Re: audit library STILL unsuccessful!
Marc, I was looking at your I/O error code and found this: CC=301 - "Check the drive for jammed volumes. On AIX, display the errpt to check for hardware errors." KEY=05 - "illegal request" Hope this helps. Roger C Cook RCG Information Services -Original Message- From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED]]On Behalf Of David Longo Sent: Wednesday, March 28, 2001 1:11 PM To: [EMAIL PROTECTED] Subject: Re: audit library STILL unsuccessful! I guess you're down to that one slot now. Have you looked in the library to see what is physically in this slot if anything? (Use a good flashlight if you don't want to open library). If something is there, see what TSM says about where that volume is. Maybe the barcode on this volume really is bad/missing. Last resort is reinitialize STK library so it does it's audit/inventory and then run TSM audit. You may get another messasge(s) with first TSM audit run. Should be ok on 2nd pass. David B. Longo System Administrator Health First, Inc. 3300 Fiske Blvd. Rockledge, FL 32955-4305 PH 321.434.5536 Pager 321.634.8230 Fax:321.434.5525 [EMAIL PROTECTED] >>> [EMAIL PROTECTED] 03/28/01 12:50PM >>> Thankyou to everyone that is helping! okay, i ran this and you are right... there was NOT an entry for slot 210. Now what? If I run an audit, it will still error out with : 03/27/01 13:56:55 ANR8788W Unable to read the barcode of cartridge in slot-id 210 in library TEKWOLF; loading in drive to read label. 03/27/01 13:56:56 ANR8300E I/O error on library TEKWOLF (OP=6C03, CC=301, KEY=05, ASC=30, ASCQ=00, SENSE=70.00.05.00.00.00- .00.0C.00.00.00.00.30.00.00.00.00.00.00.00., Description- =Cartridge load failure). Refer to Appendix B in the 'Messages' manual for recommended action. 03/27/01 13:56:59 ANR8460E AUDIT LIBRARY process for library TEKWOLF failed David Longo cc: Sent by: "ADSM: DistSubject: Re: audit library STILL unsuccessful! Stor Manager" <[EMAIL PROTECTED] U> 03/28/2001 12:26 PM Please respond to "ADSM: Dist Stor Manager" - (on vwall2) email-body was scanned and no virus found - you can use: q libvol - but that is in volume name order. Use the select statement: select home_element,volume_name from libvolumes order by home_element This will give you the list in element order and make it easy to find what TSM thinks is in a slot in your library. If you ran the audit already it may have already deleted/corrected the entry in TSM to match the library so you may not be able to tell what WAS in that slot. David B. Longo System Administrator Health First, Inc. 3300 Fiske Blvd. Rockledge, FL 32955-4305 PH 321.434.5536 Pager 321.634.8230 Fax:321.434.5525 [EMAIL PROTECTED] >>> [EMAIL PROTECTED] 03/28/01 12:06PM >>> Is there a way to find out what Volume TSM thinks is in a particular Slot (Element ID) I need to find out what volume TSM thinks is in slot 210 so that I can check it out of the library... (Slot 210 is empty) Marc D Levitan To: "ADSM: Dist Stor Manager" <[EMAIL PROTECTED]> 03/28/2001 cc: 11:23 AM Subject: Re: audit library STILL unsuccessful!(Document link: Marc D Levitan) Unfortunately, i don't know what volume is supposed to go in the slot! =) (I can't checkout a volume that i don't know what it is...) I also checked ALL of my volumes for their element number hoping that I would find one that had slot 210. No luck. Roger C Cook cc: Sent by: Subject: Re: audit library STILL unsuccessful! "ADSM: Dist Stor Manager" <[EMAIL PROTECTED] RIST.EDU> 03/28/2001 11:14 AM Please respond to "ADSM: Dist Stor Manager" If you cannot locate the volume and manually put it into the slot (which I had to do for a couple that were in the wrong slot), you will need to use FORCE=YES (which I also had to use). Luckily the ones I could not locate were scratch volumes. Roger C Cook RCG Information Services -Original M
Re: audit library STILL unsuccessful!
