Re: ANR8314E Library is Full Error
Mel, In case it needs to run an AUDIT LIBRARY, would it be with CHELKLABEL=YES or CHECKLABEL=BARCODE? Because, CHECKLABEL=YES may take hours to complete the audit as it mounts and checks the label of each volume... -Rama -Original Message- From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED] On Behalf Of Dennis, Melburn (IT Solutions US) Sent: Thursday, December 06, 2007 4:04 PM To: ADSM-L@VM.MARIST.EDU Subject: Re: [ADSM-L] ANR8314E Library is Full Error Actually if all that was added was extra slots in the second frame, all that needs to be run is an audit library command. This will force your library to reaudit your current inventory including the new empty slots. If new drives were added as well, just define the new paths and drives to the existing library. No need to delete paths/drives/library for this. I've done it several times when we've upgraded our scalar 10k with new cabinets. Mel Dennis Backup Systems Engineer Siemens IT Solutions and Services, Inc. PGST Data Center Operations 4400 Alafaya Trail MC Q1-108 Orlando, FL 32826 Tel.: 407-736-2360 Mob: 321-356-9366 Fax: 407-243-0260 mailto:[EMAIL PROTECTED] www.usa.siemens.com/it-solutions -Original Message- From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED] On Behalf Of Stapleton, Mark Sent: Thursday, December 06, 2007 2:44 PM To: ADSM-L@VM.MARIST.EDU Subject: Re: [ADSM-L] ANR8314E Library is Full Error From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED] On Behalf Of Maura Adams Thanks for the info. I just heard back from IBM support and because our second frame to the library was added after our original install, TSM does not see it. We need to take an outage and delete/define all paths, library, drives and check all tapes back in. A little bit ugly. Not ugly at all, and no outage is required if you do this at night, since tape drives are usually quiet during that time anyway. Write a batch file that does the following: delete path (all tape drives) delete path (for library) delete drive (all tape drives) delete library (library) define library define path (for library) define drive (all tape drives) define path (all tape drives) checkin libv (library) search=yes status=scratch checkl=barcode checkin libv (library) search=yes status=private checkl=barcode Call the batch file library_redo. Run the file as a macro. This should all run within a minute or two. Do it while all tape drives are quiet. -- Mark Stapleton Berbee (a CDW company) System engineer 7145 Boone Avenue North, Suite 140 Brooklyn Park MN 55428-1511 763-592-5963 www.berbee.com This message w/attachments (message) may be privileged, confidential or proprietary, and if you are not an intended recipient, please notify the sender, do not use or share it and delete it. Unless specifically indicated, this message is not an offer to sell or a solicitation of any investment products or other financial product or service, an official confirmation of any transaction, or an official statement of Merrill Lynch. Subject to applicable law, Merrill Lynch may monitor, review and retain e-communications (EC) traveling through its networks/systems. The laws of the country of each sender/recipient may impact the handling of EC, and EC may be archived, supervised and produced in countries other than the country in which you are located. This message cannot be guaranteed to be secure or error-free. This message is subject to terms available at the following link: http://www.ml.com/e-communications_terms/. By messaging with Merrill Lynch you consent to the foregoing.
Re: ANR8314E Library is Full Error
From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED] On Behalf Of Maura Adams Thanks for the info. I just heard back from IBM support and because our second frame to the library was added after our original install, TSM does not see it. We need to take an outage and delete/define all paths, library, drives and check all tapes back in. A little bit ugly. Not ugly at all, and no outage is required if you do this at night, since tape drives are usually quiet during that time anyway. Write a batch file that does the following: delete path (all tape drives) delete path (for library) delete drive (all tape drives) delete library (library) define library define path (for library) define drive (all tape drives) define path (all tape drives) checkin libv (library) search=yes status=scratch checkl=barcode checkin libv (library) search=yes status=private checkl=barcode Call the batch file library_redo. Run the file as a macro. This should all run within a minute or two. Do it while all tape drives are quiet. -- Mark Stapleton Berbee (a CDW company) System engineer 7145 Boone Avenue North, Suite 140 Brooklyn Park MN 55428-1511 763-592-5963 www.berbee.com
Re: ANR8314E Library is Full Error
Actually if all that was added was extra slots in the second frame, all that needs to be run is an audit library command. This will force your library to reaudit your current inventory including the new empty slots. If new drives were added as well, just define the new paths and drives to the existing library. No need to delete paths/drives/library for this. I've done it several times when we've upgraded our scalar 10k with new cabinets. Mel Dennis Backup Systems Engineer Siemens IT Solutions and Services, Inc. PGST Data Center Operations 4400 Alafaya Trail MC Q1-108 Orlando, FL 32826 Tel.: 407-736-2360 Mob: 321-356-9366 Fax: 407-243-0260 mailto:[EMAIL PROTECTED] www.usa.siemens.com/it-solutions -Original Message- From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED] On Behalf Of Stapleton, Mark Sent: Thursday, December 06, 2007 2:44 PM To: ADSM-L@VM.MARIST.EDU