Hi Dave,
I think it was Ken Felix that mentioned using different metrics to get
similar functionalty to xorp's qualified-next-hop feature. I'll verify
that when I get in the office tomorrow.
stig
> Hi Stig,
>
> What i was looking for was "next-hop & qualified-next-hop".
> next-hop being the 10
Hi Stig,
What i was looking for was "next-hop & qualified-next-hop".
next-hop being the 10.10.1.2
and
qualified-next-hop being 10.10.2.2
This actually works really well.
- Dave
___
Vyatta-users mailing list
Vyatta-users@mailman.vyatta.com
http://mailm
I actually couldn't figure how to get the firewall made in vyatta...
I ended up just making an rc script to build iptables on startup. :D
Nate
I'll give this a try and let you know. If I can get it working I'll
write up a howto.
On Tue, 2008-02-05 at 08:05 -0800, Justin Fletcher wrote:
> Sure -
I agree, but with our solution, IP addressing is coming from WSP
dynamically. so the use of aggressive mode is needed.
-Carlos
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of ken Felix
Sent: Tuesday, February 05, 2008 11:39 AM
To: vyatta-users@mailman.vya
> Hi,
>
> Is there a way in vyatta to do backup routes like:
>
> route 10.10.33.0/24 to 10.10.1.2 via eth1
>
> BUT if eth1 is not up (because say that switch died).
>
> route 10.10.33.0/24 to 10.10.2.2 via eth2
That should work. Also, with the Glendale release we support ECMP, so you
can also
> Thanks for your quick reply. I am agreed that we can test the
> multiple WAN load balancing feature before it is released to
> help with your testing. But one thing I forgot to mention
> about the broadband connection, is that it has a maximum data
> transfer of 20GB per month.
> That is why
Adjust the metric for the static routes
i.e
set protocols static route10.10.33.0/24 metric 10 next-hop
eth2-address
___
Vyatta-users mailing list
Vyatta-users@mailman.vyatta.com
http://mailman.vyatta.com/mailman/listinfo/vyatta-users
I have to check, but I think in my previous experience with strongswan
and linux, the auto=ignore is what I've used in the past to make the
ipsec client sit as receiver.
Aggressive mode iirc is not what it seems like, but a way that the P1
is established and how many steps are taken in doin
You will need at least 2 vlans created ( vlan 20 & 30 ). Not sure on
how a d-link work but a cisco would be something like this;
config t
!
!
vlan 20
name net20
!
vlan 30
name net30
!
!
interface fas 0/1
switchport trunk allowed vlan 1,20,30
switchport mode trunk
!
write mem
I'm ass
Let me add in, that I'm using aggressive mode. The initiating stations
are dynamic. Will this change your answer?
-Carlos
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of ken Felix
Sent: Monday, February 04, 2008 7:32 PM
To: vyatta-users@mailman.vyatta.com
Hi,
Is there a way in vyatta to do backup routes like:
route 10.10.33.0/24 to 10.10.1.2 via eth1
BUT if eth1 is not up (because say that switch died).
route 10.10.33.0/24 to 10.10.2.2 via eth2
- Dave
___
Vyatta-users mailing list
Vyatta-users@mailma
Can someone help with with this, I have a switch withvLAN enabled from
D-link DES-1226.
I have my eth0 as 192.168.10.45
eth1 >> 192.168.1.1
eth1.20>> 192.168.20.1
eth1.30>> 192.168.30.1
Now i want to access these 2 vLANs, what settings do i need to make
12 matches
Mail list logo
