Re: [Fwd: VM/VCB Help needed]
Yes, I'm using TSM Client 5.5.1.4 for VM/VCB backup. I'm using a script on one of the ESX servers to backup all VM's in the cluster (the ESX server is talking to the VC server). Met vriendelijke groet, Richard van Denzel +31 (0) 6 15 83 82 48 -Original Message- From: ADSM: Dist Stor Manager [mailto:ads...@vm.marist.edu] On Behalf Of Timothy Hughes Sent: woensdag 28 oktober 2009 18:59 To: ADSM-L@VM.MARIST.EDU Subject: [ADSM-L] [Fwd: VM/VCB Help needed] Is anyone using the Tivoli Client 5.5 for backup with VM/VCB? Original Message Subject:VM/VCB Help needed Date: Mon, 05 Oct 2009 11:21:16 -0400 From: Timothy Hughes timothy.hug...@oit.state.nj.us To: ADSM: Dist Stor Manager ADSM-L@VM.MARIST.EDU Hello, I am also working with VM/VCB for the first time Can anyone help with the following steps? they need to be performed to prepare to backup and restore VMs using the VCB server: Set up TSM scheduling to automate the backup/restore process of VM files and full VM images. Scripting in TSM to include flat file backups so that TSM clients can eventually be removed off of the VMs. (any example of what the script would look like) Any, Comments, Help, Suggestions or/and examples are welcome. Thanks in advance Virtual Machines - sni400- Windows tivoli client 5.4.0.2 ; sni409 - Windows tivoli client 5.3.5 sni 410- Windows tivoli client 5.3.5 Virtual center server (sni367) has Windows 5.5.2 client TSM Server 5.3 AIX 6.1
[Fwd: VM/VCB Help needed]
Is anyone using the Tivoli Client 5.5 for backup with VM/VCB? Original Message Subject:VM/VCB Help needed Date: Mon, 05 Oct 2009 11:21:16 -0400 From: Timothy Hughes timothy.hug...@oit.state.nj.us To: ADSM: Dist Stor Manager ADSM-L@VM.MARIST.EDU Hello, I am also working with VM/VCB for the first time Can anyone help with the following steps? they need to be performed to prepare to backup and restore VMs using the VCB server: Set up TSM scheduling to automate the backup/restore process of VM files and full VM images. Scripting in TSM to include flat file backups so that TSM clients can eventually be removed off of the VMs. (any example of what the script would look like) Any, Comments, Help, Suggestions or/and examples are welcome. Thanks in advance Virtual Machines - sni400- Windows tivoli client 5.4.0.2 ; sni409 - Windows tivoli client 5.3.5 sni 410- Windows tivoli client 5.3.5 Virtual center server (sni367) has Windows 5.5.2 client TSM Server 5.3 AIX 6.1
VM/VCB Help needed
Hello, I am also working with VM/VCB for the first time Can anyone help with the following steps? they need to be performed to prepare to backup and restore VMs using the VCB server: Set up TSM scheduling to automate the backup/restore process of VM files and full VM images. Scripting in TSM to include flat file backups so that TSM clients can eventually be removed off of the VMs. (any example of what the script would look like) Any, Comments, Help, Suggestions or/and examples are welcome. Thanks in advance Virtual Machines - sni400- Windows tivoli client 5.4.0.2 ; sni409 - Windows tivoli client 5.3.5 sni 410- Windows tivoli client 5.3.5 Virtual center server (sni367) has Windows 5.5.2 client TSM Server 5.3 AIX 6.1
Re: VM/VCB Help needed
Hi, get either the TSM 6.1 client or the STORServer VCB agent, each one will make your life a lot easier. On 5 okt 2009, at 17:21, Timothy Hughes wrote: Hello, I am also working with VM/VCB for the first time Can anyone help with the following steps? they need to be performed to prepare to backup and restore VMs using the VCB server: Set up TSM scheduling to automate the backup/restore process of VM files and full VM images. Scripting in TSM to include flat file backups so that TSM clients can eventually be removed off of the VMs. (any example of what the script would look like) Any, Comments, Help, Suggestions or/and examples are welcome. Thanks in advance Virtual Machines - sni400- Windows tivoli client 5.4.0.2 ; sni409 - Windows tivoli client 5.3.5 sni 410- Windows tivoli client 5.3.5 Virtual center server (sni367) has Windows 5.5.2 client TSM Server 5.3 AIX 6.1 -- Met vriendelijke groeten, Remco Post r.p...@plcs.nl +31 6 248 21 622
Re: VM/VCB Help needed
Hi RemcoThanks The VM machines are Windows 2000 Can the TSM 6.1 client be installed? I checked but it doesn't appear so The proxy server and the Virtual Center Server are windows 2003 they have the Tivoli 5.5.2 client installed. Would the TSM 6.1 Client have to be installed on all the servers involved? regards Remco Post wrote: Hi, get either the TSM 6.1 client or the STORServer VCB agent, each one will make your life a lot easier. On 5 okt 2009, at 17:21, Timothy Hughes wrote: Hello, I am also working with VM/VCB for the first time Can anyone help with the following steps? they need to be performed to prepare to backup and restore VMs using the VCB server: Set up TSM scheduling to automate the backup/restore process of VM files and full VM images. Scripting in TSM to include flat file backups so that TSM clients can eventually be removed off of the VMs. (any example of what the script would look like) Any, Comments, Help, Suggestions or/and examples are welcome. Thanks in advance Virtual Machines - sni400- Windows tivoli client 5.4.0.2 ; sni409 - Windows tivoli client 5.3.5 sni 410- Windows tivoli client 5.3.5 Virtual center server (sni367) has Windows 5.5.2 client TSM Server 5.3 AIX 6.1 -- Met vriendelijke groeten, Remco Post r.p...@plcs.nl +31 6 248 21 622
Re: VM/VCB Help needed
On 5 okt 2009, at 19:59, Timothy Hughes wrote: Hi RemcoThanks The VM machines are Windows 2000 Can the TSM 6.1 client be installed? I checked but it doesn't appear so The proxy server and the Virtual Center Server are windows 2003 they have the Tivoli 5.5.2 client installed. Would the TSM 6.1 Client have to be installed on all the servers involved? the essence of vcb is that you only need a client on the proxy for making backups, for restores you might need a client on the target vm, though I'm still not convinced that you need that in all cases. (windows shares can be used as a restore target from the proxy, assuming network policies allow you to map the target disk on the proxy etc...). Of course, win2k being what it is, you just might have found another reason to dump it. Retoring data with any down-level client might be a challenge even with the restore client being at 5.3 and the proxy at 5.5... regards Remco Post wrote: Hi, get either the TSM 6.1 client or the STORServer VCB agent, each one will make your life a lot easier. On 5 okt 2009, at 17:21, Timothy Hughes wrote: Hello, I am also working with VM/VCB for the first time Can anyone help with the following steps? they need to be performed to prepare to backup and restore VMs using the VCB server: Set up TSM scheduling to automate the backup/restore process of VM files and full VM images. Scripting in TSM to include flat file backups so that TSM clients can eventually be removed off of the VMs. (any example of what the script would look like) Any, Comments, Help, Suggestions or/and examples are welcome. Thanks in advance Virtual Machines - sni400- Windows tivoli client 5.4.0.2 ; sni409 - Windows tivoli client 5.3.5 sni 410- Windows tivoli client 5.3.5 Virtual center server (sni367) has Windows 5.5.2 client TSM Server 5.3 AIX 6.1 -- Met vriendelijke groeten, Remco Post r.p...@plcs.nl +31 6 248 21 622 -- Met vriendelijke groeten, Remco Post r.p...@plcs.nl +31 6 248 21 622
TSM server help needed
Hi folks, I have a tsm server running on Linux on System z that has 5 tape drives allocated. My backuppool migrates to tapepool and I have the backuppool set to 5 migration processes. Although 5 are running, only one tape drive is being used (2 just went offline for some reason???), so backuppool keeps filling up. q dr ANR2017I Administrator SERVER_CONSOLE issued command: QUERY DRIVE Library Name Drive Name Device Type On-Line --- --- L3584DRIVE0 LTO Yes L3584DRIVE1 LTO Yes L3584DRIVE2 LTO Yes L3584DRIVE3 LTO Yes L3584DRIVE4 LTO Unavailable Since 08/01/2009 12:04:17 AM L3584DRIVE5 LTO Unavailable Since 08/02/2009 05:36:53 AM ANR2017I Administrator SERVER_CONSOLE issued command: QUERY STGPOOL backuppool f=d Storage Pool Name: BACKUPPOOL Storage Pool Type: Primary Device Class Name: DISK Estimated Capacity: 1,127 G Space Trigger Util: 99.4 Pct Util: 99.4 Pct Migr: 99.2 Pct Logical: 100.0 High Mig Pct: 50 Low Mig Pct: 30 Migration Delay: 0 Migration Continue: Yes Migration Processes: 5 Reclamation Processes: Next Storage Pool: TAPEPOOL Reclaim Storage Pool: Maximum Size Threshold: No Limit Access: Read/Write Description: Overflow Location: Cache Migrated Files?: No Collocate?: Reclamation Threshold: Offsite Reclamation Limit: Maximum Scratch Volumes Allowed: Number of Scratch Volumes Used: Delay Period for Volume Reuse: Migration in Progress?: Yes Amount Migrated (MB): 262,678.07 Elapsed Migration Time (seconds): 12,375 Reclamation in Progress?: Last Update by (administrator): SERVER_CONSOLE Last Update Date/Time: 07/31/2009 07:56:58 PM Storage Pool Data Format: Native Copy Storage Pool(s): Active Data Pool(s): Continue Copy on Error?: Yes CRC Data: No Reclamation Type: Overwrite Data when Deleted: Anyone with tsm server experience that can help me out would be greatly appreciatedl!! Lori G. Customer Liaison - Linux on System z Team VM Services Delivery - Information Technology Services Americas, Global Services leter...@us.ibm.com Linux Information? See http://w3vmlinux.pok.ibm.com Linux Requests? Visit our new workload management tool at: http://linuxonz.pok.ibm.com/service/request You only live once-but if you work it right, once is enough.
Re: TSM server help needed
What does 'q path' say? -- Warm regards, Michael Green On Mon, Aug 3, 2009 at 4:12 PM, Lori Grimaldileter...@us.ibm.com wrote: Hi folks, I have a tsm server running on Linux on System z that has 5 tape drives allocated. My backuppool migrates to tapepool and I have the backuppool set to 5 migration processes. Although 5 are running, only one tape drive is being used (2 just went offline for some reason???), so backuppool keeps filling up. q dr ANR2017I Administrator SERVER_CONSOLE issued command: QUERY DRIVE Library Name Drive Name Device Type On-Line --- --- L3584 DRIVE0 LTO Yes L3584 DRIVE1 LTO Yes L3584 DRIVE2 LTO Yes L3584 DRIVE3 LTO Yes L3584 DRIVE4 LTO Unavailable Since 08/01/2009 12:04:17 AM L3584 DRIVE5 LTO Unavailable Since 08/02/2009 05:36:53 AM ANR2017I Administrator SERVER_CONSOLE issued command: QUERY STGPOOL backuppool f=d Storage Pool Name: BACKUPPOOL Storage Pool Type: Primary Device Class Name: DISK Estimated Capacity: 1,127 G Space Trigger Util: 99.4 Pct Util: 99.4 Pct Migr: 99.2 Pct Logical: 100.0 High Mig Pct: 50 Low Mig Pct: 30 Migration Delay: 0 Migration Continue: Yes Migration Processes: 5 Reclamation Processes: Next Storage Pool: TAPEPOOL Reclaim Storage Pool: Maximum Size Threshold: No Limit Access: Read/Write Description: Overflow Location: Cache Migrated Files?: No Collocate?: Reclamation Threshold: Offsite Reclamation Limit: Maximum Scratch Volumes Allowed: Number of Scratch Volumes Used: Delay Period for Volume Reuse: Migration in Progress?: Yes Amount Migrated (MB): 262,678.07 Elapsed Migration Time (seconds): 12,375 Reclamation in Progress?: Last Update by (administrator): SERVER_CONSOLE Last Update Date/Time: 07/31/2009 07:56:58 PM Storage Pool Data Format: Native Copy Storage Pool(s): Active Data Pool(s): Continue Copy on Error?: Yes CRC Data: No Reclamation Type: Overwrite Data when Deleted: Anyone with tsm server experience that can help me out would be greatly appreciatedl!! Lori G. Customer Liaison - Linux on System z Team VM Services Delivery - Information Technology Services Americas, Global Services leter...@us.ibm.com Linux Information? See http://w3vmlinux.pok.ibm.com Linux Requests? Visit our new workload management tool at: http://linuxonz.pok.ibm.com/service/request You only live once-but if you work it right, once is enough.
Re: TSM server help needed
Also, q vol stg=backuppool q vol stg=tapepool q vol acc=reado q vol acc=unav -- Warm regards, Michael Green
Re: TSM server help needed
Lori, You could be having connectivity issues with your drives. On this post, you stated 2 drives went offline, on the most recent, there were 3 drives offline. First, check for any defective cabling on the tape drives. If the first step doesn't lead any conclusive results, you can make use of the library web interface; download and review the drive logs under service. If it turns out that the drives themselves are defective though it seems a bit far fetched that you have 3 faulty drives at the same time; then you will need to contact IBM to have those defective drives replaced. Good luck. BERTAUT TCHUISE Storage Support Administrator Legg Mason Technology Services *410-580-7032 btchu...@leggmason.com -Original Message- From: ADSM: Dist Stor Manager [mailto:ads...@vm.marist.edu] On Behalf Of Lori Grimaldi Sent: Monday, August 03, 2009 9:12 AM To: ADSM-L@VM.MARIST.EDU Subject: [ADSM-L] TSM server help needed Hi folks, I have a tsm server running on Linux on System z that has 5 tape drives allocated. My backuppool migrates to tapepool and I have the backuppool set to 5 migration processes. Although 5 are running, only one tape drive is being used (2 just went offline for some reason???), so backuppool keeps filling up. q dr ANR2017I Administrator SERVER_CONSOLE issued command: QUERY DRIVE Library Name Drive Name Device Type On-Line --- --- L3584DRIVE0 LTO Yes L3584DRIVE1 LTO Yes L3584DRIVE2 LTO Yes L3584DRIVE3 LTO Yes L3584DRIVE4 LTO Unavailable Since 08/01/2009 12:04:17 AM L3584DRIVE5 LTO Unavailable Since 08/02/2009 05:36:53 AM ANR2017I Administrator SERVER_CONSOLE issued command: QUERY STGPOOL backuppool f=d Storage Pool Name: BACKUPPOOL Storage Pool Type: Primary Device Class Name: DISK Estimated Capacity: 1,127 G Space Trigger Util: 99.4 Pct Util: 99.4 Pct Migr: 99.2 Pct Logical: 100.0 High Mig Pct: 50 Low Mig Pct: 30 Migration Delay: 0 Migration Continue: Yes Migration Processes: 5 Reclamation Processes: Next Storage Pool: TAPEPOOL Reclaim Storage Pool: Maximum Size Threshold: No Limit Access: Read/Write Description: Overflow Location: Cache Migrated Files?: No Collocate?: Reclamation Threshold: Offsite Reclamation Limit: Maximum Scratch Volumes Allowed: Number of Scratch Volumes Used: Delay Period for Volume Reuse: Migration in Progress?: Yes Amount Migrated (MB): 262,678.07 Elapsed Migration Time (seconds): 12,375 Reclamation in Progress?: Last Update by (administrator): SERVER_CONSOLE Last Update Date/Time: 07/31/2009 07:56:58 PM Storage Pool Data Format: Native Copy Storage Pool(s): Active Data Pool(s): Continue Copy on Error?: Yes CRC Data: No Reclamation Type: Overwrite Data when Deleted: Anyone with tsm server experience that can help me out would be greatly appreciatedl!! Lori G. Customer Liaison - Linux on System z Team VM Services Delivery - Information Technology Services Americas, Global Services leter...@us.ibm.com Linux Information? See http://w3vmlinux.pok.ibm.com Linux Requests? Visit our new workload management tool at: http://linuxonz.pok.ibm.com/service/request You only live once-but if you work it right, once is enough. IMPORTANT: E-mail sent through the Internet is not secure. Legg Mason therefore recommends that you do not send any confidential or sensitive information to us via electronic mail, including social security numbers, account numbers, or personal identification numbers. Delivery, and or timely delivery of Internet mail is not guaranteed. Legg Mason therefore recommends that you do not send time sensitive or action-oriented messages to us via electronic mail. This message is intended for the addressee only and may contain privileged or confidential information. Unless you are the intended recipient, you may not use, copy or disclose to anyone any information contained in this message. If you have received this message in error, please notify the author by replying to this message and then kindly delete the message. Thank you.
Re: Help needed configuring TDP for Exchange2007 with VSS.
Thanks Richard, Del and Steve. We still haven't resolved the problem, and other priorities have taken precedence for the Exchange admins. We think at least part of our problem involves an isolated Exchange test environment trying to communicate with the TSM server on the production network. Thanks again. Larry -Original Message- From: ADSM: Dist Stor Manager [mailto:ads...@vm.marist.edu] On Behalf Of Del Hoobler Sent: Wednesday, February 18, 2009 4:13 PM To: ADSM-L@VM.MARIST.EDU Subject: Re: Help needed configuring TDP for Exchange2007 with VSS. This sounds very close to the: ANS1353E (RC53) Session rejected: Unknown or incorrect ID entered This problem can be caused if the register node was not done correctly. In order for proxy authority to work, you must have as admin node of Client Owner admin privilege for the DP/Exchange node. This is normally done for you automatically when you issue the REGISTER NODE command. However if you used something like: REGISTER NODE nodename password USERID=NONE or if you used the GUI to define the NODE, the admin id may not have been created. To check this... on your TSM Server, issue the QUERY ADMIN command. It should show something like this: tsm: SERVERq admin Administrator Days SinceDays Since Locked?Privilege Classes Name Last Access Password Set -- -- --- CTNHEXMB01A 1 134 No Client Owner CTNHEXMB02A 1 134 No Client Owner EXMB01E 1 134 No Client Owner If this is not the problem, the other thing to verify is that your CAD Service is configured and running. Thanks, Del ADSM: Dist Stor Manager ADSM-L@VM.MARIST.EDU wrote on 02/18/2009 02:39:10 PM: [image removed] Help needed configuring TDP for Exchange2007 with VSS. Mcnutt, Larry E. to: ADSM-L 02/18/2009 02:41 PM Sent by: ADSM: Dist Stor Manager ADSM-L@VM.MARIST.EDU Please respond to ADSM: Dist Stor Manager TSM 5.5.2.0 AIX 5.3 BA client 5.5.1 TDP for Mail 5.5.1 Cluster nodes CTNHEXMB01A and CTNHEXMB02A Exchange client node EXMB01E tsm: FSPHTSM1q proxy target=EXMB01E Target Node Agent Node --- --- EXMB01E CTNHEXMB01A We apparently have some configuration problem. When we try to run a local VSS backup from the agent node(CTNHEXMB01A), it always fails with ANS1033E (RC-53) An invalid TCP/IP address was specified. We have tried looking at all the documentation, with no resolution. I know this is not much information to go on, but I thought maybe this failure points to a specific problem. There is so much configuration information involved, I preferred not to try to show it all, but will provide whatever is needed. I also have a trace if that will help. Thanks, Larry McNutt The Timken Company - This message and any attachments are intended for the individual or entity named above. If you are not the intended recipient, please do not forward, copy, print, use or disclose this communication to others; also please notify the sender by replying to this message, and then delete it from your system. The Timken Company / The Timken Corporation
Help needed configuring TDP for Exchange2007 with VSS.
TSM 5.5.2.0 AIX 5.3 BA client 5.5.1 TDP for Mail 5.5.1 Cluster nodes CTNHEXMB01A and CTNHEXMB02A Exchange client node EXMB01E tsm: FSPHTSM1q proxy target=EXMB01E Target Node Agent Node --- --- EXMB01E CTNHEXMB01A We apparently have some configuration problem. When we try to run a local VSS backup from the agent node(CTNHEXMB01A), it always fails with ANS1033E (RC-53) An invalid TCP/IP address was specified. We have tried looking at all the documentation, with no resolution. I know this is not much information to go on, but I thought maybe this failure points to a specific problem. There is so much configuration information involved, I preferred not to try to show it all, but will provide whatever is needed. I also have a trace if that will help. Thanks, Larry McNutt The Timken Company - This message and any attachments are intended for the individual or entity named above. If you are not the intended recipient, please do not forward, copy, print, use or disclose this communication to others; also please notify the sender by replying to this message, and then delete it from your system. The Timken Company / The Timken Corporation
Re: Help needed configuring TDP for Exchange2007 with VSS.
This sounds very close to the: ANS1353E (RC53) Session rejected: Unknown or incorrect ID entered This problem can be caused if the register node was not done correctly. In order for proxy authority to work, you must have as admin node of Client Owner admin privilege for the DP/Exchange node. This is normally done for you automatically when you issue the REGISTER NODE command. However if you used something like: REGISTER NODE nodename password USERID=NONE or if you used the GUI to define the NODE, the admin id may not have been created. To check this... on your TSM Server, issue the QUERY ADMIN command. It should show something like this: tsm: SERVERq admin Administrator Days SinceDays Since Locked?Privilege Classes Name Last Access Password Set -- -- --- CTNHEXMB01A 1 134 No Client Owner CTNHEXMB02A 1 134 No Client Owner EXMB01E 1 134 No Client Owner If this is not the problem, the other thing to verify is that your CAD Service is configured and running. Thanks, Del ADSM: Dist Stor Manager ADSM-L@VM.MARIST.EDU wrote on 02/18/2009 02:39:10 PM: [image removed] Help needed configuring TDP for Exchange2007 with VSS. Mcnutt, Larry E. to: ADSM-L 02/18/2009 02:41 PM Sent by: ADSM: Dist Stor Manager ADSM-L@VM.MARIST.EDU Please respond to ADSM: Dist Stor Manager TSM 5.5.2.0 AIX 5.3 BA client 5.5.1 TDP for Mail 5.5.1 Cluster nodes CTNHEXMB01A and CTNHEXMB02A Exchange client node EXMB01E tsm: FSPHTSM1q proxy target=EXMB01E Target Node Agent Node --- --- EXMB01E CTNHEXMB01A We apparently have some configuration problem. When we try to run a local VSS backup from the agent node(CTNHEXMB01A), it always fails with ANS1033E (RC-53) An invalid TCP/IP address was specified. We have tried looking at all the documentation, with no resolution. I know this is not much information to go on, but I thought maybe this failure points to a specific problem. There is so much configuration information involved, I preferred not to try to show it all, but will provide whatever is needed. I also have a trace if that will help. Thanks, Larry McNutt The Timken Company - This message and any attachments are intended for the individual or entity named above. If you are not the intended recipient, please do not forward, copy, print, use or disclose this communication to others; also please notify the sender by replying to this message, and then delete it from your system. The Timken Company / The Timken Corporation
Re: Help needed configuring TDP for Exchange2007 with VSS.
Larry This is a known problem. See the fix list for TSM Client 5.5.1.10 Regards Steve Steven Harris TSM Admin, Sydney Australia Mcnutt, Larry E. larry.mcn...@tim To KEN.COM ADSM-L@VM.MARIST.EDU Sent by: ADSM:cc Dist Stor Manager Subject ads...@vm.marist [ADSM-L] Help needed configuring .EDU TDP for Exchange2007 with VSS. 19/02/2009 06:39 AM Please respond to ADSM: Dist Stor Manager ads...@vm.marist .EDU TSM 5.5.2.0 AIX 5.3 BA client 5.5.1 TDP for Mail 5.5.1 Cluster nodes CTNHEXMB01A and CTNHEXMB02A Exchange client node EXMB01E tsm: FSPHTSM1q proxy target=EXMB01E Target Node Agent Node --- --- EXMB01E CTNHEXMB01A We apparently have some configuration problem. When we try to run a local VSS backup from the agent node(CTNHEXMB01A), it always fails with ANS1033E (RC-53) An invalid TCP/IP address was specified. We have tried looking at all the documentation, with no resolution. I know this is not much information to go on, but I thought maybe this failure points to a specific problem. There is so much configuration information involved, I preferred not to try to show it all, but will provide whatever is needed. I also have a trace if that will help. Thanks, Larry McNutt The Timken Company - This message and any attachments are intended for the individual or entity named above. If you are not the intended recipient, please do not forward, copy, print, use or disclose this communication to others; also please notify the sender by replying to this message, and then delete it from your system. The Timken Company / The Timken Corporation
Exchange Surgery - Help needed.
Hi All I have a customer with a small TSM Setup on windows , DB is only 3GB. TSM is 5.3.4 Last August the legal eagles decreed that all expiration was to stop, and my predecessors did this. We are now at breaking point with a tape library that is about to burst, and finally someone (me) decided to do something about it. The majority of the data is exchange backups, with a twice a week full, four times a day incremental backup strategy. Legal has finally decided that We need to keep all backups from the earliest we have to end of August. From end of August to mid Feb we can delete all incrementals and all full backups except the last one of every month. Now, if I had space I would rename the node move it all to its new backup
Exchange Surgery - Help needed.
Sorry about that - take 2 Hi All I have a customer with a small TSM Setup on windows , DB is only 3GB. TSM is 5.3.4 Last August the legal eagles decreed that all expiration was to stop, and my predecessors did this. We are now at breaking point with a tape library that is about to burst, and finally someone (me) decided to do something about it. The majority of the data is exchange backups, with a twice a week full, four times a day incremental backup strategy. Legal has finally decided that We need to keep all backups from the earliest we have to end of August. From end of August to mid Feb we can delete all incrementals and all full backups except the last one of every month. I can see no way of doing this from the exchange client using the dsmc client to connect I can see appropriately named files for full backups and incrementals when I use the q backup {filespace}\ -subdir=y Attempting a delete backup of any sort or even a q backup on a fully qualified name gives me a no files found message tsm q backup {BLKVMSG001A\BLK1ASG4}\data\\BLK1ASG4A250\full -inactive ANS1092W No files matching search criteria were found Is there any way around this? or can API -created files only be deleted by the API? Thanks Steve Steve Harris TSM Admin, Sydney Australia
Re: Exchange Surgery - Help needed.
On Mar 14, 2008, at 6:40 AM, Steven Harris wrote: ...Is there any way around this? or can API -created files only be deleted by the API? There is very limited interoperability between the TSM API (upon which the TDPs are based) and the standard Backup-Archive client - and within the B/A client, only the CLI provides what interoperability there is. Chapter 4 of the API manual summarizes what cross-pollination exists. From my experimentation with the API, I know there isn't much. I'll defer to List participants having Exchange TDP experience to advise on techniques they have found to deal with your challenge (without writing an API applet). Richard SimsSr. Systems Programmer Boston University Office of Information Technology
Re: Exchange Surgery - Help needed.
Poor form to reply to my own post, but I couldn't sleep till I found a solution. Its nearly 4am now and I think I have one! Someone suggested directly to me that I could select from the backups table and run the unsupported delete objects command on each file. I tested that on a single file and it seemed to work, but I'm not feeling comfortable with it for the rather large number of entries I have to delete. So how about this? Its like performing surgery with the space shuttle robot arm but it might just work. Upgrade to TSM 5.5. This is necessary anyway. Set up a second TSM Server on the same box. Export the exchange data server-to-server from the old server to the new one using the fromdate/todate parameters to give me the slice of data that I need. Repeat as necessary with mergefiles on the import side. Once a slice has been copied across I can change the retentions on the old server and expire inventory to delete that slice. Please feel free to throw in your two cents worth if you can see a flaw in this I'm starting to feel like Geordy LaForge in Star Trek TNG If we just route the power from the core through to the phaser array Steve. __ Sorry about that - take 2 Hi All I have a customer with a small TSM Setup on windows , DB is only 3GB. TSM is 5.3.4 Last August the legal eagles decreed that all expiration was to stop, and my predecessors did this. We are now at breaking point with a tape library that is about to burst, and finally someone (me) decided to do something about it. The majority of the data is exchange backups, with a twice a week full, four times a day incremental backup strategy. Legal has finally decided that We need to keep all backups from the earliest we have to end of August. From end of August to mid Feb we can delete all incrementals and all full backups except the last one of every month. I can see no way of doing this from the exchange client using the dsmc client to connect I can see appropriately named files for full backups and incrementals when I use the q backup {filespace}\ -subdir=y Attempting a delete backup of any sort or even a q backup on a fully qualified name gives me a no files found message tsm q backup {BLKVMSG001A\BLK1ASG4}\data\\BLK1ASG4A250\full -inactive ANS1092W No files matching search criteria were found Is there any way around this? or can API -created files only be deleted by the API? Thanks Steve Steve Harris TSM Admin, Sydney Australia
Re: Exchange Surgery - Help needed.
I haven't tried the 5.5 fromdate and todate, but assuming it works as advertised on exchange data, then I don't think there is a need for an alternate server. You can just export straight to tape, then re-import later. I would also add in node renames but that is optional if you want to merge later: 1- rename node exchangehost exchangehost_Beginning-August 2- export node exchangehost_Beginning-August fromd=xxx todate=xxx other options. 3- rename node exchangehost_Beginning-August exhangehost_sept_monthend 4- export node exhangehost_sept_monthend fromd=xxx todate=xxx other options. 5- repeat for each month that you need. 6- rename the node back to exchangehost and set the expiration to the current desired expiration 7- import all the exports under their new node names in a new domain name If you want to merge the data, I suppose you can, but the main point was that I don't see the necessity for a new server instance. You only need to put the data under a different node name, in a separate domain with a No Limit copygroup. The management class needs to have the same name as the current management class. Hope that made sense! Shawn Drew Data Protection Engineer Core IT Production BNP Paribas RCC, Inc. Internet [EMAIL PROTECTED] Sent by: ADSM-L@VM.MARIST.EDU 03/14/2008 01:00 PM Please respond to ADSM-L@VM.MARIST.EDU To ADSM-L cc Subject Re: [ADSM-L] Exchange Surgery - Help needed. Poor form to reply to my own post, but I couldn't sleep till I found a solution. Its nearly 4am now and I think I have one! Someone suggested directly to me that I could select from the backups table and run the unsupported delete objects command on each file. I tested that on a single file and it seemed to work, but I'm not feeling comfortable with it for the rather large number of entries I have to delete. So how about this? Its like performing surgery with the space shuttle robot arm but it might just work. Upgrade to TSM 5.5. This is necessary anyway. Set up a second TSM Server on the same box. Export the exchange data server-to-server from the old server to the new one using the fromdate/todate parameters to give me the slice of data that I need. Repeat as necessary with mergefiles on the import side. Once a slice has been copied across I can change the retentions on the old server and expire inventory to delete that slice. Please feel free to throw in your two cents worth if you can see a flaw in this I'm starting to feel like Geordy LaForge in Star Trek TNG If we just route the power from the core through to the phaser array Steve. __ Sorry about that - take 2 Hi All I have a customer with a small TSM Setup on windows , DB is only 3GB. TSM is 5.3.4 Last August the legal eagles decreed that all expiration was to stop, and my predecessors did this. We are now at breaking point with a tape library that is about to burst, and finally someone (me) decided to do something about it. The majority of the data is exchange backups, with a twice a week full, four times a day incremental backup strategy. Legal has finally decided that We need to keep all backups from the earliest we have to end of August. From end of August to mid Feb we can delete all incrementals and all full backups except the last one of every month. I can see no way of doing this from the exchange client using the dsmc client to connect I can see appropriately named files for full backups and incrementals when I use the q backup {filespace}\ -subdir=y Attempting a delete backup of any sort or even a q backup on a fully qualified name gives me a no files found message tsm q backup {BLKVMSG001A\BLK1ASG4}\data\\BLK1ASG4A250\full -inactive ANS1092W No files matching search criteria were found Is there any way around this? or can API -created files only be deleted by the API? Thanks Steve Steve Harris TSM Admin, Sydney Australia This message and any attachments (the message) is intended solely for the addressees and is confidential. If you receive this message in error, please delete it and immediately notify the sender. Any use not in accord with its purpose, any dissemination or disclosure, either whole or partial, is prohibited except formal approval. The internet can not guarantee the integrity of this message. BNP PARIBAS (and its subsidiaries) shall (will) not therefore be liable for the message if modified. Please note that certain functions and services for BNP Paribas may be performed by BNP Paribas RCC, Inc.