Subject: Re: [ADSM-L] ANR8314E Library is Full Error From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED] On Behalf Of Maura Adams Thanks for the info. I just heard back from IBM support and because our second frame to the library was added after our original install, TSM does not see it. We need to take an outage and delete/define all paths, library, drives and check all tapes back in. A little bit ugly. Not ugly at all, and no outage is required if you do this at night, since tape drives are usually quiet during that time anyway. Write a batch file that does the following: delete path (all tape drives) delete path (for library) delete drive (all tape drives) delete library (library) define library define path (for library) define drive (all tape drives) define path (all tape drives) checkin libv (library) search=yes status=scratch checkl=barcode checkin libv (library) search=yes status=private checkl=barcode Call the batch file library_redo. Run the file as a macro. This should all run within a minute or two. Do it while all tape drives are quiet. -- Mark Stapleton Berbee (a CDW company) System engineer 7145 Boone Avenue North, Suite 140 Brooklyn Park MN 55428-1511 763-592-5963 www.berbee.com
Re: ANR8314E Library is Full Error
Thanks for the info. I just heard back from IBM support and because our second frame to the library was added after our original install, TSM does not see it. We need to take an outage and delete/define all paths, library, drives and check all tapes back in. A little bit ugly. Drats! Zoltan Forray/AC/VCU wrote: Sounds like time to do an audit of the library. We have these kinds of issue with our wonderful 3583 libraries and it is usually due to the TSM info/audit being out of sync with libraries info. We do audits all the time, especially after we have to power-recycle the libraries, which is at least once a week. Maura Adams [EMAIL PROTECTED] Sent by: ADSM: Dist Stor Manager ADSM-L@VM.MARIST.EDU 12/05/2007 09:49 AM Please respond to ADSM: Dist Stor Manager ADSM-L@VM.MARIST.EDU To ADSM-L@VM.MARIST.EDU cc Subject [ADSM-L] ANR8314E Library is Full Error I've never sent to the listserv before, so we'll so how this goes. In short we have a IBM 3584 library. Through the specialist interface, I can see that we have 399 slots available in the tape library. However, when running the checkin command on our weekly offsite tape returns, I receive the following. 23:49:57 ANR8314E Library 7OF9 is full. ANR0985I Process 4785 for CHECKIN LIBVOLUME running in the BACKGROUND completed with completion state FAILURE at 23:49:57 I have opened a PMR, but am wondering if anyone else has a seen this problem. Maura
Re: ANR8314E Library is Full Error
Hi, One of the problems we have had in the past with a 3584 hogging slots not known to TSM is if the VIRTUAL IO is enabled. Check this from the web based library login under LIBRARY VIRTUAL IO . The other problem you will have after that is identifying the volumes in the library not assigned to TSM. This you can get from CARTRIDGES DATA CATRIDGES. then select (unnassigned/shared) from the drop down 'select a logical library' option. that is if you have the same web based GUI we have. Out of interest what number do you get back from TSM if you run this SQL. select count(*) as Vols in Lib from libvolumes and also try q vol access=unavailable f=d If that one brings anything back then you definately need to audit your library. Cheers Jim (Breaking TSM happily) - Original Message - From: Zoltan Forray/AC/VCU [EMAIL PROTECTED] To: ADSM-L@VM.MARIST.EDU Sent: Wednesday, December 05, 2007 2:54 PM Subject: Re: [ADSM-L] ANR8314E Library is Full Error Sounds like time to do an audit of the library. We have these kinds of issue with our wonderful 3583 libraries and it is usually due to the TSM info/audit being out of sync with libraries info. We do audits all the time, especially after we have to power-recycle the libraries, which is at least once a week. Maura Adams [EMAIL PROTECTED] Sent by: ADSM: Dist Stor Manager ADSM-L@VM.MARIST.EDU 12/05/2007 09:49 AM Please respond to ADSM: Dist Stor Manager ADSM-L@VM.MARIST.EDU To ADSM-L@VM.MARIST.EDU cc Subject [ADSM-L] ANR8314E Library is Full Error I've never sent to the listserv before, so we'll so how this goes. In short we have a IBM 3584 library. Through the specialist interface, I can see that we have 399 slots available in the tape library. However, when running the checkin command on our weekly offsite tape returns, I receive the following. 23:49:57 ANR8314E Library 7OF9 is full. ANR0985I Process 4785 for CHECKIN LIBVOLUME running in the BACKGROUND completed with completion state FAILURE at 23:49:57 I have opened a PMR, but am wondering if anyone else has a seen this problem. Maura This message has been scanned for viruses by Cattles and Sophos Pure Message scanning services. Cattles plc Registered in England No: 543610 Kingston House, Centre 27 Business Park, Woodhead Road, Birstall, Batley, WF179TD. The views and opinions expressed herein are those of the author and not of Cattles plc or any of its subsidiaries.The content of this e-mail is confidential, may contain privileged material and is intended solely for the recipient(s) named above. If you receive this in error, please notify the sender immediately and delete this e-mail. Please note that neither Cattles plc nor the sender accepts any responsibility for viruses and it is your responsibility to scan the email and attachments(if any). No contracts or agreements may be concluded on behalf of Cattles plc or its subsidiaries by means of email communications. This message has been scanned for Viruses by Cattles and Sophos Puremessage scanning service.
