Re: Topband: I identified signal on 1.825 MHz this morning

2020-12-11 Thread Don Kirk
Correction, it stopped at 7:54 EST. 73, Don (wd8dsb) On Fri, Dec 11, 2020 at 8:00 AM Don Kirk wrote: > Hi Topband Gang, > > Thanks to everyone that reported reception of the signal. It stopped at > 7:54am EDT. Based on preliminary data which probably did not have enough > resolution it

Re: Topband: I identified signal on 1.825 MHz this morning

2020-12-11 Thread Don Kirk
Hi Topband Gang, Thanks to everyone that reported reception of the signal. It stopped at 7:54am EDT. Based on preliminary data which probably did not have enough resolution it looked like it was originating from Ohio or Pennsylvania. Hopefully it does not reappear. 73, Don (wd8dsb) On Fri,

Re: Topband: I identified signal on 1.825 MHz this morning

2020-12-11 Thread Bill Stewart
Hearing it in NC on an Inverted L...peaking S4-5 with noise floor at abt an S1. Now sending a pulsing xmsn...1235Z(7:35 EST). 73 de Bill K4JYS - Original Message - From: "Don Kirk" To: "topband" Sent: Friday, December 11, 2020 7:06:40 AM Subject: Topband: I identi

Re: Topband: I identified signal on 1.825 MHz this morning

2020-12-11 Thread Jon Zaimes via Topband
://www.eham.net/reviews/detail/12922 Hug your favorite tower every day, and always stay connected to it. -Original Message- From: Topband On Behalf Of Don Kirk Sent: Friday, December 11, 2020 7:07 AM To: topband Subject: Topband: I identified signal on 1.825 MHz this morning I’m hearing a very

Re: Topband: I identified signal on 1.825 MHz this morning

2020-12-11 Thread Don Kirk
Hi Dave, Thanks and glad others are hearing it too. I just looked at it on an SDR receiver and it has a bandwidth of 400 Hz, and it's using two different frequencies spaced 200 Hz apart. Very Strong here near Indianapolis. Peaking 25 dB over my noise floor. Just FYI, Don (wd8dsb) On Fri, Dec

Re: Topband: I identified signal on 1.825 MHz this morning

2020-12-11 Thread John Kaufmann via Topband
@contesting.com; Topband Subject: Re: Topband: I identified signal on 1.825 MHz this morning Signal is ~45 degrees from EM45 Arkansas. running about 15 dB above my noise floor. 73 Joel W5ZN On 2020-12-11 05:15, David Raymond wrote: > Signal bearing from central Iowa/EN21 is about 70 degrees ba

Re: Topband: I identified signal on 1.825 MHz this morning

2020-12-11 Thread w5zn
Signal is ~45 degrees from EM45 Arkansas. running about 15 dB above my noise floor. 73 Joel W5ZN On 2020-12-11 05:15, David Raymond wrote: Signal bearing from central Iowa/EN21 is about 70 degrees based on some interpolation from the 8 circle array. On 12/11/2020 6:06 AM, Don Kirk wrote: I’m

Re: Topband: I identified signal on 1.825 MHz this morning

2020-12-11 Thread David Raymond
Signal bearing from central Iowa/EN21 is about 70 degrees based on some interpolation from the 8 circle array. On 12/11/2020 6:06 AM, Don Kirk wrote: I’m hearing a very strong pulsating signal that sounds like it might be some kind of digital communications and it’s bearing is approximately 73

Topband: I identified signal on 1.825 MHz this morning

2020-12-11 Thread Don Kirk
I’m hearing a very strong pulsating signal that sounds like it might be some kind of digital communications and it’s bearing is approximately 73 degrees from my QTH near Indianapolis and wonder if others are hearing it at at what heading and does anyone recognize what it is? It’s on right now at