David, If the library had a problem reading the barcode of a tape, it (TSM) will mount the tape and read the label. Since most TSM operations read the label after mounting a tape, other than AUDIT, I allow tapes with "bad" barcodes but good labels to remain in the inventory. George Lesho Storage/System Admin AFC Enterprises David Longo <[EMAIL PROTECTED]> on 03/28/2001 10:18:44 AM Please respond to "ADSM: Dist Stor Manager" <[EMAIL PROTECTED]> To: [EMAIL PROTECTED] cc:(bcc: George Lesho/Partners/AFC) Fax to: Subject: Re: audit library STILL unsuccessful! The message when you used "checklabel=barcode" about "unabel to read label, Loading in drive..". With checklabel=barcode it does not actually read labels, just reads libraries internal memory on it's inventory. It is actually adjusting *SM's inventory to match the libraries. If you physically look through window of your library you will see that there are no tapes in those slots. If you after runing this and see these messges, then immediately run audit again there should be no messages - if so then there is some kind of problem. Regular audits prevent/correct inconsistencies in inventories. I always run one when I or someone else has been in library. Also run when there are no tapes mounted or it could take a very lonng time, even with checklabel=barcode. David B. Longo System Administrator Health First, Inc. 3300 Fiske Blvd. Rockledge, FL 32955-4305 PH 321.434.5536 Pager 321.634.8230 Fax:321.434.5525 [EMAIL PROTECTED] >>> [EMAIL PROTECTED] 03/28/01 10:48AM >>> I have made progress though... the original issue is at the bottom. I ran a audit library Tekwolf checklabel=barcode and this is what I got... 03/27/01 13:56:42 ANR2017I Administrator ADMIN issued command: AUDIT LIBRARY tekwolf checkl=barcode 03/27/01 13:56:42 ANR0984I Process 302 for AUDIT LIBRARY started in the BACKGROUND at 13:56:42. 03/27/01 13:56:42 ANR8457I AUDIT LIBRARY: Operation for library TEKWOLF started as process 302. 03/27/01 13:56:53 ANR8788W Unable to read the barcode of cartridge in slot-id 47 in library TEKWOLF; loading in drive to read label. 03/27/01 13:56:53 ANR8788W Unable to read the barcode of cartridge in slot-id 184 in library TEKWOLF; loading in drive to read label. 03/27/01 13:56:53 ANR8788W Unable to read the barcode of cartridge in slot-id 197 in library TEKWOLF; loading in drive to read label. 03/27/01 13:56:55 ANR8788W Unable to read the barcode of cartridge in slot-id 204 in library TEKWOLF; loading in drive to read label. 03/27/01 13:56:55 ANR8788W Unable to read the barcode of cartridge in slot-id 210 in library TEKWOLF; loading in drive to read label. 03/27/01 13:56:56 ANR8300E I/O error on library TEKWOLF (OP=6C03, CC=301, KEY=05, ASC=30, ASCQ=00, SENSE=70.00.05.00.00.00- .00.0C.00.00.00.00.30.00.00.00.00.00.00.00., Description- =Cartridge load failure). Refer to Appendix B in the 'Messages' manual for recommended action. 03/27/01 13:56:59 ANR8460E AUDIT LIBRARY process for library TEKWOLF failed. 03/27/01 13:56:59 ANR0985I Process 302 for AUDIT LIBRARY running in the BACKGROUND completed with completion state FAILURE at 13:56:59. SO I looked up which volumes were in the element slot numbers and TRIED to check them out and got this: ANR2017I Administrator ADMIN issued command: CHECKOUT LIBVOLUME TEKWOLF 000224 CHECKLABEL=YES FORCE=NO REMOVE=YES ANR0984I Process 307 for CHECKOUT LIBVOLUME started in the BACKGROUND at 09:07:04. ANR8434I CHECKOUT LIBVOLUME: Operation for volume 000224 in library TEKWOLF started as process 307. ANR0609I CHECKOUT LIBVOLUME started as process 307. ANR8300E I/O error on library TEKWOLF (OP=6C03, CC=314, KEY=05, ASC=3B, ASCQ=0E, SENSE=70.00.05.00.00.00.00.0C.00.00.00.00.3B.0E.00.00.00.00.00.00., Description=The source slot or drive was empty in an attempt to move a volume). Refer to Appendix B in the 'Messages' manual for recommended action. So... I decided to check out the volumes WITHOUT checking the Label: ANR2017I Administrator ADMIN issued command: CHECKOUT LIBVOLUME TEKWOLF 000378 CHECKLABEL=NO FORCE=NO REMOVE=YES ANR0984I Process 315 for CHECKOUT LIBVOLUME started in the BACKGROUND at 09:26:09. ANR8434I CHECKOUT LIBVOLUME: Operation for volume 000378 in library TEKWOLF started as process 315. ANR0609I CHECKOUT LIBVOLUME started as process 315. ANRD mmsscsi.c(9067): Could not move volume 0003
Re: audit library STILL unsuccessful!