Re: ANR8314E Library is Full Error
Sounds like time to do an audit of the library. We have these kinds of issue with our wonderful 3583 libraries and it is usually due to the TSM info/audit being out of sync with libraries info. We do audits all the time, especially after we have to power-recycle the libraries, which is at least once a week. Maura Adams [EMAIL PROTECTED] Sent by: ADSM: Dist Stor Manager ADSM-L@VM.MARIST.EDU 12/05/2007 09:49 AM Please respond to ADSM: Dist Stor Manager ADSM-L@VM.MARIST.EDU To ADSM-L@VM.MARIST.EDU cc Subject [ADSM-L] ANR8314E Library is Full Error I've never sent to the listserv before, so we'll so how this goes. In short we have a IBM 3584 library. Through the specialist interface, I can see that we have 399 slots available in the tape library. However, when running the checkin command on our weekly offsite tape returns, I receive the following. 23:49:57 ANR8314E Library 7OF9 is full. ANR0985I Process 4785 for CHECKIN LIBVOLUME running in the BACKGROUND completed with completion state FAILURE at 23:49:57 I have opened a PMR, but am wondering if anyone else has a seen this problem. Maura
Re: ANR8314E Library is Full Error
That is ugly. We didn't have to do that when we expanded our 3494. Yes, we had to redefine devices/paths, but that was because of the SAN and the way it found the devices and obviously the change in device types, but not the library size/slot count. Glad to hear you resolved it. Maura Adams [EMAIL PROTECTED] Sent by: ADSM: Dist Stor Manager ADSM-L@VM.MARIST.EDU 12/05/2007 10:07 AM Please respond to ADSM: Dist Stor Manager ADSM-L@VM.MARIST.EDU To ADSM-L@VM.MARIST.EDU cc Subject Re: [ADSM-L] ANR8314E Library is Full Error Thanks for the info. I just heard back from IBM support and because our second frame to the library was added after our original install, TSM does not see it. We need to take an outage and delete/define all paths, library, drives and check all tapes back in. A little bit ugly. Drats! Zoltan Forray/AC/VCU wrote: Sounds like time to do an audit of the library. We have these kinds of issue with our wonderful 3583 libraries and it is usually due to the TSM info/audit being out of sync with libraries info. We do audits all the time, especially after we have to power-recycle the libraries, which is at least once a week. Maura Adams [EMAIL PROTECTED] Sent by: ADSM: Dist Stor Manager ADSM-L@VM.MARIST.EDU 12/05/2007 09:49 AM Please respond to ADSM: Dist Stor Manager ADSM-L@VM.MARIST.EDU To ADSM-L@VM.MARIST.EDU cc Subject [ADSM-L] ANR8314E Library is Full Error I've never sent to the listserv before, so we'll so how this goes. In short we have a IBM 3584 library. Through the specialist interface, I can see that we have 399 slots available in the tape library. However, when running the checkin command on our weekly offsite tape returns, I receive the following. 23:49:57 ANR8314E Library 7OF9 is full. ANR0985I Process 4785 for CHECKIN LIBVOLUME running in the BACKGROUND completed with completion state FAILURE at 23:49:57 I have opened a PMR, but am wondering if anyone else has a seen this problem. Maura
ANR8314E Library is Full Error
I've never sent to the listserv before, so we'll so how this goes. In short we have a IBM 3584 library. Through the specialist interface, I can see that we have 399 slots available in the tape library. However, when running the checkin command on our weekly offsite tape returns, I receive the following. 23:49:57 ANR8314E Library 7OF9 is full. ANR0985I Process 4785 for CHECKIN LIBVOLUME running in the BACKGROUND completed with completion state FAILURE at 23:49:57 I have opened a PMR, but am wondering if anyone else has a seen this problem. Maura
Re: ANR8314E Library is Full Error
A little late to help you out now, but there are instructions out there for expanding your library. http://www-1.ibm.com/support/docview.wss?rs=663uid=swg21203271 __ John Monahan Consultant Logicalis, Inc. 5500 Wayzata Blvd Suite 315 Golden Valley, MN 55416 Office: 763-417-0552 x109 Mobile: 952-221-6938 Fax: 763-417-0554 [EMAIL PROTECTED] http://www.us.logicalis.com Maura Adams [EMAIL PROTECTED] Sent by: ADSM: Dist Stor Manager ADSM-L@VM.MARIST.EDU 12/05/2007 09:04 AM Please respond to ADSM: Dist Stor Manager ADSM-L@VM.MARIST.EDU To ADSM-L@VM.MARIST.EDU cc Subject Re: ANR8314E Library is Full Error Thanks for the info. I just heard back from IBM support and