I have an email account with RunRev: @sage.on-rev.com
It has worked flawlessly for many years, but for several weeks now all email
sent from this account to Microsoft addresses (for example, Hotmail and MSN)
have bounced. (All addresses on my list, other than the MS addresses, go
through
problem.
>
> Hope it works!
>
> Rick
>
>> On Dec 20, 2018, at 3:22 PM, James Hurley via use-livecode
>> wrote:
>>
>> I am having trouble running a stack on 7.1.1, Community
>>
>> I have had no problem with it in the past.
>>
>>
I am having trouble running a stack on 7.1.1, Community
I have had no problem with it in the past.
But now it will not display the Tools Palette.
Closing any window I get the message “Do you want to save….” I have to click
“Cancel” to proceed
The stack runs, but erratically.
So I thought
There are significant differences in speed between 5.5 and 6.6. Not so much in
deriving the permutations as in displaying the results in a field.
To see this run this in the message box:
go url https://dl.dropboxusercontent.com/u/47044230/PermutationSpeed3.rev”
(Does this only work in LC 6
Sorry about that last post. Forgot to delete all message above Geoff’s.
Jim
___
use-livecode mailing list
use-livecode@lists.runrev.com
Please visit this url to subscribe, unsubscribe and manage your subscription
preferences:
How do I set the loc of the cursor? By script, of course.
Jim
___
use-livecode mailing list
use-livecode@lists.runrev.com
Please visit this url to subscribe, unsubscribe and manage your subscription
preferences:
I one executes a revStopSpeach, is it possible to learn the point
in the text where the speaking was stopped?
Jim
___
use-livecode mailing list
use-livecode@lists.runrev.com
Please visit this url to subscribe, unsubscribe and manage your
This problem has just come up within the last few days. When I try to access
the RR archives at:
http://lists.runrev.com/pipermail/use-livecode/2011-November/date.html
I get the following message:
Forbidden
You don't have permission to access
/pipermail/use-livecode/2011-November/date.html
Thanks Mike and Mark.
I just wish it weren't so complicated.
Jim
Jim,
I believe that should be: put msg into myVar
--
Best regards,
Mark Schonewille
Mike Bonner wrote:
This works.
put msg into field 1
___
use-livecode mailing
is it possible to terminate (exit) a repeat loop with a mouseDoubleUp?
Thanks,
Jim Hurley
___
use-livecode mailing list
use-livecode@lists.runrev.com
Please visit this url to subscribe, unsubscribe and manage your subscription
preferences:
Is there a way, by script, to copy the text in the msg box, not the
command line but the field below.
Thanks, Jim
___
use-livecode mailing list
use-livecode@lists.runrev.com
Please visit this url to subscribe, unsubscribe and manage your
as you suggest, I can roll my own answer dialogue.
This would give me more flexibility. I assume many others take this route.
Thanks, again,
Jim Hurley
On Nov 17, 2011, at 10:05 AM, James Hurley wrote:
Can one set the location of the popup dialog box? In my application, it
obscures
Can one set the location of the popup dialog box? In my application, it
obscures the object it is addressing.
___
use-livecode mailing list
use-livecode@lists.runrev.com
Please visit this url to subscribe, unsubscribe and manage your subscription
Is there a message I might trap to run a script after pasting text into a
field?
___
use-livecode mailing list
use-livecode@lists.runrev.com
Please visit this url to subscribe, unsubscribe and manage your subscription
preferences:
is all Greek to me.
Jim
On 11/13/11 12:01 AM, James Hurley wrote:
function r tA --Radial distance to the ellipse as afunction of the angle
put (cos(tA*pi/180))^2 / (a*a) + (sin(tA*pi/180))^2 / (b*b) into temp
return 1/sqrt(temp)
end r
This means something, right? Well, for your
By the way, to see how different the startAngle is from the polar angle, make a
very wide oval with a very small height.
Set the startangle to 45 degrees and the arcangle to say 250. The start angle
appears to be about 10 degrees.
___
use-livecode
Hugh,
Would this help? The script below will draw a polygon that looks like an
ellipse with a start and stop angle.
