Erik Trimble erik.trim...@oracle.com writes:
Do you think it would be a problem having a second sata card in a PCI
slot? That would be 8 sata ports in all, since the A-open AK86
motherboard has 2 built in. Or should I swap out the 2prt for the 4
prt. I really only need 2 more prts
- Harry Putnam rea...@newsguy.com skrev:
Erik Trimble erik.trim...@oracle.com writes:
Do you think it would be a problem having a second sata card in a
PCI
slot? That would be 8 sata ports in all, since the A-open AK86
motherboard has 2 built in. Or should I swap out the 2prt for
Harry Putnam wrote:
Erik Trimble erik.trim...@oracle.com writes:
Do you think it would be a problem having a second sata card in a PCI
slot? That would be 8 sata ports in all, since the A-open AK86
motherboard has 2 built in. Or should I swap out the 2prt for the 4
prt. I really only
On Monday, April 19, 2010, Roy Sigurd Karlsbakk r...@karlsbakk.net wrote:
- Harry Putnam rea...@newsguy.com skrev:
Erik Trimble erik.trim...@oracle.com writes:
Do you think it would be a problem having a second sata card in a
PCI
slot? That would be 8 sata ports in all, since the
Erik Trimble erik.trim...@oracle.com writes:
Since we're talking about an old PCI slot here, I'd say there's really
two good options:
A SiliconImage Sil3114-based card, which is a 32-bit/66Mhz card, with
4 SATA-1 ports, usually for $25
A Supermicro AOC-SAT2-MV8 card, which is a
Harry Putnam wrote:
Erik Trimble erik.trim...@oracle.com writes:
Bottom line: if you can live without true hot-swap capability
(i.e. shutdown the machine to change a drive), then save yourself $75
and go with 2 3114 cards.
That sounds like it would do all I need. I currently have
Tim Cook t...@cook.ms writes:
On Fri, Apr 16, 2010 at 7:35 PM, Harry Putnam rea...@newsguy.com wrote:
Eric D. Mudama edmud...@bounceswoosh.org writes:
On Thu, Apr 15 at 23:57, Günther wrote:
hello
if you are looking for pci-e (8x), i would recommend sas/sata controller
with lsi 1068E
On Sat, Apr 17, 2010 at 2:12 PM, Harry Putnam rea...@newsguy.com wrote:
Tim Cook t...@cook.ms writes:
On Fri, Apr 16, 2010 at 7:35 PM, Harry Putnam rea...@newsguy.com
wrote:
Eric D. Mudama edmud...@bounceswoosh.org writes:
On Thu, Apr 15 at 23:57, Günther wrote:
hello
if you
On Sat, Apr 17, 2010 at 15:19, Tim Cook t...@cook.ms wrote:
On Sat, Apr 17, 2010 at 2:12 PM, Harry Putnam rea...@newsguy.com wrote:
Tim Cook t...@cook.ms writes:
On Fri, Apr 16, 2010 at 7:35 PM, Harry Putnam rea...@newsguy.com
wrote:
Eric D. Mudama edmud...@bounceswoosh.org writes:
On Sat, Apr 17, 2010 at 05:36:19PM -0400, Ethan wrote:
From wikipedia, PCI is
133 MB http://en.wikipedia.org/wiki/Megabyte/s (32-bit at 33 MHz)
266 MB/s (32-bit at 66 MHz or 64-bit at 33 MHz)
533 MB/s (64-bit at 66 MHz)
Not quite the 3GB/s hoped for.
Not quite, but somewhat closer to the
Since we're talking about an old PCI slot here, I'd say there's really
two good options:
A SiliconImage Sil3114-based card, which is a 32-bit/66Mhz card, with 4
SATA-1 ports, usually for $25
A Supermicro AOC-SAT2-MV8 card, which is a 64-bit/100Mhz PCI-X card (but
will fit and run just fine
On Fri, Apr 16, 2010 at 12:21 AM, george b...@otenet.gr wrote:
hi all
im brand new to opensolaris ... feel free to call me noob :)
i need to build a home server for media and general storage
zfs sound like the perfect solution
but i need to buy a 8 (or more) SATA controller
any
hello
if you are looking for pci-e (8x), i would recommend sas/sata controller
with lsi 1068E sas chip. they are nearly perfect with opensolaris.
you must look for controller with it firmware (jbod mode) not
those with raid enabled (ir mode). normally the cheaper
variants are the right ones.
On Fri, Apr 16, 2010 at 1:57 AM, Günther a...@hfg-gmuend.de wrote:
hello
if you are looking for pci-e (8x), i would recommend sas/sata controller
with lsi 1068E sas chip. they are nearly perfect with opensolaris.
you must look for controller with it firmware (jbod mode) not
those with
On Thu, Apr 15 at 23:57, Günther wrote:
hello
if you are looking for pci-e (8x), i would recommend sas/sata controller
with lsi 1068E sas chip. they are nearly perfect with opensolaris.
For just a bit more, you can get the LSI SAS 9211-9i card which is
6Gbit/s. It works fine for us, and
Eric D. Mudama edmud...@bounceswoosh.org writes:
On Thu, Apr 15 at 23:57, Günther wrote:
hello
if you are looking for pci-e (8x), i would recommend sas/sata controller
with lsi 1068E sas chip. they are nearly perfect with opensolaris.
For just a bit more, you can get the LSI SAS 9211-9i card
On Fri, Apr 16, 2010 at 7:35 PM, Harry Putnam rea...@newsguy.com wrote:
Eric D. Mudama edmud...@bounceswoosh.org writes:
On Thu, Apr 15 at 23:57, Günther wrote:
hello
if you are looking for pci-e (8x), i would recommend sas/sata controller
with lsi 1068E sas chip. they are nearly
hi all
im brand new to opensolaris ... feel free to call me noob :)
i need to build a home server for media and general storage
zfs sound like the perfect solution
but i need to buy a 8 (or more) SATA controller
any suggestions for compatible 2 opensolaris products will be really
18 matches
Mail list logo