HELP NEEDED ASAP!!
One of oour main windows 2003 server crahsed today and the san disk it turs out is corrupted and we need to restore 2TB of user files to a new server. The users cannot login to their workstations because this server is used in our login process and each user maps a home directory to a share on that server when they login. I am in the process of creating a backupset so the restore can go quickly but our management needs the users to at least be able to login even if there data is not restored yet. So if I start a restore will TSM recreate all the folders with permissions first then start putting the data back last? If we can get the folder structure back first we can at least let people login. Does anyone know if TSM will put the folder structure back first with permissions? Thanks
Re: HELP NEEDED ASAP!!
I've never tested this but here is my guess: There are actually 2 types of restores, classic and no-query. In a no-query restore, I believe TSM creates a DUMMY directory structure at the beginning, but I'm not even sure it builds the whole thing at once. The idea is that laying down a dummy lets it restore the files without having to mount all the tapes once to get the directories, then again to get the files. So in your case I THINK it will restore the directories, but you won't have the permissions right. If I were you, I would run a RESTORE using the command line client and specify -dirsonly. That will get all your directories back ASAP, and they will be complete. Again, that comes with a disclaimer, I haven't done it myself... Wanda Prather I/O, I/O, It's all about I/O -(me) -Original Message- From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED] On Behalf Of Dearman, Richard Sent: Thursday, December 07, 2006 1:53 PM To: ADSM-L@VM.MARIST.EDU Subject: HELP NEEDED ASAP!! One of oour main windows 2003 server crahsed today and the san disk it turs out is corrupted and we need to restore 2TB of user files to a new server. The users cannot login to their workstations because this server is used in our login process and each user maps a home directory to a share on that server when they login. I am in the process of creating a backupset so the restore can go quickly but our management needs the users to at least be able to login even if there data is not restored yet. So if I start a restore will TSM recreate all the folders with permissions first then start putting the data back last? If we can get the folder structure back first we can at least let people login. Does anyone know if TSM will put the folder structure back first with permissions? Thanks
Re: HELP NEEDED ASAP!!
On Thursday 07 December 2006 19:53, Dearman, Richard wrote: One of oour main windows 2003 server crahsed today and the san disk it turs out is corrupted and we need to restore 2TB of user files to a new server. The users cannot login to their workstations because this server is used in our login process and each user maps a home directory to a share on that server when they login. I am in the process of creating a backupset so the restore can go quickly but our management needs the users to at least be able to login even if there data is not restored yet. Creating a backset will take more time then just doing the restore. If you want to speed up the restore, you can move the data of that node to a disk based storage pool or just to 1 tape with the move nodedata command. Stef
Re: HELP NEEDED ASAP!!
On Dec 7, 2006, at 2:07 PM, Prather, Wanda wrote: If I were you, I would run a RESTORE using the command line client and specify -dirsonly. That will get all your directories back ASAP, and they will be complete. Richard - Wanda has the Windows experience, so follow her guidance. My thought would be that you hopefully separated your directory backups into a separate storage pool via DIRMc, to facilitate quick directories restoral. (This is where planning-for-restore pans gold.) If not, everything is intermingled in the backups, so you'll have to step over a lot of client data in the backups to get at each directory - meaning that you're wasting the potential of restoring it then and there. The Restore Order concept in TSM will create temporary directory definitions for restored files until the restoral reaches the actual directories in the storage pools, though perhaps not with all the attributes. Richard Sims
Re: HELP NEEDED ASAP!!
This won't help you now, but it may help someone else before crisis hits 1) As part of the documentation of the server, use either the natvie 'net share' command, or rmtshare.exe from the Windows Resource Kit to document your shares. Create a batch file that creates the shares and copy it off somewhere. 2) Potentially, periodically use the native xcopy command (xcopy /t /e) to create your (empty) directory structure elsewhere and then zip it down into a single file and back that up. Should take minimal space, and when unzipped, voila. 3) If permissions are important, my favorite tool is fileacl.exe - google for it, it's truly wonderful. The most wonderful thing about it is that it can create its own batch file to document and reapply permissions to a directory structure. Kurt | -Original Message- | From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED] | Behalf Of | Dearman, Richard | Sent: Thursday, December 07, 2006 10:53 | To: ADSM-L@VM.MARIST.EDU | Subject: [ADSM-L] HELP NEEDED ASAP!! | | | One of oour main windows 2003 server crahsed today and the san disk it | turs out is corrupted and we need to restore 2TB of user | files to a new | server. | | The users cannot login to their workstations because this | server is used | in our login process and each user maps a home directory to a share on | that server when they login. I am in the process of creating | a backupset | so the restore can go quickly but our management needs the users to at | least be able to login even if there data is not restored yet. | | So if I start a restore will TSM recreate all the folders | with permissions | first then start putting the data back last? If we can get the folder | structure back first we can at least let people login. | | Does anyone know if TSM will put the folder structure back first with | permissions? | | Thanks |
Help needed
Hi, Could anyone help me on how to define/add 2 client schedules. It would be great if someone could list of the steps on how to go about these. For eg: Schedule 1: INCR --For Incremental Backup on a daily basis Schedule 2: FULL --For FULL Backup on a weekly basis (every Sunday ) Let the Client node be : CLIENT Let the Server Node be : SERVER Regards, Srinath G This e-mail has been scanned for viruses by the Cable Wireless e-mail security system - powered by MessageLabs. For more information on a proactive managed e-mail security service, visit http://www.cw.com/uk/emailprotection/ The information contained in this e-mail is confidential and may also be subject to legal privilege. It is intended only for the recipient(s) named above. If you are not named above as a recipient, you must not read, copy, disclose, forward or otherwise use the information contained in this email. If you have received this e-mail in error, please notify the sender (whose contact details are above) immediately by reply e-mail and delete the message and any attachments without retaining any copies.
Re: Help needed
tsmhelp define sched At 07:27 AM 9/28/2006, you wrote: Hi, Could anyone help me on how to define/add 2 client schedules. It would be great if someone could list of the steps on how to go about these. For eg: Schedule 1: INCR --For Incremental Backup on a daily basis Schedule 2: FULL --For FULL Backup on a weekly basis (every Sunday ) Let the Client node be : CLIENT Let the Server Node be : SERVER Regards, Srinath G This e-mail has been scanned for viruses by the Cable Wireless e-mail security system - powered by MessageLabs. For more information on a proactive managed e-mail security service, visit http://www.cw.com/uk/emailprotection/ The information contained in this e-mail is confidential and may also be subject to legal privilege. It is intended only for the recipient(s) named above. If you are not named above as a recipient, you must not read, copy, disclose, forward or otherwise use the information contained in this email. If you have received this e-mail in error, please notify the sender (whose contact details are above) immediately by reply e-mail and delete the message and any attachments without retaining any copies.
SPAM - Help Needed
Anyone here have an in with the list owners? I have emailed them three or four times trying to get an old email address of mine removed from the list. My company changed our email addresses from _ to . and I cannot send from the old address to remove myself. If anyone has a connection with the list owner, please get them to remove [EMAIL PROTECTED] ! Thanks and sorry for the spam. -Tom
sysback help needed !
hi all, i'm doing an test restore of rootvg from TSM via classic network boot the communication is fine and everything seems okay except this ... it simply hangs on following ... --- Type menu item number and press Enter or select Navigation key:1 IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM STARTING SOFTWARE IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBMPLEASE WAIT... IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM BOOTP: chosen-network-type = ethernet,auto,rj45,auto BOOTP: server IP =10.243.122.10 BOOTP: requested filename = BOOTP: client IP =10.243.166.9 BOOTP: client HW addr = 0 11 25 7e 4 4e BOOTP: gateway IP =10.243.166.1 BOOTP: device/[EMAIL PROTECTED]/[EMAIL PROTECTED]/[EMAIL PROTECTED] BOOTP: loc-code U789A.001.AAA1094-P1-T1 BOOTP: wait 60 seconds for Spanning Tree ... BOOTP R = 1 BOOTP S = 2 FILE: /tftpboot/axtprov2 BOOTP: chosen-network-type = ethernet,auto,rj45,auto BOOTP: server IP =10.243.122.10 BOOTP: requested filename = BOOTP: client IP =10.243.166.9 BOOTP: client HW addr = 0 11 25 7e 4 4e BOOTP: gateway IP =10.243.166.1 BOOTP: device/[EMAIL PROTECTED]/[EMAIL PROTECTED]/[EMAIL PROTECTED] BOOTP: loc-code U789A.001.AAA1094-P1-T1 BOOTP: wait 60 seconds for Spanning Tree ... BOOTP R = 1 BOOTP S = 2 FILE: /tftpboot/axtprov2 FINAL Packet Count = 16673 FINAL File Size = 8536286 bytes. load-base=0x4000 real-base=0xc0 Elapsed time since release of system processors: 16 mins 27 secs --- Welcome to AIX. boot image timestamp: 07:39 03/30 The current time and date: 10:59:09 03/30/2006 number of processors: 2size of memory: 3936Mb boot device: /[EMAIL PROTECTED]/[EMAIL PROTECTED]/[EMAIL PROTECTED]:10.243.122.10,,10.243.166.9,10.243.166.1,00,00 closing stdin and stdout... --- in documentation it clearly says that restored server has to be the same OS version for starting network boot, but i don't get it, the restored server just neeeds the boot image, no ? the bootp server is AIX 5.2 and the restored server is p505 with AIX 5.3 is/should be restored, the sysback backups went fine with no problems at all, i tested the restore with one old B50 server with AIX 5.2 and everything went fine, i'm suspicious about network connectivity but the firewall was allowed for ping,bootps,bootpd,1500,1023,1022,1239,tftpd ... i general i suspect that bootimage on AIX 5.2 server the BOOTP server is not okay for this kind of server with AIX 5.3 which is the one he needs,
Re: sysback help needed !
Perhaps I am reading this wrong, but here are some hints that I have learned over the years: 1) The bootp server must be at or above the oslevel of the restored server: AIX 5.3 can be used as a bootp server for AIX 5.2 AIX 5.2 cannot be used as a bootp server for AIX 5.3 This sounds like a show stopper till you are able to upgrade the NIM/bootp server. 2) In order for sysback to restore on different hardware, the sysback image must include all the device drivers for the restored machine. I was sure they fixed that during the upgrade to AIX 5.3 by loading ALL device drivers during installation. Just to be sure, you might try the following steps: a) install devices.* from the install media b) recreate your sysback image c) re-run your sysback restore Question: What is the LED shown for your 505 server? The LED might also indicate the problem. goc [EMAIL PROTECTED] Sent by: ADSM: Dist Stor Manager ADSM-L@VM.MARIST.EDU 04/03/2006 02:21 AM Please respond to ADSM: Dist Stor Manager ADSM-L@VM.MARIST.EDU To ADSM-L@VM.MARIST.EDU cc Subject sysback help needed ! hi all, i'm doing an test restore of rootvg from TSM via classic network boot the communication is fine and everything seems okay except this ... it simply hangs on following ... --- Type menu item number and press Enter or select Navigation key:1 IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM STARTING SOFTWARE IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBMPLEASE WAIT... IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM IBM BOOTP: chosen-network-type = ethernet,auto,rj45,auto BOOTP: server IP =10.243.122.10 BOOTP: requested filename = BOOTP: client IP =10.243.166.9 BOOTP: client HW addr = 0 11 25 7e 4 4e BOOTP: gateway IP =10.243.166.1 BOOTP: device/[EMAIL PROTECTED]/[EMAIL PROTECTED]/[EMAIL PROTECTED] BOOTP: loc-code U789A.001.AAA1094-P1-T1 BOOTP: wait 60 seconds for Spanning Tree ... BOOTP R = 1 BOOTP S = 2 FILE: /tftpboot/axtprov2 BOOTP: chosen-network-type = ethernet,auto,rj45,auto BOOTP: server IP =10.243.122.10 BOOTP: requested filename = BOOTP: client IP =10.243.166.9 BOOTP: client HW addr = 0 11 25 7e 4 4e BOOTP: gateway IP =10.243.166.1 BOOTP: device/[EMAIL PROTECTED]/[EMAIL PROTECTED]/[EMAIL PROTECTED] BOOTP: loc-code U789A.001.AAA1094-P1-T1 BOOTP: wait 60 seconds for Spanning Tree ... BOOTP R = 1 BOOTP S = 2 FILE: /tftpboot/axtprov2 FINAL Packet Count = 16673 FINAL File Size = 8536286 bytes. load-base=0x4000 real-base=0xc0 Elapsed time since release of system processors: 16 mins 27 secs --- Welcome to AIX
[ANR0848W] Help needed with errors in expiration.
Hi All, When we do an expiration, we get almost 800 times ANR0848W and ANR0104E errors: 06/27/2005 09:50:04 ANR0104E imarins.c(1818): Error 2 deleting row from table Archive.Descriptions. (SESSION: 447842, PROCESS: 88) 06/27/2005 09:50:04 ANR0848W Expiration failed to delete Archive file / oracle/A11/sapdata3/btabd_34/btabd.data34 for node KL100DWY-SAP and filespace /tdp - file will be skipped. (SESSION: 447842, PROCESS: 88) 06/27/2005 09:50:04 ANR0104E imarins.c(1818): Error 2 deleting row from table Archive.Descriptions. (SESSION: 447842, PROCESS: 88) 06/27/2005 09:50:04 ANR0848W Expiration failed to delete Archive file / oracle/A11/sapdata5/btabd_1/btabd.data1 for node KL100DWY-SAP and filespace /tdp - file will be skipped. (SESSION: 447842, PROCESS: 88) 06/27/2005 09:50:04 ANR0104E imarins.c(1818): Error 2 deleting row from table Archive.Descriptions. (SESSION: 447842, PROCESS: 88) 06/27/2005 09:50:04 ANR0848W Expiration failed to delete Archive file / oracle/A11/sapdata2/btabd_35/btabd.data35 for node KL100DWY-SAP and filespace /tdp - file will be skipped. (SESSION: 447842, PROCESS: 88) 06/27/2005 09:50:04 ANR0104E imarins.c(1818): Error 2 deleting row from table Archive.Descriptions. (SESSION: 447842, PROCESS: 88) Can anyone help us with this one ?? Thanks in advance, Maurice van 't Loo The Netherlands ** For information, services and offers, please visit our web site: http://www.klm.com. This e-mail and any attachment may contain confidential and privileged material intended for the addressee only. If you are not the addressee, you are notified that no part of the e-mail or any attachment may be disclosed, copied or distributed, and that any other action related to this e-mail or attachment is strictly prohibited, and may be unlawful. If you have received this e-mail by error, please notify the sender immediately by return e-mail, and delete this message. Koninklijke Luchtvaart Maatschappij NV (KLM), its subsidiaries and/or its employees shall not be liable for the incorrect or incomplete transmission of this e-mail or any attachments, nor responsible for any delay in receipt. **
AW: [ADSM-L] [ANR0848W] Help needed with errors in expiration.
Hi, look at this side http://www-1.ibm.com/support/docview.wss?rs=663context=SSGSG7q1=imarins.cuid=swg21177502loc=en_UScs=utf-8lang=en How to resolve: ANR0104E imarins.c(1496): Error 2 deleting row from table Archive.Descriptions. Problem During DELETE VOLUME volumename DISCARDDATA=YES or normal EXPIRATION the ANR0104E message is reported in the IBM TSM server activity log. Solution Two possibilities could result in the problem: - the object was never accounted for in the description tables - there is a serialization discrepancy when deleting converted archive To resolve the problem, with a 5.1 TSM server version submit: DELETE ARCHDESCRIPTIONS nodename CONVERT ARCHIVE nodename with a 5.2 TSM server submit: UNDO ARCHCONVERSION nodename CONVERT ARCHIVE nodename regards Michael -Ursprüngliche Nachricht- Von: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED] Im Auftrag von Loo, M. van 't - SPLXM Gesendet: Montag, 27. Juni 2005 10:11 An: ADSM-L@VM.MARIST.EDU Betreff: [ADSM-L] [ANR0848W] Help needed with errors in expiration. Hi All, When we do an expiration, we get almost 800 times ANR0848W and ANR0104E errors: 06/27/2005 09:50:04 ANR0104E imarins.c(1818): Error 2 deleting row from table Archive.Descriptions. (SESSION: 447842, PROCESS: 88) 06/27/2005 09:50:04 ANR0848W Expiration failed to delete Archive file / oracle/A11/sapdata3/btabd_34/btabd.data34 for node KL100DWY-SAP and filespace /tdp - file will be skipped. (SESSION: 447842, PROCESS: 88) 06/27/2005 09:50:04 ANR0104E imarins.c(1818): Error 2 deleting row from table Archive.Descriptions. (SESSION: 447842, PROCESS: 88) 06/27/2005 09:50:04 ANR0848W Expiration failed to delete Archive file / oracle/A11/sapdata5/btabd_1/btabd.data1 for node KL100DWY-SAP and filespace /tdp - file will be skipped. (SESSION: 447842, PROCESS: 88) 06/27/2005 09:50:04 ANR0104E imarins.c(1818): Error 2 deleting row from table Archive.Descriptions. (SESSION: 447842, PROCESS: 88) 06/27/2005 09:50:04 ANR0848W Expiration failed to delete Archive file / oracle/A11/sapdata2/btabd_35/btabd.data35 for node KL100DWY-SAP and filespace /tdp - file will be skipped. (SESSION: 447842, PROCESS: 88) 06/27/2005 09:50:04 ANR0104E imarins.c(1818): Error 2 deleting row from table Archive.Descriptions. (SESSION: 447842, PROCESS: 88) Can anyone help us with this one ?? Thanks in advance, Maurice van 't Loo The Netherlands ** For information, services and offers, please visit our web site: http://www.klm.com. This e-mail and any attachment may contain confidential and privileged material intended for the addressee only. If you are not the addressee, you are notified that no part of the e-mail or any attachment may be disclosed, copied or distributed, and that any other action related to this e-mail or attachment is strictly prohibited, and may be unlawful. If you have received this e-mail by error, please notify the sender immediately by return e-mail, and delete this message. Koninklijke Luchtvaart Maatschappij NV (KLM), its subsidiaries and/or its employees shall not be liable for the incorrect or incomplete transmission of this e-mail or any attachments, nor responsible for any delay in receipt. **
Re: AW: [ADSM-L] [ANR0848W] Help needed with errors in e xpiration.
Thanks for the very fast response. We tried it, the processes went successful, but when we do a new expiration, we still have the same errors. Lucky it's sap-data, so we renamed the nodename, made a new one with the original name, so the client haves new and clean FS's. And after 14 days we can delete the current data... Thanks, Maurice -Original Message- From: Michael Garnebode [mailto:[EMAIL PROTECTED] Sent: maandag 27 juni 2005 10:18 To: ADSM-L@VM.MARIST.EDU Subject:[ADSM-L] AW: [ADSM-L] [ANR0848W] Help needed with errors in expiration. Hi, look at this side http://www-1.ibm.com/support/docview.wss?rs=663context=SSGSG7q1=imarins.c; uid=swg21177502loc=en_UScs=utf-8lang=en How to resolve: ANR0104E imarins.c(1496): Error 2 deleting row from table Archive.Descriptions. Problem During DELETE VOLUME volumename DISCARDDATA=YES or normal EXPIRATION the ANR0104E message is reported in the IBM TSM server activity log. Solution Two possibilities could result in the problem: - the object was never accounted for in the description tables - there is a serialization discrepancy when deleting converted archive To resolve the problem, with a 5.1 TSM server version submit: DELETE ARCHDESCRIPTIONS nodename CONVERT ARCHIVE nodename with a 5.2 TSM server submit: UNDO ARCHCONVERSION nodename CONVERT ARCHIVE nodename regards Michael -Ursprüngliche Nachricht- Von: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED] Im Auftrag von Loo, M. van 't - SPLXM Gesendet: Montag, 27. Juni 2005 10:11 An: ADSM-L@VM.MARIST.EDU Betreff: [ADSM-L] [ANR0848W] Help needed with errors in expiration. Hi All, When we do an expiration, we get almost 800 times ANR0848W and ANR0104E errors: 06/27/2005 09:50:04 ANR0104E imarins.c(1818): Error 2 deleting row from table Archive.Descriptions. (SESSION: 447842, PROCESS: 88) 06/27/2005 09:50:04 ANR0848W Expiration failed to delete Archive file / oracle/A11/sapdata3/btabd_34/btabd.data34 for node KL100DWY-SAP and filespace /tdp - file will be skipped. (SESSION: 447842, PROCESS: 88) 06/27/2005 09:50:04 ANR0104E imarins.c(1818): Error 2 deleting row from table Archive.Descriptions. (SESSION: 447842, PROCESS: 88) 06/27/2005 09:50:04 ANR0848W Expiration failed to delete Archive file / oracle/A11/sapdata5/btabd_1/btabd.data1 for node KL100DWY-SAP and filespace /tdp - file will be skipped. (SESSION: 447842, PROCESS: 88) 06/27/2005 09:50:04 ANR0104E imarins.c(1818): Error 2 deleting row from table Archive.Descriptions. (SESSION: 447842, PROCESS: 88) 06/27/2005 09:50:04 ANR0848W Expiration failed to delete Archive file / oracle/A11/sapdata2/btabd_35/btabd.data35 for node KL100DWY-SAP and filespace /tdp - file will be skipped. (SESSION: 447842, PROCESS: 88) 06/27/2005 09:50:04 ANR0104E imarins.c(1818): Error 2 deleting row from table Archive.Descriptions. (SESSION: 447842, PROCESS: 88) Can anyone help us with this one ?? Thanks in advance, Maurice van 't Loo The Netherlands ** For information, services and offers, please visit our web site: http://www.klm.com. This e-mail and any attachment may contain confidential and privileged material intended for the addressee only. If you are not the addressee, you are notified that no part of the e-mail or any attachment may be disclosed, copied or distributed, and that any other action related to this e-mail or attachment is strictly prohibited, and may be unlawful. If you have received this e-mail by error, please notify the sender immediately by return e-mail, and delete this message. Koninklijke Luchtvaart Maatschappij NV (KLM), its subsidiaries and/or its employees
Re: [ANR0848W] Help needed with errors in expiration.
You don't mention your server level, but I also encountered the ANR0104E (but not ANR0848W) in the expiration of Archive type data. The expiration conclusion message, ANR0812I, reflected the count of such errors. You've probably researched the messages at the IBM site and seen the APAR description as it being a mystery problem. In my case, I didn't consider it serious and let it be. After about four weeks, the error messages ceased and all was well, indicating that some other server work in the database resulted in elimination of the problem structure. Richard Sims On Jun 27, 2005, at 4:10 AM, Loo, M. van 't - SPLXM wrote: Hi All, When we do an expiration, we get almost 800 times ANR0848W and ANR0104E errors: 06/27/2005 09:50:04 ANR0104E imarins.c(1818): Error 2 deleting row from table Archive.Descriptions. (SESSION: 447842, PROCESS: 88) 06/27/2005 09:50:04 ANR0848W Expiration failed to delete Archive file / oracle/A11/sapdata3/btabd_34/btabd.data34 for node KL100DWY-SAP and filespace /tdp - file will be skipped. (SESSION: 447842, PROCESS: 88) ...
Documentation help needed
We are running TSM 5.2.2.0 on AIX. I have a Windows node using SQL TDP (by it's new name) that is getting errors. We found the error code in a search on IBM's website, but the document is protected. Because our TSM licensing is all messed up (and has been for a long time), I do not have access to protected TSM areas. Would someone be willing to go to the following webpages, copy the text, and email it to me privately? My Windows admin and I would really appreciate it! Thanks. http://www-1.ibm.com/support/docview.wss?uid=swg21083735 http://www-1.ibm.com/support/docview.wss?uid=swg21083402 http://www-1.ibm.com/support/docview.wss?uid=swg21194737 http://www-1.ibm.com/support/docview.wss?uid=swg21109076 http://www-1.ibm.com/support/docview.wss?uid=swg21156744 Nancy Reeves Technical Support, Wichita State University [EMAIL PROTECTED] 316-978-3860
Re: TSM and Quantum or StorageTek decision - help needed
I quite like the technology but unfortunately IBM is out of favour with the people who will make the final decision - also considerably more expensive than either of the others I mentioned, David Fosdike, GSEC #4132 Senior Technology and Security Specialist Elders Limited 08 8425 4565 0417 714 467 -Original Message- From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED] On Behalf Of William Sent: Sunday, 8 May 2005 1:47 AM To: ADSM-L@VM.MARIST.EDU Subject: Re: [ADSM-L] TSM and Quantum or StorageTek decision - help needed Why don't you choose 3584? On 5/6/05, Waldon, Jo [EMAIL PROTECTED] wrote: Have found StorageTek libraries brilliant with all flavours of TSM on all flavours of OS's. Support is brilliant as well and the engineers are fantastic in implementing, migrating (from other libraries) and upgrading on all different OS's. Currently using L40, L80, L180 and SL500 to name a few. Have been thru same upgrade from 3583 to L180 - if your engineer is any good, you'll have very little issues. IBM thought there might be data integrity issues going from LTO1 to LT02 drives - found no problems... and this happened well over a year ago. -Original Message- From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED] On Behalf Of David Fosdike Sent: Friday, 6 May 2005 3:39 p.m. To: ADSM-L@VM.MARIST.EDU Subject: TSM and Quantum or StorageTek decision - help needed We are currently upgrading our hardware (IBM 3583 L72 LTO1) to either StorageTek L80 LTO2 or Quantum M2500 LTO2/3. The decision is made hard because from a hardware and support perspective other users we have spoken to can only sing the praises of both. So it will come down to dollars and interaction with TSM. We have found it hard to find a Quantum M2500 user who uses TSM also. Are their any user experiences that anyone could share to help us from a TSM point of view? Thanks in advance, David Fosdike, Senior Technology and Security Specialist Elders Limited Adelaide, South Australia +61 8 8425 4565 +61 417 714 467
Re: TSM and Quantum or StorageTek decision - help needed
Why don't you choose 3584? On 5/6/05, Waldon, Jo [EMAIL PROTECTED] wrote: Have found StorageTek libraries brilliant with all flavours of TSM on all flavours of OS's. Support is brilliant as well and the engineers are fantastic in implementing, migrating (from other libraries) and upgrading on all different OS's. Currently using L40, L80, L180 and SL500 to name a few. Have been thru same upgrade from 3583 to L180 - if your engineer is any good, you'll have very little issues. IBM thought there might be data integrity issues going from LTO1 to LT02 drives - found no problems... and this happened well over a year ago. -Original Message- From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED] On Behalf Of David Fosdike Sent: Friday, 6 May 2005 3:39 p.m. To: ADSM-L@VM.MARIST.EDU Subject: TSM and Quantum or StorageTek decision - help needed We are currently upgrading our hardware (IBM 3583 L72 LTO1) to either StorageTek L80 LTO2 or Quantum M2500 LTO2/3. The decision is made hard because from a hardware and support perspective other users we have spoken to can only sing the praises of both. So it will come down to dollars and interaction with TSM. We have found it hard to find a Quantum M2500 user who uses TSM also. Are their any user experiences that anyone could share to help us from a TSM point of view? Thanks in advance, David Fosdike, Senior Technology and Security Specialist Elders Limited Adelaide, South Australia +61 8 8425 4565 +61 417 714 467
TSM and Quantum or StorageTek decision - help needed
We are currently upgrading our hardware (IBM 3583 L72 LTO1) to either StorageTek L80 LTO2 or Quantum M2500 LTO2/3. The decision is made hard because from a hardware and support perspective other users we have spoken to can only sing the praises of both. So it will come down to dollars and interaction with TSM. We have found it hard to find a Quantum M2500 user who uses TSM also. Are their any user experiences that anyone could share to help us from a TSM point of view? Thanks in advance, David Fosdike, Senior Technology and Security Specialist Elders Limited Adelaide, South Australia +61 8 8425 4565 +61 417 714 467
Re: TSM and Quantum or StorageTek decision - help needed
Have found StorageTek libraries brilliant with all flavours of TSM on all flavours of OS's. Support is brilliant as well and the engineers are fantastic in implementing, migrating (from other libraries) and upgrading on all different OS's. Currently using L40, L80, L180 and SL500 to name a few. Have been thru same upgrade from 3583 to L180 - if your engineer is any good, you'll have very little issues. IBM thought there might be data integrity issues going from LTO1 to LT02 drives - found no problems... and this happened well over a year ago. -Original Message- From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED] On Behalf Of David Fosdike Sent: Friday, 6 May 2005 3:39 p.m. To: ADSM-L@VM.MARIST.EDU Subject: TSM and Quantum or StorageTek decision - help needed We are currently upgrading our hardware (IBM 3583 L72 LTO1) to either StorageTek L80 LTO2 or Quantum M2500 LTO2/3. The decision is made hard because from a hardware and support perspective other users we have spoken to can only sing the praises of both. So it will come down to dollars and interaction with TSM. We have found it hard to find a Quantum M2500 user who uses TSM also. Are their any user experiences that anyone could share to help us from a TSM point of view? Thanks in advance, David Fosdike, Senior Technology and Security Specialist Elders Limited Adelaide, South Australia +61 8 8425 4565 +61 417 714 467
HELP needed. Can't use rmt3 rmt4 for SAN backup.