The trouble with the start angle and the arcangle in RR is that they are not
polar angles but are related in a complex way:
arcAngle = arctangent( b/a * tangent(polarangle)
Message: 1
Date: Sun, 06 Nov 2011 15:05:13 -0800
From: Roger Guay i...@mac.com
To: use-livecode@lists.runrev.com
Subject: ANN: Harmonic Oscillators
Message-ID: f7e8eebe-f917-4def-b50a-2b1d5a46c...@mac.com
Content-Type: text/plain; CHARSET=US-ASCII
Not so much an exhaustive
Kresten,
I think I understand. The card script below will create n button and n * (n-1)
connecting lines.
As the buttons are moved the connecting lines follow.
Jim Hurley
local myNAME, n
on mouseDown
put the short name of the target into myName
put 5 into n
repeat with i = 1 to n
Correction: That should have been n * (n-1)/2 connecting lines. Same as the
number of hand shakes among n people. :-)
Jim
___
use-livecode mailing list
use-livecode@lists.runrev.com
Please visit this url to subscribe, unsubscribe and manage your
Message: 10
Date: Wed, 26 Oct 2011 15:05:09 -0700
From: Pete p...@mollysrevenge.com
To: How to use LiveCode use-livecode@lists.runrev.com
Subject: Re: When has a field changed?
Message-ID:
CABx6j9k5s_42TG85A-HL_yMoGD9cccKtQbD=bk9rbomadua...@mail.gmail.com
Content-Type: text/plain;
I have a text field (unlocked) that the user can edit, but I want to know when
and to deal with the changes.
Here is what I have come up with, something of a kludge. Is there a cleaner way?
on mouseEnter --Enter the field
set the textChange of me to false
end mouseEnter
on rawkeydown tKey
Thanks all. Problem solved.
The closeField is triggered only when the field is changed and the focus is
changed to something outside the field.
The only problem is when the next selection is a button (on the Mac at least)
the focus remains in the field.
The work around, as several pointed
And now, back to Earth and breakfast.
Alejandro Tejada wrote:
James Hurley wrote:
My cup already runneth over. I'm 80 years old now, but still manage to
keep busy.
Only my memory is shot. But there are advantages to that as well.
There is a lot I won't mind losing track of.
Well
It doesn't do very much, it gets stuck at line 47 quickly:
put asin(sinGamma) into gamma
On Oct 18, 2011, at 2:49 PM, James Hurley wrote:
go url http://jamesphurley.com/jhurleyFolder/NineBallWithProjections.rev;
Colin,
There is a quirk in Mac OS. It shows a value of the sinGamma
for the cue ball, and draws that line showing the projected result. You
can't miss. Not much fun unless you are failure averse.
go url http://jamesphurley.com/jhurleyFolder/NineBallWithProjections.rev;
Jim Hurley
[Alejandro wrote: ]
James Hurley wrote:
[snip]
Kevin and I discussed
Reposting with the proper Subject:
Message: 4
Date: Tue, 18 Oct 2011 09:47:26 -0700
From: James Hurley jhurley0...@sbcglobal.net
To: use-livecode@lists.runrev.com
Subject: Re: use-livecode Digest, Vol 97, Issue 37
Message-ID: 6a7f939b-3627-43df-95a0-84401c010...@sbcglobal.net
Content-Type: text
Hi Al,
On Oct 18, 2011, at 11:54 AM, Alejandro Tejada wrote:
Hi Jim,
James Hurley wrote:
Al,
The potential for LC in education is two-fold. One is in writing
educational software and the other is LC as a programming environment.
I see the latter as more valuable, particularly
Al,
This all started while was teaching at the university and working with a local
grade school teacher. At that time Logo was all the rage and I thought it would
be an ideal language in which young children might solve interesting physics
problems, essentially implement numerical methods to
i have been experimenting with the new rendering tools in 5.0
Here is a stack that allows you to experiment for yourselves. Run this in the
message box.
go url http://jamesphurley.com/jhurleyFolder/SimpleMotion.livecode;
It doen't appear that 5.0 is that different from 4.6 when the graphic
Thank you for this Bernd. It is going to take me a while to digest these new
graphic features in 5.0. I confess I am unaware of the interaction between RR
code and the display on the screen. That's probably important. :-)
Like you, I don't see much improvement of 5.0 over 4.6 in animation.
