Hi
I am using a Mini2440 Board and using Uboot-1.3.2 on it. I am connecting it
to a my Host Machine which has Ubuntu 11.04 on it.
After downloading the Uboot image on the board, through USB, I am able to
boot up and set the environment variables like
ipaddr,serverip, netmask and ethaddr, to
Hi All,
I am facing a very strange problem. I have a MINI2440 SBC which I am
connecting to my laptop with Ubuntu11.04. I have downloaded the Uboot
configured for mini2440 and its version is 1.3.2. I have successfully
transferred the Uboot code on the SBC. But when I am trying to do a TFTP
from
Hi
I am adding boot support from OneNand for OMAP3430 SoC- based zeus board in
uboot. While compiling the code, start.S gets copied from
arch/arm/cpu/armv7/ to onenand_ipl/board/zeus/location and then I get
the following error.
start.o: In function `call_board_init_f':
Hi All,
In top-level Makefile, there are some tricks to support more config
items. For example,
Lite5200_config \
Lite5200_LOWBOOT_config \
Lite5200_LOWBOOT08_config \
icecube_5200_config \
icecube_5200_LOWBOOT_config
On Wed, Apr 8, 2009 at 2:42 PM, Shankar Ganesh shankargane...@gmail.com wrote:
On Tue, Apr 7, 2009 at 11:02 AM, os user gnuse...@gmail.com wrote:
Hi,
The data in NAND chip(linux kernel and RootFS) is the same when
booting linux from U-Boot and from the simple loader. :-(
On Sat, Apr 4
Hi,
Actually the code is based on Atmel's bootstrap.
On Fri, Apr 3, 2009 at 7:57 PM, Jean-Christophe PLAGNIOL-VILLARD
plagn...@jcrosoft.com wrote:
On 14:44 Fri 03 Apr , os user wrote:
Hi all,
I want to boot linux by a simplified bootloader. I use Atmel's ARM
chip (AT91SAM9RL64EK board
Sure, the Code will be GPL based.
On Sat, Apr 4, 2009 at 1:51 AM, Wolfgang Denk w...@denx.de wrote:
Dear os user,
In message 34f262ce0904022344u6e27ad07g8263785dd36ac...@mail.gmail.com you
wrote:
I want to boot linux by a simplified bootloader. I use Atmel's ARM
chip (AT91SAM9RL64EK board
Hi,
The data in NAND chip(linux kernel and RootFS) is the same when
booting linux from U-Boot and from the simple loader. :-(
On Sat, Apr 4, 2009 at 12:53 AM, Scott Wood scottw...@freescale.com wrote:
On Fri, Apr 03, 2009 at 02:44:03PM +0800, os user wrote:
I want to boot linux
nand booting support (SPL) for phyCORE-i.MX31
This patch allows Phytec phyCORE-i.MX31 based system to boot from embed
NAND-flash memory.It not add support for NAND cmd and/or driver for U-BOOT,
it is only SPL for U-BOOT. For NAND support in U-BOOT I give refer to
Magnus Lilja's aug/2008 patch
9 matches
Mail list logo