Re: Need help with ADSM3.1 and WIN NT 4.0 SCSI
Better even de-install the ntt tape driver or disable the tape device in 4mm dat in the section device of the control panel This willfor comee any conflict.. Regards Marco sjerps Universal International Music -Original Message- From: Hunny Kershaw [mailto:[EMAIL PROTECTED]] Sent: vrijdag 12 juli 2002 9:11 To: [EMAIL PROTECTED] Subject: Re: Need help with ADSM3.1 and WIN NT 4.0 SCSI Andy is correct. If you would like to use adsmscsi to claim the tape drive, you will have to stop the NT driver that claims your tape drive. Since the drive has been claimed by the Window driver and adsmscsi does not find other device it can claim, adsmscsi will not start and you will get the message The system cannot find the device specified.. You saw the device name \\.\tape0, that is a good indication that the drive has been claimed by the NT driver. Regards Hunny Kershaw Internet Address: [EMAIL PROTECTED] Tivoli Storage Manager - Device Driver Development Tel (408) 256-2828, T/L 276-2828 Quality Policy = Commit to Quality, Customer Satisfaction, Continual Improvement Andrew Raibeck/Tucson/IBTo: [EMAIL PROTECTED] M@IBMUS cc: Sent by: ADSM: Subject: Re: Need help with ADSM3.1 and WIN NT 4.0 SCSI Dist Stor Manager [EMAIL PROTECTED] .EDU 07/11/2002 04:12 PM Please respond to ADSM: Dist Stor Manager Did you try shutting down the Windows driver before starting the ADSMSCSI driver? Regards, Andy Andy Raibeck IBM Software Group Tivoli Storage Manager Client Development Internal Notes e-mail: Andrew Raibeck/Tucson/IBM@IBMUS Internet e-mail: [EMAIL PROTECTED] (change eye to i to reply) The only dumb question is the one that goes unasked. The command line is your friend. Good enough is the enemy of excellence. O. Oexmann [EMAIL PROTECTED] Sent by: ADSM: Dist Stor Manager [EMAIL PROTECTED] 07/11/2002 15:03 Please respond to ADSM: Dist Stor Manager To: [EMAIL PROTECTED] cc: Subject:Need help with ADSM3.1 and WIN NT 4.0 SCSI Hello, i have to reactivate an old 3.1 installation which used a tape library with 6 cartridges. We do not have the old tape library anymore so i am currently trying to get an ordenary HP 1537A 4mm DAT to work. The Windows driver works fine and i can use the Windows backup program to backup and restore data to the tape but the ADSM SCSI just does not want to start. Is does not find the specific drive.. It is configured under Windows and the ADSM Wizard does find it, but the ADSM SCSI does not start. In the devconfig.out it says GENLIB1 and GENERIC_TAPE and \\.\tape0 Any suggestions or help is higly appreciated Kind regards O. Oexmann
Re: Need help with ADSM3.1 and WIN NT 4.0 SCSI
Andy is correct. If you would like to use adsmscsi to claim the tape drive, you will have to stop the NT driver that claims your tape drive. Since the drive has been claimed by the Window driver and adsmscsi does not find other device it can claim, adsmscsi will not start and you will get the message The system cannot find the device specified.. You saw the device name \\.\tape0, that is a good indication that the drive has been claimed by the NT driver. Regards Hunny Kershaw Internet Address: [EMAIL PROTECTED] Tivoli Storage Manager - Device Driver Development Tel (408) 256-2828, T/L 276-2828 Quality Policy = Commit to Quality, Customer Satisfaction, Continual Improvement Andrew Raibeck/Tucson/IBTo: [EMAIL PROTECTED] M@IBMUS cc: Sent by: ADSM: Subject: Re: Need help with ADSM3.1 and WIN NT 4.0 SCSI Dist Stor Manager [EMAIL PROTECTED] .EDU 07/11/2002 04:12 PM Please respond to ADSM: Dist Stor Manager Did you try shutting down the Windows driver before starting the ADSMSCSI driver? Regards, Andy Andy Raibeck IBM Software Group Tivoli Storage Manager Client Development Internal Notes e-mail: Andrew Raibeck/Tucson/IBM@IBMUS Internet e-mail: [EMAIL PROTECTED] (change eye to i to reply) The only dumb question is the one that goes unasked. The command line is your friend. Good enough is the enemy of excellence. O. Oexmann [EMAIL PROTECTED] Sent by: ADSM: Dist Stor Manager [EMAIL PROTECTED] 07/11/2002 15:03 Please respond to ADSM: Dist Stor Manager To: [EMAIL PROTECTED] cc: Subject:Need help with ADSM3.1 and WIN NT 4.0 SCSI Hello, i have to reactivate an old 3.1 installation which used a tape library with 6 cartridges. We do not have the old tape library anymore so i am currently trying to get an ordenary HP 1537A 4mm DAT to work. The Windows driver works fine and i can use the Windows backup program to backup and restore data to the tape but the ADSM SCSI just does not want to start. Is does not find the specific drive.. It is configured under Windows and the ADSM Wizard does find it, but the ADSM SCSI does not start. In the devconfig.out it says GENLIB1 and GENERIC_TAPE and \\.\tape0 Any suggestions or help is higly appreciated Kind regards O. Oexmann
Need help with ADSM3.1 and WIN NT 4.0 SCSI
Hello, i have to reactivate an old 3.1 installation which used a tape library with 6 cartridges. We do not have the old tape library anymore so i am currently trying to get an ordenary HP 1537A 4mm DAT to work. The Windows driver works fine and i can use the Windows backup program to backup and restore data to the tape but the ADSM SCSI just does not want to start. Is does not find the specific drive.. It is configured under Windows and the ADSM Wizard does find it, but the ADSM SCSI does not start. In the devconfig.out it says GENLIB1 and GENERIC_TAPE and \\.\tape0 Any suggestions or help is higly appreciated Kind regards O. Oexmann
Re: Need help with ADSM3.1 and WIN NT 4.0 SCSI
Did you try shutting down the Windows driver before starting the ADSMSCSI driver? Regards, Andy Andy Raibeck IBM Software Group Tivoli Storage Manager Client Development Internal Notes e-mail: Andrew Raibeck/Tucson/IBM@IBMUS Internet e-mail: [EMAIL PROTECTED] (change eye to i to reply) The only dumb question is the one that goes unasked. The command line is your friend. Good enough is the enemy of excellence. O. Oexmann [EMAIL PROTECTED] Sent by: ADSM: Dist Stor Manager [EMAIL PROTECTED] 07/11/2002 15:03 Please respond to ADSM: Dist Stor Manager To: [EMAIL PROTECTED] cc: Subject:Need help with ADSM3.1 and WIN NT 4.0 SCSI Hello, i have to reactivate an old 3.1 installation which used a tape library with 6 cartridges. We do not have the old tape library anymore so i am currently trying to get an ordenary HP 1537A 4mm DAT to work. The Windows driver works fine and i can use the Windows backup program to backup and restore data to the tape but the ADSM SCSI just does not want to start. Is does not find the specific drive.. It is configured under Windows and the ADSM Wizard does find it, but the ADSM SCSI does not start. In the devconfig.out it says GENLIB1 and GENERIC_TAPE and \\.\tape0 Any suggestions or help is higly appreciated Kind regards O. Oexmann