I guess you're down to that one slot now. Have you looked in the library to see what is physically in this slot if anything? (Use a good flashlight if you don't want to open library). If something is there, see what TSM says about where that volume is. Maybe the barcode on this volume really is bad/missing. Last resort is reinitialize STK library so it does it's audit/inventory and then run TSM audit. You may get another messasge(s) with first TSM audit run. Should be ok on 2nd pass. David B. Longo System Administrator Health First, Inc. 3300 Fiske Blvd. Rockledge, FL 32955-4305 PH 321.434.5536 Pager 321.634.8230 Fax:321.434.5525 [EMAIL PROTECTED] >>> [EMAIL PROTECTED] 03/28/01 12:50PM >>> Thankyou to everyone that is helping! okay, i ran this and you are right... there was NOT an entry for slot 210. Now what? If I run an audit, it will still error out with : 03/27/01 13:56:55 ANR8788W Unable to read the barcode of cartridge in slot-id 210 in library TEKWOLF; loading in drive to read label. 03/27/01 13:56:56 ANR8300E I/O error on library TEKWOLF (OP=6C03, CC=301, KEY=05, ASC=30, ASCQ=00, SENSE=70.00.05.00.00.00- .00.0C.00.00.00.00.30.00.00.00.00.00.00.00., Description- =Cartridge load failure). Refer to Appendix B in the 'Messages' manual for recommended action. 03/27/01 13:56:59 ANR8460E AUDIT LIBRARY process for library TEKWOLF failed David Longo cc: Sent by: "ADSM: DistSubject: Re: audit library STILL unsuccessful! Stor Manager" <[EMAIL PROTECTED] U> 03/28/2001 12:26 PM Please respond to "ADSM: Dist Stor Manager" - (on vwall2) email-body was scanned and no virus found - you can use: q libvol - but that is in volume name order. Use the select statement: select home_element,volume_name from libvolumes order by home_element This will give you the list in element order and make it easy to find what TSM thinks is in a slot in your library. If you ran the audit already it may have already deleted/corrected the entry in TSM to match the library so you may not be able to tell what WAS in that slot. David B. Longo System Administrator Health First, Inc. 3300 Fiske Blvd. Rockledge, FL 32955-4305 PH 321.434.5536 Pager 321.634.8230 Fax:321.434.5525 [EMAIL PROTECTED] >>> [EMAIL PROTECTED] 03/28/01 12:06PM >>> Is there a way to find out what Volume TSM thinks is in a particular Slot (Element ID) I need to find out what volume TSM thinks is in slot 210 so that I can check it out of the library... (Slot 210 is empty) Marc D Levitan To: "ADSM: Dist Stor Manager" <[EMAIL PROTECTED]> 03/28/2001 cc: 11:23 AM Subject: Re: audit library STILL unsuccessful!(Document link: Marc D Levitan) Unfortunately, i don't know what volume is supposed to go in the slot! =) (I can't checkout a volume that i don't know what it is...) I also checked ALL of my volumes for their element number hoping that I would find one that had slot 210. No luck. Roger C Cook cc: Sent by: Subject: Re: audit library STILL unsuccessful! "ADSM: Dist Stor Manager" <[EMAIL PROTECTED] RIST.EDU> 03/28/2001 11:14 AM Please respond to "ADSM: Dist Stor Manager" If you cannot locate the volume and manually put it into the slot (which I had to do for a couple that were in the wrong slot), you will need to use FORCE=YES (which I also had to use). Luckily the ones I could not locate were scratch volumes. Roger C Cook RCG Information Services -Original Message- From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED]]On Behalf Of Marc Levitan Sent: Wednesday, March 28, 2001 10:48 AM To: [EMAIL PROTECTED] Subject: audit library STILL unsuccessful! I have made progress though... the original issue is at the bottom. I ran a audit library Tekwolf checklabel=barcode and this is what I got... 03/27/01 13:56:42 ANR2017I Administrator ADMIN issued command: AUDIT LIBRARY tekwolf checkl=barcode 03/27/01 13:56:
Re: audit library STILL unsuccessful!
Thankyou to everyone that is helping! okay, i ran this and you are right... there was NOT an entry for slot 210. Now what? If I run an audit, it will still error out with : 03/27/01 13:56:55 ANR8788W Unable to read the barcode of cartridge in slot-id 210 in library TEKWOLF; loading in drive to read label. 03/27/01 13:56:56 ANR8300E I/O error on library TEKWOLF (OP=6C03, CC=301, KEY=05, ASC=30, ASCQ=00, SENSE=70.00.05.00.00.00- .00.0C.00.00.00.00.30.00.00.00.00.00.00.00., Description- =Cartridge load failure). Refer to Appendix B in the 'Messages' manual for recommended action. 03/27/01 13:56:59 ANR8460E AUDIT LIBRARY process for library TEKWOLF failed David Longo cc: Sent by: "ADSM: Dist Subject: Re: audit library STILL unsuccessful! Stor Manager" <[EMAIL PROTECTED] U> 03/28/2001 12:26 PM Please respond to "ADSM: Dist Stor Manager" - (on vwall2) email-body was scanned and no virus found - you can use: q libvol - but that is in volume name order. Use the select statement: select home_element,volume_name from libvolumes order by home_element This will give you the list in element order and make it easy to find what TSM thinks is in a slot in your library. If you ran the audit already it may have already deleted/corrected the entry in TSM to match the library so you may not be able to tell what WAS in that slot. David B. Longo System Administrator Health First, Inc. 3300 Fiske Blvd. Rockledge, FL 32955-4305 PH 321.434.5536 Pager 321.634.8230 Fax:321.434.5525 [EMAIL PROTECTED] >>> [EMAIL PROTECTED] 03/28/01 12:06PM >>> Is there a way to find out what Volume TSM thinks is in a particular Slot (Element ID) I need to find out what volume TSM thinks is in slot 210 so that I can check it out of the library... (Slot 210 is empty) Marc D Levitan To: "ADSM: Dist Stor Manager" <[EMAIL PROTECTED]> 03/28/2001 cc: 11:23 AM Subject: Re: audit library STILL unsuccessful!