In reply to Jones Beene's message of Wed, 1 Feb 2012 07:34:59 -0800:
Hi,
[snip]
>Especially since the implication of this is that the "triggering" is via
>resistance heating (what else could it be operating at 24 VDC?) ... and
You need at least 20 V to ionize most atoms to create free electrons w
YW!
-mark
From: David Roberson [mailto:dlrober...@aol.com]
Sent: Wednesday, February 01, 2012 9:23 AM
To: vortex-l@eskimo.com
Subject: Re: [Vo]:Name that tune
Thanks Mark! This is excellent information that I missed since I joined to
group much later.
Dave
-Original Message
Thanks Mark! This is excellent information that I missed since I joined to
group much later.
Dave
-Original Message-
From: Mark Iverson-ZeroPoint
To: vortex-l
Sent: Wed, Feb 1, 2012 4:23 am
Subject: RE: [Vo]:Name that tune
David:
Who knows what Rossi is using for the heating
collective?
Dave
-Original Message-
From: Peter Gluck
To: vortex-l
Sent: Wed, Feb 1, 2012 3:49 am
Subject: Re: [Vo]:Name that tune
You see that they have answered promptly.
Are you contented with the answer?
In my opinion it is not justified and not reasonable to treat these
On Wed, Feb 1, 2012 at 10:34 AM, Jones Beene wrote:
> Correct me if I am wrong, but DGT have never claimed the long runs of Rossi
> where there are 4-6 hours of high heat with no input (other than 50 watts
> RF). Or have they?
To my knowledge, they have never claimed to run at all without input
2012/2/1 Jones Beene
> ... and we have seen indications in other images of the
> purported controller (Arduino box)
>
Cool, so they use Arduino ! an open platform for micro-controller... good
choice.
good tools, open, cheap, multi-source, and enough for the job.
ahh I regret to have a good inte
Especially since the implication of this is that the "triggering" is via
resistance heating (what else could it be operating at 24 VDC?) ... and
consequently the purpose of the variac is to vary the temperature manually
via voltage into an AC/DC converter (diode and filters) instead of
automaticall
On Wed, Feb 1, 2012 at 12:13 AM, Peter Gluck wrote:
> "The question illuminates, not the answer" (Eugene Ionesco)
> Why you are not asking on the DGT forum?
I did and they responded:
"The reactor tested during such shots was equipped with a triggering
mechanism, as it appears in our spec sheet.
: vortex-l@eskimo.com
Subject: Re: [Vo]:Name that tune
Good question Peter. I have asked a number of questions on the DGT forum in
the past but they do not answer consistently. The Vortex has a number of
excellent members with a great deal of knowledge about many subjects. A
question such as the
resented are much more likely to
> fall upon fertile ground here.
>
> Dave
>
>
> -Original Message-
> From: Peter Gluck
> To: vortex-l
> Sent: Wed, Feb 1, 2012 12:19 am
> Subject: Re: [Vo]:Name that tune
>
> "The question illuminates, not the an
to fall
upon fertile ground here.
Dave
-Original Message-
From: Peter Gluck
To: vortex-l
Sent: Wed, Feb 1, 2012 12:19 am
Subject: Re: [Vo]:Name that tune
"The question illuminates, not the answer" (Eugene Ionesco)
Why you are not asking on the DGT forum?
Peter
On Wed, F
large magnetic field or current that flows within the core region?
>
> A lot of questions and few answers. Maybe some of them will cause a light
> to shine within one of our collective minds.
>
> Dave
>
>
> -Original Message-
> From: francis
> To: vorte
Message-
From: francis
To: vortex-l
Sent: Tue, Jan 31, 2012 9:56 pm
Subject: RE: [Vo]:Name that tune
Why does everyone assume the heater elements use DC? A transformer would be the
easiest way to adjust the voltage or current to larger rms values and would
explain the isolation transformer
Why does everyone assume the heater elements use DC? A transformer would be
the easiest way to adjust the voltage or current to larger rms values and
would explain the isolation transformer. The blue control box then might
simply gate this AC power through the transformer for longer or shorter
dura
On Tue, Jan 31, 2012 at 6:08 PM, Jones Beene wrote:
> Mine too, and now ... the real reason for this inquiry - why do you need
> one?
You normally use an isolation transformer to avoid earthing the load.
That way you avoid ground loops.
Why they use it could be as you surmise; but, variacs are f
Mine too, and now ... the real reason for this inquiry - why do you need
one?
Coincidentally, as you mentioned in the preceding message, they claim NOT to
use an RFG.
Which technically does not mean they do not have a fair amount of RF noise
in the reactor, does it? It means only that they have
On Tue, Jan 31, 2012 at 3:59 PM, Jones Beene wrote:
> At 1:23 in the DGT video - there is seen a blue and yellow block on the
> floor with wires going to the variac. What is it?
An isolation (1:1) transformer is my guess.
T
17 matches
Mail list logo
