Here are the files.
All of these files are with the Orinoco card out of the laptop.
Inserting the Orinoco card into the laptop makes no change. I can
enter "sudo modprobe orinoco_cs" and it works - when I call lsmod,
both orinoco and orinoco_cs are loaded, but the card is not detected
by iwconfig
I guess I read vvv as wv. This is the correct lspci.
00:00.0 Host bridge [0600]: ATI Technologies Inc AGP Bridge [IGP 320M]
[1002:cab0] (rev 13)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr
lspci give me an error when I try to use the "w" flag, I did sudo
lspci -vnn > lspci.txt instead
also, I couldn't run lshal because the HAL package is not installed
and I have no way to install it.
I will attach files in a later message. For now, I thought I'd record
my screen (as best I could) a
Can all those experiencing this issue attach the following text files:
sudo lspci -vvvnn > lspci.txt# Note: sudo allows for capabilities to be
captured also.
sudo dmidecode > dmidecode.txt # Note: sudo is required for this because
/dev/mem is read.
lshal > hal.txt
Also, please submit dmes
I assume I'm having this same problem with Gutsy (x86 server) and an
orinoco silver card. I would very much like an investigation into this
issue.
** Also affects: linux-source-2.6.22 (Ubuntu)
Importance: Undecided
Status: New
--
Inserting Orinoco pcmcia card causes hard lockup
https:
The actual kernel am using is 2.6.22-14-server, the kernel that comes
with the 7.10 x86 server install disc
--
Inserting Orinoco pcmcia card causes hard lockup
https://bugs.launchpad.net/bugs/56251
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to
This bug has had no activity for a considerable period. This is a check
to see if there is still interest in investigating this bug report.
** Changed in: linux-source-2.6.20 (Ubuntu)
Status: New => Incomplete
** Changed in: linux-source-2.6.20 (Baltix)
Status: New => Incomplete
**