(Document link: Marc D Levitan) Unfortunately, i don't know what volume is supposed to go in the slot! =) (I can't checkout a volume that i don't know what it is...) I also checked ALL of my volumes for their element number hoping that I would find one that had slot 210. No luck. Roger C Cook cc: Sent by: Subject: Re: audit library STILL unsuccessful! "ADSM: Dist Stor Manager" <[EMAIL PROTECTED] RIST.EDU> 03/28/2001 11:14 AM Please respond to "ADSM: Dist Stor Manager" If you cannot locate the volume and manually put it into the slot (which I had to do for a couple that were in the wrong slot), you will need to use FORCE=YES (which I also had to use). Luckily the ones I could not locate were scratch volumes. Roger C Cook RCG Information Services -Original Message- From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED]]On Behalf Of Marc Levitan Sent: Wednesday, March 28, 2001 10:48 AM To: [EMAIL PROTECTED] Subject: audit library STILL unsuccessful! I have made progress though... the original issue is at the bottom. I ran a audit library Tekwolf checklabel=barcode and this is what I got... 03/27/01 13:56:42 ANR2017I Administrator ADMIN issued command: AUDIT LIBRARY tekwolf checkl=barcode 03/27/01 13:56:42 ANR0984I Process 302 for AUDIT LIBRARY started in the BACKGROUND at 13:56:42. 03/27/01 13:56:42 ANR8457I AUDIT LIBRARY: Operation for library TEKWOLF started as process 302. 03/27/01 13:56:53 ANR8788W Unable to read the barcode of cartridge in slot-id 47 in library TEKWOLF; loading in drive to read label. 03/27/01 13:56:53 ANR8788W Unable to read the barcode of cartridge in slot-id 184 in library TEKWOLF; loading in drive to read label. 03/27/01 13:56:53 ANR8788W Unable to read the barcode of cartridge in slot-id 197 in library TEKWOLF; loading in drive
Re: audit library STILL unsuccessful!
q libvol tekwolf should give you a list On Wednesday, March 28, 2001 9:06 AM, Marc Levitan [SMTP:[EMAIL PROTECTED]] wrote: > Is there a way to find out what Volume TSM thinks is in a particular Slot > (Element ID) > I need to find out what volume TSM thinks is in slot 210 so that I can > check it out of the library... (Slot 210 is empty) > > Marc D Levitan > To: "ADSM: Dist Stor Manager" > <[EMAIL PROTECTED]> > 03/28/2001 cc: > 11:23 AM Subject: Re: audit library STILL > unsuccessful!(Document link: Marc D Levitan) > > > > > > Unfortunately, i don't know what volume is supposed to go in the slot! =) > (I can't checkout a volume that i don't know what it is...) > I also checked ALL of my volumes for their element number hoping that I > would find one that had slot 210. No luck. > > > > Roger C Cook > .COM> cc: > Sent by: Subject: Re: audit library STILL > unsuccessful! > "ADSM: Dist > Stor Manager" > <[EMAIL PROTECTED] > RIST.EDU> > > > 03/28/2001 > 11:14 AM > Please > respond to > "ADSM: Dist > Stor Manager" > > > > > > If you cannot locate the volume and manually put it into the slot (which I > had to do for a couple that were in the wrong slot), you will need to use > FORCE=YES (which I also had to use). Luckily the ones I could not locate > were scratch volumes. > > Roger C Cook > RCG Information Services > > > > -Original Message- > From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED]]On Behalf Of > Marc Levitan > Sent: Wednesday, March 28, 2001 10:48 AM > To: [EMAIL PROTECTED] > Subject: audit library STILL unsuccessful! > > > I have made progress though... the original issue is at the bottom. > > > I ran a audit library Tekwolf checklabel=barcode and this is what I got... > > 03/27/01 13:56:42 ANR2017I Administrator ADMIN issued command: AUDIT > LIBRARY >tekwolf checkl=barcode > 03/27/01 13:56:42 ANR0984I Process 302 for AUDIT LIBRARY started in the >BACKGROUND at 13:56:42. > 03/27/01 13:56:42 ANR8457I AUDIT LIBRARY: Operation for library TEKWOLF >started as process 302. > 03/27/01 13:56:53 ANR8788W Unable to read the barcode of cartridge in >slot-id 47 in library TEKWOLF; loading in drive to > read >label. > 03/27/01 13:56:53 ANR8788W Unable to read the barcode of cartridge in >slot-id 184 in library TEKWOLF; loading in drive to > read >label. > 03/27/01 13:56:53 ANR8788W Unable to read the barcode of cartridge in >slot-id 197 in library TEKWOLF; loading in drive to > read >label. > 03/27/01 13:56:55 ANR8788W Unable to read the barcode of cartridge in >slot-id 204 in library TEKWOLF; loading in drive to > read >label. > 03/27/01 13:56:55 ANR8788W Unable to read the barcode of cartridge in >slot-id 210 in library TEKWOLF; loading in drive to > read >label. > 03/27/01 13:56:56 ANR8300E I/O error on library TEKWOLF (OP=6C03, >CC=301, KEY=05, ASC=30, ASCQ=00, > SENSE=70.00.05.00.00.00- >.00.0C.00.00.00.00.30.00.00.00.00.00.00.00., > Description- >=Cartridge load failure). Refer to Appendix B in > the >'Messages' manual for recommended action. > 03/27/01 13:56:59 ANR8460E AUDIT LIBRARY process for library TEKWOLF > failed. > 03/27/01 13:56:59 ANR0985I Process 302 for AUDIT LIBRARY running in the >BACKGROUND completed with completion state FAILURE > at >13:56:59. > SO I looked up which volumes were in the element slot numbers and TRIED to > check them out and got this: > > ANR2017I Administrator ADMIN issued command: CHECKOUT LIBVOLUME TEKWOLF > 000224 > CHECKLABEL=YES FORCE=NO REMOVE=YES > ANR0984I Process 307 for CHECKOUT LIBVOLUME started in the BACKGROUN
Re: audit library STILL unsuccessful!
