PC Tel (Maxrad) makes very good antennas and they stand behind them. I have
sold them to many clients with very few issues ever. The Laird (Pac Wireless)
products also seem to have a very low complaint rate. Please note this is the
opinion of a supplier not an installer but, I do hear from a
If you keep the signal levels up, so that the data rates stay up (all stay
above -73), you can move about 6-8 mbit in a 5 mhz channel at 900.
I've been using UBNT radios and star-os to drive them. 900 mhz is VERY
prone to interference, the RSSI levels are hugely affected by weather,
MTI is damn good quality.
-
Mike Hammett
Intelligent Computing Solutions
http://www.ics-il.com
On 4/29/2010 8:17 PM, Robert West wrote:
I hear ya. I will gladly pay extra now to not have to go back over and
over. Pays 10X in the long run.
I prefer goo quality. :)
I'll give it a
I've been looking at them and reading and it's all good. Looks like the
ca$h is well worth it. Hurts, but still seems to be money well spent.
UBNT tells me august for 900MHz sectors and rockets..
Bob-
- Original Message -
From: Mike Hammett wispawirel...@ics-il.net
To:
Oh, hell yes, my brother!
- Original Message -
From: Josh Luthman j...@imaginenetworksllc.com
To: WISPA General List wireless@wispa.org
Sent: Thursday, May 06, 2010 11:23 PM
Subject: Re: [WISPA] Looking for iput on 900MHz H-Pol Sector Choices.
Nothealthcare, taxes or government
I'd argue that the Yagis would not have a narrow enough verticle beamwidth,
and Downtilt would be hard to get right, and/or to much energy wasted
getting directed in the wrong verticle directions, thus being less efficent
than a panel. But I guess it would depend on the needs of where
Note... Teletronics also makes/carries a Horizontal 900Mhz 120deg sector,
priced competitively. We were in a crunch for antennas quickly, so since
Teletronics was local to us, we gave them a try (instead of waiting for
Tilteks). After all was said and done, the Teletronic antennas actually
I looked at what was out there, and decided that most were too expensive and
worse... Too large for some sites.
I've used the little yagi's as sectors and really, for a cheap site, or a
site you can't install the big antennas, they work reasonably well.Not
very good front / back ratio,
UBNT works on the Julian calendar.
It's not their fault that you don't know how to convert.
LOL!
Thanks a bunch. I heard something aout them doing 900 sectors but nothing
solid. Might be worth the wait. Like till 2013?
Bob-
- Original Message -
From: Jason Bailey
I hear ya. I will gladly pay extra now to not have to go back over and
over. Pays 10X in the long run.
I prefer goo quality. :)
I'll give it a look to be sure.
Bob-
- Original Message -
From: Jeremie Chism jchi...@gmail.com
To: WISPA General List wireless@wispa.org
Sent: Thursday,
I've had suggestions of MTI's. They are very expensive anywhere, I
believe. I absolutely love MTI's 5Ghz sector and 900 omni (though it's
super super super super super heavy).
Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373
“Success is not final,
Agreed. But I prefer the julian calender explaination.
It's more confusing.
- Original Message -
From: Michael Baird m...@tc3net.com
To: WISPA General List wireless@wispa.org
Sent: Thursday, April 29, 2010 9:22 PM
Subject: Re: [WISPA] Looking for iput on 900MHz H-Pol Sector Choices.
I have been waiting to see this discussionso I started it! I know the
schedule and I'm anxious to see it.It will come,and when it does it will shake
the market up!IMHO we need that!.Jason For now,MTI expensive..GET
what you pay for.
--- On Thu, 4/29/10, Michael Baird
Maybe.
- Original Message -
From: RickG rgunder...@gmail.com
To: WISPA General List wireless@wispa.org
Sent: Thursday, April 29, 2010 9:21 PM
Subject: Re: [WISPA] Looking for iput on 900MHz H-Pol Sector Choices.
Nothealthcare, taxes or government related.
Hey!
To start out with, I have heard nothing but bad news about Super Pass. I have
never used them, so I am NOT speaking from experience. I am also a 80% or more
Canopy shop...so take that as you will. For Canopy, I have used 120 degree
H-pol Tiltek sectors...they work !@@@!...@!@ great! But they
15 matches
Mail list logo