Hi All, I have this scenario on the TSM server: -TSM Svr 5.2.3 -TSM Client 5.2.2 -TSM SAN 5.2.2 -Tape library 3584 LTO with 4 drives I have another clientA with SAN attached. It can see (lsdev -Cc) the 3rd and 4 th drive of the 3584. 1st and 2nd is by another clientB. For clientB, after configuring the storage agent and test the backup, it manage to backup nicely thru LAN-free with no error. For clientA, after configuring, tested the backup, it gives error=46 on the dsmsta, could not mount tape. But the Tsm serverconsole, a drive has been mounted(different drive).Why is this? For client B,on the tsm server i configured the path for drive to /dev/rmt1 and /dev/rmt2 same as clientA since that is what is seen using lsdev -Cc tape for ClientA and ClientB. The difference for both client is that for clientB rmt1 on clientB maps excatly to the tsmsvr rmt1. This is check with lscfg -vl rmt1. But for clientA rmt1 maps to rmt3 of tsmsvr. The rmt is configured that way to separate the load of backups for clientA and clientB on to the tape drives. Pls help me to resolve this. Thanks and best regards Ameerul Madzali __ Do you Yahoo!? Yahoo! Mail - 50x more storage than other providers! http://promotions.yahoo.com/new_mail
Re: HELP needed. Can't use rmt3 rmt4 for SAN backup.
Ameerul, You should make sure that the drives maps are exact. E.g. when drive rmt1 on clientA maps to rmt3 on tsmsrv you should make sure that whne you define the tape path for clientA that you use the correct drive within TSM (that is the DRIVE for rmt3), the physical device is however /dev/rmt1 (the device on clientA). Hope this helps. If not please mail the output of lscfg -vl rmt1 (from clientA) and lscfg -vl rmt3 (from tsmsrv) and the output of q path f=d. Richard. Ameerul Mazli [EMAIL PROTECTED] Sent by: ADSM: Dist Stor Manager [EMAIL PROTECTED] 10-08-2004 09:21 Please respond to ADSM: Dist Stor Manager To: [EMAIL PROTECTED] cc: Subject:HELP needed. Can't use rmt3 rmt4 for SAN backup. Hi All, I have this scenario on the TSM server: -TSM Svr 5.2.3 -TSM Client 5.2.2 -TSM SAN 5.2.2 -Tape library 3584 LTO with 4 drives I have another clientA with SAN attached. It can see (lsdev -Cc) the 3rd and 4 th drive of the 3584. 1st and 2nd is by another clientB. For clientB, after configuring the storage agent and test the backup, it manage to backup nicely thru LAN-free with no error. For clientA, after configuring, tested the backup, it gives error=46 on the dsmsta, could not mount tape. But the Tsm serverconsole, a drive has been mounted(different drive).Why is this? For client B,on the tsm server i configured the path for drive to /dev/rmt1 and /dev/rmt2 same as clientA since that is what is seen using lsdev -Cc tape for ClientA and ClientB. The difference for both client is that for clientB rmt1 on clientB maps excatly to the tsmsvr rmt1. This is check with lscfg -vl rmt1. But for clientA rmt1 maps to rmt3 of tsmsvr. The rmt is configured that way to separate the load of backups for clientA and clientB on to the tape drives. Pls help me to resolve this. Thanks and best regards Ameerul Madzali __ Do you Yahoo!? Yahoo! Mail - 50x more storage than other providers! http://promotions.yahoo.com/new_mail
Query / Select help needed
Hello- I'm trying to determine a query or a select statement that will tell me the total number of files managed by the TSM database for a particular client, and the total amount of tape space occupied for that client. q occ shows me the number of files and space occupied, but it isn't totaled. I need to obtain this information for over 300 clients, so I really don't want to have to add all of them manually. Can anyone help me out? Is there a simple way to obtain the totals, or am I going to have to write a shell script? Thanks! -Kevin
Re: Query / Select help needed
How about something like this: select stgpool_name, sum(num_files) as Total Files, sum(physical_mb) as Physical MB, sum(logical_mb) as Logical MB from occupancy where node_name='STORMAN' group by stgpool_name (instead of STORMAN put in your node name in UPPER CASE) If you know which storage pools in particular you want info for, and you *don't* want to see other pools, then just add some conditions to the WHERE clause, i.e. where node_name='STORMAN' and stgpool_name='POOL1' and stgpool_name='POOL2' ... or where node_name='STORMAN' and not stgpool_name = 'DISKPOOLNAME' ... Regards, Andy Andy Raibeck IBM Software Group Tivoli Storage Manager Client Development Internal Notes e-mail: Andrew Raibeck/Tucson/[EMAIL PROTECTED] Internet e-mail: [EMAIL PROTECTED] The only dumb question is the one that goes unasked. The command line is your friend. Good enough is the enemy of excellence. ADSM: Dist Stor Manager [EMAIL PROTECTED] wrote on 05/20/2004 08:56:20: Hello- I'm trying to determine a query or a select statement that will tell me the total number of files managed by the TSM database for a particular client, and the total amount of tape space occupied for that client. q occ shows me the number of files and space occupied, but it isn't totaled. I need to obtain this information for over 300 clients, so I really don't want to have to add all of them manually. Can anyone help me out? Is there a simple way to obtain the totals, or am I going to have to write a shell script? Thanks! -Kevin
Re: Query / Select help needed
Thank you very much! I think that will give me everything I need. -Original Message- From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED] On Behalf Of Andrew Raibeck Sent: Thursday, May 20, 2004 12:47 PM To: [EMAIL PROTECTED] Subject: Re: Query / Select help needed How about something like this: select stgpool_name, sum(num_files) as Total Files, sum(physical_mb) as Physical MB, sum(logical_mb) as Logical MB from occupancy where node_name='STORMAN' group by stgpool_name (instead of STORMAN put in your node name in UPPER CASE) If you know which storage pools in particular you want info for, and you *don't* want to see other pools, then just add some conditions to the WHERE clause, i.e. where node_name='STORMAN' and stgpool_name='POOL1' and stgpool_name='POOL2' ... or where node_name='STORMAN' and not stgpool_name = 'DISKPOOLNAME' ... Regards, Andy Andy Raibeck IBM Software Group Tivoli Storage Manager Client Development Internal Notes e-mail: Andrew Raibeck/Tucson/[EMAIL PROTECTED] Internet e-mail: [EMAIL PROTECTED] The only dumb question is the one that goes unasked. The command line is your friend. Good enough is the enemy of excellence. ADSM: Dist Stor Manager [EMAIL PROTECTED] wrote on 05/20/2004 08:56:20: Hello- I'm trying to determine a query or a select statement that will tell me the total number of files managed by the TSM database for a particular client, and the total amount of tape space occupied for that client. q occ shows me the number of files and space occupied, but it isn't totaled. I need to obtain this information for over 300 clients, so I really don't want to have to add all of them manually. Can anyone help me out? Is there a simple way to obtain the totals, or am I going to have to write a shell script? Thanks! -Kevin
Help needed ! Migration process fails :(
Hi there, I have TSM (Version 5, Release 1, Level 5.0) installed on W2k SP4 server. Connected to it is IBM 3600-r20 library with ultrium td1 drive. I'm having a problem which already gives me a headache. It's presented in the activity log like this : 05/14/2004 12:50:49 ANR8337I LTO volume AA9004L1 mounted in drive MT11.0.1.2 (mt11.0.1.2). 05/14/2004 12:51:00 ANR1340I Scratch volume AA9004L1 is now defined in storage pool ML_TAPEDAILYPOOL. 05/14/2004 12:54:05 ANR8311E An I/O error occurred while accessing drive MT11.0.1.2 (mt11.0.1.2) for WRITE operation, errno = 1117. 05/14/2004 12:54:07 ANR1411W Access mode for volume AA9004L1 now set to read-only due to write error. 05/14/2004 12:54:07 ANR1181E astxn.c509: Data storage transaction 0:21378 was aborted. 05/14/2004 12:54:07 ANR2183W dfmigr.c1965: Transaction 0:21378 was aborted. 05/14/2004 12:54:07 ANR1033W Migration process 21 terminated for storage pool ML_DISKDAILYPOOL - transaction aborted. 05/14/2004 12:54:07 ANR0985I Process 21 for MIGRATION running in the BACKGROUND completed with completion state FAILURE at 12:54:07. 05/14/2004 12:54:07 ANR1002I Migration for storage pool ML_DISKDAILYPOOL will be retried in 60 seconds. 05/14/2004 12:54:12 ANR1341I Scratch volume AA9004L1 has been deleted from storage pool ML_TAPEDAILYPOOL. It fails after writing solid amounts of data on tape (2-20GB). The storage pool configuration is simple : Storage DeviceEstimated Pct Pct High Low Next Pool Name Class Name CapacityUtilMigrMig Mig Storage (MB)Pct Pct Pool --- -- -- - - --- --- DISKPOOL DISK 10,000.013.313.310099 LTOPOOL1 LTOPOOL1 LTOCLASS1 0.0 0.0 0.0 9070 ML_DISKARC- DISK0.0 0.0 0.0 9070 ML_TAPEARC HIVEPOOL HIVEPOOL ML_DISKDAI- DISK 200,000.016.414.2 2 1 ML_TAPEDAI- LYPOOL LYPOOL ML_TAPEARC- LTOCLASS1 0.0 0.0 0.0 9070 HIVEPOOL ML_TAPEDAI- LTOCLASS195,367,000 0.0 0.2 5 1 LYPOOL.0 SPACEMGPOOL DISK0.0 0.0 0.0 9070 If I backup or archive something directly to storage pool of ltoclass1 then it finishes without any erros, however the migration process always failes. It then tries to mount another libvol and failes again... And so on... I also successfully backed up files to tape with NTBackup. So this happens only when I try to migrate the files :( Does anyone have any ideas on why is this happening ? Haven't found anything in the forums or mailing lists :((( Grateful for any suggestions and will provide : [EMAIL PROTECTED]
Help needed to free slots in a 3583 library
Hi all, I have a query regarding tape usage: Analysis: We currently have TSM 5.2 installed on a WIN2k Server platform backing up appx. 50 nodes to 2 disk pools and then migrating to LTO tapes in a 3583 library, one copy for offsite vault and one copy to remain onsite within the tape library. We have 60 available slots for LTO volumes as we leave the I/O drawer free to take volumes in and out of the library. We are using 100gb native LTO volumes. We have 3 nodes that are configured to backup using collocation. Problem: We are constantly running at full capacity within the library (always 59 Private volumes) leaving only one slot for scratch. Because we have 3 collocated nodes and produce a dbbackup everyday to go offsite we need a minimum of 5 free slots (assuming all other backed up data for other nodes does not exceed 100Gb). When I issue 'q eve * * begind=-1' to check the previous evenings backups I am usually shown that most nodes have completed but often have only 2 tapes to go offsite (inc. the dbbackup) suggesting that collocation is not happening. Aside from this, when I issue a script to check what space I am able to relaim from the onsite tapes (in order to free up some slots for scratch volumes) I am presented with the following (I have omitted the offsite copy LTOs): STGPOOL_NAME VOLUME_NAMEPCT_RECLAIM ACCESS -- -- --- -- BACKUP_TAPE000411L1 43.8 READWRITE BACKUP_TAPE000466L1 43.5 READWRITE BACKUP_TAPE000362L1 43.0 READWRITE BACKUP_TAPE000382L1 42.6 READWRITE BACKUP_TAPE000380L1 39.6 READWRITE BACKUP_TAPE000529L1 39.1 READWRITE BACKUP_TAPE000632L1 38.7 READWRITE BACKUP_TAPE000563L1 38.4 READWRITE BACKUP_TAPE000418L1 35.4 READWRITE BACKUP_TAPE000403L1 34.6 READWRITE BACKUP_TAPE000572L1 33.7 READWRITE BACKUP_TAPE000364L1 31.4 READWRITE BACKUP_TAPE000564L1 28.8 READWRITE BACKUP_TAPE000402L1 28.5 READWRITE BACKUP_TAPE000495L1 25.8 READWRITE BACKUP_TAPE000391L1 25.6 READWRITE BACKUP_TAPE000412L1 22.9 READWRITE BACKUP_TAPE000453L1 22.8 READWRITE BACKUP_TAPE000501L1 21.3 READWRITE BACKUP_TAPE000413L1 16.6 READWRITE BACKUP_TAPE000612L1 16.1 READWRITE BACKUP_TAPE000470L1 14.8 READWRITE BACKUP_TAPE000618L1 11.4 READWRITE BACKUP_TAPE000395L1 11.1 READWRITE BACKUP_TAPE000607L1 6.3 READWRITE BACKUP_TAPE000388L1 3.2 READWRITE BACKUP_TAPE000422L1 2.4 READWRITE BACKUP_TAPE000570L1 2.2 READWRITE BACKUP_TAPE000516L1 0.0 READWRITE BACKUP_TAPE_COL000463L1 44.7 READWRITE BACKUP_TAPE_COL000600L1 42.9 READWRITE BACKUP_TAPE_COL000575L1 41.4 READWRITE BACKUP_TAPE_COL000530L1 40.3 READWRITE BACKUP_TAPE_COL000540L1 37.7 READWRITE BACKUP_TAPE_COL000605L1 35.7 READWRITE BACKUP_TAPE_COL000417L1 34.7 READWRITE BACKUP_TAPE_COL000457L1 33.0 READWRITE BACKUP_TAPE_COL000437L1 32.4 READWRITE BACKUP_TAPE_COL000644L1 29.5 READWRITE BACKUP_TAPE_COL000415L1 28.4 READWRITE BACKUP_TAPE_COL000581L1 28.3 READWRITE BACKUP_TAPE_COL000583L1 28.3 READWRITE BACKUP_TAPE_COL000601L1 27.7 READWRITE BACKUP_TAPE_COL
Re: Help needed to free slots in a 3583 library
I was in your same boat. It sucks. We have since turned colocation off since we're more of a backup shop, not into tons of restores. Also, we will leave the DRM tapes in the library to get filled more rather than sending them offsite every day (we do not have daily tape delivery. Yet.) We currently have our reclamation set to 30% to bump up that utilization, but we run that on two admin sechdules. Here's an example: At 12:00, we have an admin schedule that issues update stg copypool reclaim=30 At 16:00, we have an admin schedule that issues update stg copypool reclaim=100 This is what our q vol shows (keep in mind that a whole ton of these are scratch tapes right now) As you can see, the tape utilization is a lot higher. 1-L1 COPYPOOL LTOCLASS205,859.4 97.3Full 2-L1 COPYPOOL LTOCLASS106,113.6 86.0 Filling 3-L1 TAPEPOOL LTOCLASS201,242.6 92.2Full 6-L1 TAPEPOOL LTOCLASS216,692.6 99.9Full 7-L1 COPYPOOL LTOCLASS213,599.4 100.0Full 8-L1 COPYPOOL LTOCLASS201,831.4 83.1Full 00010-L1 COPYPOOL LTOCLASS 0.00.0 Empty 00014-L1 COPYPOOL LTOCLASS178,820.2 87.3 Filling 00015-L1 COPYPOOL LTOCLASS102,400.0 76.1 Filling 00016-L1 TAPEPOOL LTOCLASS102,400.0 24.9 Filling 00022-L1 TAPEPOOL LTOCLASS205,063.7 84.3Full 00025-L1 TAPEPOOL LTOCLASS201,604.4 71.9Full 00027-L1 COPYPOOL LTOCLASS239,662.7 82.1Full 00029-L1 COPYPOOL LTOCLASS214,230.8 77.2Full 00030-L1 TAPEPOOL LTOCLASS215,340.7 76.3Full 00031-L1 TAPEPOOL LTOCLASS102,400.0 43.3 Filling 00033-L1 COPYPOOL LTOCLASS111,865.1 73.7 Filling 00038-L1 TAPEPOOL LTOCLASS208,595.1 71.6Full 00047-L1 COPYPOOL LTOCLASS173,673.4 92.8 Filling 00050-L1 TAPEPOOL LTOCLASS211,247.5 100.0Full 00057-L1 TAPEPOOL LTOCLASS241,950.5 85.2Full 00066-L1 COPYPOOL LTOCLASS214,408.9 77.8Full 00067-L1 COPYPOOL LTOCLASS205,609.1 95.8Full 00070-L1 TAPEPOOL LTOCLASS217,336.3 93.2Full 00095-L1 TAPEPOOL LTOCLASS159,527.3 83.4Full 00097-L1 TAPEPOOL LTOCLASS163,106.7 92.1Full 00100-L1 TAPEPOOL LTOCLASS211,595.7 85.7Full 00101-L1 COPYPOOL LTOCLASS178,355.2 81.8Full 00102-L1 COPYPOOL LTOCLASS161,291.2 93.3Full 00103-L1 COPYPOOL LTOCLASS211,708.7 91.3 Filling 00106-L1 TAPEPOOL LTOCLASS233,198.6 79.2Full 00107-L1 TAPEPOOL LTOCLASS224,637.1 80.9Full 00108-L1 COPYPOOL LTOCLASS 0.00.0 Empty 00110-L1 TAPEPOOL LTOCLASS221,950.0 84.1Full 00111-L1 COPYPOOL LTOCLASS210,298.6 99.9Full 00113-L1 COPYPOOL LTOCLASS242,915.3 89.4Full -Original Message- From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED] Behalf Of Copperfield Adams Sent: Wednesday, April 07, 2004 9:22 AM To: [EMAIL PROTECTED] Subject: Help needed to free slots in a 3583 library Hi all, I have a query regarding tape usage: Analysis: We currently have TSM 5.2 installed on a WIN2k Server platform backing up appx. 50 nodes to 2 disk pools and then migrating to LTO tapes in a 3583 library, one copy for offsite vault and one copy to remain onsite within the tape library. We have 60 available slots for LTO volumes as we leave the I/O drawer free to take volumes in and out of the library. We are using 100gb native LTO volumes. We have 3 nodes that are configured to backup using collocation. Problem: We are constantly running at full capacity within the library (always 59 Private volumes) leaving only one slot for scratch. Because we have 3 collocated nodes and produce a dbbackup everyday to go offsite we need a minimum of 5 free slots (assuming all other backed up data for other nodes does not exceed 100Gb). When I issue 'q eve * * begind=-1' to check the previous evenings backups I am usually shown that most nodes have completed but often have only 2 tapes to go offsite (inc. the dbbackup) suggesting that collocation is not happening. Aside from this, when I issue a script to check what space I am able to relaim from the onsite tapes (in order to free up some slots for scratch volumes) I am presented
Re: Help needed to free slots in a 3583 library
-Original Message- From: Copperfield Adams [mailto:[EMAIL PROTECTED] Sent: Wednesday, April 07, 2004 11:22 AM To: [EMAIL PROTECTED] Subject: Help needed to free slots in a 3583 library Hi all, I have a query regarding tape usage: Analysis: We currently have TSM 5.2 installed on a WIN2k Server platform backing up appx. 50 nodes to 2 disk pools and then migrating to LTO tapes in a 3583 library, one copy for offsite vault and one copy to remain onsite within the tape library. We have 60 available slots for LTO volumes as we leave the I/O drawer free to take volumes in and out of the library. We are using 100gb native LTO volumes. We have 3 nodes that are configured to backup using collocation. Problem: We are constantly running at full capacity within the library (always 59 Private volumes) leaving only one slot for scratch. Because we have 3 collocated nodes and produce a dbbackup everyday to go offsite we need a minimum of 5 free slots (assuming all other backed up data for other nodes does not exceed 100Gb). When I issue 'q eve * * begind=-1' to check the previous evenings backups I am usually shown that most nodes have completed but often have only 2 tapes to go offsite (inc. the dbbackup) suggesting that collocation is not happening. Aside from this, when I issue a script to check what space I am able to relaim from the onsite tapes (in order to free up some slots for scratch volumes) I am presented with the following (I have omitted the offsite copy LTOs): STGPOOL_NAME VOLUME_NAMEPCT_RECLAIM ACCESS -- -- --- -- BACKUP_TAPE000411L1 43.8 READWRITE BACKUP_TAPE000466L1 43.5 READWRITE BACKUP_TAPE000362L1 43.0 READWRITE BACKUP_TAPE000382L1 42.6 READWRITE BACKUP_TAPE000380L1 39.6 READWRITE BACKUP_TAPE000529L1 39.1 READWRITE BACKUP_TAPE000632L1 38.7 READWRITE BACKUP_TAPE000563L1 38.4 READWRITE BACKUP_TAPE000418L1 35.4 READWRITE BACKUP_TAPE000403L1 34.6 READWRITE BACKUP_TAPE000572L1 33.7 READWRITE BACKUP_TAPE000364L1 31.4 READWRITE BACKUP_TAPE000564L1 28.8 READWRITE BACKUP_TAPE000402L1 28.5 READWRITE BACKUP_TAPE000495L1 25.8 READWRITE BACKUP_TAPE000391L1 25.6 READWRITE BACKUP_TAPE000412L1 22.9 READWRITE BACKUP_TAPE000453L1 22.8 READWRITE BACKUP_TAPE000501L1 21.3 READWRITE BACKUP_TAPE000413L1 16.6 READWRITE BACKUP_TAPE000612L1 16.1 READWRITE BACKUP_TAPE000470L1 14.8 READWRITE BACKUP_TAPE000618L1 11.4 READWRITE BACKUP_TAPE000395L1 11.1 READWRITE BACKUP_TAPE000607L1 6.3 READWRITE BACKUP_TAPE000388L1 3.2 READWRITE BACKUP_TAPE000422L1 2.4 READWRITE BACKUP_TAPE000570L1 2.2 READWRITE BACKUP_TAPE000516L1 0.0 READWRITE BACKUP_TAPE_COL000463L1 44.7 READWRITE BACKUP_TAPE_COL000600L1 42.9 READWRITE BACKUP_TAPE_COL000575L1 41.4 READWRITE BACKUP_TAPE_COL000530L1 40.3 READWRITE BACKUP_TAPE_COL000540L1 37.7 READWRITE BACKUP_TAPE_COL000605L1 35.7 READWRITE BACKUP_TAPE_COL000417L1 34.7 READWRITE BACKUP_TAPE_COL000457L1 33.0 READWRITE BACKUP_TAPE_COL000437L1 32.4 READWRITE BACKUP_TAPE_COL000644L1 29.5 READWRITE BACKUP_TAPE_COL000415L1 28.4 READWRITE BACKUP_TAPE_COL000581L1 28.3 READWRITE BACKUP_TAPE_COL000583L1 28.3 READWRITE BACKUP_TAPE_COL000601L1 27.7 READWRITE BACKUP_TAPE_COL000452L1 26.3 READWRITE BACKUP_TAPE_COL000414L1 24.9 READWRITE BACKUP_TAPE_COL000464L1 23.1
Re: Help needed to free slots in a 3583 library
If these tapes are marked FULL, then the tapes ARE being filled efficiently. It's just that, as you said, your data is expiring at different rates. Because TSM doesn't expire files based on date, this is a natural side effect; tapes don't all free up at the same time. This is normal, and I've seen it with every TSM server I've worked on. If you set your reclamation threshold to 60, you can, over time, end up with an apparently infinite number of tapes sitting around with 59% free space. Your choices are (1) occasionally bite the bullet and do a lot of forced reclaims or MOVE DATAs (which is a waste of your time, which is a lot more expensive than a $45 LTO1 cartridge). (2) upgrade your robot capacity (as you said, in your case the best way to do that is to upgrade the drives cartridges) (3) GET RID OF SOME DATA. Deleting unused filespaces WILL immediately free up space on your other tapes. It may free some entirely, or send the %reclaimable up very high so that you can reclaim them quickly. The other thing you can do is review your management class retention periods. Are you keeping ALL data for the same number of versions/length of time? Can you change the management class of some directories (like the winnt directory) to keep fewer versions? It may help to issue q occ, and look at the LOGICAL SPACE OCCUPIED for each filespace. If it is noticeably larger than the physical drive, or if one is way out of whack with the others, you may be keeping more copies of the data on that drive than you need. Also, make sure you have EXCLUDED the TSM server storage pool and data base volumes (normally have a .dsm suffix) from the backups. If you don't find anything else you can get rid of, your management has a choice: Change the backup coverage requirements, or fork over the money for new drives and media. Hope that helps... Wanda Prather I/O, I/O, It's all about I/O -(me) -Original Message- From: Copperfield Adams [mailto:[EMAIL PROTECTED] Sent: Wednesday, April 07, 2004 11:22 AM To: [EMAIL PROTECTED] Subject: Help needed to free slots in a 3583 library Hi all, I have a query regarding tape usage: Analysis: We currently have TSM 5.2 installed on a WIN2k Server platform backing up appx. 50 nodes to 2 disk pools and then migrating to LTO tapes in a 3583 library, one copy for offsite vault and one copy to remain onsite within the tape library. We have 60 available slots for LTO volumes as we leave the I/O drawer free to take volumes in and out of the library. We are using 100gb native LTO volumes. We have 3 nodes that are configured to backup using collocation. Problem: We are constantly running at full capacity within the library (always 59 Private volumes) leaving only one slot for scratch. Because we have 3 collocated nodes and produce a dbbackup everyday to go offsite we need a minimum of 5 free slots (assuming all other backed up data for other nodes does not exceed 100Gb). When I issue 'q eve * * begind=-1' to check the previous evenings backups I am usually shown that most nodes have completed but often have only 2 tapes to go offsite (inc. the dbbackup) suggesting that collocation is not happening. Aside from this, when I issue a script to check what space I am able to relaim from the onsite tapes (in order to free up some slots for scratch volumes) I am presented with the following (I have omitted the offsite copy LTOs): STGPOOL_NAME VOLUME_NAMEPCT_RECLAIM ACCESS -- -- --- -- BACKUP_TAPE000411L1 43.8 READWRITE BACKUP_TAPE000466L1 43.5 READWRITE BACKUP_TAPE000362L1 43.0 READWRITE BACKUP_TAPE000382L1 42.6 READWRITE BACKUP_TAPE000380L1 39.6 READWRITE BACKUP_TAPE000529L1 39.1 READWRITE BACKUP_TAPE000632L1 38.7 READWRITE BACKUP_TAPE000563L1 38.4 READWRITE BACKUP_TAPE000418L1 35.4 READWRITE BACKUP_TAPE000403L1 34.6 READWRITE BACKUP_TAPE000572L1 33.7 READWRITE BACKUP_TAPE000364L1 31.4 READWRITE BACKUP_TAPE000564L1 28.8 READWRITE BACKUP_TAPE000402L1 28.5 READWRITE BACKUP_TAPE000495L1 25.8 READWRITE BACKUP_TAPE000391L1 25.6 READWRITE BACKUP_TAPE000412L1 22.9 READWRITE BACKUP_TAPE000453L1 22.8 READWRITE BACKUP_TAPE000501L1 21.3 READWRITE BACKUP_TAPE000413L1
Re: Help needed to free slots in a 3583 library
We had the exact same problem, this fixed it for us. http://www.storage.ibm.com/tape/lto/3584/index.html ;) Sorry, but it's the truth. Mark Bertrand -Original Message- From: Mike Bantz [mailto:[EMAIL PROTECTED] Sent: Wednesday, April 07, 2004 10:57 AM To: [EMAIL PROTECTED] Subject: Re: Help needed to free slots in a 3583 library I was in your same boat. It sucks. We have since turned colocation off since we're more of a backup shop, not into tons of restores. Also, we will leave the DRM tapes in the library to get filled more rather than sending them offsite every day (we do not have daily tape delivery. Yet.) We currently have our reclamation set to 30% to bump up that utilization, but we run that on two admin sechdules. Here's an example: At 12:00, we have an admin schedule that issues update stg copypool reclaim=30 At 16:00, we have an admin schedule that issues update stg copypool reclaim=100 This is what our q vol shows (keep in mind that a whole ton of these are scratch tapes right now) As you can see, the tape utilization is a lot higher. 1-L1 COPYPOOL LTOCLASS205,859.4 97.3Full 2-L1 COPYPOOL LTOCLASS106,113.6 86.0 Filling 3-L1 TAPEPOOL LTOCLASS201,242.6 92.2Full 6-L1 TAPEPOOL LTOCLASS216,692.6 99.9Full 7-L1 COPYPOOL LTOCLASS213,599.4 100.0Full 8-L1 COPYPOOL LTOCLASS201,831.4 83.1Full 00010-L1 COPYPOOL LTOCLASS 0.00.0 Empty 00014-L1 COPYPOOL LTOCLASS178,820.2 87.3 Filling 00015-L1 COPYPOOL LTOCLASS102,400.0 76.1 Filling 00016-L1 TAPEPOOL LTOCLASS102,400.0 24.9 Filling 00022-L1 TAPEPOOL LTOCLASS205,063.7 84.3Full 00025-L1 TAPEPOOL LTOCLASS201,604.4 71.9Full 00027-L1 COPYPOOL LTOCLASS239,662.7 82.1Full 00029-L1 COPYPOOL LTOCLASS214,230.8 77.2Full 00030-L1 TAPEPOOL LTOCLASS215,340.7 76.3Full 00031-L1 TAPEPOOL LTOCLASS102,400.0 43.3 Filling 00033-L1 COPYPOOL LTOCLASS111,865.1 73.7 Filling 00038-L1 TAPEPOOL LTOCLASS208,595.1 71.6Full 00047-L1 COPYPOOL LTOCLASS173,673.4 92.8 Filling 00050-L1 TAPEPOOL LTOCLASS211,247.5 100.0Full 00057-L1 TAPEPOOL LTOCLASS241,950.5 85.2Full 00066-L1 COPYPOOL LTOCLASS214,408.9 77.8Full 00067-L1 COPYPOOL LTOCLASS205,609.1 95.8Full 00070-L1 TAPEPOOL LTOCLASS217,336.3 93.2Full 00095-L1 TAPEPOOL LTOCLASS159,527.3 83.4Full 00097-L1 TAPEPOOL LTOCLASS163,106.7 92.1Full 00100-L1 TAPEPOOL LTOCLASS211,595.7 85.7Full 00101-L1 COPYPOOL LTOCLASS178,355.2 81.8Full 00102-L1 COPYPOOL LTOCLASS161,291.2 93.3Full 00103-L1 COPYPOOL LTOCLASS211,708.7 91.3 Filling 00106-L1 TAPEPOOL LTOCLASS233,198.6 79.2Full 00107-L1 TAPEPOOL LTOCLASS224,637.1 80.9Full 00108-L1 COPYPOOL LTOCLASS 0.00.0 Empty 00110-L1 TAPEPOOL LTOCLASS221,950.0 84.1Full 00111-L1 COPYPOOL LTOCLASS210,298.6 99.9Full 00113-L1 COPYPOOL LTOCLASS242,915.3 89.4Full -Original Message- From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED] Behalf Of Copperfield Adams Sent: Wednesday, April 07, 2004 9:22 AM To: [EMAIL PROTECTED] Subject: Help needed to free slots in a 3583 library Hi all, I have a query regarding tape usage: Analysis: We currently have TSM 5.2 installed on a WIN2k Server platform backing up appx. 50 nodes to 2 disk pools and then migrating to LTO tapes in a 3583 library, one copy for offsite vault and one copy to remain onsite within the tape library. We have 60 available slots for LTO volumes as we leave the I/O drawer free to take volumes in and out of the library. We are using 100gb native LTO volumes. We have 3 nodes that are configured to backup using collocation. Problem: We are constantly running at full capacity within the library (always 59 Private volumes) leaving only one slot for scratch. Because we have 3 collocated nodes and produce a dbbackup everyday to go offsite we need a minimum of 5 free slots (assuming all other backed up data for other nodes does not exceed 100Gb). When I issue 'q eve * * begind=-1' to check the previous
Re: Help needed to free slots in a 3583 library
You haven't showed if the volumes below are in a Filling of Full status. If they are all in a filling status the problem may be that you have the maxscratch parameter set too high for your tape storage pools. What value is that set to? -Original Message- From: Copperfield Adams [mailto:[EMAIL PROTECTED] Sent: April 7, 2004 10:22 AM To: [EMAIL PROTECTED] Subject: Help needed to free slots in a 3583 library Hi all, I have a query regarding tape usage: Analysis: We currently have TSM 5.2 installed on a WIN2k Server platform backing up appx. 50 nodes to 2 disk pools and then migrating to LTO tapes in a 3583 library, one copy for offsite vault and one copy to remain onsite within the tape library. We have 60 available slots for LTO volumes as we leave the I/O drawer free to take volumes in and out of the library. We are using 100gb native LTO volumes. We have 3 nodes that are configured to backup using collocation. Problem: We are constantly running at full capacity within the library (always 59 Private volumes) leaving only one slot for scratch. Because we have 3 collocated nodes and produce a dbbackup everyday to go offsite we need a minimum of 5 free slots (assuming all other backed up data for other nodes does not exceed 100Gb). When I issue 'q eve * * begind=-1' to check the previous evenings backups I am usually shown that most nodes have completed but often have only 2 tapes to go offsite (inc. the dbbackup) suggesting that collocation is not happening. Aside from this, when I issue a script to check what space I am able to relaim from the onsite tapes (in order to free up some slots for scratch volumes) I am presented with the following (I have omitted the offsite copy LTOs): STGPOOL_NAME VOLUME_NAMEPCT_RECLAIM ACCESS -- -- --- -- BACKUP_TAPE000411L1 43.8 READWRITE BACKUP_TAPE000466L1 43.5 READWRITE BACKUP_TAPE000362L1 43.0 READWRITE BACKUP_TAPE000382L1 42.6 READWRITE BACKUP_TAPE000380L1 39.6 READWRITE BACKUP_TAPE000529L1 39.1 READWRITE BACKUP_TAPE000632L1 38.7 READWRITE BACKUP_TAPE000563L1 38.4 READWRITE BACKUP_TAPE000418L1 35.4 READWRITE BACKUP_TAPE000403L1 34.6 READWRITE BACKUP_TAPE000572L1 33.7 READWRITE BACKUP_TAPE000364L1 31.4 READWRITE BACKUP_TAPE000564L1 28.8 READWRITE BACKUP_TAPE000402L1 28.5 READWRITE BACKUP_TAPE000495L1 25.8 READWRITE BACKUP_TAPE000391L1 25.6 READWRITE BACKUP_TAPE000412L1 22.9 READWRITE BACKUP_TAPE000453L1 22.8 READWRITE BACKUP_TAPE000501L1 21.3 READWRITE BACKUP_TAPE000413L1 16.6 READWRITE BACKUP_TAPE000612L1 16.1 READWRITE BACKUP_TAPE000470L1 14.8 READWRITE BACKUP_TAPE000618L1 11.4 READWRITE BACKUP_TAPE000395L1 11.1 READWRITE BACKUP_TAPE000607L1 6.3 READWRITE BACKUP_TAPE000388L1 3.2 READWRITE BACKUP_TAPE000422L1 2.4 READWRITE BACKUP_TAPE000570L1 2.2 READWRITE BACKUP_TAPE000516L1 0.0 READWRITE BACKUP_TAPE_COL000463L1 44.7 READWRITE BACKUP_TAPE_COL000600L1 42.9 READWRITE BACKUP_TAPE_COL000575L1 41.4 READWRITE BACKUP_TAPE_COL000530L1 40.3 READWRITE BACKUP_TAPE_COL000540L1 37.7 READWRITE BACKUP_TAPE_COL000605L1 35.7 READWRITE BACKUP_TAPE_COL000417L1 34.7 READWRITE BACKUP_TAPE_COL000457L1 33.0 READWRITE BACKUP_TAPE_COL000437L1 32.4 READWRITE BACKUP_TAPE_COL000644L1 29.5 READWRITE BACKUP_TAPE_COL000415L1 28.4 READWRITE BACKUP_TAPE_COL000581L1 28.3 READWRITE BACKUP_TAPE_COL000583L1 28.3 READWRITE BACKUP_TAPE_COL000601L1