you can use: q libvol - but that is in volume name order. Use the select statement: select home_element,volume_name from libvolumes order by home_element This will give you the list in element order and make it easy to find what TSM thinks is in a slot in your library. If you ran the audit already it may have already deleted/corrected the entry in TSM to match the library so you may not be able to tell what WAS in that slot. David B. Longo System Administrator Health First, Inc. 3300 Fiske Blvd. Rockledge, FL 32955-4305 PH 321.434.5536 Pager 321.634.8230 Fax:321.434.5525 [EMAIL PROTECTED] >>> [EMAIL PROTECTED] 03/28/01 12:06PM >>> Is there a way to find out what Volume TSM thinks is in a particular Slot (Element ID) I need to find out what volume TSM thinks is in slot 210 so that I can check it out of the library... (Slot 210 is empty) Marc D Levitan To: "ADSM: Dist Stor Manager" <[EMAIL PROTECTED]> 03/28/2001 cc: 11:23 AM Subject: Re: audit library STILL unsuccessful!(Document link: Marc D Levitan) Unfortunately, i don't know what volume is supposed to go in the slot! =) (I can't checkout a volume that i don't know what it is...) I also checked ALL of my volumes for their element number hoping that I would find one that had slot 210. No luck. Roger C Cook cc: Sent by: Subject: Re: audit library STILL unsuccessful! "ADSM: Dist Stor Manager" <[EMAIL PROTECTED] RIST.EDU> 03/28/2001 11:14 AM Please respond to "ADSM: Dist Stor Manager" If you cannot locate the volume and manually put it into the slot (which I had to do for a couple that were in the wrong slot), you will need to use FORCE=YES (which I also had to use). Luckily the ones I could not locate were scratch volumes. Roger C Cook RCG Information Services -Original Message- From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED]]On Behalf Of Marc Levitan Sent: Wednesday, March 28, 2001 10:48 AM To: [EMAIL PROTECTED] Subject: audit library STILL unsuccessful! I have made progress though... the original issue is at the bottom. I ran a audit library Tekwolf checklabel=barcode and this is what I got... 03/27/01 13:56:42 ANR2017I Administrator ADMIN issued command: AUDIT LIBRARY tekwolf checkl=barcode 03/27/01 13:56:42 ANR0984I Process 302 for AUDIT LIBRARY started in the BACKGROUND at 13:56:42. 03/27/01 13:56:42 ANR8457I AUDIT LIBRARY: Operation for library TEKWOLF started as process 302. 03/27/01 13:56:53 ANR8788W Unable to read the barcode of cartridge in slot-id 47 in library TEKWOLF; loading in drive to read label. 03/27/01 13:56:53 ANR8788W Unable to read the barcode of cartridge in slot-id 184 in library TEKWOLF; loading in drive to read label. 03/27/01 13:56:53 ANR8788W Unable to read the barcode of cartridge in slot-id 197 in library TEKWOLF; loading in drive to read label. 03/27/01 13:56:55 ANR8788W Unable to read the barcode of cartridge in slot-id 204 in library TEKWOLF; loading in drive to read label. 03/27/01 13:56:55 ANR8788W Unable to read the barcode of cartridge in slot-id 210 in library TEKWOLF; loading in drive to read label. 03/27/01 13:56:56 ANR8300E I/O error on library TEKWOLF (OP=6C03, CC=301, KEY=05, ASC=30, ASCQ=00, SENSE=70.00.05.00.00.00- .00.0C.00.00.00.00.30.00.00.00.00.00.00.00., Description- =Cartridge load failure). Refer to Appendix B in the 'Messages' manual for recommended action. 03/27/01 13:56:59 ANR8460E AUDIT LIBRARY process for library TEKWOLF failed. 03/27/01 13:56:59 ANR0985I Process 302 for AUDIT LIBRARY running in the BACKGROUND completed with completion state FAILURE at 13:56:59. SO I looked up which volumes were in the element slot numbers and TRIED to check them out and got this: ANR2017I Administrator ADMIN issued command: CHECKOUT LIBVOLUME TEKWOLF 000224 CHECKLABEL=YES FORCE=NO REMOVE=YES ANR0984I Process 307 for CHECKOUT LIBVOLUME started in the BACKGROUND at 09:07:04. ANR8434I CHECKOUT LIBVOLUME: Operation for volume 000224 in library TEKWOLF sta
Re: audit library STILL unsuccessful!
