I have another question. Is it possible that the entire database can now be run
once in order to have the hours of sun generated by the past? The graphics are
not up to date right now because the 5min sun was displayed as 0.8 before
renewal.
Am Freitag, 27. März 2020 13:17:34 UTC+1
Great. That’s it. thank you very much
Am Freitag, 27. März 2020 13:17:34 UTC+1 schrieb Jacques Terrettaz:
>
> May be :
>
> #set minutes = int($day.sunshine_hours.sum.raw - ($hours*60))
>
>
>
> Le vendredi 27 mars 2020 13:14:05 UTC+1, Meteo Oberwallis a écrit :
>>
>> Hello.
>>
>> Thx. Thats Work!
May be :
#set minutes = int($day.sunshine_hours.sum.raw - ($hours*60))
Le vendredi 27 mars 2020 13:14:05 UTC+1, Meteo Oberwallis a écrit :
>
> Hello.
>
> Thx. Thats Work! I have another Problem.
>
> A coming point now appears at the minutes, which should not be there. How can
> I remove it?
Hello.
Thx. Thats Work! I have another Problem.
A coming point now appears at the minutes, which should not be there. How can I
remove it?
Thank you
Am Freitag, 27. März 2020 12:49:17 UTC+1 schrieb Jacques Terrettaz:
>
>
> Hi,
> With this extension, the sunshine time is recorded as
Hi,
Another way to go, if you want to have the sunshine time recorded as hours,
is to mofify the end of the extension to divide it by 60, as follows :
if mesure > seuil:
event.record['sunshine_time'] = event.record['interval']/60
--
You received this message because
Hi,
With this extension, the sunshine time is recorded as minutes.
So in your case, to have the number of hours, you should divide the sum by
60:
#set hours = int($day.sunshine_hours.sum.raw*/60*)
#set minutes = $day.sunshine_hours.sum.raw - ($hours*60)
With a daily sum of 135 minutes
Hi there.
I have recently taken the template for the hours of sunshine from the example
under. Now I have noticed that my sunshine time in the xml is no longer
correct. I think it's because of the conversion?
The Result:
The Code:
#set hours
Hello everbody
Unfortunately I haven't been able to solve the problem yet. I still have the
problem that I want to include the sunshine time in my solar graphics. The
value 0.08 is always given instead of 5min. How can you adjust that?
Am Mittwoch, 1. Januar 2020 13:22:36 UTC+1 schrieb Meteo
I have a question about how to log the sunshine hours.
I thought to log "1" for every minute the radiation is above 75% expected
maximum radiation and 0 when it is below. When I do a daily sum of this
parameter, I'd get a number of sunshine minutes for a day.
I chose to log these "sunny
Hello everybody
I have a question about graphic design. I would like to include the sunshine
time in the graphics. Currently the value of 0.08 in sunshine always appears
there. This is my current code in use.
[[chart6]]
title = Sonnenschein
# Make sure the y-axis increment is
I agree with peter's comment.
The Davis solar radiation sensor, or any comparable sensor, is measuring a
global radiation ( direct + diffuse) and the surface of the sensor is
parallel to the ground. A fixed threshold, such as 120 W/m2, can be used
only with sensors measuring direct radiation
I admit I don't follow the discussion frequently. I was thinking about the
sunshine hours log - from the posts I understand the interval is considered
"sunny" if the solar radiation is above a fixed threshold (e.g. 120 W/m2).
I have second thoughts. For one of my stations I use Weather Display
Hello Andrew.
Yes.Thats it. Thank you very Much. It works!
Thanks
Stefan
Am Mittwoch, 16. Oktober 2019 15:08:35 UTC+2 schrieb Andrew Milner:
>
> check your file - it looks as though there is now a 'stray' letter v in
> the file as a result of your editing!! A typo of somekind clearly!!
>
>
>
check your file - it looks as though there is now a 'stray' letter v in the
file as a result of your editing!! A typo of somekind clearly!!
On Wednesday, 16 October 2019 14:57:33 UTC+3, Stefan wrote:
>
> Thx Gary.
> I made the change. However, it does not work either. There is still the
>
Thx Gary.
I made the change. However, it does not work either. There is still the
error message:
Oct 16 13:54:28 raspberrypi weewx[12153]: engine: Caught unrecoverable
exception in engine:
Oct 16 13:54:28 raspberrypi weewx[12153]: name 'v' is not defined
Oct 16 13:54:28 raspberrypi
OK, essentially the same file but double spaced. The problem looks like it
is due to field radiation being either missing or None. Try changing the
following line:
syslog.syslog(syslog.LOG_DEBUG, "Calculated sunshine_hours = %f, based on
radiation = %f, and min_sunshine = %f" %
to
Hello Gray.
Here is the Script. Thx for Help.
Am Mittwoch, 16. Oktober 2019 07:47:43 UTC+2 schrieb gjr80:
>
> Chances are field radiation does not exist in an archive record or it is
> set to None. I am afraid if you want any further help you are going to have
> to post the copy of
Chances are field radiation does not exist in an archive record or it is
set to None. I am afraid if you want any further help you are going to have
to post the copy of radiationhours.py that you are using; the version in
the repo you linked only has 106 lines of code and the error trace you
Hello.
The problem has reappeared today. Weewx stops the work. I have not changed
the script, not adjusted to the threshold. This is still on 120W min. It
ran until this morning without problems. But again this error message.
Oct 16 07:22:48 raspberrypi weewx[14709]: engine: Caught
If you must modify the code then yes that will do what you want provided there
is no min_sunshine setting in weewx.conf.
Gary
--
You received this message because you are subscribed to the Google Groups
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send
OK thanks. But if I change the value in radiationshours.py, would that work
out well? Replace the yellow marked value with 200?
import weewx
from weewx.wxengine import StdService
class RadiationHours(StdService):
def __init__(self, engine, config_dict):
# Pass the initialization information
The single [ ] tell you it needs to be its own top level stanza. Easiest thing
is to put it at the end of the file.
Gary
--
You received this message because you are subscribed to the Google Groups
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an
Hello Gary.
No I did not write anything to the weewx.conf. Where should I insert this? So
under what class?
Am Samstag, 12. Oktober 2019 10:54:08 UTC+2 schrieb gjr80:
>
> So did you put the following in weewx.conf:
>
> [Radiation Days]
> min_sunshine = 200
>
> then save weewx.conf and
So did you put the following in weewx.conf:
[Radiation Days]
min_sunshine = 200
then save weewx.conf and restart WeeWX? Why do you think it is not working? The
author gives you a means to set the threshold value in weewx.conf rather than
modifying code. Try setting debug = 1 and see what
Hello
I have a question. The documentation says, you can change the threshold of
120 in the weewx.conf. However, I do not find the weewx.conf this described
point. 120 are too few. I want to set the value to 200. If I change this in
the radiationshours.py, then I get, as soon as the solar
25 matches
Mail list logo