script help needed please
Hi all, Does anyone have a script I could run on my TSM server (AIX) that will supply me with a list of files backed up per domain,node name and management class? I got close with this one, but can't get the list of files. select node_name,backup_date from backups where domain_name='PRODSQL' and class_name='WEEKLY' and type='FILE' order by node_name NODE_NAME BACKUP_DATE -- -- ES08 2001-09-19 18:42:01.00 ES08 2001-09-20 19:11:43.00 Thanks in advance. Paulla Brukner
Re: help needed desperately - reinstall TSM client v5.1
Thank you, Arnaud! you are right. I did suspect that my OS level may not match the linked ftp file forwarded by our backup server manager. I switched from 64 bit to the 32 bit TSM client to install to my win2000 server, it succeeded. (Next time, I will keep the old version while upgrading since I have learnt a lot in the past couple of days.) However the error ANS1063E Invalid path specification still there. I am still tackling this problem. My question: Is domain name case sensitive? Where can I find the domain name syntax specification? I'd like to take this chance to thank Richard too. Your response did help me to think actively and finally trace down to the cause. This group is great! Thank you again! Lan Lan Wu-Cavener PennState
Re: help needed desperately - reinstall TSM client v5.1
You don't provide the scenario under which the problem occurs, so it is difficult to give you an answer. If you are using the scheduler service to perform this operation, then make sure you are using an account that has access to network resources. The local system account does not have access to network resources. Maybe that is the problem. But without more detailed information about *exactly* what you are doing, how you are doing it, how your environment is configured, etc., it is difficult to provide a more thorough answer. Regards, Andy Andy Raibeck IBM Software Group Tivoli Storage Manager Client Development Internal Notes e-mail: Andrew Raibeck/Tucson/[EMAIL PROTECTED] Internet e-mail: [EMAIL PROTECTED] The only dumb question is the one that goes unasked. The command line is your friend. Good enough is the enemy of excellence. Lan Wu-Cavener [EMAIL PROTECTED] Sent by: ADSM: Dist Stor Manager [EMAIL PROTECTED] 10/30/2003 09:06 Please respond to ADSM: Dist Stor Manager To: [EMAIL PROTECTED] cc: Subject:Re: help needed desperately - reinstall TSM client v5.1 Thank you, Arnaud! you are right. I did suspect that my OS level may not match the linked ftp file forwarded by our backup server manager. I switched from 64 bit to the 32 bit TSM client to install to my win2000 server, it succeeded. (Next time, I will keep the old version while upgrading since I have learnt a lot in the past couple of days.) However the error ANS1063E Invalid path specification still there. I am still tackling this problem. My question: Is domain name case sensitive? Where can I find the domain name syntax specification? I'd like to take this chance to thank Richard too. Your response did help me to think actively and finally trace down to the cause. This group is great! Thank you again! Lan Lan Wu-Cavener PennState
Re: help needed desperately - reinstall TSM client v5.1
Hi, I am using a scheduler service to run the backup daily. The TSM resides on the window2000 server, which is also a domain controller. The two domains that I want to back up are also on the two partitions of the hard drives of the same machine. So there should not have any access problem. I am suspecting the syntax of the domain name since I am using an old opt file (I didn't create this one). Our system administrator was let go several months ago. I am a programmer and do not knowing much about the system admin. Now I have to do some admin. job when it is necessary, got to backup the things you worked one. Sorry for not being clear when posting my question. Didn't know that there is a huge complicated world of TSM. Thanks! Lan At 09:16 AM 10/30/2003 -0700, you wrote: You don't provide the scenario under which the problem occurs, so it is difficult to give you an answer. If you are using the scheduler service to perform this operation, then make sure you are using an account that has access to network resources. The local system account does not have access to network resources. Maybe that is the problem. But without more detailed information about *exactly* what you are doing, how you are doing it, how your environment is configured, etc., it is difficult to provide a more thorough answer. Regards, Andy Andy Raibeck IBM Software Group Tivoli Storage Manager Client Development Internal Notes e-mail: Andrew Raibeck/Tucson/[EMAIL PROTECTED] Internet e-mail: [EMAIL PROTECTED] The only dumb question is the one that goes unasked. The command line is your friend. Good enough is the enemy of excellence. Lan Wu-Cavener [EMAIL PROTECTED] Sent by: ADSM: Dist Stor Manager [EMAIL PROTECTED] 10/30/2003 09:06 Please respond to ADSM: Dist Stor Manager To: [EMAIL PROTECTED] cc: Subject:Re: help needed desperately - reinstall TSM client v5.1 Thank you, Arnaud! you are right. I did suspect that my OS level may not match the linked ftp file forwarded by our backup server manager. I switched from 64 bit to the 32 bit TSM client to install to my win2000 server, it succeeded. (Next time, I will keep the old version while upgrading since I have learnt a lot in the past couple of days.) However the error ANS1063E Invalid path specification still there. I am still tackling this problem. My question: Is domain name case sensitive? Where can I find the domain name syntax specification? I'd like to take this chance to thank Richard too. Your response did help me to think actively and finally trace down to the cause. This group is great! Thank you again! Lan Lan Wu-Cavener PennState Lan Wu-Cavener Dept. of Landscape Architecture
help needed desperately - reinstall TSM client v5.1
Hi, I am a newbie here. Just join the list and sent the message but didn't shown on the list. (must have done wrong) I am sending it again. University TSM server was updated to 5.1.6 several months ago, I noticed about a month ago that our client v4.2 didn't work right.(Don't really know how long it had been malfunctioning, log file was overwritten.) The dsmsched.log message is Sending of object '\\imlab-win\appleshare' failed 10/23/2003 13:03:40 ANS1063E Invalid path specification 10/23/2003 13:03:40 ANS1228E Sending of object '\\imlab-win\wwwroot' failed 10/23/2003 13:03:40 ANS1063E Invalid path specification 10/23/2003 13:03:44 Scheduled event '1300' completed successfully. We could not figure what was wrong. and decided to upgrade the client. I am upgrading the TSM client from 4.2 to 5.2. As recommended in the README file, I stopped the scheduler from the system. Then removed the scheduler through TSM utility menu. And then uninstalled the old version of TSM from control panel, add/remove program panel. Then downloaded new version. The installShield Wizard was interrupted and installation failed. the message I got is as follows: The wizard was interrupted before Tivoli could be completely installed. your system has not been modified. To complete installation at another time I also tried to run the setup after I disable the firewall. It failed with the same message. Does anyone known what was wrong? Is there anything(component) else that I need to remove before installation? Thanks in advance for any advice! Lan Lan Wu-Cavener PennState
Re: Help needed using seagate STT20000A
- (on mbox.infotel.bg) email-body was scanned and no virus found - As your drive is not supported by TSM driver, you should *not* use it against the drive. The problem is in the command define path STEVEOIMAGE2_SERVER1 GENDRV_0.0.0 srctype=server desttype=drive device=mt1.0.0.0 library=GENLIB1 You should use ... device=\\.\Tape0 ... instead. When you try to address the drive as mt1.0.0.0 you trying to do via TSM device driver. If you do it addressing it as \\.\Tape0 it will be via native driver. If there are no other drives, you can even avoid to install TSM device driver. Zlatko Krastev IT Consultant Steve Ochani [EMAIL PROTECTED] Sent by: ADSM: Dist Stor Manager [EMAIL PROTECTED] 17.10.2003 23:04 Please respond to ADSM: Dist Stor Manager To: [EMAIL PROTECTED] cc: Subject:Re: Help needed using seagate STT2A Hi again, Yes \\.\Tape0 is listed but when i try to pull up it's properties I get the following error http://www.steveo.us/tivoli/7.jpg I don't know if that is because I'm not useing ibm's driver I don't have any other programs on at the time and the segate backup software service is off. On 17 Oct 2003 at 15:15, alkina wrote: If u are using default windows driver.In that case give \\ .\ tape0 tape0 is the device detected by windows . Regards Alkina l ADSM: Dist Stor Manager wrote: Steve, In the TSM MC, under device information, were you able to see tape0 in the Device Name colume? Just wanna make sure that the device is controlled by the native driver. Hunny Kershaw Steve Ochani To: [EMAIL PROTECTED] Sent by: ADSM: cc: Dist Stor Subject: Re: Help needed using seagate STT2A Manager .EDUgt; 10/16/2003 02:11 PM Please respond to ADSM: Dist Stor Manager Hello, On 16 Oct 2003 at 8:43, Hunny Kershaw wrote: gt; Steve, gt; gt; The TSM device driver does not support drives with device ID STT2A. gt; You will need the Windows native driver for this device. That's what I tried to use first. And I got the following error when trying to do the initial device config. Server Version 5, Release 1, Level 5.0 Server date/time: 10/13/2003 17:27:29 Last access: 10/13/2003 17:25:23 ANS8000I Server command: 'define library GENLIB1 libtype=manual' ANR8400I Library GENLIB1 defined. ANS8000I Server command: 'define drive GENLIB1 GENDRV_0.0.0' ANR8404I Drive GENDRV_0.0.0 defined in library GENLIB1. ANS8000I Server command: 'define path STEVEOIMAGE2_SERVER1 GENDRV_0.0.0 srctype=server desttype=drive device=mt1.0.0.0 library=GENLIB1' ANR8420E DEFINE PATH: An I/O error occurred while accessing drive GENDRV_0.0.0. ANS8001I Return code 15. ANS8000I Server command: 'define devc GENCLASS1 devtype=GENERICTAPE library=GENLIB1' ANR2203I Device class GENCLASS1 defined. ANS8000I Server command: 'define stgpool GENPOOL1 GENCLASS1 maxscratch=500 dataformat=NATIVE' ANR2200I Storage pool GENPOOL1 defined (device class GENCLASS1). ANS8002I Highest return code was 15. So how do I use the device? gt; gt; Regards, gt; gt; Hunny Kershaw gt; gt; gt; gt; gt; Steve Ochani gt; To: [EMAIL PROTECTED] gt; Sent by: ADSM: cc: gt; Dist Stor Subject: Re: Help needed using seagate STT2A gt; Manager gt; gt; .EDUgt; gt; gt; gt; 10/15/2003 04:33 gt; PM gt; Please respond to gt; ADSM: Dist Stor gt; Manager gt; gt; gt; gt; gt; gt; gt; Thanks for the reply, gt; gt; I tried what you suggested, uninstalled the TSM device driver (via gt; add/remove gt; programs). Checked ms driver with backup utility from seagate, backup works gt; fine. gt; gt; Installed TSM device driver from CD. gt; Went to device manager, update drivers -- windows could not find the ibm gt; device driver, gt; even had it scan the CD (there is no INF file for the adsmscsi.sys). So I gt; tried forcefully gt; installing it by modifying the winnt/inf/tape.inf file and put in an entry gt; for IBM and for the gt; admscsi.sys file. It seemed to install fine, rebooted, check the driver gt; property and it gt; seems fine, lists ibm driver as shown here gt; gt; http://www.steveo.us/tivoli/4.jpg gt; gt; But now when I go into TSM console and try to start the driver I get the gt; error gt; gt; Unable to start the TSM Device Driver. gt; Reason: The system cannot find the device specified. gt; gt; as shown here gt; gt; http://www.steveo.us/tivoli/5.jpg gt; gt; I then tried in the driver properties, putting the device over to the left gt; column Devices gt; controlled by TSM Device Driver, rebooted , but it put the device back to gt; the column gt; Devices controlled by Native Device Drivers gt; gt; as shown here gt; gt; http://www.steveo.us/tivoli/6.jpg gt; gt; So how do I properly install this driver if there is no inf file for it. gt; gt; I
Re: Help needed using seagate STT20000A
If u are using default windows driver.In that case give \\ .\ tape0 tape0 is the device detected by windows . Regards Alkina l ADSM: Dist Stor Manager wrote: Steve, In the TSM MC, under device information, were you able to see tape0 in the Device Name colume? Just wanna make sure that the device is controlled by the native driver. Hunny Kershaw Steve Ochani To: [EMAIL PROTECTED] Sent by: ADSM: cc: Dist Stor Subject: Re: Help needed using seagate STT2A Manager .EDUgt; 10/16/2003 02:11 PM Please respond to ADSM: Dist Stor Manager Hello, On 16 Oct 2003 at 8:43, Hunny Kershaw wrote: gt; Steve, gt; gt; The TSM device driver does not support drives with device ID STT2A. gt; You will need the Windows native driver for this device. That's what I tried to use first. And I got the following error when trying to do the initial device config. Server Version 5, Release 1, Level 5.0 Server date/time: 10/13/2003 17:27:29 Last access: 10/13/2003 17:25:23 ANS8000I Server command: 'define library GENLIB1 libtype=manual' ANR8400I Library GENLIB1 defined. ANS8000I Server command: 'define drive GENLIB1 GENDRV_0.0.0' ANR8404I Drive GENDRV_0.0.0 defined in library GENLIB1. ANS8000I Server command: 'define path STEVEOIMAGE2_SERVER1 GENDRV_0.0.0 srctype=server desttype=drive device=mt1.0.0.0 library=GENLIB1' ANR8420E DEFINE PATH: An I/O error occurred while accessing drive GENDRV_0.0.0. ANS8001I Return code 15. ANS8000I Server command: 'define devc GENCLASS1 devtype=GENERICTAPE library=GENLIB1' ANR2203I Device class GENCLASS1 defined. ANS8000I Server command: 'define stgpool GENPOOL1 GENCLASS1 maxscratch=500 dataformat=NATIVE' ANR2200I Storage pool GENPOOL1 defined (device class GENCLASS1). ANS8002I Highest return code was 15. So how do I use the device? gt; gt; Regards, gt; gt; Hunny Kershaw gt; gt; gt; gt; gt; Steve Ochani gt; To: [EMAIL PROTECTED] gt; Sent by: ADSM: cc: gt; Dist Stor Subject: Re: Help needed using seagate STT2A gt; Manager gt; gt; .EDUgt; gt; gt; gt; 10/15/2003 04:33 gt; PM gt; Please respond to gt; ADSM: Dist Stor gt; Manager gt; gt; gt; gt; gt; gt; gt; Thanks for the reply, gt; gt; I tried what you suggested, uninstalled the TSM device driver (via gt; add/remove gt; programs). Checked ms driver with backup utility from seagate, backup works gt; fine. gt; gt; Installed TSM device driver from CD. gt; Went to device manager, update drivers -- windows could not find the ibm gt; device driver, gt; even had it scan the CD (there is no INF file for the adsmscsi.sys). So I gt; tried forcefully gt; installing it by modifying the winnt/inf/tape.inf file and put in an entry gt; for IBM and for the gt; admscsi.sys file. It seemed to install fine, rebooted, check the driver gt; property and it gt; seems fine, lists ibm driver as shown here gt; gt; http://www.steveo.us/tivoli/4.jpg gt; gt; But now when I go into TSM console and try to start the driver I get the gt; error gt; gt; Unable to start the TSM Device Driver. gt; Reason: The system cannot find the device specified. gt; gt; as shown here gt; gt; http://www.steveo.us/tivoli/5.jpg gt; gt; I then tried in the driver properties, putting the device over to the left gt; column Devices gt; controlled by TSM Device Driver, rebooted , but it put the device back to gt; the column gt; Devices controlled by Native Device Drivers gt; gt; as shown here gt; gt; http://www.steveo.us/tivoli/6.jpg gt; gt; So how do I properly install this driver if there is no inf file for it. gt; gt; I also see in the docs that in windows 2000 that the tsm device drivers are gt; not needed. gt; gt; gt; Thanks for any help gt; gt; gt; gt; On 15 Oct 2003 at 12:00, alkina wrote: gt; gt; gt; gt; gt; gt; gt; Dear Mr. steeve , gt; gt; gt; gt; This type of error i mean i/o error comes when u are using the wrong gt; device name,or device is not gt; gt; properly configured.If these are ok please try: gt; gt; 1.Uninstall Previously installed TSM device driver. gt; gt; 2. Now install the seagate driver at o.s level and try local backup thru gt; win2k.If so tape is gt; gt; communicatibg properly. gt; gt; 3. Now install TSM device driver . gt; gt; 4.Now go to o.s level ,go to manage and tape drives.Here u can see ur gt; tapes drive.This is using gt; gt; windows driver.Now update the driver and u will be prompted two gt; drivers(one from seagate and gt; gt; other from IBM TSM ).Choose IBM TSM DEVICE driver. gt; gt; 5.From the TSM managment console verify that TSM DEVICE DRIVER is RUNNING gt; if not start gt; gt; it. gt; gt; 6.Now delete old devc,drive etc. and define gt; allagain(libr,drive,path,devc,stg etc.) gt; gt; gt; gt; Thanks and Regards gt; gt; Alkina l gt; gt; India gt; gt; gt; gt; gt; gt; [EMAIL PROTECTED] wrote: gt; gt; gt; gt; gt; gt; Hello all, gt; gt; gt; gt; I have installed TSM server (and client) 5.1 on win2k pro, service gt; pack 4 + all updates. gt; gt; gt; gt; This machine has a new Seagate tapestor travan 20 drive
Re: Help needed using seagate STT20000A
Hi again, Yes \\.\Tape0 is listed but when i try to pull up it's properties I get the following error http://www.steveo.us/tivoli/7.jpg I don't know if that is because I'm not useing ibm's driver I don't have any other programs on at the time and the segate backup software service is off. On 17 Oct 2003 at 15:15, alkina wrote: If u are using default windows driver.In that case give \\ .\ tape0 tape0 is the device detected by windows . Regards Alkina l ADSM: Dist Stor Manager wrote: Steve, In the TSM MC, under device information, were you able to see tape0 in the Device Name colume? Just wanna make sure that the device is controlled by the native driver. Hunny Kershaw Steve Ochani To: [EMAIL PROTECTED] Sent by: ADSM: cc: Dist Stor Subject: Re: Help needed using seagate STT2A Manager .EDUgt; 10/16/2003 02:11 PM Please respond to ADSM: Dist Stor Manager Hello, On 16 Oct 2003 at 8:43, Hunny Kershaw wrote: gt; Steve, gt; gt; The TSM device driver does not support drives with device ID STT2A. gt; You will need the Windows native driver for this device. That's what I tried to use first. And I got the following error when trying to do the initial device config. Server Version 5, Release 1, Level 5.0 Server date/time: 10/13/2003 17:27:29 Last access: 10/13/2003 17:25:23 ANS8000I Server command: 'define library GENLIB1 libtype=manual' ANR8400I Library GENLIB1 defined. ANS8000I Server command: 'define drive GENLIB1 GENDRV_0.0.0' ANR8404I Drive GENDRV_0.0.0 defined in library GENLIB1. ANS8000I Server command: 'define path STEVEOIMAGE2_SERVER1 GENDRV_0.0.0 srctype=server desttype=drive device=mt1.0.0.0 library=GENLIB1' ANR8420E DEFINE PATH: An I/O error occurred while accessing drive GENDRV_0.0.0. ANS8001I Return code 15. ANS8000I Server command: 'define devc GENCLASS1 devtype=GENERICTAPE library=GENLIB1' ANR2203I Device class GENCLASS1 defined. ANS8000I Server command: 'define stgpool GENPOOL1 GENCLASS1 maxscratch=500 dataformat=NATIVE' ANR2200I Storage pool GENPOOL1 defined (device class GENCLASS1). ANS8002I Highest return code was 15. So how do I use the device? gt; gt; Regards, gt; gt; Hunny Kershaw gt; gt; gt; gt; gt; Steve Ochani gt; To: [EMAIL PROTECTED] gt; Sent by: ADSM: cc: gt; Dist Stor Subject: Re: Help needed using seagate STT2A gt; Manager gt; gt; .EDUgt; gt; gt; gt; 10/15/2003 04:33 gt; PM gt; Please respond to gt; ADSM: Dist Stor gt; Manager gt; gt; gt; gt; gt; gt; gt; Thanks for the reply, gt; gt; I tried what you suggested, uninstalled the TSM device driver (via gt; add/remove gt; programs). Checked ms driver with backup utility from seagate, backup works gt; fine. gt; gt; Installed TSM device driver from CD. gt; Went to device manager, update drivers -- windows could not find the ibm gt; device driver, gt; even had it scan the CD (there is no INF file for the adsmscsi.sys). So I gt; tried forcefully gt; installing it by modifying the winnt/inf/tape.inf file and put in an entry gt; for IBM and for the gt; admscsi.sys file. It seemed to install fine, rebooted, check the driver gt; property and it gt; seems fine, lists ibm driver as shown here gt; gt; http://www.steveo.us/tivoli/4.jpg gt; gt; But now when I go into TSM console and try to start the driver I get the gt; error gt; gt; Unable to start the TSM Device Driver. gt; Reason: The system cannot find the device specified. gt; gt; as shown here gt; gt; http://www.steveo.us/tivoli/5.jpg gt; gt; I then tried in the driver properties, putting the device over to the left gt; column Devices gt; controlled by TSM Device Driver, rebooted , but it put the device back to gt; the column gt; Devices controlled by Native Device Drivers gt; gt; as shown here gt; gt; http://www.steveo.us/tivoli/6.jpg gt; gt; So how do I properly install this driver if there is no inf file for it. gt; gt; I also see in the docs that in windows 2000 that the tsm device drivers are gt; not needed. gt; gt; gt; Thanks for any help gt; gt; gt; gt; On 15 Oct 2003 at 12:00, alkina wrote: gt; gt; gt; gt; gt; gt; gt; Dear Mr. steeve , gt; gt; gt; gt; This type of error i mean i/o error comes when u are using the wrong gt; device name,or device is not gt; gt; properly configured.If these are ok please try: gt; gt; 1.Uninstall Previously installed TSM device driver. gt; gt; 2. Now install the seagate driver at o.s level and try local backup thru gt; win2k.If so tape is gt; gt; communicatibg properly. gt; gt; 3. Now install TSM device driver . gt; gt; 4.Now go to o.s level ,go to manage and tape drives.Here u can see ur gt; tapes drive.This is using gt; gt; windows driver.Now update the driver and u will be prompted two gt; drivers(one from seagate and gt; gt; other from IBM TSM ).Choose IBM TSM DEVICE driver. gt; gt; 5.From the TSM managment console verify
Re: Help needed using seagate STT20000A
Steve, The TSM device driver does not support drives with device ID STT2A. You will need the Windows native driver for this device. Regards, Hunny Kershaw Steve Ochani [EMAIL PROTECTED]To: [EMAIL PROTECTED] Sent by: ADSM: cc: Dist StorSubject: Re: Help needed using seagate STT2A Manager [EMAIL PROTECTED] .EDU 10/15/2003 04:33 PM Please respond to ADSM: Dist Stor Manager Thanks for the reply, I tried what you suggested, uninstalled the TSM device driver (via add/remove programs). Checked ms driver with backup utility from seagate, backup works fine. Installed TSM device driver from CD. Went to device manager, update drivers -- windows could not find the ibm device driver, even had it scan the CD (there is no INF file for the adsmscsi.sys). So I tried forcefully installing it by modifying the winnt/inf/tape.inf file and put in an entry for IBM and for the admscsi.sys file. It seemed to install fine, rebooted, check the driver property and it seems fine, lists ibm driver as shown here http://www.steveo.us/tivoli/4.jpg But now when I go into TSM console and try to start the driver I get the error Unable to start the TSM Device Driver. Reason: The system cannot find the device specified. as shown here http://www.steveo.us/tivoli/5.jpg I then tried in the driver properties, putting the device over to the left column Devices controlled by TSM Device Driver, rebooted , but it put the device back to the column Devices controlled by Native Device Drivers as shown here http://www.steveo.us/tivoli/6.jpg So how do I properly install this driver if there is no inf file for it. I also see in the docs that in windows 2000 that the tsm device drivers are not needed. Thanks for any help On 15 Oct 2003 at 12:00, alkina wrote: Dear Mr. steeve , This type of error i mean i/o error comes when u are using the wrong device name,or device is not properly configured.If these are ok please try: 1.Uninstall Previously installed TSM device driver. 2. Now install the seagate driver at o.s level and try local backup thru win2k.If so tape is communicatibg properly. 3. Now install TSM device driver . 4.Now go to o.s level ,go to manage and tape drives.Here u can see ur tapes drive.This is using windows driver.Now update the driver and u will be prompted two drivers(one from seagate and other from IBM TSM ).Choose IBM TSM DEVICE driver. 5.From the TSM managment console verify that TSM DEVICE DRIVER is RUNNING if not start it. 6.Now delete old devc,drive etc. and define allagain(libr,drive,path,devc,stg etc.) Thanks and Regards Alkina l India [EMAIL PROTECTED] wrote: Hello all, I have installed TSM server (and client) 5.1 on win2k pro, service pack 4 + all updates. This machine has a new Seagate tapestor travan 20 drive (which I've tested with the seagate software to do a backup and it works fine) After install of TSM server completes and I run the management console it's initial setup wizard runs and during the devices install part it detects my drive as mt1.0.0.0, I check the device in list to use it, click next and I get the error Failed to issue a command to the server, click OK to see why. I click ok and I get the following. erver Version 5, Release 1, Level 5.0 Server date/time: 10/13/2003 17:27:29 Last access: 10/13/2003 17:25:23 ANS8000I Server command: 'define library GENLIB1 libtype=manual' ANR8400I Library GENLIB1 defined. ANS8000I Server command: 'define dri! ve GENLIB1 GENDRV_0.0.0' ANR8404I Drive GENDRV_0.0.0 defined in library GENLIB1. ANS8000I Server command: 'define path STEVEOIMAGE2_SERVER1 GENDRV_0.0.0 srctype=server desttype=drive device=mt1.0.0.0 library=GENLIB1' ANR8420E DEFINE PATH: An I/O error occurred while accessing drive GENDRV_0.0.0. ANS8001I Return code 15. ANS8000I Server command: 'define devc GENCLASS1
Re: Help needed using seagate STT20000A
Hello, On 16 Oct 2003 at 8:43, Hunny Kershaw wrote: Steve, The TSM device driver does not support drives with device ID STT2A. You will need the Windows native driver for this device. That's what I tried to use first. And I got the following error when trying to do the initial device config. Server Version 5, Release 1, Level 5.0 Server date/time: 10/13/2003 17:27:29 Last access: 10/13/2003 17:25:23 ANS8000I Server command: 'define library GENLIB1 libtype=manual' ANR8400I Library GENLIB1 defined. ANS8000I Server command: 'define drive GENLIB1 GENDRV_0.0.0' ANR8404I Drive GENDRV_0.0.0 defined in library GENLIB1. ANS8000I Server command: 'define path STEVEOIMAGE2_SERVER1 GENDRV_0.0.0 srctype=server desttype=drive device=mt1.0.0.0 library=GENLIB1' ANR8420E DEFINE PATH: An I/O error occurred while accessing drive GENDRV_0.0.0. ANS8001I Return code 15. ANS8000I Server command: 'define devc GENCLASS1 devtype=GENERICTAPE library=GENLIB1' ANR2203I Device class GENCLASS1 defined. ANS8000I Server command: 'define stgpool GENPOOL1 GENCLASS1 maxscratch=500 dataformat=NATIVE' ANR2200I Storage pool GENPOOL1 defined (device class GENCLASS1). ANS8002I Highest return code was 15. So how do I use the device? Regards, Hunny Kershaw Steve Ochani [EMAIL PROTECTED]To: [EMAIL PROTECTED] Sent by: ADSM: cc: Dist StorSubject: Re: Help needed using seagate STT2A Manager [EMAIL PROTECTED] .EDU 10/15/2003 04:33 PM Please respond to ADSM: Dist Stor Manager Thanks for the reply, I tried what you suggested, uninstalled the TSM device driver (via add/remove programs). Checked ms driver with backup utility from seagate, backup works fine. Installed TSM device driver from CD. Went to device manager, update drivers -- windows could not find the ibm device driver, even had it scan the CD (there is no INF file for the adsmscsi.sys). So I tried forcefully installing it by modifying the winnt/inf/tape.inf file and put in an entry for IBM and for the admscsi.sys file. It seemed to install fine, rebooted, check the driver property and it seems fine, lists ibm driver as shown here http://www.steveo.us/tivoli/4.jpg But now when I go into TSM console and try to start the driver I get the error Unable to start the TSM Device Driver. Reason: The system cannot find the device specified. as shown here http://www.steveo.us/tivoli/5.jpg I then tried in the driver properties, putting the device over to the left column Devices controlled by TSM Device Driver, rebooted , but it put the device back to the column Devices controlled by Native Device Drivers as shown here http://www.steveo.us/tivoli/6.jpg So how do I properly install this driver if there is no inf file for it. I also see in the docs that in windows 2000 that the tsm device drivers are not needed. Thanks for any help On 15 Oct 2003 at 12:00, alkina wrote: Dear Mr. steeve , This type of error i mean i/o error comes when u are using the wrong device name,or device is not properly configured.If these are ok please try: 1.Uninstall Previously installed TSM device driver. 2. Now install the seagate driver at o.s level and try local backup thru win2k.If so tape is communicatibg properly. 3. Now install TSM device driver . 4.Now go to o.s level ,go to manage and tape drives.Here u can see ur tapes drive.This is using windows driver.Now update the driver and u will be prompted two drivers(one from seagate and other from IBM TSM ).Choose IBM TSM DEVICE driver. 5.From the TSM managment console verify that TSM DEVICE DRIVER is RUNNING if not start it. 6.Now delete old devc,drive etc. and define allagain(libr,drive,path,devc,stg etc.) Thanks and Regards Alkina l India [EMAIL PROTECTED] wrote: Hello all, I have installed TSM server (and client) 5.1 on win2k pro, service pack 4 + all updates. This machine has a new Seagate tapestor travan 20 drive (which I've tested with the seagate software to do a backup and it works fine) After install of TSM server completes and I run the management console it's initial setup wizard runs and during the devices install part it detects my drive as mt1.0.0.0, I check the device in list to use it, click next and I get the error Failed to issue a command to the server, click OK to see why. I click ok and I get the following. erver Version 5, Release 1, Level 5.0 Server date/time: 10/13/2003 17:27:29 Last access: 10/13/2003 17:25:23 ANS8000I Server command: 'define library GENLIB1
