I have a pair of 900 ft parallel beverages to the NE. The feed point of the
beverages is approximately 350 ft from the closest of the 2 T verticals.
The T verticals pattern is directly towards the beverage array since both
point NE. Obviously the beverages go away from the array to the NE.
I
On 12/18/2015 1:15 PM, Petr Ourednik wrote:
Hi
it sounds like SO2R on the same band... Its interresting for me too. I
am using one solution in CQ160m in order to use 2nd radio for S&P but
its disconnected from antenna and grounded as same as 1st radio in RUN
during TX period. So I am curious w
Hi
it sounds like SO2R on the same band... Its interresting for me too. I
am using one solution in CQ160m in order to use 2nd radio for S&P but
its disconnected from antenna and grounded as same as 1st radio in RUN
during TX period. So I am curious what other TBers are using...
73 - Petr, OK1RP
Hi I was thinking about using a 3dB splitter and tuning the band with our
second K3 using our HiZ monoband 8 circle while we were calling CQ in the Stew.
The center of the array is located 105 meters from the xmit vertical, uses 20'
elements, the included preamp and 100m of RG6 transmission line
