Ken Jones wrote:
On Wednesday 12 May 2004 3:05 pm, James Treworgy wrote:
I'm relatively new to vpopmail/qmailadmin so I don't know if this is
possible to configure either by hand or through qmailadmin. I've read
everything I could and couldn't find an answer to my question; the
in
does anyone why its happening ?
Thanks,
Mark
are you using the same userid to compile with as you have used to
download the source? Maybe you should chown the files first
Hi peeps,
Yesterday I managed to get imap authentication working for virtual
accounts, but now I tried to connect through pop3, but I keep on getting
authentication errors. I assume it is a similair problem as with imap auth.
Can anybody tell me how to get this working? I'm sure that I can get i
Jeremy Kitchen wrote:
On Tuesday 11 May 2004 09:04 am, Patrick Donker wrote:
[snip can't authenticate with pop]
Here is my pop3 run file:
#!/bin/sh
env - PATH="/var/qmail/bin:/usr/local/bin" \
exec softlimit -m 200tcpserver -u 89 -g 89 -v -H -R -l 0 0 110 \
how can I get it to build for x86-64 target?
I would start with mailing to [EMAIL PROTECTED]
In addition to my earlier posted problem I have found out the following:
If I check the imapd/current log I see that it tries to chdir to /home/test
After I created the new user skel consisting out of a homedir+maildir I
can log in. However, the mailbox is still empty. Mail is delivered to
/serve
Andrew Niemantsverdriet wrote:
I have a user who currently has about .5 Megs of messages in their
mailbox. However the quota usages says that are using 97% of there
quota. Has anybody had a problem like this before? Or does anybody have
any suggestions on how to fix it?
_
/-\ ndrew
http://www.pure
It appeared that the daemontools run file was pointing to the wrong
authlib; authshadow while authvchkpw was needed. All is working as expected.
So, every person who was franticly looking for an answer to help me out,
thanks. Oh wait, nobody repliedwell thats ok :)
-Patrick
Radu Spineanu wrote:
Hello
In older versions of vpopmail when i compiled it with --enable-default-domain
it worked for imap also, however on my installation with the default domain
etc/defaultdomain it doesn't work for imap.
I am using the authvchkpw module for imap
Radu
Where can I find t
Hi all,
I have the strangest of problems going on after installing vpopmail &
qmailadmin. But first some history;
At first I installed Qmail + Courier-Imap + Squirrelmail, which all
worked fine using 1 domain and system users.
After that I wanted to host multiple domains, so I created one using
[EMAIL PROTECTED] wrote:
Dear PayPal user
Dear [EMAIL PROTECTED],
We recently reviewed your account, and suspect that your PayPal account
may
have been accessed by an unauthorized third party. Protecting the
security
of your account and of the PayPal network is our pr
[EMAIL PROTECTED] wrote:
[EMAIL PROTECTED] wrote:
Dear [EMAIL PROTECTED],
right...
the links
https://%32%31%31%2E%32%38%2E%31%35%35%2E%32%31%30/%2E%76%65%72%69%66%69%63%61%74%69%6F%6E/%68%69%64%65/%69%6E%64%65%78%32%2E%68%74%6D"
and a windo
Hi all,
I'm new to both this list and linux so forgive my ignorance and that my
question most likely has been asked before.
I have been trying to install just about any version of vpopmail, but all have
problems when I run make.
I use this commandline to install:
[EMAIL PROTECTED]:~/vpopmail-5.
Hi all,
I'm new to both this list and linux so forgive my ignorance and that my
question most likely has been asked before.
I have been trying to install just about any version of vpopmail, but all have
problems when I run make.
I use this commandline to install:
[EMAIL PROTECTED]:~/vpopmail-5.
Anybody willing to comment on my problem, or are there only 3 people on
this list?
Patrick Donker wrote:
Hi all,
I'm new to both this list and linux so forgive my ignorance and that my
question most likely has been asked before.