Re: Help needed using seagate STT20000A
Steve, In the TSM MC, under device information, were you able to see tape0 in the Device Name colume? Just wanna make sure that the device is controlled by the native driver. Hunny Kershaw Steve Ochani [EMAIL PROTECTED]To: [EMAIL PROTECTED] Sent by: ADSM: cc: Dist StorSubject: Re: Help needed using seagate STT2A Manager [EMAIL PROTECTED] .EDU 10/16/2003 02:11 PM Please respond to ADSM: Dist Stor Manager Hello, On 16 Oct 2003 at 8:43, Hunny Kershaw wrote: Steve, The TSM device driver does not support drives with device ID STT2A. You will need the Windows native driver for this device. That's what I tried to use first. And I got the following error when trying to do the initial device config. Server Version 5, Release 1, Level 5.0 Server date/time: 10/13/2003 17:27:29 Last access: 10/13/2003 17:25:23 ANS8000I Server command: 'define library GENLIB1 libtype=manual' ANR8400I Library GENLIB1 defined. ANS8000I Server command: 'define drive GENLIB1 GENDRV_0.0.0' ANR8404I Drive GENDRV_0.0.0 defined in library GENLIB1. ANS8000I Server command: 'define path STEVEOIMAGE2_SERVER1 GENDRV_0.0.0 srctype=server desttype=drive device=mt1.0.0.0 library=GENLIB1' ANR8420E DEFINE PATH: An I/O error occurred while accessing drive GENDRV_0.0.0. ANS8001I Return code 15. ANS8000I Server command: 'define devc GENCLASS1 devtype=GENERICTAPE library=GENLIB1' ANR2203I Device class GENCLASS1 defined. ANS8000I Server command: 'define stgpool GENPOOL1 GENCLASS1 maxscratch=500 dataformat=NATIVE' ANR2200I Storage pool GENPOOL1 defined (device class GENCLASS1). ANS8002I Highest return code was 15. So how do I use the device? Regards, Hunny Kershaw Steve Ochani [EMAIL PROTECTED]To: [EMAIL PROTECTED] Sent by: ADSM: cc: Dist StorSubject: Re: Help needed using seagate STT2A Manager [EMAIL PROTECTED] .EDU 10/15/2003 04:33 PM Please respond to ADSM: Dist Stor Manager Thanks for the reply, I tried what you suggested, uninstalled the TSM device driver (via add/remove programs). Checked ms driver with backup utility from seagate, backup works fine. Installed TSM device driver from CD. Went to device manager, update drivers -- windows could not find the ibm device driver, even had it scan the CD (there is no INF file for the adsmscsi.sys). So I tried forcefully installing it by modifying the winnt/inf/tape.inf file and put in an entry for IBM and for the admscsi.sys file. It seemed to install fine, rebooted, check the driver property and it seems fine, lists ibm driver as shown here http://www.steveo.us/tivoli/4.jpg But now when I go into TSM console and try to start the driver I get the error Unable to start the TSM Device Driver. Reason: The system cannot find the device specified. as shown here http://www.steveo.us/tivoli/5.jpg I then tried in the driver properties, putting the device over to the left column Devices controlled by TSM Device Driver, rebooted , but it put the device back to the column Devices controlled by Native Device Drivers as shown here http://www.steveo.us/tivoli/6.jpg So how do I properly install this driver if there is no inf file for it. I also see in the docs that in windows 2000 that the tsm device drivers are not needed. Thanks for any help On 15 Oct 2003 at 12:00, alkina wrote: Dear Mr. steeve , This type of error i mean i/o error comes when u are using the wrong device name,or device is not properly configured.If these are ok please try: 1.Uninstall Previously installed TSM device driver. 2. Now install the seagate driver at o.s level and try local backup thru win2k.If so
Re: Help needed using seagate STT20000A
Thanks for the reply, I tried what you suggested, uninstalled the TSM device driver (via add/remove programs). Checked ms driver with backup utility from seagate, backup works fine. Installed TSM device driver from CD. Went to device manager, update drivers -- windows could not find the ibm device driver, even had it scan the CD (there is no INF file for the adsmscsi.sys). So I tried forcefully installing it by modifying the winnt/inf/tape.inf file and put in an entry for IBM and for the admscsi.sys file. It seemed to install fine, rebooted, check the driver property and it seems fine, lists ibm driver as shown here http://www.steveo.us/tivoli/4.jpg But now when I go into TSM console and try to start the driver I get the error Unable to start the TSM Device Driver. Reason: The system cannot find the device specified. as shown here http://www.steveo.us/tivoli/5.jpg I then tried in the driver properties, putting the device over to the left column Devices controlled by TSM Device Driver, rebooted , but it put the device back to the column Devices controlled by Native Device Drivers as shown here http://www.steveo.us/tivoli/6.jpg So how do I properly install this driver if there is no inf file for it. I also see in the docs that in windows 2000 that the tsm device drivers are not needed. Thanks for any help On 15 Oct 2003 at 12:00, alkina wrote: Dear Mr. steeve , This type of error i mean i/o error comes when u are using the wrong device name,or device is not properly configured.If these are ok please try: 1.Uninstall Previously installed TSM device driver. 2. Now install the seagate driver at o.s level and try local backup thru win2k.If so tape is communicatibg properly. 3. Now install TSM device driver . 4.Now go to o.s level ,go to manage and tape drives.Here u can see ur tapes drive.This is using windows driver.Now update the driver and u will be prompted two drivers(one from seagate and other from IBM TSM ).Choose IBM TSM DEVICE driver. 5.From the TSM managment console verify that TSM DEVICE DRIVER is RUNNING if not start it. 6.Now delete old devc,drive etc. and define allagain(libr,drive,path,devc,stg etc.) Thanks and Regards Alkina l India [EMAIL PROTECTED] wrote: Hello all, I have installed TSM server (and client) 5.1 on win2k pro, service pack 4 + all updates. This machine has a new Seagate tapestor travan 20 drive (which I've tested with the seagate software to do a backup and it works fine) After install of TSM server completes and I run the management console it's initial setup wizard runs and during the devices install part it detects my drive as mt1.0.0.0, I check the device in list to use it, click next and I get the error Failed to issue a command to the server, click OK to see why. I click ok and I get the following. erver Version 5, Release 1, Level 5.0 Server date/time: 10/13/2003 17:27:29 Last access: 10/13/2003 17:25:23 ANS8000I Server command: 'define library GENLIB1 libtype=manual' ANR8400I Library GENLIB1 defined. ANS8000I Server command: 'define dri! ve GENLIB1 GENDRV_0.0.0' ANR8404I Drive GENDRV_0.0.0 defined in library GENLIB1. ANS8000I Server command: 'define path STEVEOIMAGE2_SERVER1 GENDRV_0.0.0 srctype=server desttype=drive device=mt1.0.0.0 library=GENLIB1' ANR8420E DEFINE PATH: An I/O error occurred while accessing drive GENDRV_0.0.0. ANS8001I Return code 15. ANS8000I Server command: 'define devc GENCLASS1 devtype=GENERICTAPE library=GENLIB1' ANR2203I Device class GENCLASS1 defined. ANS8000I Server command: 'define stgpool GENPOOL1 GENCLASS1 maxscratch=500 dataformat=NATIVE' ANR2200I Storage pool GENPOOL1 defined (device class GENCLASS1). ANS8002I Highest return code was 15. I have tried canceling the initial setup and tried installing the device later but get the same resulting I/O error. I can make a new node and assign it the policy to use the pool but as soon as i try to backup I get an error such as Server media mount not possible. To see a couple of screenshots of the errors they are at http://www.steveo.us/tivoli/1.jpg http://www.steveo.us/tivoli/2.jpg Thanks for any help. «¤»¥«¤»§«¤»¥«¤»§«¤»¥«¤»§«¤»¥«¤»§«¤»¥«¤»§«¤»¥«¤»§«¤»¥«¤» Education is what remains after one has forgotten everything he learned in school. -Albert Einstein Steve O. http://www.steveo.us Get Your Private, Free E-mail from Indiatimes at http://email.indiatimes.com Buy The Best In BOOKS at http://www.bestsellers.indiatimes.com Bid for Air Tickets on Air Sahara Flights. For Best Deals, log on to http://airsahara.indiatimes.com and Bid Now !
Help needed using seagate STT20000A
Hello all, I have installed TSM server (and client) 5.1 on win2k pro, service pack 4 + all updates. This machine has a new Seagate tapestor travan 20 drive (which I've tested with the seagate software to do a backup and it works fine) After install of TSM server completes and I run the management console it's initial setup wizard runs and during the devices install part it detects my drive as mt1.0.0.0, I check the device in list to use it, click next and I get the error Failed to issue a command to the server, click OK to see why. I click ok and I get the following. erver Version 5, Release 1, Level 5.0 Server date/time: 10/13/2003 17:27:29 Last access: 10/13/2003 17:25:23 ANS8000I Server command: 'define library GENLIB1 libtype=manual' ANR8400I Library GENLIB1 defined. ANS8000I Server command: 'define drive GENLIB1 GENDRV_0.0.0' ANR8404I Drive GENDRV_0.0.0 defined in library GENLIB1. ANS8000I Server command: 'define path STEVEOIMAGE2_SERVER1 GENDRV_0.0.0 srctype=server desttype=drive device=mt1.0.0.0 library=GENLIB1' ANR8420E DEFINE PATH: An I/O error occurred while accessing drive GENDRV_0.0.0. ANS8001I Return code 15. ANS8000I Server command: 'define devc GENCLASS1 devtype=GENERICTAPE library=GENLIB1' ANR2203I Device class GENCLASS1 defined. ANS8000I Server command: 'define stgpool GENPOOL1 GENCLASS1 maxscratch=500 dataformat=NATIVE' ANR2200I Storage pool GENPOOL1 defined (device class GENCLASS1). ANS8002I Highest return code was 15. I have tried canceling the initial setup and tried installing the device later but get the same resulting I/O error. I can make a new node and assign it the policy to use the pool but as soon as i try to backup I get an error such as Server media mount not possible. To see a couple of screenshots of the errors they are at http://www.steveo.us/tivoli/1.jpg http://www.steveo.us/tivoli/2.jpg Thanks for any help. «¤»¥«¤»§«¤»¥«¤»§«¤»¥«¤»§«¤»¥«¤»§«¤»¥«¤»§«¤»¥«¤»§«¤»¥«¤» Education is what remains after one has forgotten everything he learned in school. -Albert Einstein Steve O. http://www.steveo.us
Re: help needed include/exclude/rebind
Posted this w/o a subject line... -tb Date: Fri, 29 Aug 2003 11:24:17 -0400 To: [EMAIL PROTECTED] From: Ted Byrne [EMAIL PROTECTED] From: Bill Fitzgerald [EMAIL PROTECTED] I have a client running Sun Solaris 5.8 with client version 5.1.5 TSM server is AIX 4.3.3 running TSM 5.1.6.5 Below is the include/exclude list from the dsm.sys include * shared_dynamic_60 include /adsmorc/.../* database_class include /dev/.../* database_class include /udb/.../* database_class include /MOUNT/.../* database_0 include /usr1/.../* database_0 exclude /tmp/.../* we recently add the last two includes, stopped and started the client, and the objects were rebound. Bill, You might want to investigate exactly _what_ was rebound after applying the changes to the include/exclude list. In my experience, the include/exclude syntax on the *nix platforms can be a bit misleading. For example, the statement exclude /.../* would appear to exclude all files on the client. What it actually does is exclude all files *only* in the / filesystem. The first part of an include or exclude statement refers to the filesystem, not a directory. In the Win32 world, this is explicit, since you have the colon separating the drive letter (or filesystem) from the path. On *nix systems, the distinction is not readily apparent. From the expiration messages that you posted, you appear to have other filesystems mounted below /usr1 and /MOUNT: /usr1/GATE, /usr1/EXPORT, /MOUNT/MISC, /usr1/ICACHE/1 If you issue a q ba /usr1/GATE/* fom the baclient command line, or browse there with the GUI, I'm betting that you will see the managementclass as SHARED_DYNAMIC_60 If you add these lines to your cinclude/exclude list, you should get the results that you are looking for. include /usr1/GATE/.../* database_0 include /usr1/EXPORT/.../* database_0 include /usr1/ICACHE/1/.../* database_0 include /MOUNT/MISC/.../* database_0 Hope this helps, Ted
help needed include/exclude/rebind
I have a client running Sun Solaris 5.8 with client version 5.1.5 TSM server is AIX 4.3.3 running TSM 5.1.6.5 Below is the include/exclude list from the dsm.sys include * shared_dynamic_60 include /adsmorc/.../* database_class include /dev/.../* database_class include /udb/.../* database_class include /MOUNT/.../* database_0 include /usr1/.../* database_0 exclude /tmp/.../* we recently add the last two includes, stopped and started the client, and the objects were rebound. my problem is that in the expire inventory process i get this 08/27/03 15:02:02 ANR4391I Expiration processing node PACSARCH_SOLARIS, filespace /usr1/GATE, fsId 7, domain STANDARD, and management class SHARED_DYNAMIC_60 - for BACKUP type files. 08/27/03 15:02:03 ANR4391I Expiration processing node PACSARCH_SOLARIS, filespace /usr1/EXPORT, fsId 8, domain STANDARD, and management class SHARED_DYNAMIC_60 - for BACKUP type files. 08/27/03 15:02:04 ANR4391I Expiration processing node PACSARCH_SOLARIS, filespace /MOUNT/MISC, fsId 9, domain STANDARD, and management class SHARED_DYNAMIC_60 - for BACKUP type files. 08/27/03 15:02:05 ANR4391I Expiration processing node PACSARCH_SOLARIS, filespace /usr1/ICACHE/1, fsId 10, domain STANDARD, and management class SHARED_DYNAMIC_60 - for BACKUP type notice that the management class is not what the include says it should be. Am i doing something wrong? HELP William Fitzgerald Software Programmer Munson Medical Center [EMAIL PROTECTED]
Re: help needed include/exclude/rebind
The behavior shown is expected if the TSM server's inventory includes any backups of files that have been deleted from the client file systems involved. The first incremental backups of each of the various /MOUNT/... and /usr1/... file systems after the include/exclude file would have caused rebinding of backups of files in those file systems to the new management class. The rebinding would have affected both the active backups (the ones that match the current file contents) and inactive backups (the ones that match older versions of the file contents). However, there is no mechanism for rebinding the inactive backups of files that no longer exist on client systems. I have a client running Sun Solaris 5.8 with client version 5.1.5 TSM server is AIX 4.3.3 running TSM 5.1.6.5 Below is the include/exclude list from the dsm.sys include * shared_dynamic_60 include /adsmorc/.../* database_class include /dev/.../* database_class include /udb/.../* database_class include /MOUNT/.../* database_0 include /usr1/.../* database_0 exclude /tmp/.../* we recently add the last two includes, stopped and started the client, and the o bjects were rebound. my problem is that in the expire inventory process i get this 08/27/03 15:02:02 ANR4391I Expiration processing node PACSARCH_SOLARIS, filespace /usr1/GATE, fsId 7, domain STANDARD, and management class SHARED_DYNAMIC_60 - for BACKUP type files. 08/27/03 15:02:03 ANR4391I Expiration processing node PACSARCH_SOLARIS, filespace /usr1/EXPORT, fsId 8, domain STANDARD, and management class SHARED_DYNAMIC_60 - for BACKUP type files. 08/27/03 15:02:04 ANR4391I Expiration processing node PACSARCH_SOLARIS, filespace /MOUNT/MISC, fsId 9, domain STANDARD, and management class SHARED_DYNAMIC_60 - for BACKUP type files. 08/27/03 15:02:05 ANR4391I Expiration processing node PACSARCH_SOLARIS, filespace /usr1/ICACHE/1, fsId 10, domain STANDARD, and management class SHARED_DYNAMIC_60 - for BACKUP type notice that the management class is not what the include says it should be.
Re: Urgent help needed with restore
Chris, Can you tell me the exact level of the TSM API that you are running? You can use this command: tdpexcc query tsm Thanks, Del Del Hoobler IBM Corporation [EMAIL PROTECTED] - Never cut what can be untied. - Commit yourself to constant improvement. = I am running TSM on Windows 2000 Server (TSM Version 4, Release 1, Level 0.0) and restoring to a TDP for Exchange V2.2 when the restore is about to end I receive the following entries on my error log. 01/07/2003 10:00:18 The 209463797th code was found to be out of sequence. The code (1761) was greater than (1461), the next available slot in the string table. Please help if you know a possible cause or resolution.
Re: Urgent help needed with restore
Chris, This one is *really* bad news. The error is coming from the file expansion section of the client. Mark the input tape as unavailable or destroyed to force the restore onto your offsite copy, then at a convenient point, issue a restore vol on the input tape. Regards, -=Dave=- +44 (0) 20 7608 7140 A Beer doesn't have in-laws. PINNI, BALANAND (SBCSI) To: [EMAIL PROTECTED] [EMAIL PROTECTED] cc: Sent by: ADSM: Subject: Re: Urgent help needed with restore Dist Stor Manager [EMAIL PROTECTED] .EDU 01/10/2003 11:29 PM Please respond to ADSM: Dist Stor Manager Run Audit on volume and db.Db will take long time if ur db is big. Balanand -Original Message- From: Chris Manko [mailto:[EMAIL PROTECTED]] Sent: Friday, January 10, 2003 4:12 PM To: [EMAIL PROTECTED] Subject: Urgent help needed with restore Importance: High I am running TSM on Windows 2000 Server (TSM Version 4, Release 1, Level 0.0) and restoring to a TDP for Exchange V2.2 when the restore is about to end I receive the following entries on my error log. 01/07/2003 10:00:18 The 209463797th code was found to be out of sequence. The code (1761) was greater than (1461), the next available slot in the string table. 01/07/2003 10:03:41 The 209463797th code was found to be out of sequence. The code (1761) was greater than (1461), the next available slot in the string table. 01/07/2003 10:45:22 The 209463797th code was found to be out of sequence. The code (1761) was greater than (1461), the next available slot in the string table. 01/07/2003 10:51:41 The 209463797th code was found to be out of sequence. The code (1761) was greater than (1461), the next available slot in the string table. 01/07/2003 12:33:29 The 209463797th code was found to be out of sequence. The code (1761) was greater than (1461), the next available slot in the string table. 01/07/2003 12:59:36 The 209463797th code was found to be out of sequence. The code (1761) was greater than (1461), the next available slot in the string table. 01/07/2003 13:18:39 The 209463797th code was found to be out of sequence. The code (1761) was greater than (1461), the next available slot in the string table. 01/07/2003 17:22:02 The 209463797th code was found to be out of sequence. The code (1761) was greater than (1461), the next available slot in the string table. 01/07/2003 17:51:15 The 209463797th code was found to be out of sequence. The code (1761) was greater than (1461), the next available slot in the string table. Please help if you know a possible cause or resolution. Thanks Chris
Re: Urgent help needed with restore
Run Audit on volume and db.Db will take long time if ur db is big. Balanand -Original Message- From: Chris Manko [mailto:[EMAIL PROTECTED]] Sent: Friday, January 10, 2003 4:12 PM To: [EMAIL PROTECTED] Subject: Urgent help needed with restore Importance: High I am running TSM on Windows 2000 Server (TSM Version 4, Release 1, Level 0.0) and restoring to a TDP for Exchange V2.2 when the restore is about to end I receive the following entries on my error log. 01/07/2003 10:00:18 The 209463797th code was found to be out of sequence. The code (1761) was greater than (1461), the next available slot in the string table. 01/07/2003 10:03:41 The 209463797th code was found to be out of sequence. The code (1761) was greater than (1461), the next available slot in the string table. 01/07/2003 10:45:22 The 209463797th code was found to be out of sequence. The code (1761) was greater than (1461), the next available slot in the string table. 01/07/2003 10:51:41 The 209463797th code was found to be out of sequence. The code (1761) was greater than (1461), the next available slot in the string table. 01/07/2003 12:33:29 The 209463797th code was found to be out of sequence. The code (1761) was greater than (1461), the next available slot in the string table. 01/07/2003 12:59:36 The 209463797th code was found to be out of sequence. The code (1761) was greater than (1461), the next available slot in the string table. 01/07/2003 13:18:39 The 209463797th code was found to be out of sequence. The code (1761) was greater than (1461), the next available slot in the string table. 01/07/2003 17:22:02 The 209463797th code was found to be out of sequence. The code (1761) was greater than (1461), the next available slot in the string table. 01/07/2003 17:51:15 The 209463797th code was found to be out of sequence. The code (1761) was greater than (1461), the next available slot in the string table. Please help if you know a possible cause or resolution. Thanks Chris
HELP NEEDED : can not recall data from 3684 library
Hi all, I have spent a lot of time in resolving the following problem but in vain, I need your help. My problem began when I tried to do dsmrecall to one of my migrated files stored in 3584-LIB (dsmrecall file). The output of the command is : ANS4007E Error processing '/oper/ICMSHALAD+0039': access to the object is denied My migrated file is not recalÚled to my workstation, when I saw in the dsmerror.log file, I found these messages: ÚANS9028E dsmrecalld: cannot determine the file system name for fsid (2 0066, 8). ÚANS9548W Cannot complete remote file access. ÚANS4007E Error processing '/oper/ICMSHALAD+0039': access to the object is denied The problem is that I can recall some files migrated and can not for others. I thought to do an audit library, no result. After I did audit volume for 5 tapes (Storage Pool Name: SPACEMGTAPE). I found One tape with damaged files : audit volume 772AAO fix=no I found 18 damaged files. I repeat this operation another time (audit volume 772AAO fix=no ), but I found only 3 damaged files. I recall my file, no result. After the audit command I found the following messages in the activity log : ANR8311E An I/O error ocured while accessing drive rmt1 for read operation ANR1417W access mode for volume 772AAO now set to read only due to exessive errors ANR2335W audit volume has encountered an I/O error for volume 772AAO while attempting to read /oper/ICMSH.. ANR8376E I/O error on drive RMT1... Refer to Appendix D in the Messages manual for recommended action ANR8359E Media fault detected on LTO volume 772AAO in drive RMT1 ANR2317W Audit volume found damaged file on volume 772AAO node. Today, I have done for the third time audit volume 772AAO fix=no, but I don't find damaged files, I don't know why. Some of my files are always not recalled . In the dsmerror.log file I find a lot of others messages: ANS9507E dsmrecalld: cannot request the right on session 7234028338404 931412 for file handle c1c205713b530895 4ba40001000c token = 1684303472-4459551533704413222. Reason : A file descriptor does not refer to an open file. ÚANS9515E unkown: cannot set the migration information. Reason: A file descriptor does not refer to an open file. The output of the command : q volume 772AAO f=d is : Volume Name: 772AAO Storage Pool Name: SPACEMGTAPE Device Class Name: LTO-TAPE Estimated Capacity (MB): 143,559.3 Pct Util: 82.2 Volume Status: Full Access: ReadOnly Pct. Reclaimable Space: 17.8 Scratch Volume?: Yes In Error State?: No Number of Writable Sides: 1 Number of Times Mounted: 915 Write Pass Number: 1 Approx. Date Last Written: 06/19/02 02:03:23 Approx. Date Last Read: 11/26/02 14:21:12 Date Became Pending: Number of Write Errors: 0 Number of Read Errors: 64 Volume Location: Last Update by (administrator): ADMIN Last Update Date/Time: 11/25/02 12:19:00 PS : When I can not recall some of my migrated files to my local workstation, I thought that these files are written in the tape 772AAO that contains damaged files, but I found others files that I can not recall (by dsmrecall) and that are written in others volumes not containing damaged files. For information we have 3 clients TSM (OS=AIX433), and one TSM server with OS = AIX 433 library : 3584 -LIB Thank you very much _ Gagne une PS2 ! Envoie un SMS avec le code PS au 61166 (0,35 Hors coût du SMS)
HELP NEEDED : can not recall data from 3584 library
Hi all, I have spent a lot of time in resolving the following problem but in vain, I need your help. My problem began when I tried to do dsmrecall to one of my migrated files stored in 3584-LIB (dsmrecall file). The output of the command is : ANS4007E Error processing '/oper/ICMSHALAD+0039': access to the object is denied My migrated file is not recalÚled to my workstation, when I saw in the dsmerror.log file, I found these messages: ÚANS9028E dsmrecalld: cannot determine the file system name for fsid (2 0066, 8). ÚANS9548W Cannot complete remote file access. ÚANS4007E Error processing '/oper/ICMSHALAD+0039': access to the object is denied The problem is that I can recall some files migrated and can not for others. I thought to do an audit library, no result. After I did audit volume for 5 tapes (Storage Pool Name: SPACEMGTAPE). I found One tape with damaged files : audit volume 772AAO fix=no I found 18 damaged files. I repeat this operation another time (audit volume 772AAO fix=no ), but I found only 3 damaged files. I recall my file, no result. After the audit command I found the following messages in the activity log : ANR8311E An I/O error ocured while accessing drive rmt1 for read operation ANR1417W access mode for volume 772AAO now set to read only due to exessive errors ANR2335W audit volume has encountered an I/O error for volume 772AAO while attempting to read /oper/ICMSH.. ANR8376E I/O error on drive RMT1... Refer to Appendix D in the Messages manual for recommended action ANR8359E Media fault detected on LTO volume 772AAO in drive RMT1 ANR2317W Audit volume found damaged file on volume 772AAO node. Today, I have done for the third time audit volume 772AAO fix=no, but I don't find damaged files, I don't know why. Some of my files are always not recalled . In the dsmerror.log file I find a lot of others messages: ANS9507E dsmrecalld: cannot request the right on session 7234028338404 931412 for file handle c1c205713b530895 4ba40001000c token = 1684303472-4459551533704413222. Reason : A file descriptor does not refer to an open file. ÚANS9515E unkown: cannot set the migration information. Reason: A file descriptor does not refer to an open file. The output of the command : q volume 772AAO f=d is : Volume Name: 772AAO Storage Pool Name: SPACEMGTAPE Device Class Name: LTO-TAPE Estimated Capacity (MB): 143,559.3 Pct Util: 82.2 Volume Status: Full Access: ReadOnly Pct. Reclaimable Space: 17.8 Scratch Volume?: Yes In Error State?: No Number of Writable Sides: 1 Number of Times Mounted: 915 Write Pass Number: 1 Approx. Date Last Written: 06/19/02 02:03:23 Approx. Date Last Read: 11/26/02 14:21:12 Date Became Pending: Number of Write Errors: 0 Number of Read Errors: 64 Volume Location: Last Update by (administrator): ADMIN Last Update Date/Time: 11/25/02 12:19:00 PS : When I can not recall some of my migrated files to my local workstation, I thought that these files are written in the tape 772AAO that contains damaged files, but I found others files that I can not recall (by dsmrecall) and that are written in others volumes not containing damaged files. For information we have 3 clients TSM (OS=AIX433), and one TSM server with OS = AIX 433 library : 3584 -LIB Thank you very much _ Gagne une PS2 ! Envoie un SMS avec le code PS au 61166 (0,35 Hors coût du SMS)
Re: HELP NEEDED : can not recall data from 3584 library
