Hi,
I have an issue understanding BIND keyword
I understand it creates a new variable (name, value) pair / binding within
a {} scope
However, the spec also says it breaks the graph pattern scope {} into 2 {}s
but does not clarify what that means (especially when the previous {} does
not bring
Hi,
I have a swp like this:
ui:group let:zgecko={= xsd:String(elh-fun:getASiblingOverlappingHireId(
?lastHireId, ?etd)) }
..
ui:if..
..
ui:elseif ui:condition={=
smf:isBound(?zgecko) }
, 12:33 AM, Nicolae Marasoiu wrote:
Hi,
Editing ui:errorPrototype, I remove a piece of code. I refreshed, the
same. Restarted, the same. Reimported fully the project after stopping TBC,
removing workspace, the same.
Where can this state be? I triple checked the file content and the piece
Hi,
Editing ui:errorPrototype, I remove a piece of code. I refreshed, the same.
Restarted, the same. Reimported fully the project after stopping TBC,
removing workspace, the same.
Where can this state be? I triple checked the file content and the piece of
code is no longer there.
I have been
?
These are the kinds of questions Nick was alluding to that may help us
narrow down possible causes and either verify a defect or find an
effective
workaround.
TIA
-- Scott
On Jul 11, 2014, at 5:11 PM, Nicolae Marasoiu nicolae@gmail.com
javascript: wrote:
Hi,
We receive the stack trace below
(8080) -Dhttp.nonProxyHosts=hosts that
should not be accessed through the proxy $JAVA_OPTS
Thanks,
Daniel
On Tuesday, July 15, 2014 8:57:32 AM UTC+2, Nicolae Marasoiu wrote:
Hi,
Proxy setup as jvm parameters to tomcat as mentioned.
Since the last restart 2 days ago PostRequest
-client-and-http-proxies/
Thanks
On Tuesday, July 15, 2014 2:49:16 PM UTC+3, Nicolae Marasoiu wrote:
Hi all,
So I just to reiterate:
- the only environment where we have the issue (the one proxied with jvm
params to tomcat as per Daniel's details)
- the issue is consistent: Sml:PostRequest
and either verify a defect or find an effective
workaround.
TIA
-- Scott
On Jul 11, 2014, at 5:11 PM, Nicolae Marasoiu nicolae.maras...@gmail.com
wrote:
Hi,
We receive the stack trace below from the container we are using (Tomcat
running TopBraid semantic software TBL). However a similar
Hi,
We had 2 instances where a web service over http using basic auth reported
Authentication failed, but with Connection refused as the stack cause
(ConnectException).
Restarting TBC solved it. With TBL we did not restart yet.
However, Connection refused is supposed to be a response from the
On Fri, Jul 11, 2014 at 9:55 AM, Nicolae Marasoiu
nicolae.maras...@gmail.com wrote:
Hi,
We had 2 instances where a web service over http using basic auth
reported Authentication failed, but with Connection refused as the
stack cause (ConnectException).
Restarting TBC solved it. With TBL we
Hi,
We have some SWP code which works as intended on Linux (the dev used 4.4.1
on ubuntu).
But when TBC 4.4.1 on windows is refreshed, restarted, resources (top spin,
swp, sparql motion) reloaded, etc, it does not work.
I find it very hard to say exactly what does not work.
Thanks,
Nicu
--
Hi,
I have a module of type sml:ConvertTextToRDF with sm:XML serialization type,
The payload to parse / deserialize into RDF / sparql restult set is:
?xml version=1.0?
sparql xmlns=http://www.w3.org/2005/sparql-results#;
head
variable name=returnStatus/
variable name=resourceId/
The XML payload was generated using sml:SerializeSPARQLResults.
The same error occurs when i bind ?error correctly (as a sparql expression,
as input to the function generating rdf with sparql and the serializing)
On Wednesday, May 28, 2014 10:11:36 AM UTC+3, Nicolae Marasoiu wrote:
Hi,
I
with the
xsd:type appended, e.g. 2014-05-27T14:06:11+0300^^xsd:dateTime.
In your case the result seems to be
'2014-05-27T14:06:11+0300'^^xsd:dateTime - not the extra quote that makes
it illegal syntax for xsd:dateTime.
-- Scott
On 5/27/2014, 6:10 AM, Nicolae Marasoiu wrote:
Hi
as Z (the
timezone part) instead of the +03:00 wanted by xsd.
Please see details in my previous message below/above.
Thanks
Nicu
On Wednesday, May 28, 2014 1:15:19 PM UTC+3, Nicolae Marasoiu wrote:
Hi,
The cause is that the timezone as represented by java Z format is +0300
not +03:00.
Can
Hi,
I access an HTTP endpoint with Basic Authentication using sml:PostRequest.
It would be natural for the error message to accurately indicate the cause
of miscommunication such as:
- connection refused (typically the peer OS got the TCP CONNECT but no
service is listening on that port)
-
Hi,
I have a FilterByConstruct with:
CONSTRUCT {
?s ?p ?o .