?
Message-ID: 4e959c2b.5080...@fourthworld.com
Content-Type: text/plain; charset=ISO-8859-1; format=flowed
James Hurley wrote:
Thank you for this Bernd. It is going to take me a while to digest these new
graphic features in 5.0. I confess I am unaware of the interaction between
RR code
Colin,
Thanks for this. Very informative.
I tried, using Brnd's MoveTest utility and the Move command is markedly
smoother at a syncRate of 6 over that at 17.
I need to do some experimentation to test 5.0. I'm hoping that RR educates us
on how best to take advantage of the improvements in
.
On Oct 11, 2011, at 12:52 PM, James Hurley wrote:
Frustration with animation on the Mac, I guess.)
___
use-livecode mailing list
use-livecode@lists.runrev.com
Please visit this url to subscribe, unsubscribe and manage your subscription
I suspect this is a problem peculiar to the Mac.
When I run:
set the lockmoves to true
move grc Oval to tPoints without waiting
move grc rectangle to tNewPoints without waiting
set the lockmoves to false
The oval moves reasonably smoothly, but the rectangle take several abrupt
I should have said that this is a Mac OS 10 problem.
I suspect this is a problem peculiar to the Mac.
When I run:
set the lockmoves to true
move grc Oval to tPoints without waiting
move grc rectangle to tNewPoints without waiting
set the lockmoves to false
The oval moves
Ken,
Thanks for your careful test. This is driving me nuts and I can't find a
work-around.
I think the problem is RR not doing a screen refresh after each of the MULTIPLE
steps. (I have always, in OS 10) had to do a refresh after EACH step.
Would you please try this for me:
on mouseUp
put
Bob,
Here is what I get on the lockMove messages. (I'm on the email digest so I have
trouble copying your message.)
on mouseUp
put 200 into x
put 200 into y
put 2 into dx
put 1 into dy
repeat 100 times
put x,y cr after tPoints
add dx to x
end repeat
put 200
Ken,
The script I sent you was just an example and I simplified what I ultimately
would like to try.
I would like, for example, to simulate dynamical motion, for example projectile
motion, and that requires fairly close spacing of the points. Or motion around
an elliptical orbit. Generally
: text/plain; charset=ISO-8859-1; format=flowed
On 10/10/11 6:04 PM, James Hurley wrote:
Ken,
Thanks for your careful test. This is driving me nuts and I can't
find a work-around.
The workaround might be LiveCode 5.0, where animation has been greatly
enhanced.
That said, I have
Message: 16
Date: Sun, 02 Oct 2011 19:25:25 -0500
From: J. Landman Gay jac...@hyperactivesw.com
To: How to use LiveCode use-livecode@lists.runrev.com
Subject: Re: Setting visible of control within group to false
Message-ID: 4e8900f5.3010...@hyperactivesw.com
Content-Type: text/plain;
Is this supposed to happen? When I set the visible of a control within a group
to false, it is removed from the group.
As a work-around I find that if I include a rectangle that physically
encompasses everything in the group and THEN set the visible of a control
within the rectangle to false,
only its visible contents, but the hidden object/s should continue to remain
part of the group. If you're seeing something else, it would be good know
what the circumstances are.
Regards,
Scott Rossi
Creative Director
Tactile Media, UX Design
Recently, James Hurley wrote
Message: 10
Date: Fri, 2 Sep 2011 11:21:17 -0400
From: Jonathan Lynch jonathandly...@gmail.com
To: use-livecode@lists.runrev.com
Subject: Copying from MS word into RunRev 4.0
Message-ID:
CAC-_fWRN6P5_cmTPHZu3cqT7YTh95r22wudGo=w4apdplt5...@mail.gmail.com
Content-Type: text/plain;
How do I replace the quote character in a string using the replace command?