I have been trying to install just about any versi
David Wolfskill wrote:
On Tue, May 04, 2004 at 09:50:01PM +0200, Patrick Donker wrote:
Anybody willing to comment on my problem, or are there only 3 people on
this list?
Some of us who are on the list are not qualified to respond to what
appear to be Linux-specific
Jeremy Kitchen wrote:
http://scriptkitchen.com/godkills.jpg <-- please, think of the kittens.
On Tuesday 04 May 2004 02:50 pm, Patrick Donker wrote:
Anybody willing to comment on my problem, or are there only 3 people on
this list?
patience is a virtue. Your fi
have you tried:
touch *
in the root of the source tree?
-Jeremy
Thanks for this tip Jeremy; it solved my problem.
Only thing is that I dont understand why. I've looked at man touch, and
I know what it does, but dont understand why and how it solved my
problem(?). Maybe you can clue me in? If
Dude, relax!
Rick Widmer wrote:
Its not a fucking instant message system!
Plan to wait for up to a day for an answer, not one hour
Patrick Donker wrote:
David Wolfskill wrote:
On Tue, May 04, 2004 at 09:50:01PM +0200, Patrick Donker wrote:
Anybody willing to comment on my problem, or
X-Istence wrote:
Jeremy Kitchen wrote:
On Tuesday 04 May 2004 03:28 pm, Patrick Donker wrote:
have you tried:
touch *
in the root of the source tree?
-Jeremy
Thanks for this tip Jeremy; it solved my problem.
Only thing is that I dont understand why. I've looked at man touch, and
I know
Jeremy Kitchen wrote:
On Tuesday 04 May 2004 05:31 pm, X-Istence wrote:
have you tried:
touch *
in the root of the source tree?
Mabey its time to fix your server time.
happened to
Tom Collins wrote:
On May 5, 2004, at 12:25 PM, X-Istence wrote:
ntpdate ntp.nasa.gov before you build the tar ball :P.
Actually, it's more a problem of the CVS server not maintaining the
proper dates on the files used in the build process. It has to do
with relative dates (which files are newe
Vitaliy Sholokhov wrote:
but will I still be able to authenticate via vpopmail and recieve mail
through imap on all of my virtual domains?
- Original Message -
From: "Vitaliy Sholokhov" <[EMAIL PROTECTED]>
Hey, everyone
I am using netqmail 1.05, vpopmai
Pls include your bug report
Mário Gamito wrote:
Hi,
I've installed vpopmail, but i'm having problems with adding domains.
The first one i add works just fine.
From the second one on i get this error:
"Signal 1 caught by ps (procps version 2.0.13).
Please send bug reports to <[EMAIL PROTECTED]>"
I'v
Mário Gamito wrote:
Sorry, but i don't understand your issue.
Would you care to explain it more specifically, please ?
Warm Regards,
Mário Gamito
-Original Message-
From: Patrick Donker [mailto:[EMAIL PROTECTED]]
Sent: Sunday, May 16, 2004 12:25 PM
To: [EMAIL PROT
Mário Gamito wrote:
Sorry, i can't find any bug
report anywhere.
I've searched all possible files.
Any ideas ?
Warm regards,
Mário Gamito
From:
Patrick Donker [mailto:[EMAIL PROTECTED]]
Sent: Sunday, May 16, 2004 12:42 PM
Mário Gamito wrote:
Hi,
I've compiled vpopmail witg no compiler flags and with configured options:
"./configure -without-ipv6 -enable-unicode
-enable-workarounds-for-imap-client-bugs -without-authpwd -without-authpam
-without-authuserdb -without-authcram -with-authvchkpw -without-authldap
-without-
Mário Gamito wrote:
Hi,
I have -with-authvchkpw
I know it's for user's accounts-
What is missing then ?
Thank you for your answer.
Warm Regards,
-Original Message-----
From: Patrick Donker [mailto:[EMAIL PROTECTED]]
Sent: Sunday, May 16, 2004 5:34 PM
Songrit Srilasak wrote:
my manager need to view all (message) send/recieve . my opinion, when
recieving i can set forward to [EMAIL PROTECTED] but when user send email
i don't know to view message.