I addition to: select * from libvolumes where home_element=(slot#) which shows a particular slot, you can run: select home_element, volume_name from libvolumes order by home_element which will return a complete inventory in slot # order. I had to run this and output it to a file and print it when I did my manual inventory. After that and a little more checkout/checkout, the audit lib finally worked for me. Roger C Cook RCG Information Services -Original Message- From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED]]On Behalf Of Marc Levitan Sent: Wednesday, March 28, 2001 12:06 PM To: [EMAIL PROTECTED] Subject: Re: audit library STILL unsuccessful! Is there a way to find out what Volume TSM thinks is in a particular Slot (Element ID) I need to find out what volume TSM thinks is in slot 210 so that I can check it out of the library... (Slot 210 is empty) Marc D Levitan To: "ADSM: Dist Stor Manager" <[EMAIL PROTECTED]> 03/28/2001 cc: 11:23 AM Subject: Re: audit library STILL unsuccessful!(Document link: Marc D Levitan) Unfortunately, i don't know what volume is supposed to go in the slot! =) (I can't checkout a volume that i don't know what it is...) I also checked ALL of my volumes for their element number hoping that I would find one that had slot 210. No luck. Roger C Cook cc: Sent by: Subject: Re: audit library STILL unsuccessful! "ADSM: Dist Stor Manager" <[EMAIL PROTECTED] RIST.EDU> 03/28/2001 11:14 AM Please respond to "ADSM: Dist Stor Manager" If you cannot locate the volume and manually put it into the slot (which I had to do for a couple that were in the wrong slot), you will need to use FORCE=YES (which I also had to use). Luckily the ones I could not locate were scratch volumes. Roger C Cook RCG Information Services -Original Message- From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED]]On Behalf Of Marc Levitan Sent: Wednesday, March 28, 2001 10:48 AM To: [EMAIL PROTECTED] Subject: audit library STILL unsuccessful! I have made progress though... the original issue is at the bottom. I ran a audit library Tekwolf checklabel=barcode and this is what I got... 03/27/01 13:56:42 ANR2017I Administrator ADMIN issued command: AUDIT LIBRARY tekwolf checkl=barcode 03/27/01 13:56:42 ANR0984I Process 302 for AUDIT LIBRARY started in the BACKGROUND at 13:56:42. 03/27/01 13:56:42 ANR8457I AUDIT LIBRARY: Operation for library TEKWOLF started as process 302. 03/27/01 13:56:53 ANR8788W Unable to read the barcode of cartridge in slot-id 47 in library TEKWOLF; loading in drive to read label. 03/27/01 13:56:53 ANR8788W Unable to read the barcode of cartridge in slot-id 184 in library TEKWOLF; loading in drive to read label. 03/27/01 13:56:53 ANR8788W Unable to read the barcode of cartridge in slot-id 197 in library TEKWOLF; loading in drive to read label. 03/27/01 13:56:55 ANR8788W Unable to read the barcode of cartridge in slot-id 204 in library TEKWOLF; loading in drive to read label. 03/27/01 13:56:55 ANR8788W Unable to read the barcode of cartridge in slot-id 210 in library TEKWOLF; loading in drive to read label. 03/27/01 13:56:56 ANR8300E I/O error on library TEKWOLF (OP=6C03, CC=301, KEY=05, ASC=30, ASCQ=00, SENSE=70.00.05.00.00.00- .00.0C.00.00.00.00.30.00.00.00.00.00.00.00., Description- =Cartridge load failure). Refer to Appendix B in the 'Messages' manual for recommended action. 03/27/01 13:56:59 ANR8460E AUDIT LIBRARY process for library TEKWOLF failed. 03/27/01 13:56:59 ANR0985I Process 302 for AUDIT LIBRARY running in the BACKGROUND completed with completion state FAILURE at 13:56:59. SO I looked up which volumes were in the element slot numbers and TRIED to check them out and got this: ANR2017I Administrator ADMIN issued command: CHECKOUT LIBVOLUME TEKWOLF 000224 CHECKLABEL=YES FORCE=NO REMOVE=YES ANR0984I Process 307 for CHECKOUT LIBVOLUME started in the BACKGROUND at 09:07:04. ANR8434I CHECKOUT LIBVOLUME: Operation for volume 000224 in library TEKWOLF started
Re: audit library STILL unsuccessful!
