On 13.9.2018 06:02, Luis Araneda wrote:
> Only add CONFIG_DISPLAY to defconfig because CONFIG_I2C_EDID
> is automatically selected by CONFIG_DISPLAY
>
> Signed-off-by: Luis Araneda
> ---
> configs/zynq_zybo_defconfig | 1 +
> include/configs/zynq_zybo.h | 2 --
> 2 files changed, 1 insertion(+),
The Clearfog SOM can optionally have eMMC installed. Enable support for
eMMC boot partitions by default.
Signed-off-by: Baruch Siach
---
include/configs/clearfog.h | 4
1 file changed, 4 insertions(+)
diff --git a/include/configs/clearfog.h b/include/configs/clearfog.h
index 7d56dfd86e96..
Hi Simon,
On Wed, 12 Sep 2018 at 17:25, Simon Shields wrote:
>
> Hi,
>
> This patch series adds support for using U-Boot's SPL as the second
> stage bootloader ("BL2") on Exynos4412 SoCs.
>
> - Patch #1 adds support for the EMMC/SD OM pin configuration, which is used
> by the boards I tested on
Hi,
On Wed, 5 Sep 2018 10:12:19 +0800 Peng Fan wrote:
> Add i.MX8QXP MEK board support
> Enabled pinctrl/clk/power domain/mmc/i2c driver.
> Added README file.
>
> Signed-off-by: Peng Fan
> Cc: Stefano Babic
> Cc: Fabio Estevam
> Cc: Anatolij Gustschin
> ---
> arch/arm/dts/Makefile
Hi,
On Wed, 5 Sep 2018 10:12:11 +0800 Peng Fan wrote:
> Add the power domain DM driver for i.MX8, that it depends on the DTB
> power domain trees to generate the power domain provider devices. Users
> needs add power domain trees with property "compatible = "nxp,imx8-pd";"
>
> When power on one
The FAT driver supports unaligned reads and writes and EFI applications
will make use of these. So a misaligned buffer is only worth a debug
message.
Signed-off-by: Heinrich Schuchardt
---
fs/fat/fat.c | 2 +-
fs/fat/fat_write.c | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
dif
On Mon, Aug 27, 2018 at 4:47 AM Priyanka Jain wrote:
>
> NXP SoCs like LX2160A can support new ethernet modes
> which are 25G_AUI(25G), XLAUI(40G), CAUI2(50G)
> and CAUI4(100G)
> Add corresponding macros definitions in phy_interface.h
>
> Signed-off-by: Priyanka Jain
Acked-by: Joe Hershberger
_
The UEFI spec requires that attributes are only set for when
EFI_FILE_MODE_CREATE is set in open_mode.
The SCT tries to read a directory with EFI_FILE_DIRECTORY.
As EDK2 allows this we should not be more strict.
Signed-off-by: Heinrich Schuchardt
---
lib/efi_loader/efi_file.c | 11 ++-
From: Fabio Estevam
Instead of keeping a custom environment, use a more generic approach
by switching to disto config.
Signed-off-by: Fabio Estevam
Signed-off-by: Otavio Salvador
---
Changes in v3: None
Changes in v2: None
configs/pico-imx6ul_defconfig | 2 +
include/configs/pico-imx6ul.h
From: Fabio Estevam
There are two versions of imx6ul pico SOMs: one with 256MB and another
one with 512MB of RAM.
Convert to SPL so that both versions can be supported. This patch
doesn't rework the clock initialization to avoid changing the behavior
in this same patch, so it will be cleaned up
From: Fabio Estevam
fastboot tool is a convenient way to flash the eMMC, so
add support for it.
Examples of usages:
On the pico-imx6ul U-Boot prompt:
=> fastboot 0
On the Linux PC connected via USB:
1. Retrieving the U-Boot version
$ sudo fastboot getvar bootloader-version -i 0x0525
bootloa
From: Fabio Estevam
Currently only the module with 256MB of RAM is supported.
Add support for the 512MB of RAM variant as well.
Signed-off-by: Fabio Estevam
Signed-off-by: Fabio Berton
Signed-off-by: Otavio Salvador
---
Changes in v3: None
Changes in v2: None
board/technexion/pico-imx6ul/
From: Fabio Estevam
The 'bmode' command is helpful for switching the boot media.
In the case of pico-imx6ul there are two possible boot media:
eMMC or USB.
To boot from eMMC:
=> bmode emmc
To boot from USB (via Serial Download Protocol):
=> bmode usb
Signed-off-by: Fabio Estevam
Signed-off
From: Fabio Estevam
Update the README file to take into accound the switch to SPL.