--
This is explained in the FAQ:
8.2. How do I keep a copy of all incoming and outgoing mail messa
Mark Matrafajlo wrote:
I just can't seem to compile courier with vpopmail and mysql as a
backend. Hopefully someone has some insight for me:
./configure --prefix=/usr/local/courier-imap --disable-root-check
--without-authpam --without-authldap --without-authpwd
--without-authmysql --withou
Mark Matrafajlo wrote:
yes...could that be it ?
On Wed, 2004-05-19 at 17:14, Patrick Donker wrote:
Mark Matrafajlo wrote:
I just can't seem to compile courier with vpopmail and mysql as a
backend. Hopefully someone has some insight for me:
./configure --p
vpopmail.h...no config.h so i cp vpopmail_config.h
to config.h...no dice
Don't do that. when you run configure ; make ; make install for vpopmail
it will install the files for you.
Ken Jones
On Wed, 2004-05-19 at 17:39, Patrick Donker
Cesare D'Amico wrote:
Alle 22:39, giovedì 20 maggio 2004, David Wolfskill ha scritto:
Is there some other choice I might plausibly make to support such
lists?
If I'd be you, I'd install an apache-ssl on the mail server with access
only to ezweb (ezmlm-idx manager, I fin
[EMAIL PROTECTED] wrote:
Hello Erwin,
Friday, May 21, 2004, 7:37:15 PM, you wrote:
EH> Hi,
EH> At 17:21 21.05.04 +0200, you wrote:
Hello Erwin,
Friday, May 21, 2004, 5:14:30 PM, you wrote:
EH> Hi,
EH> At 11:41 21.05.04 +0200, you wrote:
PD> Ahhh...yes! A flame war...always nice :)
I quote from the one who has bringing 'the gas': EH> You are joking, troll
Well, I did't start. This list is to help people. It's not about to be picky
or to be arrogant, if someone share another view, he has the right to put his vision
forward and to
Guys,
I use qmail + vpopmail + courier-imapd + squirrelmail.
My question is; what would be the easiest way to inplement a
change-password option in Squirrel? I have found a plugin, but that is
based on pam, which I dont use. I need something that uses vchkpw. My
guess is that somebody on this li
Guys,
I use qmail + vpopmail + courier-imapd + squirrelmail.
My question is; what would be the easiest way to inplement a
change-password option in Squirrel? I have found a plugin, but that is
based on pam, which I dont use. I need something that uses vchkpw. My
guess is that somebody on this list
X-Istence wrote:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Patrick Donker wrote:
Guys,
I use qmail + vpopmail + courier-imapd + squirrelmail.
My question is; what would be the easiest way to inplement a
change-password option in Squirrel? I have found a plugin, but that is
Jean Wainer wrote:
On Sat, 29 May 2004 00:32:58 +0200
Patrick Donker <[EMAIL PROTECTED]> wrote:
Guys,
I use qmail + vpopmail + courier-imapd + squirrelmail.
My question is; what would be the easiest way to inplement a
change-password option in Squirrel? I have found a
Found it, sorry
There's a "vpopmail" plugin for squirrelmail. The only catch is that you have to run apache as
"vpopmail" user.
--Jw.
Rod K wrote:
X-Istence wrote:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Jean Wainer wrote:
There's a "vpopmail" plugin for squirrelmail. The only catch is that
you have to run apache as "vpopmail" user.
Thus giving anyone that has web access or
Hi guys,
Another thrilling question;
Has anyone already set up vsftpd using virtual users + multiple domains?
I've read the virtual users hints, but they only mention one fixed
directory for the virtual ftp users, whilst I need every virtual user
have its home directory pointing to his own domai
[EMAIL PROTECTED] wrote:
Another thrilling question;
Has anyone already set up vsftpd using virtual users + multiple domains?