To find out what TSM thinks is in a slot: select * from libvolumes where home_element=210 (or any other slot #) Good luck, I know what a pain this is. Roger C Cook RCG Information Services -Original Message- From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED]]On Behalf Of Marc Levitan Sent: Wednesday, March 28, 2001 11:23 AM To: [EMAIL PROTECTED] Subject: Re: audit library STILL unsuccessful! Unfortunately, i don't know what volume is supposed to go in the slot! =) (I can't checkout a volume that i don't know what it is...) I also checked ALL of my volumes for their element number hoping that I would find one that had slot 210. No luck. Roger C Cook cc: Sent by: Subject: Re: audit library STILL unsuccessful! "ADSM: Dist Stor Manager" <[EMAIL PROTECTED] RIST.EDU> 03/28/2001 11:14 AM Please respond to "ADSM: Dist Stor Manager" If you cannot locate the volume and manually put it into the slot (which I had to do for a couple that were in the wrong slot), you will need to use FORCE=YES (which I also had to use). Luckily the ones I could not locate were scratch volumes. Roger C Cook RCG Information Services -Original Message- From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED]]On Behalf Of Marc Levitan Sent: Wednesday, March 28, 2001 10:48 AM To: [EMAIL PROTECTED] Subject: audit library STILL unsuccessful! I have made progress though... the original issue is at the bottom. I ran a audit library Tekwolf checklabel=barcode and this is what I got... 03/27/01 13:56:42 ANR2017I Administrator ADMIN issued command: AUDIT LIBRARY tekwolf checkl=barcode 03/27/01 13:56:42 ANR0984I Process 302 for AUDIT LIBRARY started in the BACKGROUND at 13:56:42. 03/27/01 13:56:42 ANR8457I AUDIT LIBRARY: Operation for library TEKWOLF started as process 302. 03/27/01 13:56:53 ANR8788W Unable to read the barcode of cartridge in slot-id 47 in library TEKWOLF; loading in drive to read label. 03/27/01 13:56:53 ANR8788W Unable to read the barcode of cartridge in slot-id 184 in library TEKWOLF; loading in drive to read label. 03/27/01 13:56:53 ANR8788W Unable to read the barcode of cartridge in slot-id 197 in library TEKWOLF; loading in drive to read label. 03/27/01 13:56:55 ANR8788W Unable to read the barcode of cartridge in slot-id 204 in library TEKWOLF; loading in drive to read label. 03/27/01 13:56:55 ANR8788W Unable to read the barcode of cartridge in slot-id 210 in library TEKWOLF; loading in drive to read label. 03/27/01 13:56:56 ANR8300E I/O error on library TEKWOLF (OP=6C03, CC=301, KEY=05, ASC=30, ASCQ=00, SENSE=70.00.05.00.00.00- .00.0C.00.00.00.00.30.00.00.00.00.00.00.00., Description- =Cartridge load failure). Refer to Appendix B in the 'Messages' manual for recommended action. 03/27/01 13:56:59 ANR8460E AUDIT LIBRARY process for library TEKWOLF failed. 03/27/01 13:56:59 ANR0985I Process 302 for AUDIT LIBRARY running in the BACKGROUND completed with completion state FAILURE at 13:56:59. SO I looked up which volumes were in the element slot numbers and TRIED to check them out and got this: ANR2017I Administrator ADMIN issued command: CHECKOUT LIBVOLUME TEKWOLF 000224 CHECKLABEL=YES FORCE=NO REMOVE=YES ANR0984I Process 307 for CHECKOUT LIBVOLUME started in the BACKGROUND at 09:07:04. ANR8434I CHECKOUT LIBVOLUME: Operation for volume 000224 in library TEKWOLF started as process 307. ANR0609I CHECKOUT LIBVOLUME started as process 307. ANR8300E I/O error on library TEKWOLF (OP=6C03, CC=314, KEY=05, ASC=3B, ASCQ=0E, SENSE=70.00.05.00.00.00.00.0C.00.00.00.00.3B.0E.00.00.00.00.00.00., Description=The source slot or drive was empty in an attempt to move a volume). Refer to Appendix B in the 'Messages' manual for recommended action. So... I decided to check out the volumes WITHOUT checking the Label: ANR2017I Administrator ADMIN issued command: CHECKOUT LIBVOLUME TEKWOLF 000378 CHECKLABEL=NO FORCE=NO REMOVE=YES ANR0984I Process 315 for CHECKOUT LIBVOLUME started in the BACKGROUND at 09:26:09. ANR8434I CHECKOUT LIBVOLUME: Operation for volume 000378 in library TEKWOLF started as process 315. ANR0609I CHECKOUT LIBVOLUME started as process 315. ANR
Re: audit library STILL unsuccessful!