I think the first thing I would do is move the data off the tapes to another tape. Then I would try the recall again. It appears the tape is going bad. -Original Message- From: rachida elouaraini [mailto:[EMAIL PROTECTED]] Sent: Wednesday, November 27, 2002 9:43 AM To: [EMAIL PROTECTED] Subject: HELP NEEDED : can not recall data from 3584 library Hi all, I have spent a lot of time in resolving the following problem but in vain, I need your help. My problem began when I tried to do dsmrecall to one of my migrated files stored in 3584-LIB (dsmrecall file). The output of the command is : ANS4007E Error processing '/oper/ICMSHALAD+0039': access to the object is denied My migrated file is not recalÚled to my workstation, when I saw in the dsmerror.log file, I found these messages: ÚANS9028E dsmrecalld: cannot determine the file system name for fsid (2 0066, 8). ÚANS9548W Cannot complete remote file access. ÚANS4007E Error processing '/oper/ICMSHALAD+0039': access to the object is denied The problem is that I can recall some files migrated and can not for others. I thought to do an audit library, no result. After I did audit volume for 5 tapes (Storage Pool Name: SPACEMGTAPE). I found One tape with damaged files : audit volume 772AAO fix=no I found 18 damaged files. I repeat this operation another time (audit volume 772AAO fix=no ), but I found only 3 damaged files. I recall my file, no result. After the audit command I found the following messages in the activity log : ANR8311E An I/O error ocured while accessing drive rmt1 for read operation ANR1417W access mode for volume 772AAO now set to read only due to exessive errors ANR2335W audit volume has encountered an I/O error for volume 772AAO while attempting to read /oper/ICMSH.. ANR8376E I/O error on drive RMT1... Refer to Appendix D in the Messages manual for recommended action ANR8359E Media fault detected on LTO volume 772AAO in drive RMT1 ANR2317W Audit volume found damaged file on volume 772AAO node. Today, I have done for the third time audit volume 772AAO fix=no, but I don't find damaged files, I don't know why. Some of my files are always not recalled . In the dsmerror.log file I find a lot of others messages: ANS9507E dsmrecalld: cannot request the right on session 7234028338404 931412 for file handle c1c205713b530895 4ba40001000c token = 1684303472-4459551533704413222. Reason : A file descriptor does not refer to an open file. ÚANS9515E unkown: cannot set the migration information. Reason: A file descriptor does not refer to an open file. The output of the command : q volume 772AAO f=d is : Volume Name: 772AAO Storage Pool Name: SPACEMGTAPE Device Class Name: LTO-TAPE Estimated Capacity (MB): 143,559.3 Pct Util: 82.2 Volume Status: Full Access: ReadOnly Pct. Reclaimable Space: 17.8 Scratch Volume?: Yes In Error State?: No Number of Writable Sides: 1 Number of Times Mounted: 915 Write Pass Number: 1 Approx. Date Last Written: 06/19/02 02:03:23 Approx. Date Last Read: 11/26/02 14:21:12 Date Became Pending: Number of Write Errors: 0 Number of Read Errors: 64 Volume Location: Last Update by (administrator): ADMIN Last Update Date/Time: 11/25/02 12:19:00 PS : When I can not recall some of my migrated files to my local workstation, I thought that these files are written in the tape 772AAO that contains damaged files, but I found others files that I can not recall (by dsmrecall) and that are written in others volumes not containing damaged files. For information we have 3 clients TSM (OS=AIX433), and one TSM server with OS = AIX 433 library : 3584 -LIB Thank you very much _ Gagne une PS2 ! Envoie un SMS avec le code PS au 61166 (0,35 Hors coût du SMS)
Re: HELP NEEDED : can not recall data from 3584 library
Do other volumes work in that drive? Does that volume work in other drives? That can give you a clue as to where the problem lies. If the volume appears to be bad, I'd suggest restoring that volume from your copypool. You can do that with a restore volume xx preview=yes to find out what volumes you might need to request back from offsite. Alex Paschal Storage Administrator Freightliner, LLC (503) 745-6850 phone/vmail -Original Message- From: rachida elouaraini [mailto:[EMAIL PROTECTED]] Sent: Wednesday, November 27, 2002 7:43 AM To: [EMAIL PROTECTED] Subject: HELP NEEDED : can not recall data from 3584 library Hi all, I have spent a lot of time in resolving the following problem but in vain, I need your help. My problem began when I tried to do dsmrecall to one of my migrated files stored in 3584-LIB (dsmrecall file). The output of the command is : ANS4007E Error processing '/oper/ICMSHALAD+0039': access to the object is denied My migrated file is not recalÚled to my workstation, when I saw in the dsmerror.log file, I found these messages: ÚANS9028E dsmrecalld: cannot determine the file system name for fsid (2 0066, 8). ÚANS9548W Cannot complete remote file access. ÚANS4007E Error processing '/oper/ICMSHALAD+0039': access to the object is denied The problem is that I can recall some files migrated and can not for others. I thought to do an audit library, no result. After I did audit volume for 5 tapes (Storage Pool Name: SPACEMGTAPE). I found One tape with damaged files : audit volume 772AAO fix=no I found 18 damaged files. I repeat this operation another time (audit volume 772AAO fix=no ), but I found only 3 damaged files. I recall my file, no result. After the audit command I found the following messages in the activity log : ANR8311E An I/O error ocured while accessing drive rmt1 for read operation ANR1417W access mode for volume 772AAO now set to read only due to exessive errors ANR2335W audit volume has encountered an I/O error for volume 772AAO while attempting to read /oper/ICMSH.. ANR8376E I/O error on drive RMT1... Refer to Appendix D in the Messages manual for recommended action ANR8359E Media fault detected on LTO volume 772AAO in drive RMT1 ANR2317W Audit volume found damaged file on volume 772AAO node. Today, I have done for the third time audit volume 772AAO fix=no, but I don't find damaged files, I don't know why. Some of my files are always not recalled . In the dsmerror.log file I find a lot of others messages: ANS9507E dsmrecalld: cannot request the right on session 7234028338404 931412 for file handle c1c205713b530895 4ba40001000c token = 1684303472-4459551533704413222. Reason : A file descriptor does not refer to an open file. ÚANS9515E unkown: cannot set the migration information. Reason: A file descriptor does not refer to an open file. The output of the command : q volume 772AAO f=d is : Volume Name: 772AAO Storage Pool Name: SPACEMGTAPE Device Class Name: LTO-TAPE Estimated Capacity (MB): 143,559.3 Pct Util: 82.2 Volume Status: Full Access: ReadOnly Pct. Reclaimable Space: 17.8 Scratch Volume?: Yes In Error State?: No Number of Writable Sides: 1 Number of Times Mounted: 915 Write Pass Number: 1 Approx. Date Last Written: 06/19/02 02:03:23 Approx. Date Last Read: 11/26/02 14:21:12 Date Became Pending: Number of Write Errors: 0 Number of Read Errors: 64 Volume Location: Last Update by (administrator): ADMIN Last Update Date/Time: 11/25/02 12:19:00 PS : When I can not recall some of my migrated files to my local workstation, I thought that these files are written in the tape 772AAO that contains damaged files, but I found others files that I can not recall (by dsmrecall) and that are written in others volumes not containing damaged files. For information we have 3 clients TSM (OS=AIX433), and one TSM server with OS = AIX 433 library : 3584 -LIB Thank you very much _ Gagne une PS2 ! Envoie un SMS avec le code PS au 61166 (0,35 Hors coût du SMS)
Re: HELP NEEDED : can not recall data from 3584 library
It would be even better to mark the tape as destroyed and perform restore from copypool. But problems with other volumes are more alarming. There might be a drive problem. Zlatko Krastev IT Consultant Davidson, Becky [EMAIL PROTECTED] Sent by: ADSM: Dist Stor Manager [EMAIL PROTECTED] 27.11.2002 16:50 Please respond to ADSM: Dist Stor Manager To: [EMAIL PROTECTED] cc: Subject:Re: HELP NEEDED : can not recall data from 3584 library I think the first thing I would do is move the data off the tapes to another tape. Then I would try the recall again. It appears the tape is going bad. -Original Message- From: rachida elouaraini [mailto:[EMAIL PROTECTED]] Sent: Wednesday, November 27, 2002 9:43 AM To: [EMAIL PROTECTED] Subject: HELP NEEDED : can not recall data from 3584 library Hi all, I have spent a lot of time in resolving the following problem but in vain, I need your help. My problem began when I tried to do dsmrecall to one of my migrated files stored in 3584-LIB (dsmrecall file). The output of the command is : ANS4007E Error processing '/oper/ICMSHALAD+0039': access to the object is denied My migrated file is not recalÚled to my workstation, when I saw in the dsmerror.log file, I found these messages: ÚANS9028E dsmrecalld: cannot determine the file system name for fsid (2 0066, 8). ÚANS9548W Cannot complete remote file access. ÚANS4007E Error processing '/oper/ICMSHALAD+0039': access to the object is denied The problem is that I can recall some files migrated and can not for others. I thought to do an audit library, no result. After I did audit volume for 5 tapes (Storage Pool Name: SPACEMGTAPE). I found One tape with damaged files : audit volume 772AAO fix=no I found 18 damaged files. I repeat this operation another time (audit volume 772AAO fix=no ), but I found only 3 damaged files. I recall my file, no result. After the audit command I found the following messages in the activity log : ANR8311E An I/O error ocured while accessing drive rmt1 for read operation ANR1417W access mode for volume 772AAO now set to read only due to exessive errors ANR2335W audit volume has encountered an I/O error for volume 772AAO while attempting to read /oper/ICMSH.. ANR8376E I/O error on drive RMT1... Refer to Appendix D in the Messages manual for recommended action ANR8359E Media fault detected on LTO volume 772AAO in drive RMT1 ANR2317W Audit volume found damaged file on volume 772AAO node. Today, I have done for the third time audit volume 772AAO fix=no, but I don't find damaged files, I don't know why. Some of my files are always not recalled . In the dsmerror.log file I find a lot of others messages: ANS9507E dsmrecalld: cannot request the right on session 7234028338404 931412 for file handle c1c205713b530895 4ba40001000c token = 1684303472-4459551533704413222. Reason : A file descriptor does not refer to an open file. ÚANS9515E unkown: cannot set the migration information. Reason: A file descriptor does not refer to an open file. The output of the command : q volume 772AAO f=d is : Volume Name: 772AAO Storage Pool Name: SPACEMGTAPE Device Class Name: LTO-TAPE Estimated Capacity (MB): 143,559.3 Pct Util: 82.2 Volume Status: Full Access: ReadOnly Pct. Reclaimable Space: 17.8 Scratch Volume?: Yes In Error State?: No Number of Writable Sides: 1 Number of Times Mounted: 915 Write Pass Number: 1 Approx. Date Last Written: 06/19/02 02:03:23 Approx. Date Last Read: 11/26/02 14:21:12 Date Became Pending: Number of Write Errors: 0 Number of Read Errors: 64 Volume Location: Last Update by (administrator): ADMIN Last Update Date/Time: 11/25/02 12:19:00 PS : When I can not recall some of my migrated files to my local workstation, I thought that these files are written in the tape 772AAO that contains damaged files, but I found others files that I can not recall (by dsmrecall) and that are written in others volumes not containing damaged files. For information we have 3 clients TSM (OS=AIX433), and one TSM server with OS = AIX 433 library : 3584 -LIB Thank you very much _ Gagne une PS2 ! Envoie un SMS avec le code PS au 61166 (0,35 Hors coût du SMS)
Help needed on restore db
TSM people, I am trying to perform a dsmserv restore db on a brand new TSM Server 4.2.1 running on a Windows 2000 Server machine. This db is stored on a tape automated library (IBM 3590) and was backed up from a TSM 4.1.0 Server on another machine, also W2000. Below is what appears at the DOS dialog where I issued the restore db command: = D:\TSM421\serverdsmserv restore db volume=T00039 devclass=359CLASS8 commit=YES ANR0900I Processing options file d:\tsm421\server1\dsmserv.opt. ANR7800I DSMSERV generated at 12:09:11 on Aug 29 2001. Tivoli Storage Manager for Windows NT Version 4, Release 2, Level 1.0 Licensed Materials - Property of IBM 5698-TSM (C) Copyright IBM Corporation 1999,2001. All rights reserved. U.S. Government Users Restricted Rights - Use, duplication or disclosure restricted by GSA ADP Schedule Contract with IBM Corporation. ANR8200I TCP/IP driver ready for connection with clients on port 1500. ANR0200I Recovery log assigned capacity is 500 megabytes. ANR0201I Database assigned capacity is 2048 megabytes. ANR8300E I/O error on library LB1.1.0.2 (OP=8401C050, CC=203, KEY=02, ASC=04,ASCQ=03, SENSE=70.00.02.00.00.00.00.58.00.00.00.00.04.03.FF.03.C4.77.01.01.0A.- 06.01.00.00.00.00.00.00.00.B8.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.- 00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.32.- 32.45.20.20.20.20.00., Description=Manual intervention required). Refer to Appendix D in the 'Messages' manual for recommended action. ANRD admdbbk.c(4294): ThreadId0 Error 272 creating device class 359CLASS8. = For this particu;ar error message (ANR8300E) the Ask Tivoli website tells me to execute an AUDIT LIBRARY command from the command line By the way, the command line option at the Windows Start menu does not stays oppened (!!??). It just blinks and then disappear. I have to use the DOS window and work from there. Any help is highly apreciated. Thank you. Mario Behring Tivoli Consultant __ Do you Yahoo!? New DSL Internet Access from SBC Yahoo! http://sbc.yahoo.com
Re: Help needed on restore db
If you can, I would uninstall 4.2.1, then reinstall 4.1.0. Then try the database restore. Then upgrade to 4.2.1. I don't know if that would help, but it would eliminate the version difference as a cause of the problem. adam Adam Boyer Communications Analyst Board of Governors of the Federal Reserve System Mario Behring mariobehring@To: [EMAIL PROTECTED] YAHOO.COMcc: Sent by: Subject: Help needed on restore db ADSM: Dist Stor Manager [EMAIL PROTECTED] IST.EDU 10/04/2002 04:13 PM Please respond to ADSM: Dist Stor Manager TSM people, I am trying to perform a dsmserv restore db on a brand new TSM Server 4.2.1 running on a Windows 2000 Server machine. This db is stored on a tape automated library (IBM 3590) and was backed up from a TSM 4.1.0 Server on another machine, also W2000. Below is what appears at the DOS dialog where I issued the restore db command: = D:\TSM421\serverdsmserv restore db volume=T00039 devclass=359CLASS8 commit=YES ANR0900I Processing options file d:\tsm421\server1\dsmserv.opt. ANR7800I DSMSERV generated at 12:09:11 on Aug 29 2001. Tivoli Storage Manager for Windows NT Version 4, Release 2, Level 1.0 Licensed Materials - Property of IBM 5698-TSM (C) Copyright IBM Corporation 1999,2001. All rights reserved. U.S. Government Users Restricted Rights - Use, duplication or disclosure restricted by GSA ADP Schedule Contract with IBM Corporation. ANR8200I TCP/IP driver ready for connection with clients on port 1500. ANR0200I Recovery log assigned capacity is 500 megabytes. ANR0201I Database assigned capacity is 2048 megabytes. ANR8300E I/O error on library LB1.1.0.2 (OP=8401C050, CC=203, KEY=02, ASC=04,ASCQ=03, SENSE=70.00.02.00.00.00.00.58.00.00.00.00.04.03.FF.03.C4.77.01.01.0A.- 06.01.00.00.00.00.00.00.00.B8.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00. 00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.32. 32.45.20.20.20.20.00., Description=Manual intervention required). Refer to Appendix D in the 'Messages' manual for recommended action. ANRD admdbbk.c(4294): ThreadId0 Error 272 creating device class 359CLASS8. = For this particu;ar error message (ANR8300E) the Ask Tivoli website tells me to execute an AUDIT LIBRARY command from the command line By the way, the command line option at the Windows Start menu does not stays oppened (!!??). It just blinks and then disappear. I have to use the DOS window and work from there. Any help is highly apreciated. Thank you. Mario Behring Tivoli Consultant __ Do you Yahoo!? New DSL Internet Access from SBC Yahoo! http://sbc.yahoo.com
Help needed
hi, I'm looking for a manual on TSM scripting - can you help me?
Re: Help needed
Try this link... http://216.185.145.68/discus/messages/1/adsm_sql.pdf -Original Message- From: Wieslaw Markowiak/Kra/ComputerLand/PL [mailto:[EMAIL PROTECTED]] Sent: Monday, April 29, 2002 6:35 AM To: [EMAIL PROTECTED] Subject: Help needed hi, I'm looking for a manual on TSM scripting - can you help me? Blue Cross Blue Shield of Florida, Inc., and its subsidiary and affiliate companies are not responsible for errors or omissions in this e-mail message. Any personal comments made in this e-mail do not reflect the views of Blue Cross Blue Shield of Florida, Inc.
configuring TSM with HACMP and informix : help needed
Hi *'SM Gurus ! A probably easy question for anybody involved in this kind of installation : we are planing to install HACMP between two AIX boxes, let's call them A and B. The A box is hosting an informix db, wich is doing it's online backups thru onbar, using it's own dsm.sys with hostname A. The B box is also hosting an informix db, wich also has it's own online backup, using it's own dsm.sys, hostname B. Imagine the A box fails : machine B will automatically relay it, and temporarily host the A informix db. Problem is as follows : what about a restoration of my informix db back to sytem A ? Probably a full level 0 backup was made at the time the db was on server A, but all intermediary logs (logical logs) have been made as my informix db was hosted on system B : how do I do a restore of my db if part of the files belong hostname A and other part hostname B ? Do I need to install two different instances of tsm on each node, to be able to do my restore ? Lots of questions in fact, and absolutely no idea how to do it ! :-(( I'm not an informix specialist nor HACMP, so please, if you give me some infos, try to be as basical as possible ;-) Many many thanks in advance to any informix-hacmp god(esss) willing to help me ! Arnaud =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-= | Arnaud Brion, Panalpina Management Ltd., IT Group | | Viaduktstrasse 42, P.O. Box, 4002 Basel - Switzerland | | Phone: +41 61 226 19 78/Fax: +41 61 226 17 01 | =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
Re: configuring TSM with HACMP and Informix : help needed
Arnaud, This is how you could set it up in HACMP cluster: -Node A and node B. SAP SID1 and SID2 (or for you Informix DB) that are moving resources. 4 nodes defined in TSM: Node_A, Node_B, Node_SID1, Node_SID2. 4 schedulers running in the cluster, one for each physically system (Node_A and Node_B), one for each of the SIDs. Each schedule is backing up the disks that belongs to it using include/exclude lists. I don't know about onbar bat for SAP it is easy to select what nodename to use for the backup/restore. None-local schedule start: /usr/bin/nohup /usr/bin/dsmc sched -virtualnodename=$VIRTUALNODE -quiet -password=X /dev/null 21 /dev/null Filelevel restores with dsmc -virtualnodename=$VIRTUALNODE Regards, Jan Norback Atos Origin-IT (MS/DS/OSS Unix) VA-173, PO-box 218, 5600 MD Eindhoven, The Netherlands Groenewoudseweg 1 5621 BA Eindhoven, The Netherlands Email: [EMAIL PROTECTED] Tel: +31 (0)40-2780289 Mobile: +31 (0)6-12994492 Fax : +31 40 2783962 -Original Message- From: PAC Brion Arnaud [mailto:[EMAIL PROTECTED]] Sent: Wednesday, October 31, 2001 11:54 AM To: [EMAIL PROTECTED] Subject: configuring TSM with HACMP and informix : help needed Hi *'SM Gurus ! A probably easy question for anybody involved in this kind of installation : we are planing to install HACMP between two AIX boxes, let's call them A and B. The A box is hosting an informix db, wich is doing it's online backups thru onbar, using it's own dsm.sys with hostname A. The B box is also hosting an informix db, wich also has it's own online backup, using it's own dsm.sys, hostname B. Imagine the A box fails : machine B will automatically relay it, and temporarily host the A informix db. Problem is as follows : what about a restoration of my informix db back to sytem A ? Probably a full level 0 backup was made at the time the db was on server A, but all intermediary logs (logical logs) have been made as my informix db was hosted on system B : how do I do a restore of my db if part of the files belong hostname A and other part hostname B ? Do I need to install two different instances of tsm on each node, to be able to do my restore ? Lots of questions in fact, and absolutely no idea how to do it ! :-(( I'm not an informix specialist nor HACMP, so please, if you give me some infos, try to be as basical as possible ;-) Many many thanks in advance to any informix-hacmp god(esss) willing to help me ! Arnaud =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-= | Arnaud Brion, Panalpina Management Ltd., IT Group | | Viaduktstrasse 42, P.O. Box, 4002 Basel - Switzerland | | Phone: +41 61 226 19 78/Fax: +41 61 226 17 01 | =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
Re: configuring TSM with HACMP and informix : help needed
You don't. Run a level 0 backup after the fail over. Restore this to the secondary system. (You WILL in most every instance need to restore the Informix database on the secondary system. And this must be completed prior to the roll-over of the Informix logs to allow easy synchronization of the databases between primary and secondary. ADSM will give onbar back any object it asks for accociated with the nodename, filespace, and ADSM server requested. Onbar on the other hand will have difficulties pausing after half of the logical logs are restore, switching any one of these parameters and restarting the restore. You would need to be able to run an Informix restore to a certain log number, stop the restore(bring down onbar to re-read the dsm.sys file again), change the dsm.sys file and onconfig(engine bounce) then continue to roll forward of logs. I have not found that Informix can accomplish this. If you would like to pursue further, I would suggest verifying that Informix cannot continue a restore under the conditions above. Jeff Bach -Original Message- From: PAC Brion Arnaud [SMTP:[EMAIL PROTECTED]] Sent: Wednesday, October 31, 2001 4:54 AM To: [EMAIL PROTECTED] Subject: configuring TSM with HACMP and informix : help needed Hi *'SM Gurus ! A probably easy question for anybody involved in this kind of installation : we are planing to install HACMP between two AIX boxes, let's call them A and B. The A box is hosting an informix db, wich is doing it's online backups thru onbar, using it's own dsm.sys with hostname A. The B box is also hosting an informix db, wich also has it's own online backup, using it's own dsm.sys, hostname B. Imagine the A box fails : machine B will automatically relay it, and temporarily host the A informix db. Problem is as follows : what about a restoration of my informix db back to sytem A ? Probably a full level 0 backup was made at the time the db was on server A, but all intermediary logs (logical logs) have been made as my informix db was hosted on system B : how do I do a restore of my db if part of the files belong hostname A and other part hostname B ? Do I need to install two different instances of tsm on each node, to be able to do my restore ? Lots of questions in fact, and absolutely no idea how to do it ! :-(( I'm not an informix specialist nor HACMP, so please, if you give me some infos, try to be as basical as possible ;-) Many many thanks in advance to any informix-hacmp god(esss) willing to help me ! Arnaud =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-= | Arnaud Brion, Panalpina Management Ltd., IT Group | | Viaduktstrasse 42, P.O. Box, 4002 Basel - Switzerland | | Phone: +41 61 226 19 78/Fax: +41 61 226 17 01 | =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-= ** This email and any files transmitted with it are confidential and intended solely for the individual or entity to whom they are addressed. If you have received this email in error destroy it immediately. **
Re: configuring TSM with HACMP and informix : help needed
good question that is good planning job :-) It is not possible to answer just in few words, so I'd rather refer to docs. You can find some good information on http://www.redbooks.ibm.com/ , for example, look through: - Informix Cluster POWERsolution Guide, SG24-2020-00 Redbook, published December-31-1997 - SG244498 HACMP/ES Customization Examples. There are some other good books. That give you an idea. I didn't understand your question: Problem is as follows : what about a restoration of my informix db back to system A ? I guess you mix something if not sorry...HACMP assumes that shared disks should be used so all shared filesystem can be accessed from both nodes. In addition you can use cross-mounted NFS if you want to access it at the same time. That means you do not need that restoration at all. However you can restore files from A node backup to node B. To do that just use dsmB.opt instead of dsmA.opt on node B or change client nodename (virtialnode) option in corresponding dsm.opt / dsm.sys. Just briefly about HACMP configuration in general: (IBM calls that as mutual takeover configuration) (there are many options). It's better to draw some picture but ... I'd install the following on shared disks: (1) - tsm server soft/config files, tsm stgpools, tsm db/log, (you have two options: it can be installed on shared or local disks (rootvg) as well ) (2) informix db A (belongs to A node - service addr A, standby -B) (3) informix db B (belongs to B node - service addr B, standby - A) (4) informix soft ( ? the same as for tsm server soft) By default tsm dirs and files are installed in /usr filesystem (local disk, rootvg) but you can change it later to shared disks using mount facility. I believe it works for informix as well. and HACMP as an example: Node A service IP - A, standby IP - B resource group: filesystem: informix db A (informix soft/config files A ) tsm stgpool (? tsm server soft/config files) application servers: informix A tsm server tsm client A (can be configured using dsmA.opt ) Node B service IP - B, standby IP - A resource group: filesystems: informix db B (informix soft/config files B ) appl servers: informix B tsm client B (can be configured using dsmB.opt ) Configuration assumes that you have tsm backup library as shared (Highly available) resource (using SCSI differential interface connected to both nodes). If not you can use two tsm servers but they should be out of HACMP. sorry for my spelling good luck - Original Message - From: PAC Brion Arnaud [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Wednesday, October 31, 2001 5:54 AM Subject: configuring TSM with HACMP and informix : help needed Hi *'SM Gurus ! A probably easy question for anybody involved in this kind of installation : we are planing to install HACMP between two AIX boxes, let's call them A and B. The A box is hosting an informix db, wich is doing it's online backups thru onbar, using it's own dsm.sys with hostname A. The B box is also hosting an informix db, wich also has it's own online backup, using it's own dsm.sys, hostname B. Imagine the A box fails : machine B will automatically relay it, and temporarily host the A informix db. Problem is as follows : what about a restoration of my informix db back to sytem A ? Probably a full level 0 backup was made at the time the db was on server A, but all intermediary logs (logical logs) have been made as my informix db was hosted on system B : how do I do a restore of my db if part of the files belong hostname A and other part hostname B ? Do I need to install two different instances of tsm on each node, to be able to do my restore ? Lots of questions in fact, and absolutely no idea how to do it ! :-(( I'm not an informix specialist nor HACMP, so please, if you give me some infos, try to be as basical as possible ;-) Many many thanks in advance to any informix-hacmp god(esss) willing to help me ! Arnaud =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-= | Arnaud Brion, Panalpina Management Ltd., IT Group | | Viaduktstrasse 42, P.O. Box, 4002 Basel - Switzerland | | Phone: +41 61 226 19 78/Fax: +41 61 226 17 01 | =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
Help Needed/Point in Right Direction: Getting Tapes Off-Site
TSM'ers: Our Management is finally getting where we should have been years ago with Disaster Recovery. I need to start getting my TSM tapes off-site and need you advice. Environment: Two H70s (one test, one production), AIX 4.3.3, 3GB memory each, shared 300 GB SSA disk drawers. One 3570 Magstar dual-drive, 20-slot library. Library size=~55 C-format tapes. TSM Server/Clients 3.7.3. 10GB Primary Disk storage pool. DRM installed but never setup/used. We backup Oracle financial dbs only-no network clients. Backup size ~60GB (AIX Oracle dbs) each night. Questions: 1) How would you proceed if we need to get the TSM tapes off-site as quickly as practicable? Maybe start off with backup sets initially until something more thought-out is established? 2) Use DRM? How about Copy-pools? 3) Should I use DRM? (I know I should but I don't know the first thing about it). 4) What other options are available? Any help is appreciated. Ken Sedlacek Kyrus Corporation Office: 864-322-4260; Cell: 864-444-8375 Text Page: 864-444-7243, follow prompts [EMAIL PROTECTED] Kyrus IT Support (Internal: 4399) (Greenville: 864-322-4399) (Toll-Free: 888-413-4399)
Re: Help Needed/Point in Right Direction: Getting Tapes Off-Site
IBM has a Redbook for DR that goes through the procedure in depth that can accessed off the Tivoli web site or www.redbooks.ibm.com. Thanks, Angela --- Ken Sedlacek [EMAIL PROTECTED] wrote: TSM'ers: Our Management is finally getting where we should have been years ago with Disaster Recovery. I need to start getting my TSM tapes off-site and need you advice. Environment: Two H70s (one test, one production), AIX 4.3.3, 3GB memory each, shared 300 GB SSA disk drawers. One 3570 Magstar dual-drive, 20-slot library. Library size=~55 C-format tapes. TSM Server/Clients 3.7.3. 10GB Primary Disk storage pool. DRM installed but never setup/used. We backup Oracle financial dbs only-no network clients. Backup size ~60GB (AIX Oracle dbs) each night. Questions: 1) How would you proceed if we need to get the TSM tapes off-site as quickly as practicable? Maybe start off with backup sets initially until something more thought-out is established? 2) Use DRM? How about Copy-pools? 3) Should I use DRM? (I know I should but I don't know the first thing about it). 4) What other options are available? Any help is appreciated. Ken Sedlacek Kyrus Corporation Office: 864-322-4260; Cell: 864-444-8375 Text Page: 864-444-7243, follow prompts [EMAIL PROTECTED] Kyrus IT Support (Internal: 4399) (Greenville: 864-322-4399) (Toll-Free: 888-413-4399) __ Do You Yahoo!? Get personalized email addresses from Yahoo! Mail - only $35 a year! http://personal.mail.yahoo.com/
Re: AIX Gurus.. .Help Needed..