Signed-off-by: Fabio Estevam
Signed-off-by: Fabio Berton
Signed-off-by: Otavio Salvador
---
Changes in v3: None
Changes in v2: None
board/technexion/pico-imx6ul/README | 26 --
1 file
The new config skips the boot menu which asks which board is in
use. This is useful to allow direct booting of image without user
iteration.
Signed-off-by: Otavio Salvador
---
Changes in v3: None
Changes in v2: None
board/technexion/pico-imx6ul/MAINTAINERS | 5 +++
configs/pico-hobbit-imx6ul_
Currently the baseboards do not offer a way to autodetect which one is
in use, so we ask the user if no value has been set.
Signed-off-by: Otavio Salvador
---
Changes in v3: None
Changes in v2: None
configs/pico-imx6ul_defconfig | 5 +++--
include/configs/pico-imx6ul.h | 10 ++
2 file
This rework the DFU settings so it supports the SPL and U-Boot image,
as well as the single partition layout we are using by default.
Signed-off-by: Otavio Salvador
---
Changes in v3: None
Changes in v2: None
include/configs/pico-imx6ul.h | 11 ++-
1 file changed, 6 insertions(+), 5 de
Falcon mode boots the kernel directly from SPL, without loading
the full U-Boot.
As pico-imx6ul does not have a GPIO for selecting Falcon versus normal
mode, enter in Falcon mode when the customer selects the
CONFIG_SPL_OS_BOOT option in menuconfig.
Signed-off-by: Otavio Salvador
---
Changes in
Signed-off-by: Otavio Salvador
---
Changes in v3: None
Changes in v2: None
board/technexion/pico-imx6ul/README | 22 +-
1 file changed, 9 insertions(+), 13 deletions(-)
diff --git a/board/technexion/pico-imx6ul/README
b/board/technexion/pico-imx6ul/README
index a5415714ee.
Due the changes in previous commits, we need to resync the defconfig
to reduce noise in next commits.
Signed-off-by: Otavio Salvador
---
Changes in v3: None
Changes in v2: None
configs/pico-imx6ul_defconfig | 20
1 file changed, 4 insertions(+), 16 deletions(-)
diff --git
The FSL_USDHC support is now handled by Kconfig and it is enabled on
the respective `defconfig` so the setting in .h is pointless.
Signed-off-by: Otavio Salvador
---
Changes in v3: None
Changes in v2: None
include/configs/pico-imx6ul.h | 1 -
1 file changed, 1 deletion(-)
diff --git a/include
From: Fabio Estevam
Falcon mode allows the SPL to load and jump directly to the kernel,
without loading U-Boot proper.
Add detailed step by step on how to use Falcon mode on pico-imx6ul.
Signed-off-by: Fabio Estevam
Signed-off-by: Otavio Salvador
---
Changes in v3:
- new patch
Changes in v2
Hi Otavio,
On Thu, Sep 13, 2018 at 4:57 PM, Otavio Salvador
wrote:
> The FSL_USDHC support is now handled by Kconfig and it is enabled on
> the respective `defconfig` so the setting in .h is pointless.
Just checked and I don't see FSL_USDHC option in Kconfig.
> Signed-off-by: Otavio Salvador
>
On Thu, Sep 13, 2018 at 5:14 PM Fabio Estevam wrote:
>
...
> I see that CONFIG_FSL_USDHC is defined inside "mx6_common.h", which is
> already included in this file, so the change looks good, but the
> commit message needs to be reworked.
Like:
pico-imx6ul: Remove CONFIG_FSL_USDHC from .h
The CO
Hi,
I am submitting the following patch to resolve issue below:
When using the load command with a btrfs filesystem, the return code of
that command if always success even if the command failed. The problem
is the do_load command in fs.c who assume any positive return code from
fs_read as success.
On Thu, Sep 13, 2018 at 6:33 PM, Otavio Salvador
wrote:
> On Thu, Sep 13, 2018 at 5:14 PM Fabio Estevam wrote:
>>
> ...
>> I see that CONFIG_FSL_USDHC is defined inside "mx6_common.h", which is
>> already included in this file, so the change looks good, but the
>> commit message needs to be rewor
Hi Otavio,
On Thu, Sep 13, 2018 at 4:56 PM, Otavio Salvador
wrote:
> From: Fabio Estevam
>
> Instead of keeping a custom environment, use a more generic approach
> by switching to disto config.
