeles area, we have a place
called Apex Electronics. Some of the prices in the past have been
outrageous, but now seem to becoming more reasonable. Right now
there seems to be a ton of NTSC TV stuffs coming in the doors. I
think you could spend days foragi
Ignacio
I do not know. But those ovens actually started me in the world of frequency
references.
I found one at a computerfest many years ago 1992 for 50 cents.
I discovered they were used in the HP5360 (I now have 4 of those working)and
HP5248m as I recall. I think they were used in other equipmen
Upload it to the manuals section of Didier's site:
http://www.ko4bb.com/cgi-bin/manuals.pl
Bruce
Brian Kirby wrote:
The manual is about a megabyte - the list will not accept it.
ewkeh...@aol.com wrote:
Is there a way you can post it on time-nuts?
Thank you Bert Kehren
In a message dated 3/3
Hello,
I have seen one of those oscillators on the usual site. I own one
00105-6013 and I know the range of frequency standards which used one.
Externally both look identical but, anybody know the differences and the
equipments that used them? Just a matter of curiosity.
Regards,
Ignacio, EB4AP
And I had completely forgotten about Meshnas. Spent much more time there,
and one company in the same area that morphed into electronic music
instruments.
Lester B Veenstra MØYCM K1YCM
les...@veenstras.com
m0...@veenstras.com
k1...@veenstras.com
US Postal Address:
PSC 45 Box 781
APO AE 0946
Brother Ben ran the surplus store
Brother Jay ran Solid State Sales, the IC operation in the basement.
-John
> That's the placeUsed to buy "RTL" logic there
>
>
>
> Lester B Veenstra MØYCM K1YCM
> les...@veenstras.com
> m0...@veenstras.com
> k1...@veenstras.com
>
>
> US
That's the placeUsed to buy "RTL" logic there
Lester B Veenstra MØYCM K1YCM
les...@veenstras.com
m0...@veenstras.com
k1...@veenstras.com
US Postal Address:
PSC 45 Box 781
APO AE 09468 USA
UK Postal Address:
Dawn Cottage
Norwood, Harrogate
HG3 1SD, UK
Telephones:
Office: +44-(0)1423
Would you mind sending it direct to me at _ewkeh...@aol.com_
(mailto:ewkeh...@aol.com) as an attachment? You know we are in the test phase
of a Dual
Mixer and we are also running tests with the 10514 A and B along with the
SYPD-1. The next board will accept the footprint of the 10514 B. B
There is also Young Engineering in Salem, Mass. <
http://www.youngengsales.com/>
They used to have more electronics stuff, but they seem to have become a
used machine tool dealer. Well, the electronics stuff may be too numerous
and cheap to be worth listing on the website.
time-nuts-boun...@f
> Never heard of elis and I have been out here 12 years.
> NH had some places and as mentioned a few exist. I used to visit some just
> across the ma/nh boarder. But most of what I have seen has been the very
> very bottom of the barrel.
> Oh for the flea market days when trucks of test equipment s
They went into the DEC and PC business years ago and I've not been there
in 30 years. I've heard the brothers, Ben and Jay are both long dead.
Meshna is also long gone.
BnF is still around but selling mostly PC related stuff. Peter Boniface
comes to most of the MIT Fleas.
There are a couple of
Going to Talladega? I am in Anniston, just a hop, skip away. If you get
time, drop by. I am at 1750 Coleman Rd. We don't have a Time Nuts quality
lab here but do have some interesting stuff.
John Green
___
time-nuts mailing list -- time-nuts@febo.com
To u
The manual is about a megabyte - the list will not accept it.
ewkeh...@aol.com wrote:
Is there a way you can post it on time-nuts?
Thank you
Bert Kehren
In a message dated 3/30/2010 9:10:19 P.M. Eastern Daylight Time,
kilodelta4foxm...@gmail.com writes:
We'll the "A"s are the package w
I'm in Birmingham and even the thrift stores here list their stuff on ebay,
could give you a list of closed places, was one in Decatur ...
You can find places using ebay and see if they will let you come by for a look,
no joy for time-nuts stuff but for other stuff this has worked for me.
UAB
Lester Veenstra-"I guess this means Eli's is gone !"
I used to go to Eli Heffron & Sons when Eli ran it and also
after the two sons took over the business. There was always
something of interest to be found. I never knew I 'needed' an
item until I saw it at the bottom of a pile of other treasur
Never heard of elis and I have been out here 12 years.
NH had some places and as mentioned a few exist. I used to visit some just
across the ma/nh boarder. But most of what I have seen has been the very
very bottom of the barrel.
Oh for the flea market days when trucks of test equipment showed up a
Dave
If you don't mind building it yourself and customising some PIC code try
this
_http://www.g4jnt.com/GPLOCDIS.ZIP_ (http://www.g4jnt.com/GPLOCDIS.ZIP)
I used a different GPS unit and found a minor bug in the code because of
that but if you go down this route I can let you have the up
b...@lysator.liu.se wrote:
Zealand is an island between Denmark and Sweden.
Was not aware of that. Lat/Lon?
Zeeland is a province of the Netherlands
Been there...
Bruce
--
Björn
The name New Zealand originates from the latter via Dutch Cartographers.
Is there a way you can post it on time-nuts?
Thank you
Bert Kehren
In a message dated 3/30/2010 9:10:19 P.M. Eastern Daylight Time,
kilodelta4foxm...@gmail.com writes:
We'll the "A"s are the package with the BNC connector.
The "B"s are for OEM equipment, they had 6 pins and a smaller pla
b...@lysator.liu.se wrote:
Hi Sanjeev,
On Wed, Mar 31, 2010 at 13:51, wrote:
Zealand is an island between Denmark and Sweden.
Was not aware of that. Lat/Lon?
55.5N 11.75E
Ahaa... Zealand is the English name for Sjaelland. Well, Sjaelland _is_
Denmark. Try te
G'Day Dave,
Would one of these do the job?
http://www.siliconchip.com.au/cms/A_111363/article.html
http://www.siliconchip.com.au/cms/A_111709/article.html
___
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to https://www.febo.com/cgi-
39 matches
Mail list logo