Replace [] with # in tList
Jim Hurley
___
use-livecode mailing list
use-livecode@lists.runrev.com
Please visit this url to subscribe, unsubscribe and manage your
I discovered I have the MS curly quotes. This is what works for these:
replace numToChar(210) with # in tList
replace numToChar(211) with # in tList
Thanks Mike and Jerry.
Jim Hurley
___
use-livecode mailing list
use-livecode@lists.runrev.com
Please
Message: 15
Date: Wed, 20 Jul 2011 15:19:07 -0400
From: Roger Eller roger.e.el...@sealedair.com
To: How to use LiveCode use-livecode@lists.runrev.com
Subject: Re: Countdown HH:MM:SS
Message-ID:
CAAT6EXPFGQY-=S6irWxERo3BXK=ftn5y+bjdn55plqvz3lk...@mail.gmail.com
Content-Type:
Roger
Is this what you are looking for?
on mouseUp
set itemdel to :
put the long time into tTime
put char 1 to -4 of tTime into field 1
convert tTime to dateItems
set the hms of me to tTime
countDown
end mouseUp
on countDown
put the hms of me into temp
subtract 1
Roger,
I forgot the stop clause. Maybe:
if field 1 is 0:0:0 then --or whatever
--Do your business
else
send countDown to me in 1 sec
end if
Roger
Is this what you are looking for?
on mouseUp
set itemdel to :
put the long time into tTime
put char 1 to -4 of tTime into
--
Message: 7
Date: Thu, 14 Jul 2011 10:06:01 -0500
From: Ronald Zellner zell...@tamu.edu
To: use-livecode@lists.runrev.com
Subject: Re: repeat with i=
Message-ID: f324e51b-41d7-4882-a0c8-7ee09c9f6...@tamu.edu
Content-Type: text/plain; charset=us-ascii
I haven't been following this thread so my apologies if I'm missing the point,
but a while back I had to deal with the task of selecting m random people for a
voter pole from a list N registered voters, where N was over 100,000.
Check out Random pick in Rev Online. I found using an array 3
---
Message: 2
Date: Thu, 09 Jun 2011 14:11:19 -0700
From: Richard Gaskin ambassa...@fourthworld.com
To: use-livecode@lists.runrev.com
Subject: Re: find by content with Mac OS
Message-ID: 4df136f7.3050...@fourthworld.com
Content-Type: text/plain; charset=ISO-8859-1;
-
Message: 4
Date: Fri, 10 Jun 2011 10:32:45 -0700
From: Bob Sneidar b...@twft.com
To: How to use LiveCode use-livecode@lists.runrev.com
Subject: Re: find by content with Mac OS
Message-ID: d5d8a1a4-b064-42ef-ad61-dcd6d5cec...@twft.com
Content-Type: text/plain;
If one copies a Word document from within Word and pastes that copy into a LC
field, much of the formatting is retained.
Not so if one just uses: get url file: tFileName
Is there a way, within LC, to obtain the copy and paste formatting, perhaps
with an imbedded AppleScript?
Thanks,
Jim
Message: 10
Date: Thu, 9 Jun 2011 16:20:42 +0200
From: Mark Schonewille m.schonewi...@economy-x-talk.com
To: How to use LiveCode use-livecode@lists.runrev.com
Subject: Re: Importing Word documents
Message-ID: dcf3260a-5b5c-40b4-becc-4785230e6...@economy-x-talk.com
Content-Type:
Schonewille
Economy-x-Talk Consulting and Software Engineering
Homepage: http://economy-x-talk.com
Twitter: http://twitter.com/xtalkprogrammer
KvK: 50277553
New: Download the Installer Maker Plugin 1.6 for LiveCode here
http://qery.us/ce
On 9 jun 2011, at 19:29, James Hurley wrote
Craig,
Not my situation but a good point.
I'm surprised that RR didn't allow for greater level of specification in where
to look, as in
Find tWord in field [or veld] myField of this card
Jim
I assumed that you were talking about grouped backGround fields that also
would have had the
Put the name of control 1 in group id 1005
doesn't work.
Any suggestions? Best I can do is get the number of controls in a group. I need
the names.
Jim Hurley
___
use-livecode mailing list
use-livecode@lists.runrev.com
Please visit this url to
Recently, James Hurley wrote:
Put the name of control 1 in group id 1005
doesn't work.