If you send a new version, please fix the typo: it should be "distro",
not "disto"
Thanks
__
This adds support for the ASUS C201, a RK3288-based clamshell
device. The device tree comes from linus's linux tree at
3f16503b7d2274ac8cbab11163047ac0b4c66cfe. The SDRAM parameters
are for 4GB Samsung LPDDR3, decoded from coreboot's
src/mainboard/google/veyron/sdram_inf/sdram-lpddr3-samsung-4GB.in
Taken from coreboot's src/soc/rockchip/rk3288/sdram.c
Without this change, my u-boot build for the asus c201 chromebook (4GiB)
is incorrectly detected as 0 Bytes of ram.
Signed-off-by: Marty E. Plummer
---
arch/arm/mach-rockchip/sdram_common.c | 2 ++
1 file changed, 2 insertions(+)
diff --git
On Thu, Sep 13, 2018 at 6:49 PM Fabio Estevam wrote:
>
> On Thu, Sep 13, 2018 at 6:33 PM, Otavio Salvador
> wrote:
> > On Thu, Sep 13, 2018 at 5:14 PM Fabio Estevam wrote:
> >>
> > ...
> >> I see that CONFIG_FSL_USDHC is defined inside "mx6_common.h", which is
> >> already included in this file,
> -Original Message-
> From: Lothar Waßmann [mailto:l...@karo-electronics.de]
> Sent: 2018年9月13日 23:59
> To: Peng Fan
> Cc: sba...@denx.de; Fabio Estevam ;
> u-boot@lists.denx.de
> Subject: Re: [U-Boot] [PATCH V4 24/32] power: Add power domain driver for
> i.MX8
>
> Hi,
>
> On Wed, 5
> -Original Message-
> From: Lothar Waßmann [mailto:l...@karo-electronics.de]
> Sent: 2018年9月13日 23:56
> To: Peng Fan
> Cc: sba...@denx.de; Fabio Estevam ;
> u-boot@lists.denx.de
> Subject: Re: [U-Boot] [PATCH V4 32/32] imx: add i.MX8QXP MEK board support
>
> Hi,
>
> On Wed, 5 Sep 201
Hi Anand,
On Thu, Sep 13, 2018 at 08:39:52PM +0530, Anand Moon wrote:
> Hi Simon,
>
> On Wed, 12 Sep 2018 at 17:25, Simon Shields wrote:
> >
> > Hi,
> >
> > This patch series adds support for using U-Boot's SPL as the second
> > stage bootloader ("BL2") on Exynos4412 SoCs.
> >
> > - Patch #1 add
Correct scrolling in EFI applications like the EFI Shell requires correct
setting of the terminal size. Detecting the terminal size over the serial
interface is often not supported. The patch introduces the environment
variables LINES and COLUMNS to set the terminal size manually.
Signed-off-by: H
Hi Marek,
On 10 September 2018 at 01:38, Marek Vasut wrote:
>
> On 09/02/2018 03:07 AM, Simon Glass wrote:
> > Hi Marek,
>
> Hi,
>
> > On 1 September 2018 at 16:45, Marek Vasut wrote:
> >>
> >> On 09/01/2018 11:50 PM, Simon Glass wrote:
> >>> Hi Marek,
> >>>
> >>> On 30 August 2018 at 07:42, Mar
Hi Marek,
On 11 September 2018 at 14:58, Marek Vasut wrote:
> The PCI controller can have DT subnodes describing extra properties
> of particular PCI devices, ie. a PHY attached to an EHCI controller
> on a PCI bus. This patch parses those DT subnodes and assigns a node
> to the PCI device instan
Hi Marex,
On 11 September 2018 at 14:58, Marek Vasut wrote:
> Reword the documentation to make it clear the compatible string is now
> optional, yet still matching on it takes precedence over PCI IDs and
> PCI classes.
>
> Signed-off-by: Marek Vasut
> Cc: Simon Glass
> Cc: Tom Rini
> ---
> V3:
On 14.09.18 06:41, Heinrich Schuchardt wrote:
> Correct scrolling in EFI applications like the EFI Shell requires correct
> setting of the terminal size. Detecting the terminal size over the serial
> interface is often not supported. The patch introduces the environment
Can you give examples on
On 09/14/2018 07:21 AM, Alexander Graf wrote:
>
>
> On 14.09.18 06:41, Heinrich Schuchardt wrote:
>> Correct scrolling in EFI applications like the EFI Shell requires correct
>> setting of the terminal size. Detecting the terminal size over the serial
>> interface is often not supported. The patc
39 matches
Mail list logo