}
WHERE {
?s ?p ?o .
}
My understanding was that it would filter all the matching triplets: all,
in this case.
However I see the incoming graph as unfiltered after the module has passed
the filter.
Please advice,
Nicu
--
Ok, it does filter sorry!
I was confused that i saw subgraphs in debug under the TreadSafeGraph, i
just that they are just some kind of history?
On Wednesday, May 28, 2014 4:26:49 PM UTC+3, Nicolae Marasoiu wrote:
Hi,
I have a FilterByConstruct with:
CONSTRUCT {
?s ?p ?o .
}
WHERE
, 2014 6:06:28 PM UTC+3, Nicolae Marasoiu wrote:
Hi,
I use sml:PostRequest and have a resulting xsd:string value, holding an
XML data string payload.
The next step would be to convert it to RDF.
But sml:ConvertXMLToRDF takes an rdf:XmlLiteral value.
How to convert between the 2 types
, 2014 11:22:58 AM UTC+3, Nicolae Marasoiu wrote:
Hi Scott,
No, unfortunately this happens to me and an experienced colleague who just
worked around it with xpath to avoid the impossible conversion.
So I have an xsd:string stored in a ?xmlStringResult output variable from
the PostRequest.
I
Hi,
I am trying to generate the currend xsd:dateTime to insert in a dynamic XML
payload with:
spif:dateFormat(now(), -MM-dd)) + T + spif:dateFormat(now(),
HH:mm:ssZ)
Sending out content yields XSD validation exception, probably from the
remoint endpoint XSD validation:
Reason:
Hi,
I have a sml:SerializeSparqlResults in an external code and i need to
deserialize it back to RDF in another part of the system.
How can I do this?
thanks
Nicu
--
-- You received this message because you are subscribed to the Google
Group TopBraid Suite Users, the topics of which include
Hi,
Found, convert text in one of the serializations formats back to RDF
function.
Thanks
On Tuesday, May 27, 2014 4:12:07 PM UTC+3, Nicolae Marasoiu wrote:
Hi,
I have a sml:SerializeSparqlResults in an external code and i need to
deserialize it back to RDF in another part of the system
Hi,
ReturnRDF has a sml:serialization argument, which suggests me that the RDF
triple set need to be serialized in order to be used in the calling
function.
Can RDF results be shared as values without being serialized?
Thanks,
Nicu
--
-- You received this message because you are subscribed
Hi,
Just cloned some modules, and i checked that in the BranchByAsk I only have
if and else, no next.
However nodes on both if and else branches are hit.
This really looks like a bug, can you advice?
Thanks
Nicu
--
-- You received this message because you are subscribed to the Google
Group
Composer-ME, and under Reference open
the SPARQLMotion Module Library Reference section.
-- Scott
On 5/22/2014, 6:33 AM, Nicolae Marasoiu wrote:
Hi,
I need to use a SOAP integration from a SparqlMotion function.
Can you please suggest how to do it?
I heard about an ImportXMLFromURL
Hi,
It worked, with subclassing, Thanks!
On Thursday, May 22, 2014 2:33:10 PM UTC+3, Nicolae Marasoiu wrote:
Hi,
I need to use a SOAP integration from a SparqlMotion function.
Can you please suggest how to do it?
I heard about an ImportXMLFromURL, is this one way?
Where can I find
Hi,
I use sml:PostRequest and have a resulting xsd:string value, holding an XML
data string payload.
The next step would be to convert it to RDF.
But sml:ConvertXMLToRDF takes an rdf:XmlLiteral value.
How to convert between the 2 types?
Thanks,
Nicu
--
-- You received this message because
Hi,
I need to use a SOAP integration from a SparqlMotion function.
Can you please suggest how to do it?
I heard about an ImportXMLFromURL, is this one way?
Where can I find details about them, code snippets, documentation and
philosophy underneath?
Is it possible to make it work in Java and
Hi!
I receive the following error in TBC 4.4.0 when:
1. Refreshing Top Braid registries, scripts
2. When executing certain scripts
Do you have any hints of the reason and solution?
Thanks
Nicu Marasiou
eclipse.buildId=unknown
java.version=1.7.0_51
java.vendor=Oracle Corporation
BootLoader
longer
stack traces. Be sure to reset that setting after capturing the
exception, as it will have an impact on performance.
-- Scott
On 4/17/2014, 3:40 AM, Nicolae Marasoiu wrote:
Hi,
Steps: Open a sms.ttl. Scripts/Create new SM function/Add(argument) -
select elhfnc:orgId (used
Hi,
I try to create a new function with TBC 4.4.
Scenario:
Open Scripts/ create function/web service.
On adding an argument, I select an URI/IRI to an existing Property type
resource with range xsd:string, already used in other functions.
Click Ok in add-arg popup.
Result:
First attempt,
32 matches
Mail list logo