because our second frame to the library was added after our original install, TSM does not see it. We need to take an outage and delete/define all paths, library, drives and check all tapes back in. A little bit ugly. Drats! Zoltan Forray/AC/VCU wrote: Sounds like time to do an audit of the library. We have these kinds of issue with our wonderful 3583 libraries and it is usually due to the TSM info/audit being out of sync with libraries info. We do audits all the time, especially after we have to power-recycle the libraries, which is at least once a week. Maura Adams [EMAIL PROTECTED] Sent by: ADSM: Dist Stor Manager ADSM-L@VM.MARIST.EDU 12/05/2007 09:49 AM Please respond to ADSM: Dist Stor Manager ADSM-L@VM.MARIST.EDU To ADSM-L@VM.MARIST.EDU cc Subject [ADSM-L] ANR8314E Library is Full Error I've never sent to the listserv before, so we'll so how this goes. In short we have a IBM 3584 library. Through the specialist interface, I can see that we have 399 slots available in the tape library. However, when running the checkin command on our weekly offsite tape returns, I receive the following. 23:49:57 ANR8314E Library 7OF9 is full. ANR0985I Process 4785 for CHECKIN LIBVOLUME running in the BACKGROUND completed with completion state FAILURE at 23:49:57 I have opened a PMR, but am wondering if anyone else has a seen this problem. Maura This email may contain confidential information. If you received it in error, please delete it and notify the sender.
Re: Dell 130T library is full
Hi, Sounds like this library is a badged quantum ATL P1000. We have 4 of those here and have had similar problems. This library doesn't allocate a slot for cleaning tapes. The only way round this problem is to checkout all volumes the TSM Server knows about. Remove the volumes that are in the library, including the cleaning tape. Run an audit library, and then place all the volumes removed back in the library. This should fix the problem, (at least it did here). We logged a fault with Tivoli, and all they suggested was to run an audit library. Before you do the above, check your devcnfg.out file and make sure this matches what is in the library. Cheers Stuart The information contained in this email is intended only for the use of the intended recipient at the email address to which it has been addressed. If the reader of this message is not an intended recipient, you are hereby notified that you have received this document in error and that any review, dissemination or copying of the message or associated attachments is strictly prohibited. If you have received this email in error, please contact the sender by return email or call 01793 87 and ask for the sender and then delete it immediately from your system. Please note that neither Innogy nor the sender accepts any responsibility for viruses and it is your responsibility to scan attachments (if any). *
Dell 130T library is full
We use a Dell 130T library with 2 DLT7000 drives and 30 slots. TSM only appears to see 29 of the 30 slots. When we try to checkin another tape, we get an error stating that the library is full. We can only see 29 tapes when we have autoclean disables on the library. With it enabled, we can only see 28 slots. Slot 7 is used for a cleaning tape. Has anyone else encountered this type of problem? Any suggestions will be greatly appreciated. Thanks, Chris
Re: Dell 130T library is full
From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED]]On Behalf Of TSM Admin We use a Dell 130T library with 2 DLT7000 drives and 30 slots. TSM only appears to see 29 of the 30 slots. When we try to checkin another tape, we get an error stating that the library is full. We can only see 29 tapes when we have autoclean disables on the library. With it enabled, we can only see 28 slots. Slot 7 is used for a cleaning tape. Has anyone else encountered this type of problem? Any suggestions will be greatly appreciated. A warm beer says that the empty slot is one reserved for a cleaner tape. Check your hardware manual to see if there's a way to load a cleaner cartridge through the front panel's I/O station. If there is, and you remove the cleaner from its present slot and load it by using the library itself, it'll go in that 30th slot. -- Mark Stapleton ([EMAIL PROTECTED]) Certified TSM consultant Certified AIX system engineer MSCE
Re: Dell 130T library is full
