Does anyone know how to default an AN80i Redline? Joe Laura
- Original Message -
WISPA Wants You! Join today!
http://signup.wispa.org/
For some reason I can not get to the radio with its current IP. It links up
fine with the switch. TIA
- Original Message -
From: "Joe Laura"
To: "WISPA General List"
Sent: Sunday, July 26, 2009 9:09 PM
Subject: Re: [WISPA] Default a AN80i?
> Does anyone know how to default an AN80i Red
http://supportcenteronline.com/ics/support/KBAnswer.asp?questionID=377&fieldOffset=14&hitOffset=709+20+
Joe Laura wrote:
> Does anyone know how to default an AN80i Redline? Joe Laura
> - Original Message -
>
>
> -
Couldnt get to that link. Says Your support portal session has expired
- Original Message -
From: "Eric Muehleisen"
To: "WISPA General List"
Sent: Sunday, July 26, 2009 9:17 PM
Subject: Re: [WISPA] Default a AN80i?
>
http://supportcenteronline.com/ics/support/KBAnswer.asp?questionID=37
Sorry,
1. Power-off the AN-80i PoE power adapter. Remove the network Ethernet
cable and connect your computer directly to the PoE power adapter
'INPUT' (Ethernet port requires Cat 5e cross-over cable).
2. Open a command prompt window on the PC and enter the command:
telnet 192.168.25.2
Wow, Thanks! I cant thank you enough! Joe
WISPA Wants You! Join today!
http://signup.wispa.org/
WISPA Wireless List: wireless@wispa.o
It's gems like these that make this list such a treasure. Good job! -- Mike
At 09:29 PM 7/26/2009, you wrote:
>Sorry,
>
>1. Power-off the AN-80i PoE power adapter. Remove the network Ethernet
>cable and connect your computer directly to the PoE power adapter
>'INPUT' (Ethernet port requires Cat
Wow really? That seems awfully tempermental and difficult to time...
So after you reboot it twice, I expect (hope) that after 15-30 seconds
it goes back to using the stored config?
On 7/26/09, Eric Muehleisen wrote:
> Sorry,
>
> 1. Power-off the AN-80i PoE power adapter. Remove the network Ethe
Joe,
If you wouldn't mind please share how easy/difficult this is. For me it
seems like a pain due to timing but I would trust your word much more then
my imagination!
Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373
"When you have eliminated the im
Tried three times so far. No luck. Still trying
- Original Message -
From: "Josh Luthman"
To: "WISPA General List"
Sent: Sunday, July 26, 2009 9:44 PM
Subject: Re: [WISPA] Default a AN80i?
> Joe,
>
> If you wouldn't mind please share how easy/difficult this is. For me it
> seems like
Well if he can't do it I'm boned...
Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373
"When you have eliminated the impossible, that which remains, however
improbable, must be the truth."
--- Sir Arthur Conan Doyle
On Sun, Jul 26, 2009 at 10:53 PM, J
I have a tech on his cell at the site. So timeing isnt a issue. It could
possibly be the radio is messed up worse than I thought. It links up to the
switch just fine. I couldnt get to it remotly earlier so hoped it just lost
its config somehow.
- Original Message -
From: "Josh Luthman"
To
Man that sucks :(
On 7/26/09, Joe Laura wrote:
> I have a tech on his cell at the site. So timeing isnt a issue. It could
> possibly be the radio is messed up worse than I thought. It links up to the
> switch just fine. I couldnt get to it remotly earlier so hoped it just lost
> its config someho
It does but at least I know where I am at now. Its a backhaul to only one
client. I got his T1 backup running so he is ok till I overnight a radio for
him. Thanks for the help. Joe Laura
- Original Message -
From: "Josh Luthman"
To: "WISPA General List"
Sent: Sunday, July 26, 2009 10:31
Have you seen these?
http://rfantennadesign.com/page35.html
6-8dB sure isn't much.
WISPA Wants You! Join today!
http://signup.wispa.org/
---
15 matches
Mail list logo
