Hi All, Resending this mail for peoples attention.regards,Avinash-- Forwarded message --From: Avinash Sridharan <
[EMAIL PROTECTED]>Date: Aug 7, 2006 10:55 AMSubject: problems with using block storage at high data rate in tinyos-2.x beta2To: tos
huh...it _should_ work.
I do the enableAck in the init() phase, even though JoeP warned
me that it should be in start(). My version is in my code bolus at:
http://www.etantdonnes.com/Motes/robocode.tar.gz
But it also contains TOSBase mods to pass the radio ACK back to the
host over the serial lin
Yes I am sending to unicast address 0 which is the sink node. and it is not working.I found one other strange thing. I programmed another mote with TOSBase without enabling ack. The Oscilloscope mote is able to send the packet as the normal TOSBase is able to receive it. But TOSBase with ack is n
Hi Michael,
Yes, I did a make in that directory, and then I can build successfully, but
when I do rpm installation again, I get such error again because rpm
installation deletes these files first before running the build process.
Thanks!
Yicheng
-Original Message-
From: Michael Schipplin
Can you do a make in the offending directories, or trees?
That might generate the files you need.
MS
yicheng wrote:
Hi Folks,
I’m trying to install rpm package
“tinyos-1.1.15Dec2005cvs-1.cygwin.noarch.rpm” on my WindowsXP, when I
run “rpm --force --ignoreos -Uvh
tinyos-1.1.15Dec2005cvs-1
I (you) would have to go look at the definition of the LogMsg to
be sure, but it looks like a string of two byte sensor readings
in Low Byte (little-endian) order. The first 0xd4 may be a sequence
number or something but the rest, 0x96 0x00, 0x92 0x00, etc are
probably readings like 0x0096, 0x0092
Looks like you are using the "basicsb" sensorboard...or at least
the compile time definitions for such. That board doesn't have
a sound emitterIf you have cobbled a sensor board with a sound
device you can try copying tos/sensorboards/micasb/Sounder* to basicsb.
MS
jurin dan wrote:
In short,make mica2compiles the program into an executablemake mica2 install compiles the program and loads it onto the mote (ull have to edit the MakeRules file in /apps to tell the installer what port to use etc
make mica2 reinstallsimply loads an existing executable onto the moteOn 8/9/06, Zane
Hi Folks,
I’m trying to install rpm package “tinyos-1.1.15Dec2005cvs-1.cygwin.noarch.rpm”
on my WindowsXP, when I run “rpm --force --ignoreos -Uvh
tinyos-1.1.15Dec2005cvs-1.cygwin.noarch.rpm”, I get plenty of errors like these:
C:\PROGRA~1\UCB\cygwin\opt\tinyos-1.x\tools\java\net\ti
Hi,
Has anyone successfully installed TinyDT on eclipse 3.1.2 under Linux?
Or any version of eclipse? I've followed the directions and unzipped
the files to /usr/share/eclipse/plugins but I'm not finding a tinyOS
or tinyDT perspective. Is this the case in Windows as well?
Justin Dugger
if i want to burn sample programs given in tinyos (like BLINK
etc)... i have builded it using make command. i have got it for
all the platforms. i have one srec file and an exe file...
could anyone now get me how to burn the code into MICA2. is there
any IDE for that.??
Hey guys,I just have a - maybe curious - question:Is it possible to run TinyOS on a smartcard? My smartcard has an ATmega163 processor. I would like to have further information (if there is any). Thanxs a lot!
CheersSoeren
___
Tinyos-help mailing list
Tin
hi
did anybody know when dealing with senselighttolog apps how to convert
the data get with the command read_log in to comprehensive data to human
being?
i.e read_log command print this to the screen :
$ java net.tinyos.tools.BcastInject read_log 1
Sending payload: ae 6 0 0 0 1 0 0 0
hi,
recently i have done successfully the exercice in the lesson 7 of
tinyos tutorial. the exercice consist of adding the command tog_sounder to
the existing command of SimpleCmd apps.
i can compile and load the modified SimpleCmd on mica2 and all test
run well.
hello everybody
if i want to burn sample programs given in tinyos (like BLINK etc)... i have builded it using make command. i have got it for all the platforms. i have one srec file and an exe file... could anyone now get me how to burn the code into MICA2. is there any IDE
Hi everyone,
I'm trying to use Timer1 as a timer for my manchester encoder on my node
which is based on the mica2. I am using HPLTimer1M.nc from the micaz and
have modified it slightly for my application. Basically, the timer acts
as a the clock for the SPI which outputs the manchester encoded
Hi,Make sure that you change the destination address from TOS_BCAST_ADDR to some specific address. ACK works with a unicast message.-KrisakornOn 8/9/06,
Ravi Prasad <[EMAIL PROTECTED]> wrote:
Hi all,I am trying to use ACK at MAC layer in micaz with Tinyos1.1.15. I went through the mail archive to
The other cases where u would like to control the power management by yourself depends on what event you want to wakeup the mote. For example if you use HPLPowerManagement then the mote (I tested this on micaz motes) can wakeup on Timer event but not on a UART receive event. So if your application
18 matches
Mail list logo