Re: Netware Client Password failure
Hi Stormy, I had the same problem with my NetWare 5.1 servers with just the same error. I solve the problem by backing off to 4.1.3 version of client and implementing Novell NetWare TSA nlms tsa5up7, witch is available for download at http://support.novell.com/servlet/filedownload/ftf/tsa5up7.exe. Now my servers are backing up normally every night. Wish you success Cyril - Original Message - From: "Stormy Maddux" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Monday, November 26, 2001 9:30 PM Subject: Netware Client Password failure I have three TSM 4.2.1 Netware 5.0 clients that won't perform a scheduled backup. Normally when you first setup the client and register the node, the first time it prompts you to enter the Netware ID & password for the backup and stores the files. These three won't store the password. Every time you run a manual incremental or a scheduled backup, you get prompted. The error shows as: 11/21/2001 19:36:57 ANS1880E TSA Connect error, NWSMConnectToTargetService 'CTRL3' password file 'CTRL3\SYS:TIVOLI/TSM/CLIENT/BA/TSM.PWD'. Userid = 'adsm_support' failed with cc = FFFDFFD7 When you try a manual backup, the dsmerror.log writes the same thing, and on the screen you are prompted for the id & pw again. The TSM.PWD file gets updated with the same date and time. The DSM.opt file is set for passwordaccess generate and nwpwfile is set to yes. Any ideas?? Thanks, Stormy Maddux Systems Engineer 650-599-1187
Re: Netware Client Password failure
Hello Jim, If you have any weird punctuation in your pw ... try change the pw to exclude any punctuation ... had a problem here where removing a '.' in the pw fixed our problem. Good luck, Peter Jim Kirkman <[EMAIL PROTECTED]To: [EMAIL PROTECTED] C.EDU> cc: Sent by: Subject: Re: Netware Client Password failure "ADSM: Dist Stor Manager" <[EMAIL PROTECTED] RIST.EDU> 11/26/2001 02:03 PM Please respond to jim_kirkman Stormy, Have you tried deleting the existing .pwd files in the BA directory then running a manual and re-entering the info? If so, then I would recommend backing off to a 4.1 rev of the client. Also, as with any Netware problem, make sure you have the latest TSA nlms, tsa5up7 last time I checked. Are you getting prompted for the Novell username and pwd, or the TSM one? I'm having a problem on our Netware cluster nodes that's similar, scheduled backups run for a couple of nights and then fail because of a prompt for the TSM userid and pwd. This seems to be a problem since I upgraded our server from 3.1.x to 4.1.4. Very frustrating. Stormy Maddux wrote: > I have three TSM 4.2.1 Netware 5.0 clients that won't perform a scheduled backup. > > Normally when you first setup the client and register the node, the first time it prompts you to enter the Netware ID & password for the backup and stores the files. > > These three won't store the password. Every time you run a manual incremental or a scheduled backup, you get prompted. > > The error shows as: > > 11/21/2001 19:36:57 ANS1880E TSA Connect error, > NWSMConnectToTargetService 'CTRL3' > password file 'CTRL3\SYS:TIVOLI/TSM/CLIENT/BA/TSM.PWD'. > Userid = 'adsm_support' > failed with cc = FFFDFFD7 > > When you try a manual backup, the dsmerror.log writes the same thing, and on the screen you are prompted for the id & pw again. The TSM.PWD file gets updated with the same date and time. > > The DSM.opt file is set for passwordaccess generate and nwpwfile is set to yes. > > Any ideas?? > > Thanks, > > Stormy Maddux > Systems Engineer > 650-599-1187 -- Jim Kirkman AIS - Systems UNC-Chapel Hill 966-5884
Re: Netware Client Password failure
Stormy, Have you tried deleting the existing .pwd files in the BA directory then running a manual and re-entering the info? If so, then I would recommend backing off to a 4.1 rev of the client. Also, as with any Netware problem, make sure you have the latest TSA nlms, tsa5up7 last time I checked. Are you getting prompted for the Novell username and pwd, or the TSM one? I'm having a problem on our Netware cluster nodes that's similar, scheduled backups run for a couple of nights and then fail because of a prompt for the TSM userid and pwd. This seems to be a problem since I upgraded our server from 3.1.x to 4.1.4. Very frustrating. Stormy Maddux wrote: > I have three TSM 4.2.1 Netware 5.0 clients that won't perform a scheduled backup. > > Normally when you first setup the client and register the node, the first time it >prompts you to enter the Netware ID & password for the backup and stores the files. > > These three won't store the password. Every time you run a manual incremental or a >scheduled backup, you get prompted. > > The error shows as: > > 11/21/2001 19:36:57 ANS1880E TSA Connect error, > NWSMConnectToTargetService 'CTRL3' > password file 'CTRL3\SYS:TIVOLI/TSM/CLIENT/BA/TSM.PWD'. > Userid = 'adsm_support' > failed with cc = FFFDFFD7 > > When you try a manual backup, the dsmerror.log writes the same thing, and on the >screen you are prompted for the id & pw again. The TSM.PWD file gets updated with >the same date and time. > > The DSM.opt file is set for passwordaccess generate and nwpwfile is set to yes. > > Any ideas?? > > Thanks, > > Stormy Maddux > Systems Engineer > 650-599-1187 -- Jim Kirkman AIS - Systems UNC-Chapel Hill 966-5884
Netware Client Password failure
I have three TSM 4.2.1 Netware 5.0 clients that won't perform a scheduled backup. Normally when you first setup the client and register the node, the first time it prompts you to enter the Netware ID & password for the backup and stores the files. These three won't store the password. Every time you run a manual incremental or a scheduled backup, you get prompted. The error shows as: 11/21/2001 19:36:57 ANS1880E TSA Connect error, NWSMConnectToTargetService 'CTRL3' password file 'CTRL3\SYS:TIVOLI/TSM/CLIENT/BA/TSM.PWD'. Userid = 'adsm_support' failed with cc = FFFDFFD7 When you try a manual backup, the dsmerror.log writes the same thing, and on the screen you are prompted for the id & pw again. The TSM.PWD file gets updated with the same date and time. The DSM.opt file is set for passwordaccess generate and nwpwfile is set to yes. Any ideas?? Thanks, Stormy Maddux Systems Engineer 650-599-1187