Things always go better after a few beers :) (As it turns out I don't really have an answer for you) BUT.. I recall, the IBM 3494 has reserved slots for lost misplaced tapes - the homeless... This slot needs to be kept spare. Plus one for cleaning tapes, Customer Engineer Tapes etc .. It never worried me much as the 3494 we had, had 2700 + slots... but on a smaller Library I can see your getting anxious. Could the above apply to the DELL maybe? Regards -Original Message- From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED]]On Behalf Of Mark Stapleton Sent: Thursday, 13 June 2002 8:00 AM To: [EMAIL PROTECTED] Subject: Re: Dell 130T library is full From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED]]On Behalf Of TSM Admin We use a Dell 130T library with 2 DLT7000 drives and 30 slots. TSM only appears to see 29 of the 30 slots. When we try to checkin another tape, we get an error stating that the library is full. We can only see 29 tapes when we have autoclean disables on the library. With it enabled, we can only see 28 slots. Slot 7 is used for a cleaning tape. Has anyone else encountered this type of problem? Any suggestions will be greatly appreciated. A warm beer says that the empty slot is one reserved for a cleaner tape. Check your hardware manual to see if there's a way to load a cleaner cartridge through the front panel's I/O station. If there is, and you remove the cleaner from its present slot and load it by using the library itself, it'll go in that 30th slot. -- Mark Stapleton ([EMAIL PROTECTED]) Certified TSM consultant Certified AIX system engineer MSCE
Library is FULL?
Hello all fellow TSM'rs I'm trying as I may to change a vol in a tape library. I succesfully CHECKOUT a empty scratch volume and then try to CHECKIN a previous vol for a restore I'm trying to do. When I check tha ACTLOG it tells me the library is full. I've tried running an AUDIT and it shows only 9 or a possible 10 volumes. I can't seems to get past this. What am I doing wrong? I even tried another CHECKOUT using the SWAP option and again it successfully removes a volume but still thinks the library is full TIA Patrick
Re: Library is FULL?
Have you tried looking at the devconfig.out file to see if it shows the tapes being removed. I have had a problem where it had empty slots but it would not take a tape. Some of the tapes ended up showing in two different slots. Once I made all the changes things worked like it should have. -Original Message- From: Patrick Sheehan [mailto:[EMAIL PROTECTED]] Sent: Friday, July 20, 2001 1:22 PM To: [EMAIL PROTECTED] Subject: Library is FULL? Hello all fellow TSM'rs I'm trying as I may to change a vol in a tape library. I succesfully CHECKOUT a empty scratch volume and then try to CHECKIN a previous vol for a restore I'm trying to do. When I check tha ACTLOG it tells me the library is full. I've tried running an AUDIT and it shows only 9 or a possible 10 volumes. I can't seems to get past this. What am I doing wrong? I even tried another CHECKOUT using the SWAP option and again it successfully removes a volume but still thinks the library is full TIA Patrick
Re: Library is FULL?
Are you using the search parameter? Try checking the new volume in with the volser instead of using the search parameter. Jack Palmadesso -Original Message- From: Bill Wheeler [mailto:[EMAIL PROTECTED]] Sent: Friday, July 20, 2001 1:27 PM To: [EMAIL PROTECTED] Subject: Re: Library is FULL? Have you tried looking at the devconfig.out file to see if it shows the tapes being removed. I have had a problem where it had empty slots but it would not take a tape. Some of the tapes ended up showing in two different slots. Once I made all the changes things worked like it should have. -Original Message- From: Patrick Sheehan [mailto:[EMAIL PROTECTED]] Sent: Friday, July 20, 2001 1:22 PM To: [EMAIL PROTECTED] Subject: Library is FULL? Hello all fellow TSM'rs I'm trying as I may to change a vol in a tape library. I succesfully CHECKOUT a empty scratch volume and then try to CHECKIN a previous vol for a restore I'm trying to do. When I check tha ACTLOG it tells me the library is full. I've tried running an AUDIT and it shows only 9 or a possible 10 volumes. I can't seems to get past this. What am I doing wrong? I even tried another CHECKOUT using the SWAP option and again it successfully removes a volume but still thinks the library is full TIA Patrick