How about an oslevel -q ? -- Shawn Raymond Sr. Technical Consultant Synergy, Inc. 518-782-3457 Shekhar DhotreTo: [EMAIL PROTECTED] shekhar.dhotre.b@cc: BAYER.COMSubject: Re: AIX Gurus.. .Help Needed.. Sent by: "ADSM: Dist Stor Manager" [EMAIL PROTECTED] EDU 04/12/01 02:52 PM Please respond to "ADSM: Dist Stor Manager" # oslevel -l 4.3.3.0 # RETURNS NOTHING .. Shawn Raymond [EMAIL PROTECTED]@VM.MARIST.EDU on 04/12/2001 02:39:44 PM Please respond to "ADSM: Dist Stor Manager" [EMAIL PROTECTED] Sent by: "ADSM: Dist Stor Manager" [EMAIL PROTECTED] To: [EMAIL PROTECTED] cc: Subject: Re: AIX Gurus.. .Help Needed.. Run oslevel -l 4.3.3.0 to list the filesets that are not up to date. You may have to do an update_all on all 4 of the AIX 4.3.3 CD's then run the ML8 update_all again. -- Shawn Raymond Sr. Technical Consultant Synergy, Inc. 518-782-3457 Shekhar DhotreTo: [EMAIL PROTECTED] shekhar.dhotre.b@cc: BAYER.COM Subject: Re: AIX Gurus.. .Help Needed.. Sent by: "ADSM: Dist Stor Manager" [EMAIL PROTECTED] EDU 04/10/01 06:04 PM Please respond to "ADSM: Dist Stor Manager" I installed ML08 on AIX 4.3.3 .0 today and issued command # oslevel 4.3.2.0 # instfix -ik 4330-08_AIX_ML All filesets for 4330-08_AIX_ML were found. # instfix -ciqk 4330-08_AIX_ML | grep ":-:" is this ok ---4.3.2.0 ? Shekhar Dhotre UniX /Tivoli Admin . Bayer Corp. 508-520-7821 . Shawn Raymond [EMAIL PROTECTED]@VM.MARIST.EDU on 04/10/2001 08:46:03 AM Please respond to "ADSM: Dist Stor Manager" [EMAIL PROTECTED] Sent by: "ADSM: Dist Stor Manager" [EMAIL PROTECTED] To: [EMAIL PROTECTED] cc: Subject: Re: AIX Gurus.. .Help Needed.. Update your perfagent.tools to 2.2.33.50. svmon was broken in the previous few releases. -- Shawn Raymond Sr. Technical Consultant Synergy, Inc. 518-782-3457 Shekhar DhotreTo: [EMAIL PROTECTED] shekhar.dhotre.b@ cc: BAYER.COMSubject: Re: AIX Gurus.. .Help Needed.. Sent by: "ADSM: Dist Stor Manager" [EMAIL PROTECTED] EDU 04/09/01 04:53 PM Please respond to "ADSM: Dist Stor Manager" I am trying to execute svmon but , getting following error ..any idea ? medrs2:ps -aef | grep dsmserv root 42134 1 0 Apr 02 - 2474:14 dsmserv root 48518 47810 1 16:36:56 pts/10 0:00 grep dsmserv medrs2:sh /usr/bin/svmon -P 42134 sh: /usr/bin/svmon: 0403-006 Execute permission denied. medrs2:id uid=0(root) gid=0(system) groups=2(bin),3(sys),7(
Re: AIX Gurus.. .Help Needed..
I'm not completely sure of what your after but you can run lppchk -v and it will tell you if you have any inconsistencies in your filesets etc. Gene |+ || Shekhar Dhotre| || shekhar.dhotre.b@| || BAYER.COM| ||| || 04/12/01 01:52 PM | || Please respond to | || "ADSM: Dist Stor | || Manager" | ||| |+ | || | To: [EMAIL PROTECTED] | | cc: (bcc: Gene | | Greenberg/CentralOffice/RRISD) | | Subject: Re: AIX Gurus.. .Help Needed.. | | # oslevel -l 4.3.3.0 # RETURNS NOTHING .. Shawn Raymond [EMAIL PROTECTED]@VM.MARIST.EDU on 04/12/2001 02:39:44 PM Please respond to "ADSM: Dist Stor Manager" [EMAIL PROTECTED] Sent by: "ADSM: Dist Stor Manager" [EMAIL PROTECTED] To: [EMAIL PROTECTED] cc: Subject: Re: AIX Gurus.. .Help Needed.. Run oslevel -l 4.3.3.0 to list the filesets that are not up to date. You may have to do an update_all on all 4 of the AIX 4.3.3 CD's then run the ML8 update_all again. -- Shawn Raymond Sr. Technical Consultant Synergy, Inc. 518-782-3457 Shekhar DhotreTo: [EMAIL PROTECTED] shekhar.dhotre.b@cc: BAYER.COMSubject: Re: AIX Gurus.. .Help Needed.. Sent by: "ADSM: Dist Stor Manager" [EMAIL PROTECTED] EDU 04/10/01 06:04 PM Please respond to "ADSM: Dist Stor Manager" I installed ML08 on AIX 4.3.3 .0 today and issued command # oslevel 4.3.2.0 # instfix -ik 4330-08_AIX_ML All filesets for 4330-08_AIX_ML were found. # instfix -ciqk 4330-08_AIX_ML | grep ":-:" is this ok ---4.3.2.0 ? Shekhar Dhotre UniX /Tivoli Admin . Bayer Corp. 508-520-7821 . Shawn Raymond [EMAIL PROTECTED]@VM.MARIST.EDU on 04/10/2001 08:46:03 AM Please respond to "ADSM: Dist Stor Manager" [EMAIL PROTECTED] Sent by: "ADSM: Dist Stor Manager" [EMAIL PROTECTED] To: [EMAIL PROTECTED] cc: Subject: Re: AIX Gurus.. .Help Needed.. Update your perfagent.tools to 2.2.33.50. svmon was broken in the previous few releases. -- Shawn Raymond Sr. Technical Consultant Synergy, Inc. 518-782-3457 Shekhar DhotreTo: [EMAIL PROTECTED] shekhar.dhotre.b@ cc: BAYER.COMSubject: Re: AIX Gurus.. .Help Needed.. Sent by: "ADSM: Dist Stor Manager" [EMAIL PROTECTED] EDU 04/09/01 04:53 PM Please respond to "ADSM: Dist Stor Manager" I am trying to execute svmon but , getting following error ..any idea ? medrs2:ps -aef | grep dsmserv root 42134 1 0 Apr 02 - 2474:14 dsmserv root 48518 47810 1 16:36:56 pts/10 0:00 grep dsmserv medrs2:sh /usr/bin/svmon -P 42134 sh: /usr/bin/svmon: 0403-006 Execute permission denied. medrs2:id uid=0(root) gid=0(system) groups=2(bin),3(sys),7(security),8(cron),10(audit) medrs2: medrs2:svmon open: No such file or directory medrs2:/usr/bin/svmon open: No such file or directory medrs2:cd /usr/bin medrs2:./svmon open: No such file or directory medrs2:sh svmon sh: svmon: 0403-006 Execute permission denied. medrs2:echo $PATH /usr/bin:/etc:/usr/sbin:/usr/ucb:/usr/bin/X11:/sbin Thanks shekhar .. George Lesho [EMAIL PROTECTED]@VM.MARIST.EDU on 04/09/2001 03:19:45 PM Please respond to "ADSM: Dist Stor Manager" [EMAIL PROTECTED] Sent by: "ADSM: Dist Stor Manager" [EMAIL PROTECTED] To: [EMAIL PROTECTED] cc: Subject: Re: AIX Gurus.. .Help Needed.. Herve, Where am going wrong here??? # ps -aef | grep dsmserv root 30300 34772 0 Apr 07 - 606:00 dsmserv quiet # svmon -P 30300 Pid Command Inuse Pin Pgspace 64-bit 30300*** process does not exist *** Drop me a note off line and help me out... I am not sure why it is coming back and saying that my TSM server is not running thanks- George Lesho Storage/System Admin AFC Enterprises "Chibois, Herve" [EMAIL PROTECTED] on 04/06/2001 10:2
Re: AIX Gurus.. .Help Needed..
Run oslevel -l 4.3.3.0 to list the filesets that are not up to date. You may have to do an update_all on all 4 of the AIX 4.3.3 CD's then run the ML8 update_all again. -- Shawn Raymond Sr. Technical Consultant Synergy, Inc. 518-782-3457 Shekhar DhotreTo: [EMAIL PROTECTED] shekhar.dhotre.b@cc: BAYER.COMSubject: Re: AIX Gurus.. .Help Needed.. Sent by: "ADSM: Dist Stor Manager" [EMAIL PROTECTED] EDU 04/10/01 06:04 PM Please respond to "ADSM: Dist Stor Manager" I installed ML08 on AIX 4.3.3 .0 today and issued command # oslevel 4.3.2.0 # instfix -ik 4330-08_AIX_ML All filesets for 4330-08_AIX_ML were found. # instfix -ciqk 4330-08_AIX_ML | grep ":-:" is this ok ---4.3.2.0 ? Shekhar Dhotre UniX /Tivoli Admin . Bayer Corp. 508-520-7821 . Shawn Raymond [EMAIL PROTECTED]@VM.MARIST.EDU on 04/10/2001 08:46:03 AM Please respond to "ADSM: Dist Stor Manager" [EMAIL PROTECTED] Sent by: "ADSM: Dist Stor Manager" [EMAIL PROTECTED] To: [EMAIL PROTECTED] cc: Subject: Re: AIX Gurus.. .Help Needed.. Update your perfagent.tools to 2.2.33.50. svmon was broken in the previous few releases. -- Shawn Raymond Sr. Technical Consultant Synergy, Inc. 518-782-3457 Shekhar DhotreTo: [EMAIL PROTECTED] shekhar.dhotre.b@cc: BAYER.COM Subject: Re: AIX Gurus.. .Help Needed.. Sent by: "ADSM: Dist Stor Manager" [EMAIL PROTECTED] EDU 04/09/01 04:53 PM Please respond to "ADSM: Dist Stor Manager" I am trying to execute svmon but , getting following error ..any idea ? medrs2:ps -aef | grep dsmserv root 42134 1 0 Apr 02 - 2474:14 dsmserv root 48518 47810 1 16:36:56 pts/10 0:00 grep dsmserv medrs2:sh /usr/bin/svmon -P 42134 sh: /usr/bin/svmon: 0403-006 Execute permission denied. medrs2:id uid=0(root) gid=0(system) groups=2(bin),3(sys),7(security),8(cron),10(audit) medrs2: medrs2:svmon open: No such file or directory medrs2:/usr/bin/svmon open: No such file or directory medrs2:cd /usr/bin medrs2:./svmon open: No such file or directory medrs2:sh svmon sh: svmon: 0403-006 Execute permission denied. medrs2:echo $PATH /usr/bin:/etc:/usr/sbin:/usr/ucb:/usr/bin/X11:/sbin Thanks shekhar .. George Lesho [EMAIL PROTECTED]@VM.MARIST.EDU on 04/09/2001 03:19:45 PM Please respond to "ADSM: Dist Stor Manager" [EMAIL PROTECTED] Sent by: "ADSM: Dist Stor Manager" [EMAIL PROTECTED] To: [EMAIL PROTECTED] cc: Subject: Re: AIX Gurus.. .Help Needed.. Herve, Where am going wrong here??? # ps -aef | grep dsmserv root 30300 34772 0 Apr 07 - 606:00 dsmserv quiet # svmon -P 30300 Pid Command Inuse Pin Pgspace 64-bit 30300*** process does not exist *** Drop me a note off line and help me out... I
Re: AIX Gurus.. .Help Needed..
# oslevel -l 4.3.3.0 # RETURNS NOTHING .. Shawn Raymond [EMAIL PROTECTED]@VM.MARIST.EDU on 04/12/2001 02:39:44 PM Please respond to "ADSM: Dist Stor Manager" [EMAIL PROTECTED] Sent by: "ADSM: Dist Stor Manager" [EMAIL PROTECTED] To: [EMAIL PROTECTED] cc: Subject: Re: AIX Gurus.. .Help Needed.. Run oslevel -l 4.3.3.0 to list the filesets that are not up to date. You may have to do an update_all on all 4 of the AIX 4.3.3 CD's then run the ML8 update_all again. -- Shawn Raymond Sr. Technical Consultant Synergy, Inc. 518-782-3457 Shekhar DhotreTo: [EMAIL PROTECTED] shekhar.dhotre.b@cc: BAYER.COMSubject: Re: AIX Gurus.. .Help Needed.. Sent by: "ADSM: Dist Stor Manager" [EMAIL PROTECTED] EDU 04/10/01 06:04 PM Please respond to "ADSM: Dist Stor Manager" I installed ML08 on AIX 4.3.3 .0 today and issued command # oslevel 4.3.2.0 # instfix -ik 4330-08_AIX_ML All filesets for 4330-08_AIX_ML were found. # instfix -ciqk 4330-08_AIX_ML | grep ":-:" is this ok ---4.3.2.0 ? Shekhar Dhotre UniX /Tivoli Admin . Bayer Corp. 508-520-7821 . Shawn Raymond [EMAIL PROTECTED]@VM.MARIST.EDU on 04/10/2001 08:46:03 AM Please respond to "ADSM: Dist Stor Manager" [EMAIL PROTECTED] Sent by: "ADSM: Dist Stor Manager" [EMAIL PROTECTED] To: [EMAIL PROTECTED] cc: Subject: Re: AIX Gurus.. .Help Needed.. Update your perfagent.tools to 2.2.33.50. svmon was broken in the previous few releases. -- Shawn Raymond Sr. Technical Consultant Synergy, Inc. 518-782-3457 Shekhar DhotreTo: [EMAIL PROTECTED] shekhar.dhotre.b@cc: BAYER.COMSubject: Re: AIX Gurus.. .Help Needed.. Sent by: "ADSM: Dist Stor Manager" [EMAIL PROTECTED] EDU 04/09/01 04:53 PM Please respond to "ADSM: Dist Stor Manager" I am trying to execute svmon but , getting following error ..any idea ? medrs2:ps -aef | grep dsmserv root 42134 1 0 Apr 02 - 2474:14 dsmserv root 48518 47810 1 16:36:56 pts/10 0:00 grep dsmserv medrs2:sh /usr/bin/svmon -P 42134 sh: /usr/bin/svmon: 0403-006 Execute permission denied. medrs2:id uid=0(root) gid=0(system) groups=2(bin),3(sys),7(security),8(cron),10(audit) medrs2: medrs2:svmon open: No such file or directory medrs2:/usr/bin/svmon open: No such file or directory medrs2:cd /usr/bin medrs2:./svmon open: No such file or directory medrs2:sh svmon sh: svmon: 0403-006 Execute permission denied. medrs2:echo $PATH /usr/bin:/etc:/usr/sbin:/usr/ucb:/usr/bin/X11:/sbin Thanks shekhar .. George Lesho [EMAIL PROTECTED]@VM.MARIST.EDU on 04/09/2001 03:19:45 PM Please respond to "ADSM: Dist Stor Manager" [EMAIL PROTECTED] Sent by: "ADSM: Dist Stor Manager" [EMAIL PROTECTED] To: [EMAIL PROTECTED] cc: Subject: Re: AIX Gurus.. .Help Needed.. Herve, Where am going wrong here??? # ps -aef | grep dsmserv root 30300 34772 0 Apr 07 - 606:00 dsmserv quiet # svmon -P 30300 Pid Command Inuse Pin Pgspace 64-bit 30300*** process does not exist *** Drop me a note off line and help me out... I am not sure why it is coming back and saying that my TSM server is not running thanks- George Lesho Storage/System Admin AFC Enterprises "Chibois, Herve" [EMAIL PROTECTED] on 04/06/2001 10:23:05 AM Please respond to "ADSM: Dist Stor Manager" [EMAIL PROTECTED] To: [EMAIL PROTECTED] cc:(bcc: George Lesho/Partners/AFC) Fax to: Subject: Re: AIX Gurus.. .Help Needed.. Hi Richard, to know exactly how many RAM TSM is eating, try the following : % ps -eaf | grep dsmserv -- GET PID % svmon -P pid --- physical RAM pages (4Ko) ---+ v Pid CommandInusePin Pgspace 11638 dsmserv.4255741 1637293 | Pid: 11638+ 217 MB Command: dsmserv.42 Segid Type Description InusePin Pgspace Address Range 1ba6 pers /dev/hd3:93 0 00 0..0 7a1 pers /dev/hd3:88 0 00 0..0 ... Hope this helps rv -Message d'origine- De : Dearman, Richard [mailto:[EMAIL PROT
Re: AIX Gurus.. .Help Needed..
Hi George in 4.3.2 you can use the 2.2.32.7 version. 2.2.33.x needs 4.3.3 for your OS. -Message d'origine- De : George Lesho [mailto:[EMAIL PROTECTED]] Envoy : mardi 10 avril 2001 21:43 : [EMAIL PROTECTED] Objet : Re: AIX Gurus.. .Help Needed.. Shawn, This is not as simple as it sounds, I am at 4.3.2 maint level 0 and require two maint level upgrades to be able to install the new perfagent.tools fileset. We will be going to 4.3.3 soon on all our boxes and the one we are testing currently is at 4.3.3 -07 and svmon works great there. Will probably just hang in there until I get the O/S upgraded to avoid having to fumble through a change control process to upgrade 4.3.2 when 4.3.3 has already been approved. Thanks George Lesho Storage/System Admin AFC Enterprises Shawn Raymond [EMAIL PROTECTED] on 04/10/2001 07:46:03 AM Please respond to "ADSM: Dist Stor Manager" [EMAIL PROTECTED] To: [EMAIL PROTECTED] cc:(bcc: George Lesho/Partners/AFC) Fax to: Subject: Re: AIX Gurus.. .Help Needed.. Update your perfagent.tools to 2.2.33.50. svmon was broken in the previous few releases. -- Shawn Raymond Sr. Technical Consultant Synergy, Inc. 518-782-3457 Shekhar DhotreTo: [EMAIL PROTECTED] shekhar.dhotre.b@cc: BAYER.COMSubject: Re: AIX Gurus.. .Help Needed.. Sent by: "ADSM: Dist Stor Manager" [EMAIL PROTECTED] EDU 04/09/01 04:53 PM Please respond to "ADSM: Dist Stor Manager" I am trying to execute svmon but , getting following error ..any idea ? medrs2:ps -aef | grep dsmserv root 42134 1 0 Apr 02 - 2474:14 dsmserv root 48518 47810 1 16:36:56 pts/10 0:00 grep dsmserv medrs2:sh /usr/bin/svmon -P 42134 sh: /usr/bin/svmon: 0403-006 Execute permission denied. medrs2:id uid=0(root) gid=0(system) groups=2(bin),3(sys),7(security),8(cron),10(audit) medrs2: medrs2:svmon open: No such file or directory medrs2:/usr/bin/svmon open: No such file or directory medrs2:cd /usr/bin medrs2:./svmon open: No such file or directory medrs2:sh svmon sh: svmon: 0403-006 Execute permission denied. medrs2:echo $PATH /usr/bin:/etc:/usr/sbin:/usr/ucb:/usr/bin/X11:/sbin Thanks shekhar .. George Lesho [EMAIL PROTECTED]@VM.MARIST.EDU on 04/09/2001 03:19:45 PM Please respond to "ADSM: Dist Stor Manager" [EMAIL PROTECTED] Sent by: "ADSM: Dist Stor Manager" [EMAIL PROTECTED] To: [EMAIL PROTECTED] cc: Subject: Re: AIX Gurus.. .Help Needed.. Herve, Where am going wrong here??? # ps -aef | grep dsmserv root 30300 34772 0 Apr 07 - 606:00 dsmserv quiet # svmon -P 30300 Pid Command Inuse Pin Pgspace 64-bit 30300*** process does not exist *** Drop me a note off line and help me out... I am not sure why it is coming back and saying that my TSM server is not running thanks- George Lesho Storage/System Admin AFC Enterprises "Chibois, Herve" [EMAIL PROTECTED] on 04/06/2001 10:23:05 AM Please respond to "ADSM: Dist Stor Manager" [EMAIL PROTECTED] To: [EMAIL PROTECTED] cc:(bcc: George Lesho/Partners/AFC) Fax to: Subject: Re: AIX Gurus.. .Help Needed.. Hi Richard, to know exactly how many RAM TSM is eating, try the following : % ps -eaf | grep dsmserv -- GET PID % svmon -P pid --- physical RAM pages (4Ko) ---+ v Pid CommandInusePin Pgspace 11638 dsmserv.4255741 16 37293 | Pid: 11638+ 217 MB Command: dsmserv.42 Segid Type Description InusePin Pgspace Address Range 1ba6 pers /dev/hd3:93 0 00 0..0 7a1 pers /dev/hd3:88 0 00 0..0 ... Hope this helps rv -Message d'origine- De : Dearman, Richard [mailto:[EMAIL PROTECTED]] Envoy
Re: AIX Gurus.. .Help Needed..
can you do a "ls -l /usr/bin/svmon" and "file /usr/bin/svmon"? Cheers, Suad -- I am trying to execute svmon but , getting following error ..any idea ? medrs2:ps -aef | grep dsmserv root 42134 1 0 Apr 02 - 2474:14 dsmserv root 48518 47810 1 16:36:56 pts/10 0:00 grep dsmserv medrs2:sh /usr/bin/svmon -P 42134 sh: /usr/bin/svmon: 0403-006 Execute permission denied. medrs2:id uid=0(root) gid=0(system) groups=2(bin),3(sys),7(security),8(cron),10(audit) medrs2: medrs2:svmon open: No such file or directory medrs2:/usr/bin/svmon open: No such file or directory medrs2:cd /usr/bin medrs2:./svmon open: No such file or directory medrs2:sh svmon sh: svmon: 0403-006 Execute permission denied. medrs2:echo $PATH /usr/bin:/etc:/usr/sbin:/usr/ucb:/usr/bin/X11:/sbin Thanks shekhar .. George Lesho [EMAIL PROTECTED]@VM.MARIST.EDU on 04/09/2001 03:19:45 PM Please respond to "ADSM: Dist Stor Manager" [EMAIL PROTECTED] Sent by: "ADSM: Dist Stor Manager" [EMAIL PROTECTED] To: [EMAIL PROTECTED] cc: Subject: Re: AIX Gurus.. .Help Needed.. Herve, Where am going wrong here??? # ps -aef | grep dsmserv root 30300 34772 0 Apr 07 - 606:00 dsmserv quiet # svmon -P 30300 Pid Command Inuse Pin Pgspace 64-bit 30300*** process does not exist *** Drop me a note off line and help me out... I am not sure why it is coming back and saying that my TSM server is not running thanks- George Lesho Storage/System Admin AFC Enterprises "Chibois, Herve" [EMAIL PROTECTED] on 04/06/2001 10:23:05 AM Please respond to "ADSM: Dist Stor Manager" [EMAIL PROTECTED] To: [EMAIL PROTECTED] cc:(bcc: George Lesho/Partners/AFC) Fax to: Subject: Re: AIX Gurus.. .Help Needed.. Hi Richard, to know exactly how many RAM TSM is eating, try the following : % ps -eaf | grep dsmserv -- GET PID % svmon -P pid --- physical RAM pages (4Ko) ---+ v Pid CommandInusePin Pgspace 11638 dsmserv.4255741 1637293 | Pid: 11638+ 217 MB Command: dsmserv.42 Segid Type Description InusePin Pgspace Address Range 1ba6 pers /dev/hd3:93 0 00 0..0 7a1 pers /dev/hd3:88 0 00 0..0 ... Hope this helps rv -Message d'origine- De : Dearman, Richard [mailto:[EMAIL PROTECTED]] Envoy : vendredi 6 avril 2001 17:17 : [EMAIL PROTECTED] Objet : AIX Gurus.. .Help Needed.. I use the "top"utility to monitor my server adsm server load. I noticed that the Real memory statement is showing 812M files is being used. What does the files statement mean? it seems whatever files means is taking up all of my memory. Load averages: 0.10, 0.04, 0.04 adsmsrv1Fri Apr 6 10:15:50 2001 Cpu states: 0.7% user 3.5% system 7.8% wait 88.0% idle For non-commercial Logged on: 1 users 1 active 1 remote 00:10 sleep time use only !!! Real memory: 211.6M procs 812.0M files0.5M free 1024.0M total Virtual memory: 137.6M used 3574.4M free 3712.0M total ***EMAIL DISCLAIMER** This e-mail and any files transmitted with it may be confidential and are intended solely for the use of the individual or entity to whom they are addressed. If you are not the intended recipient or the individual responsible for delivering the e-mail to the intended recipient, any disclosure, copying, distribution or any action taken or omitted to be taken in reliance on it, is strictly prohibited. If you have received this e-mail in error, please delete it and notify the sender or contact Health Information Management (312) 996-3941.
Re: AIX Gurus.. .Help Needed..
Do you have the perfagent.tools fileset installed? You should be at 2.2.33.50 for svmon to work right on AIX 4.3.3. -- Shawn Raymond Sr. Technical Consultant Synergy, Inc. 518-782-3457 Herv CHIBOIS chibois_h@ADTo: [EMAIL PROTECTED] MIRAL.FRcc: Sent by: Subject: Re: AIX Gurus.. .Help Needed.. "ADSM: Dist Stor Manager" [EMAIL PROTECTED] RIST.EDU 04/09/01 05:07 PM Please respond to "ADSM: Dist Stor Manager" Hi Shekhar, Have you installed SAR and IOSTAT ? SAR like SVMON needs to write in a particular directory, which must exists before launching the command If yes, test if you can run them without any permission pb; root # sar 2 10 Haven't you reached your Ulimit ? I will check this tomorrow, keep on searching. rv - Original Message - From: "Shekhar Dhotre" [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Monday, April 09, 2001 10:53 PM Subject: Re: AIX Gurus.. .Help Needed.. I am trying to execute svmon but , getting following error ..any idea ? medrs2:ps -aef | grep dsmserv root 42134 1 0 Apr 02 - 2474:14 dsmserv root 48518 47810 1 16:36:56 pts/10 0:00 grep dsmserv medrs2:sh /usr/bin/svmon -P 42134 sh: /usr/bin/svmon: 0403-006 Execute permission denied. medrs2:id uid=0(root) gid=0(system) groups=2(bin),3(sys),7(security),8(cron),10(audit) medrs2: medrs2:svmon open: No such file or directory medrs2:/usr/bin/svmon open: No such file or directory medrs2:cd /usr/bin medrs2:./svmon open: No such file or directory medrs2:sh svmon sh: svmon: 0403-006 Execute permission denied. medrs2:echo $PATH /usr/bin:/etc:/usr/sbin:/usr/ucb:/usr/bin/X11:/sbin Thanks shekhar .. George Lesho [EMAIL PROTECTED]@VM.MARIST.EDU on 04/09/2001 03:19:45 PM Please respond to "ADSM: Dist Stor Manager" [EMAIL PROTECTED] Sent by: "ADSM: Dist Stor Manager" [EMAIL PROTECTED] To: [EMAIL PROTECTED] cc: Subject: Re: AIX Gurus.. .Help Needed.. Herve, Where am going wrong here??? # ps -aef | grep dsmserv root 30300 34772 0 Apr 07 - 606:00 dsmserv quiet # svmon -P 30300 Pid Command Inuse Pin Pgspace 64-bit 30300*** process does not exist *** Drop me a note off line and help me out... I am not sure why it is coming back and saying that my TSM server is not running thanks- George Lesho Storage/System Admin AFC Enterprises "Chibois, Herve" [EMAIL PROTECTED] on 04/06/2001 10:23:05 AM Please respond to "ADSM: Dist Stor Manager" [EMAIL PROTECTED] To: [EMAIL PROTECTED] cc: (bcc: George Lesho/Partners/AFC) Fax to: Subject: Re: AIX Gurus.. .Help Needed.. Hi Richard, to know exactly how many RAM TSM is eating, try the following : % ps -eaf | grep dsmserv -- GET PID % svmon -P pid --- physical RAM pages (4Ko) ---+ v Pid CommandInusePin
Re: AIX Gurus.. .Help Needed..