Any suggestions? Best I can do is get the number of controls in a group. I
need the names.
Try:
put the name of control 1 *of* group id 1005
Regards,
Scott Rossi
Creative Director
Tactile
I prefer the tab panel to the drop down menus. The choices are always
visible.
But I have a problem. If a particular tab is selected, it will no
longer respond to a menuPick message.
Normally this is not a problem, but I am using the panel to select
lines or sentences from a long text
Thanks everyone. You always come through.
You have taught me a new property: MenuHistory
I have found the following works for me. In place of the MenuPick handler I
used only a mouseUP handler.
(The TabMenu object handles all the highlighting chores.)
on mouseUp
put the menuhistory of me
March 2011 08:06, James Hurley jhurley0...@sbcglobal.net wrote:
___
use-livecode mailing list
use-livecode@lists.runrev.com
Please visit this url to subscribe, unsubscribe and manage your subscription
preferences:
http://lists.runrev.com/mailman/listinfo
/12/11 12:25 PM, James Hurley wrote:
But there are still some issues. In the OSX menu I now see 4 menus
only 3 of which are of my doing. They are:
LiveCode File Edit Help
Those are standard OS X conventions. The first menu item is supplied by
the OS and is always the name
%R$$#^#*((
I'm trying to keep this clean.
I'm getting nowhere with the menu bar. (Mac OS)
I have two item in the menu bar, a File menu and a Help menu. They both
work as expected in the IDE.
But when I set the menubar property of the stack to the name of the menu bar
group, the menu
Peter,
Thanks. Very interesting.
A couple of questions.
Is lineoffsets a custom function or a typo?
And what is the sr function?
Thanks again,
Jim Hurley
On Feb 15, 2011, at 10:00 AM, use-livecode-requ...@lists.runrev.com wrote:
function getMileage
put
I dissevered this the hard way.
Put this into the script of a scrollbar:
on scrollbardrag
put the thumbposition of me into x
put x into field 1
put x*1 into field 2
end scrollbardrag
You will find that field 1 gets the round(x) while field 2 gets the decimal
value of the thumb
Message: 33
Date: Thu, 30 Dec 2010 17:14:38 -0600
From: J. Landman Gay jac...@hyperactivesw.com
To: How to use LiveCode use-livecode@lists.runrev.com
Subject: Re: Missing plug-in. Again
Message-ID: 4d1d125e.3080...@hyperactivesw.com
Content-Type: text/plain; charset=ISO-8859-1; format=flowed
On
Message: 14
Date: Sun, 19 Dec 2010 23:41:05 -0800 (PST)
From: JosepM jmye...@mac.com
To: use-revolut...@lists.runrev.com
Subject: Re: How detect the object over other object is?
Message-ID: 1292830865948-3095145.p...@n4.nabble.com
Content-Type: text/plain; charset=us-ascii
Yes, but I need to
--
Message: 6
Date: Mon, 6 Dec 2010 10:33:02 -0500
From: Walt Brown walter.h.br...@gmail.com
To: 'How to use LiveCode' use-livecode@lists.runrev.com,
use-revolut...@lists.runrev.com
Subject: RE: focus question
Message-ID:
I sent this message a while back, but I suspect it got lost in the
RunRev-LiveCode changeover.
At the USPS web site (http://zip4.usps.com/zip4/) it is possible by
entering the street address, the city and the state to obtain the 9
digit zip code for that address.
This may be naive, but
where my data (address, city and St)
goes into field 1. I think that is what I am missing.
I don't see visited=1pagenumber=0 etc. anywhere in field 1 or 2.
Floundering,
Jim
James Hurley wrote:
At the USPS web site (http://zip4.usps.com/zip4/) it is possible by
entering the street
don't mind working on the parsing to do the put and get, but I'm
sure I missing the ingredient where my data (address, city and St)
goes into field 1. I think that is what I am missing.
I don't see visited=1pagenumber=0 etc. anywhere in field 1 or 2.
Floundering,
Jim
James Hurley
72 matches
Mail list logo