I've read the virtual users hints, but they only mention one fixed
directory for the virtual ftp users, whilst I need every virtual user
have its home directory
[EMAIL PROTECTED] wrote:
This will work, ofcourse, but that would make vpopmail obsolete. I just
might as well make system users then. I want the virtual users to chroot
to their domain directory automagically. And what about people who
manage their own domain and decide to add a virtua
JB wrote:
Because I want to use the same virtual users handled by vpopmail for
ftp usage. I dont want to manually create ftp accounts for users who
already exsist virtually. I know that vpopmail is for mail purposes,
but I should be able to access the vpopmail user database from within
vsftpd?
JB wrote:
You might want to concider reading the full thread before advising me
doing something I already DID!
The example you are pointing to uses one fixed dir, while I want
virtual users have their home dir pointed to their virtual domain
home dir. Also I dont want to create system accounts f
JB wrote:
Or maybe you could explain it to me because I am currently googling
on the subject and there is a whole shitload of people asking the
same question, but nobody seems to have the solution
I would setup pam to use the same ldap or mysql database as vpopmail.
Unless you have the time and
JB wrote:
Or maybe you could explain it to me because I am currently googling
on the subject and there is a whole shitload of people asking the
same question, but nobody seems to have the solution
I would setup pam to use the same ldap or mysql database as vpopmail.
Unless you have the time and
Jeremy Kitchen wrote:
On Wednesday 02 June 2004 07:46 am, JB wrote:
Or maybe you could explain it to me because I am currently googling on
the subject and there is a whole shitload of people asking the same
question, but nobody seems to have the solution
I
Jeremy Kitchen wrote:
On Wednesday 02 June 2004 11:37 am, Patrick Donker wrote:
I don't really understand how any of this really has anything to do with
vpopmail... sounds like you're needing help configuring your ftp server,
which, last I knew, was not what thi
David Petruzzella wrote:
Has anyone who is running
vpopmail/qmail/mysql
created a backup/redundant or even a secondary server for the same
domains? I’m
looking to do that and I was wondering if there was any documentation
available. Also is there any documentation
I
Alexandre Vieira wrote:
Hello folks,
I
heard that squirrelmail worked with POP3 accounts but in
the website it only says that support IMAP. Is there any patch/plugin
or
something to make it work with POP3? If no, is there any other good
webmail to
use with POP3
Fajar Priyanto wrote:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Hi all,
My squirrelmail previously can change password without any problem.
But today, when one of my user wants to change its password, there is error:
- --> server error 500. Password not changed.
What is causing this?
The versio
Fajar Priyanto wrote:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Monday 07 June 2004 03:42 pm, Patrick Donker wrote:
Fajar Priyanto wrote:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Hi all,
My squirrelmail previously can change password without any
Lars E. D. Jensen wrote:
Hi
Does anyone have experience with the vpopmail-bin package for Debian?
I have installed it, but clearopensmtp seems to cause heavy CPU load,
and I don't know why.
Further I can't get mysql support work with libvpopmail-mysql package.
Maybe a bit off topic, but if someon
Hi people,
I am having ./configure problems using mysql as authmodule. This is my
commandline:
./configure \
--prefix=$PATHINSTALLVPOPMAIL \
--enable-vpopuser=$VPOPUSER \
--enable-vpopgroup=$VPOPGROUP \
--enable-roaming-users \
--enable-tcprules-prog=$TCPRULES \
--enable-relay-clear-minutes=$ENA
Rick Macdougall wrote:
Patrick Donker wrote:
Hi people,
I am having ./configure problems using mysql as authmodule. This is my
commandline:
./configure \
--prefix=$PATHINSTALLVPOPMAIL \
--enable-vpopuser=$VPOPUSER \
--enable-vpopgroup=$VPOPGROUP \
--enable-roaming-users \
--enable
Rick Macdougall wrote:
Patrick Donker wrote:
Rick Macdougall wrote:
Hi,
It's looking for the mysql libs, not includes. On some of my
systems it's in /usr/lib/mysql, in others it's in /usr/local/mysql/lib
A locate libmysqlclient.a should show you where yours is.
58 matches
Mail list logo