Update your perfagent.tools to 2.2.33.50. svmon was broken in the previous few releases. -- Shawn Raymond Sr. Technical Consultant Synergy, Inc. 518-782-3457 Shekhar DhotreTo: [EMAIL PROTECTED] shekhar.dhotre.b@cc: BAYER.COMSubject: Re: AIX Gurus.. .Help Needed.. Sent by: "ADSM: Dist Stor Manager" [EMAIL PROTECTED] EDU 04/09/01 04:53 PM Please respond to "ADSM: Dist Stor Manager" I am trying to execute svmon but , getting following error ..any idea ? medrs2:ps -aef | grep dsmserv root 42134 1 0 Apr 02 - 2474:14 dsmserv root 48518 47810 1 16:36:56 pts/10 0:00 grep dsmserv medrs2:sh /usr/bin/svmon -P 42134 sh: /usr/bin/svmon: 0403-006 Execute permission denied. medrs2:id uid=0(root) gid=0(system) groups=2(bin),3(sys),7(security),8(cron),10(audit) medrs2: medrs2:svmon open: No such file or directory medrs2:/usr/bin/svmon open: No such file or directory medrs2:cd /usr/bin medrs2:./svmon open: No such file or directory medrs2:sh svmon sh: svmon: 0403-006 Execute permission denied. medrs2:echo $PATH /usr/bin:/etc:/usr/sbin:/usr/ucb:/usr/bin/X11:/sbin Thanks shekhar .. George Lesho [EMAIL PROTECTED]@VM.MARIST.EDU on 04/09/2001 03:19:45 PM Please respond to "ADSM: Dist Stor Manager" [EMAIL PROTECTED] Sent by: "ADSM: Dist Stor Manager" [EMAIL PROTECTED] To: [EMAIL PROTECTED] cc: Subject: Re: AIX Gurus.. .Help Needed.. Herve, Where am going wrong here??? # ps -aef | grep dsmserv root 30300 34772 0 Apr 07 - 606:00 dsmserv quiet # svmon -P 30300 Pid Command Inuse Pin Pgspace 64-bit 30300*** process does not exist *** Drop me a note off line and help me out... I am not sure why it is coming back and saying that my TSM server is not running thanks- George Lesho Storage/System Admin AFC Enterprises "Chibois, Herve" [EMAIL PROTECTED] on 04/06/2001 10:23:05 AM Please respond to "ADSM: Dist Stor Manager" [EMAIL PROTECTED] To: [EMAIL PROTECTED] cc:(bcc: George Lesho/Partners/AFC) Fax to: Subject: Re: AIX Gurus.. .Help Needed.. Hi Richard, to know exactly how many RAM TSM is eating, try the following : % ps -eaf | grep dsmserv -- GET PID % svmon -P pid --- physical RAM pages (4Ko) ---+ v Pid CommandInusePin Pgspace 11638 dsmserv.4255741 1637293 | Pid: 11638+ 217 MB Command: dsmserv.42 Segid Type Description InusePin Pgspace Address Range 1ba6 pers /dev/hd3:93 0 00 0..0 7a1 pers /dev/hd3:88 0 00 0..0 ... Hope this helps rv -Message d'origine- De : Dearman, Richard [mailto:[EMAIL PROTECTED]] Envoy : vendredi 6 avril 2001 17:17 : [EMAIL PROTECTED] Objet : AIX Gurus.. .Help Needed.. I use the "top"utility to monitor my server adsm se
Re: AIX Gurus.. .Help Needed..
medrs2:ls -l /usr/bin/svmon -r-x-- 1 root system 7318 Aug 05 1999 /usr/bin/svmon medrs2:file /usr/bin/svmon /usr/bin/svmon: executable (RISC System/6000) or object module Suad Musovich [EMAIL PROTECTED]@VM.MARIST.EDU on 04/10/2001 02:24:45 AM Please respond to "ADSM: Dist Stor Manager" [EMAIL PROTECTED] Sent by: "ADSM: Dist Stor Manager" [EMAIL PROTECTED] To: [EMAIL PROTECTED] cc: Subject: Re: AIX Gurus.. .Help Needed.. can you do a "ls -l /usr/bin/svmon" and "file /usr/bin/svmon"? Cheers, Suad -- I am trying to execute svmon but , getting following error ..any idea ? medrs2:ps -aef | grep dsmserv root 42134 1 0 Apr 02 - 2474:14 dsmserv root 48518 47810 1 16:36:56 pts/10 0:00 grep dsmserv medrs2:sh /usr/bin/svmon -P 42134 sh: /usr/bin/svmon: 0403-006 Execute permission denied. medrs2:id uid=0(root) gid=0(system) groups=2(bin),3(sys),7(security),8(cron),10(audit) medrs2: medrs2:svmon open: No such file or directory medrs2:/usr/bin/svmon open: No such file or directory medrs2:cd /usr/bin medrs2:./svmon open: No such file or directory medrs2:sh svmon sh: svmon: 0403-006 Execute permission denied. medrs2:echo $PATH /usr/bin:/etc:/usr/sbin:/usr/ucb:/usr/bin/X11:/sbin Thanks shekhar .. George Lesho [EMAIL PROTECTED]@VM.MARIST.EDU on 04/09/2001 03:19:45 PM Please respond to "ADSM: Dist Stor Manager" [EMAIL PROTECTED] Sent by: "ADSM: Dist Stor Manager" [EMAIL PROTECTED] To: [EMAIL PROTECTED] cc: Subject: Re: AIX Gurus.. .Help Needed.. Herve, Where am going wrong here??? # ps -aef | grep dsmserv root 30300 34772 0 Apr 07 - 606:00 dsmserv quiet # svmon -P 30300 Pid Command Inuse Pin Pgspace 64-bit 30300*** process does not exist *** Drop me a note off line and help me out... I am not sure why it is coming back and saying that my TSM server is not running thanks- George Lesho Storage/System Admin AFC Enterprises "Chibois, Herve" [EMAIL PROTECTED] on 04/06/2001 10:23:05 AM Please respond to "ADSM: Dist Stor Manager" [EMAIL PROTECTED] To: [EMAIL PROTECTED] cc:(bcc: George Lesho/Partners/AFC) Fax to: Subject: Re: AIX Gurus.. .Help Needed.. Hi Richard, to know exactly how many RAM TSM is eating, try the following : % ps -eaf | grep dsmserv -- GET PID % svmon -P pid --- physical RAM pages (4Ko) ---+ v Pid CommandInusePin Pgspace 11638 dsmserv.4255741 1637293 | Pid: 11638+ 217 MB Command: dsmserv.42 Segid Type Description InusePin Pgspace Address Range 1ba6 pers /dev/hd3:93 0 00 0..0 7a1 pers /dev/hd3:88 0 00 0..0 ... Hope this helps rv -Message d'origine- De : Dearman, Richard [mailto:[EMAIL PROTECTED]] Envoy : vendredi 6 avril 2001 17:17 : [EMAIL PROTECTED] Objet : AIX Gurus.. .Help Needed.. I use the "top"utility to monitor my server adsm server load. I noticed that the Real memory statement is showing 812M files is being used. What does the files statement mean? it seems whatever files means is taking up all of my memory. Load averages: 0.10, 0.04, 0.04 adsmsrv1Fri Apr 6 10:15:50 2001 Cpu states: 0.7% user 3.5% system 7.8% wait 88.0% idle For non-commercial Logged on: 1 users 1 active 1 remote 00:10 sleep time use only !!! Real memory: 211.6M procs 812.0M files0.5M free 1024.0M total Virtual memory: 137.6M used 3574.4M free 3712.0M total ***EMAIL DISCLAIMER** This e-mail and any files transmitted with it may be confidential and are intended solely for the use of the individual or entity to whom they are addressed. If you are not the intended recipient or the individual responsible for delivering the e-mail to the intended recipient, any disclosure, copying, distribution or any action taken or omitted to be taken in reliance on it, is strictly prohibited. If you have received this e-mail in error, please delete it and notify the sender or contact Health Information Management (312) 996-3941. =?iso-8859-1?Q?$RFC822.eml?=
Re: AIX Gurus.. .Help Needed..
I will be getting ML-8 for AIX tomorow , So i have to wait till tomorow .. Shekhar. Shawn Raymond [EMAIL PROTECTED]@VM.MARIST.EDU on 04/10/2001 08:46:03 AM Please respond to "ADSM: Dist Stor Manager" [EMAIL PROTECTED] Sent by: "ADSM: Dist Stor Manager" [EMAIL PROTECTED] To: [EMAIL PROTECTED] cc: Subject: Re: AIX Gurus.. .Help Needed.. Update your perfagent.tools to 2.2.33.50. svmon was broken in the previous few releases. -- Shawn Raymond Sr. Technical Consultant Synergy, Inc. 518-782-3457 Shekhar DhotreTo: [EMAIL PROTECTED] shekhar.dhotre.b@cc: BAYER.COMSubject: Re: AIX Gurus.. .Help Needed.. Sent by: "ADSM: Dist Stor Manager" [EMAIL PROTECTED] EDU 04/09/01 04:53 PM Please respond to "ADSM: Dist Stor Manager" I am trying to execute svmon but , getting following error ..any idea ? medrs2:ps -aef | grep dsmserv root 42134 1 0 Apr 02 - 2474:14 dsmserv root 48518 47810 1 16:36:56 pts/10 0:00 grep dsmserv medrs2:sh /usr/bin/svmon -P 42134 sh: /usr/bin/svmon: 0403-006 Execute permission denied. medrs2:id uid=0(root) gid=0(system) groups=2(bin),3(sys),7(security),8(cron),10(audit) medrs2: medrs2:svmon open: No such file or directory medrs2:/usr/bin/svmon open: No such file or directory medrs2:cd /usr/bin medrs2:./svmon open: No such file or directory medrs2:sh svmon sh: svmon: 0403-006 Execute permission denied. medrs2:echo $PATH /usr/bin:/etc:/usr/sbin:/usr/ucb:/usr/bin/X11:/sbin Thanks shekhar .. George Lesho [EMAIL PROTECTED]@VM.MARIST.EDU on 04/09/2001 03:19:45 PM Please respond to "ADSM: Dist Stor Manager" [EMAIL PROTECTED] Sent by: "ADSM: Dist Stor Manager" [EMAIL PROTECTED] To: [EMAIL PROTECTED] cc: Subject: Re: AIX Gurus.. .Help Needed.. Herve, Where am going wrong here??? # ps -aef | grep dsmserv root 30300 34772 0 Apr 07 - 606:00 dsmserv quiet # svmon -P 30300 Pid Command Inuse Pin Pgspace 64-bit 30300*** process does not exist *** Drop me a note off line and help me out... I am not sure why it is coming back and saying that my TSM server is not running thanks- George Lesho Storage/System Admin AFC Enterprises "Chibois, Herve" [EMAIL PROTECTED] on 04/06/2001 10:23:05 AM Please respond to "ADSM: Dist Stor Manager" [EMAIL PROTECTED] To: [EMAIL PROTECTED] cc: (bcc: George Lesho/Partners/AFC) Fax to: Subject: Re: AIX Gurus.. .Help Needed.. Hi Richard, to know exactly how many RAM TSM is eating, try the following : % ps -eaf | grep dsmserv -- GET PID % svmon -P pid --- physical RAM pages (4Ko) ---+ v Pid CommandInusePin Pgspace 11638 dsmserv.4255741 1637293 | Pid: 11638+ 217 MB Command: dsmserv.42 Segid Type Description InusePin Pgspace Address Range 1ba6 pers /dev/hd3:93 0 00 0..0 7a1 pers /dev/hd3:88 0 00 0..0 ... Hope this helps rv -Message d'origine- De : Dearman, Richard [mailto:[EMAIL PROTECTED]] Envoy : vendredi 6 avril 2001 17:17 : [EMAIL PROTECTED] Objet : AIX Gurus.. .Help Needed.. I use the "top"utility to monitor my server adsm server load. I noticed that the Real memory statement is showing 812M files is being used. What does the files statement mean? it seems whatever files means is taking up all of my memory. Load averages: 0.10, 0.04, 0.04 adsmsrv1Fri Apr 6 10:15:50 2001 Cpu states: 0.7% user 3.5% system 7.8% wait 88.0% idle For non-commercial Logged on: 1 users 1 active 1 remote 00:10 sleep time use only !!! Real memory: 211.6M procs 812.0M files0.5M free 1024.0M total Virtual memory: 137.6M used 3574.4M free 3712.0M total ***EMAIL DISCLAIMER** This e-mail and any files transmitted with it may be confidential and are intended solely for the use of the individual or entity to whom they are addressed. If you are not the intended recipient or the individual responsible for delivering the e-mail to the intended recipient, any disclosure, copying, distribution or any action taken or omitted to be taken in reliance on it, is strictly prohibited. If you have received this e-mail in error, please delete it and notify the sender or contact He
Re: AIX Gurus.. .Help Needed..
Shawn, This is not as simple as it sounds, I am at 4.3.2 maint level 0 and require two maint level upgrades to be able to install the new perfagent.tools fileset. We will be going to 4.3.3 soon on all our boxes and the one we are testing currently is at 4.3.3 -07 and svmon works great there. Will probably just hang in there until I get the O/S upgraded to avoid having to fumble through a change control process to upgrade 4.3.2 when 4.3.3 has already been approved. Thanks George Lesho Storage/System Admin AFC Enterprises Shawn Raymond [EMAIL PROTECTED] on 04/10/2001 07:46:03 AM Please respond to "ADSM: Dist Stor Manager" [EMAIL PROTECTED] To: [EMAIL PROTECTED] cc:(bcc: George Lesho/Partners/AFC) Fax to: Subject: Re: AIX Gurus.. .Help Needed.. Update your perfagent.tools to 2.2.33.50. svmon was broken in the previous few releases. -- Shawn Raymond Sr. Technical Consultant Synergy, Inc. 518-782-3457 Shekhar DhotreTo: [EMAIL PROTECTED] shekhar.dhotre.b@cc: BAYER.COMSubject: Re: AIX Gurus.. .Help Needed.. Sent by: "ADSM: Dist Stor Manager" [EMAIL PROTECTED] EDU 04/09/01 04:53 PM Please respond to "ADSM: Dist Stor Manager" I am trying to execute svmon but , getting following error ..any idea ? medrs2:ps -aef | grep dsmserv root 42134 1 0 Apr 02 - 2474:14 dsmserv root 48518 47810 1 16:36:56 pts/10 0:00 grep dsmserv medrs2:sh /usr/bin/svmon -P 42134 sh: /usr/bin/svmon: 0403-006 Execute permission denied. medrs2:id uid=0(root) gid=0(system) groups=2(bin),3(sys),7(security),8(cron),10(audit) medrs2: medrs2:svmon open: No such file or directory medrs2:/usr/bin/svmon open: No such file or directory medrs2:cd /usr/bin medrs2:./svmon open: No such file or directory medrs2:sh svmon sh: svmon: 0403-006 Execute permission denied. medrs2:echo $PATH /usr/bin:/etc:/usr/sbin:/usr/ucb:/usr/bin/X11:/sbin Thanks shekhar .. George Lesho [EMAIL PROTECTED]@VM.MARIST.EDU on 04/09/2001 03:19:45 PM Please respond to "ADSM: Dist Stor Manager" [EMAIL PROTECTED] Sent by: "ADSM: Dist Stor Manager" [EMAIL PROTECTED] To: [EMAIL PROTECTED] cc: Subject: Re: AIX Gurus.. .Help Needed.. Herve, Where am going wrong here??? # ps -aef | grep dsmserv root 30300 34772 0 Apr 07 - 606:00 dsmserv quiet # svmon -P 30300 Pid Command Inuse Pin Pgspace 64-bit 30300*** process does not exist *** Drop me a note off line and help me out... I am not sure why it is coming back and saying that my TSM server is not running thanks- George Lesho Storage/System Admin AFC Enterprises "Chibois, Herve" [EMAIL PROTECTED] on 04/06/2001 10:23:05 AM Please respond to "ADSM: Dist Stor Manager" [EMAIL PROTECTED] To: [EMAIL PROTECTED] cc: (bcc: George Lesho/Partners/AFC) Fax to: Subject: Re: AIX Gurus.. .Help Needed.. Hi Richard, to know exactly how many RAM TSM is eating, try the following : % ps -eaf | grep dsmserv -- GET PID % svmon -P pid --- physical RAM pages (4Ko) ---+ v Pid CommandInusePin Pgspace 11638 dsmserv.4255741 1637293 | Pid: 11638+ 217 MB Command: dsmserv.42 Segid Type Description InusePin Pgspace Address Range 1ba6 pers /dev/hd3:93 0 00 0..0 7a1 pers /dev/hd3:88 0 00 0..0 ... Hope this helps rv -Message d'origine- De : Dearman, Richard [mailto:[EMAIL PROTECTED]] Envoy : vendredi 6 avril 2001 17:17 : [EMAIL PROTECTED] Objet : AIX Gurus.. .Help Needed.. I use the "top"utility to monitor my server adsm server load. I noticed that the Real memory statement is showing 812M files is being used. What does the files statement mean? it seems whatever files means is taking up all of my memory. Load averages: 0.10, 0.04, 0.04 adsmsrv1Fri Apr 6 10:15:50 2001 Cpu states: 0.7% user 3.5% system 7.8% wait 88.0% idle For non-commercial Logged on: 1 users 1 active 1 remote 00:10 sleep time use only !!! Real memory: 211.6M procs 812.0M files0.5M free 1024.0M total Virtual memory: 137.6M used 3574.4M free 3712.0M total ***EMAIL DISCLAIMER** This e-mail and any files transmitted with it may be confidential and are intended solely for the use of the
Re: AIX Gurus.. .Help Needed..
I installed ML08 on AIX 4.3.3 .0 today and issued command # oslevel 4.3.2.0 # instfix -ik 4330-08_AIX_ML All filesets for 4330-08_AIX_ML were found. # instfix -ciqk 4330-08_AIX_ML | grep ":-:" is this ok ---4.3.2.0 ? Shekhar Dhotre UniX /Tivoli Admin . Bayer Corp. 508-520-7821 . Shawn Raymond [EMAIL PROTECTED]@VM.MARIST.EDU on 04/10/2001 08:46:03 AM Please respond to "ADSM: Dist Stor Manager" [EMAIL PROTECTED] Sent by: "ADSM: Dist Stor Manager" [EMAIL PROTECTED] To: [EMAIL PROTECTED] cc: Subject: Re: AIX Gurus.. .Help Needed.. Update your perfagent.tools to 2.2.33.50. svmon was broken in the previous few releases. -- Shawn Raymond Sr. Technical Consultant Synergy, Inc. 518-782-3457 Shekhar DhotreTo: [EMAIL PROTECTED] shekhar.dhotre.b@cc: BAYER.COMSubject: Re: AIX Gurus.. .Help Needed.. Sent by: "ADSM: Dist Stor Manager" [EMAIL PROTECTED] EDU 04/09/01 04:53 PM Please respond to "ADSM: Dist Stor Manager" I am trying to execute svmon but , getting following error ..any idea ? medrs2:ps -aef | grep dsmserv root 42134 1 0 Apr 02 - 2474:14 dsmserv root 48518 47810 1 16:36:56 pts/10 0:00 grep dsmserv medrs2:sh /usr/bin/svmon -P 42134 sh: /usr/bin/svmon: 0403-006 Execute permission denied. medrs2:id uid=0(root) gid=0(system) groups=2(bin),3(sys),7(security),8(cron),10(audit) medrs2: medrs2:svmon open: No such file or directory medrs2:/usr/bin/svmon open: No such file or directory medrs2:cd /usr/bin medrs2:./svmon open: No such file or directory medrs2:sh svmon sh: svmon: 0403-006 Execute permission denied. medrs2:echo $PATH /usr/bin:/etc:/usr/sbin:/usr/ucb:/usr/bin/X11:/sbin Thanks shekhar .. George Lesho [EMAIL PROTECTED]@VM.MARIST.EDU on 04/09/2001 03:19:45 PM Please respond to "ADSM: Dist Stor Manager" [EMAIL PROTECTED] Sent by: "ADSM: Dist Stor Manager" [EMAIL PROTECTED] To: [EMAIL PROTECTED] cc: Subject: Re: AIX Gurus.. .Help Needed.. Herve, Where am going wrong here??? # ps -aef | grep dsmserv root 30300 34772 0 Apr 07 - 606:00 dsmserv quiet # svmon -P 30300 Pid Command Inuse Pin Pgspace 64-bit 30300*** process does not exist *** Drop me a note off line and help me out... I am not sure why it is coming back and saying that my TSM server is not running thanks- George Lesho Storage/System Admin AFC Enterprises "Chibois, Herve" [EMAIL PROTECTED] on 04/06/2001 10:23:05 AM Please respond to "ADSM: Dist Stor Manager" [EMAIL PROTECTED] To: [EMAIL PROTECTED] cc:(bcc: George Lesho/Partners/AFC) Fax to: Subject: Re: AIX Gurus.. .Help Needed.. Hi Richard, to know exactly how many RAM TSM is eating, try the following : % ps -eaf | grep dsmserv -- GET PID % svmon -P pid --- physical RAM pages (4Ko) ---+ v Pid CommandInusePin Pgspace 11638 dsmserv.4255741 1637293 | Pid: 11638+ 217 MB Command: dsmserv.42 Segid Type Description InusePin Pgspace Address Range 1ba6 pers /dev/hd3:93 0 00 0..0 7a1 pers /dev/hd3:88 0 00 0..0 ... Hope this helps rv -Message d'origine- De : Dearman, Richard [mailto:[EMAIL PROTECTED]] Envoy : vendredi 6 avril 2001 17:17 : [EMAIL PROTECTED] Objet : AIX Gurus.. .Help Needed.. I use the "top"utility to monitor my server adsm server load. I noticed that the Real memory statement is showing 812M files is being used. What does the files statement mean? it seems whatever files means is taking up all of my memory. Load averages: 0.10, 0.04, 0.04 adsmsrv1Fri Apr 6 10:15:50 2001 Cpu states: 0.7% user 3.5% system 7.8% wait 88.0% idle For non-commercial Logged on: 1 users 1 active 1 remote 00:10 sleep time use only !!! Real memory: 211.6M procs 812.0M files0.5M free 1024.0M total Virtual memory: 137.6M used 3574.4M free 3712.0M total ***EMAIL DISCLAIMER** This e-mail and any files transmitted with it may be confidential and are intended solely for the use of the individual or entity to whom they are addressed. If you are not the intended recipient or the individual responsible for delivering the e-mail to the intended recipient, any disclosur
Re: AIX Gurus.. .Help Needed..
Herve, Where am going wrong here??? # ps -aef | grep dsmserv root 30300 34772 0 Apr 07 - 606:00 dsmserv quiet # svmon -P 30300 Pid Command Inuse Pin Pgspace 64-bit 30300*** process does not exist *** Drop me a note off line and help me out... I am not sure why it is coming back and saying that my TSM server is not running thanks- George Lesho Storage/System Admin AFC Enterprises "Chibois, Herve" [EMAIL PROTECTED] on 04/06/2001 10:23:05 AM Please respond to "ADSM: Dist Stor Manager" [EMAIL PROTECTED] To: [EMAIL PROTECTED] cc:(bcc: George Lesho/Partners/AFC) Fax to: Subject: Re: AIX Gurus.. .Help Needed.. Hi Richard, to know exactly how many RAM TSM is eating, try the following : % ps -eaf | grep dsmserv -- GET PID % svmon -P pid --- physical RAM pages (4Ko) ---+ v Pid CommandInusePin Pgspace 11638 dsmserv.4255741 1637293 | Pid: 11638+ 217 MB Command: dsmserv.42 Segid Type Description InusePin Pgspace Address Range 1ba6 pers /dev/hd3:93 0 00 0..0 7a1 pers /dev/hd3:88 0 00 0..0 ... Hope this helps rv -Message d'origine- De : Dearman, Richard [mailto:[EMAIL PROTECTED]] Envoy : vendredi 6 avril 2001 17:17 : [EMAIL PROTECTED] Objet : AIX Gurus.. .Help Needed.. I use the "top"utility to monitor my server adsm server load. I noticed that the Real memory statement is showing 812M files is being used. What does the files statement mean? it seems whatever files means is taking up all of my memory. Load averages: 0.10, 0.04, 0.04 adsmsrv1Fri Apr 6 10:15:50 2001 Cpu states: 0.7% user 3.5% system 7.8% wait 88.0% idle For non-commercial Logged on: 1 users 1 active 1 remote 00:10 sleep time use only !!! Real memory: 211.6M procs 812.0M files0.5M free 1024.0M total Virtual memory: 137.6M used 3574.4M free 3712.0M total ***EMAIL DISCLAIMER** This e-mail and any files transmitted with it may be confidential and are intended solely for the use of the individual or entity to whom they are addressed. If you are not the intended recipient or the individual responsible for delivering the e-mail to the intended recipient, any disclosure, copying, distribution or any action taken or omitted to be taken in reliance on it, is strictly prohibited. If you have received this e-mail in error, please delete it and notify the sender or contact Health Information Management (312) 996-3941.
Re: AIX Gurus.. .Help Needed..
I am trying to execute svmon but , getting following error ..any idea ? medrs2:ps -aef | grep dsmserv root 42134 1 0 Apr 02 - 2474:14 dsmserv root 48518 47810 1 16:36:56 pts/10 0:00 grep dsmserv medrs2:sh /usr/bin/svmon -P 42134 sh: /usr/bin/svmon: 0403-006 Execute permission denied. medrs2:id uid=0(root) gid=0(system) groups=2(bin),3(sys),7(security),8(cron),10(audit) medrs2: medrs2:svmon open: No such file or directory medrs2:/usr/bin/svmon open: No such file or directory medrs2:cd /usr/bin medrs2:./svmon open: No such file or directory medrs2:sh svmon sh: svmon: 0403-006 Execute permission denied. medrs2:echo $PATH /usr/bin:/etc:/usr/sbin:/usr/ucb:/usr/bin/X11:/sbin Thanks shekhar .. George Lesho [EMAIL PROTECTED]@VM.MARIST.EDU on 04/09/2001 03:19:45 PM Please respond to "ADSM: Dist Stor Manager" [EMAIL PROTECTED] Sent by: "ADSM: Dist Stor Manager" [EMAIL PROTECTED] To: [EMAIL PROTECTED] cc: Subject: Re: AIX Gurus.. .Help Needed.. Herve, Where am going wrong here??? # ps -aef | grep dsmserv root 30300 34772 0 Apr 07 - 606:00 dsmserv quiet # svmon -P 30300 Pid Command Inuse Pin Pgspace 64-bit 30300*** process does not exist *** Drop me a note off line and help me out... I am not sure why it is coming back and saying that my TSM server is not running thanks- George Lesho Storage/System Admin AFC Enterprises "Chibois, Herve" [EMAIL PROTECTED] on 04/06/2001 10:23:05 AM Please respond to "ADSM: Dist Stor Manager" [EMAIL PROTECTED] To: [EMAIL PROTECTED] cc:(bcc: George Lesho/Partners/AFC) Fax to: Subject: Re: AIX Gurus.. .Help Needed.. Hi Richard, to know exactly how many RAM TSM is eating, try the following : % ps -eaf | grep dsmserv -- GET PID % svmon -P pid --- physical RAM pages (4Ko) ---+ v Pid CommandInusePin Pgspace 11638 dsmserv.4255741 1637293 | Pid: 11638+ 217 MB Command: dsmserv.42 Segid Type Description InusePin Pgspace Address Range 1ba6 pers /dev/hd3:93 0 00 0..0 7a1 pers /dev/hd3:88 0 00 0..0 ... Hope this helps rv -Message d'origine- De : Dearman, Richard [mailto:[EMAIL PROTECTED]] Envoy : vendredi 6 avril 2001 17:17 : [EMAIL PROTECTED] Objet : AIX Gurus.. .Help Needed.. I use the "top"utility to monitor my server adsm server load. I noticed that the Real memory statement is showing 812M files is being used. What does the files statement mean? it seems whatever files means is taking up all of my memory. Load averages: 0.10, 0.04, 0.04 adsmsrv1Fri Apr 6 10:15:50 2001 Cpu states: 0.7% user 3.5% system 7.8% wait 88.0% idle For non-commercial Logged on: 1 users 1 active 1 remote 00:10 sleep time use only !!! Real memory: 211.6M procs 812.0M files0.5M free 1024.0M total Virtual memory: 137.6M used 3574.4M free 3712.0M total ***EMAIL DISCLAIMER** This e-mail and any files transmitted with it may be confidential and are intended solely for the use of the individual or entity to whom they are addressed. If you are not the intended recipient or the individual responsible for delivering the e-mail to the intended recipient, any disclosure, copying, distribution or any action taken or omitted to be taken in reliance on it, is strictly prohibited. If you have received this e-mail in error, please delete it and notify the sender or contact Health Information Management (312) 996-3941. =?iso-8859-1?Q?$RFC822.eml?=
Re: AIX Gurus.. .Help Needed..
Hi Shekhar, Have you installed SAR and IOSTAT ? SAR like SVMON needs to write in a particular directory, which must exists before launching the command If yes, test if you can run them without any permission pb; root # sar 2 10 Haven't you reached your Ulimit ? I will check this tomorrow, keep on searching. rv - Original Message - From: "Shekhar Dhotre" [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Monday, April 09, 2001 10:53 PM Subject: Re: AIX Gurus.. .Help Needed.. I am trying to execute svmon but , getting following error ..any idea ? medrs2:ps -aef | grep dsmserv root 42134 1 0 Apr 02 - 2474:14 dsmserv root 48518 47810 1 16:36:56 pts/10 0:00 grep dsmserv medrs2:sh /usr/bin/svmon -P 42134 sh: /usr/bin/svmon: 0403-006 Execute permission denied. medrs2:id uid=0(root) gid=0(system) groups=2(bin),3(sys),7(security),8(cron),10(audit) medrs2: medrs2:svmon open: No such file or directory medrs2:/usr/bin/svmon open: No such file or directory medrs2:cd /usr/bin medrs2:./svmon open: No such file or directory medrs2:sh svmon sh: svmon: 0403-006 Execute permission denied. medrs2:echo $PATH /usr/bin:/etc:/usr/sbin:/usr/ucb:/usr/bin/X11:/sbin Thanks shekhar .. George Lesho [EMAIL PROTECTED]@VM.MARIST.EDU on 04/09/2001 03:19:45 PM Please respond to "ADSM: Dist Stor Manager" [EMAIL PROTECTED] Sent by: "ADSM: Dist Stor Manager" [EMAIL PROTECTED] To: [EMAIL PROTECTED] cc: Subject: Re: AIX Gurus.. .Help Needed.. Herve, Where am going wrong here??? # ps -aef | grep dsmserv root 30300 34772 0 Apr 07 - 606:00 dsmserv quiet # svmon -P 30300 Pid Command Inuse Pin Pgspace 64-bit 30300*** process does not exist *** Drop me a note off line and help me out... I am not sure why it is coming back and saying that my TSM server is not running thanks- George Lesho Storage/System Admin AFC Enterprises "Chibois, Herve" [EMAIL PROTECTED] on 04/06/2001 10:23:05 AM Please respond to "ADSM: Dist Stor Manager" [EMAIL PROTECTED] To: [EMAIL PROTECTED] cc:(bcc: George Lesho/Partners/AFC) Fax to: Subject: Re: AIX Gurus.. .Help Needed.. Hi Richard, to know exactly how many RAM TSM is eating, try the following : % ps -eaf | grep dsmserv -- GET PID % svmon -P pid --- physical RAM pages (4Ko) ---+ v Pid CommandInusePin Pgspace 11638 dsmserv.4255741 1637293 | Pid: 11638+ 217 MB Command: dsmserv.42 Segid Type Description InusePin Pgspace Address Range 1ba6 pers /dev/hd3:93 0 00 0..0 7a1 pers /dev/hd3:88 0 00 0..0 ... Hope this helps rv -Message d'origine- De : Dearman, Richard [mailto:[EMAIL PROTECTED]] Envoy : vendredi 6 avril 2001 17:17 : [EMAIL PROTECTED] Objet : AIX Gurus.. .Help Needed.. I use the "top"utility to monitor my server adsm server load. I noticed that the Real memory statement is showing 812M files is being used. What does the files statement mean? it seems whatever files means is taking up all of my memory. Load averages: 0.10, 0.04, 0.04 adsmsrv1Fri Apr 6 10:15:50 2001 Cpu states: 0.7% user 3.5% system 7.8% wait 88.0% idle For non-commercial Logged on: 1 users 1 active 1 remote 00:10 sleep time use only !!! Real memory: 211.6M procs 812.0M files0.5M free 1024.0M total Virtual memory: 137.6M used 3574.4M free 3712.0M total ***EMAIL DISCLAIMER** This e-mail and any files transmitted with it may be confidential and are intended solely for the use of the individual or entity to whom they are addressed. If you are not the intended recipient or the individual responsible for delivering the e-mail to the intended recipient, any disclosure, copying, distribution or any action taken or omitted to be taken in reliance on it, is strictly prohibited. If you have received this e-mail in error, please delete it and notify the sender or contact Health Information Management (312) 996-3941.
AIX Gurus.. .Help Needed..
I use the "top"utility to monitor my server adsm server load. I noticed that the Real memory statement is showing 812M files is being used. What does the files statement mean? it seems whatever files means is taking up all of my memory. Load averages: 0.10, 0.04, 0.04 adsmsrv1Fri Apr 6 10:15:50 2001 Cpu states: 0.7% user 3.5% system 7.8% wait 88.0% idle For non-commercial Logged on: 1 users 1 active 1 remote 00:10 sleep time use only !!! Real memory: 211.6M procs 812.0M files0.5M free 1024.0M total Virtual memory: 137.6M used 3574.4M free 3712.0M total ***EMAIL DISCLAIMER** This e-mail and any files transmitted with it may be confidential and are intended solely for the use of the individual or entity to whom they are addressed. If you are not the intended recipient or the individual responsible for delivering the e-mail to the intended recipient, any disclosure, copying, distribution or any action taken or omitted to be taken in reliance on it, is strictly prohibited. If you have received this e-mail in error, please delete it and notify the sender or contact Health Information Management (312) 996-3941.