Is there a way to find out what Volume TSM thinks is in a particular Slot (Element ID) I need to find out what volume TSM thinks is in slot 210 so that I can check it out of the library... (Slot 210 is empty) Marc D Levitan To: "ADSM: Dist Stor Manager" <[EMAIL PROTECTED]> 03/28/2001 cc: 11:23 AM Subject: Re: audit library STILL unsuccessful!(Document link: Marc D Levitan) Unfortunately, i don't know what volume is supposed to go in the slot! =) (I can't checkout a volume that i don't know what it is...) I also checked ALL of my volumes for their element number hoping that I would find one that had slot 210. No luck. Roger C Cook cc: Sent by: Subject: Re: audit library STILL unsuccessful! "ADSM: Dist Stor Manager" <[EMAIL PROTECTED] RIST.EDU> 03/28/2001 11:14 AM Please respond to "ADSM: Dist Stor Manager" If you cannot locate the volume and manually put it into the slot (which I had to do for a couple that were in the wrong slot), you will need to use FORCE=YES (which I also had to use). Luckily the ones I could not locate were scratch volumes. Roger C Cook RCG Information Services -Original Message- From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED]]On Behalf Of Marc Levitan Sent: Wednesday, March 28, 2001 10:48 AM To: [EMAIL PROTECTED] Subject: audit library STILL unsuccessful! I have made progress though... the original issue is at the bottom. I ran a audit library Tekwolf checklabel=barcode and this is what I got... 03/27/01 13:56:42 ANR2017I Administrator ADMIN issued command: AUDIT LIBRARY tekwolf checkl=barcode 03/27/01 13:56:42 ANR0984I Process 302 for AUDIT LIBRARY started in the BACKGROUND at 13:56:42. 03/27/01 13:56:42 ANR8457I AUDIT LIBRARY: Operation for library TEKWOLF started as process 302. 03/27/01 13:56:53 ANR8788W Unable to read the barcode of cartridge in slot-id 47 in library TEKWOLF; loading in drive to read label. 03/27/01 13:56:53 ANR8788W Unable to read the barcode of cartridge in slot-id 184 in library TEKWOLF; loading in drive to read label. 03/27/01 13:56:53 ANR8788W Unable to read the barcode of cartridge in slot-id 197 in library TEKWOLF; loading in drive to read label. 03/27/01 13:56:55 ANR8788W Unable to read the barcode of cartridge in slot-id 204 in library TEKWOLF; loading in drive to read label. 03/27/01 13:56:55 ANR8788W Unable to read the barcode of cartridge in slot-id 210 in library TEKWOLF; loading in drive to read label. 03/27/01 13:56:56 ANR8300E I/O error on library TEKWOLF (OP=6C03, CC=301, KEY=05, ASC=30, ASCQ=00, SENSE=70.00.05.00.00.00- .00.0C.00.00.00.00.30.00.00.00.00.00.00.00., Description- =Cartridge load failure). Refer to Appendix B in the 'Messages' manual for recommended action. 03/27/01 13:56:59 ANR8460E AUDIT LIBRARY process for library TEKWOLF failed. 03/27/01 13:56:59 ANR0985I Process 302 for AUDIT LIBRARY running in the BACKGROUND completed with completion state FAILURE at 13:56:59. SO I looked up which volumes were in the element slot numbers and TRIED to check them out and got this: ANR2017I Administrator ADMIN issued command: CHECKOUT LIBVOLUME TEKWOLF 000224 CHECKLABEL=YES FORCE=NO REMOVE=YES ANR0984I Process 307 for CHECKOUT LIBVOLUME started in the BACKGROUND at 09:07:04. ANR8434I CHECKOUT LIBVOLUME: Operation for volume 000224 in library TEKWOLF started as process 307. ANR0609I CHECKOUT LIBVOLUME started as process 307. ANR8300E I/O error on library TEKWOLF (OP=6C03, CC=314, KEY=05, ASC=3B, ASCQ=0E, SENSE=70.00.05.00.00.00.00.0C.00.00.00.00.3B.0E.00.00.00.00.00.00., Description=The source slot or drive was empty in an attempt to move a volume). Refer to Appendix B in the 'Messages' manual for recommended action. So... I decided to check out the volumes WITHOUT checking the Label: ANR2017I Administrator ADMIN issued command: CHECKOUT LIBVOLUME TEKWOLF 000378 CHECKLABEL=NO FORCE=NO REMOVE=YES ANR0984I Process 315 for CHECKOUT LIBVOLUME started in the BACKGROUND at 09:26:09. ANR8434I CHECKOUT LIBVOLUME: Op
Re: audit library STILL unsuccessful!
The message when you used "checklabel=barcode" about "unabel to read label, Loading in drive..". With checklabel=barcode it does not actually read labels, just reads libraries internal memory on it's inventory. It is actually adjusting *SM's inventory to match the libraries. If you physically look through window of your library you will see that there are no tapes in those slots. If you after runing this and see these messges, then immediately run audit again there should be no messages - if so then there is some kind of problem. Regular audits prevent/correct inconsistencies in inventories. I always run one when I or someone else has been in library. Also run when there are no tapes mounted or it could take a very lonng time, even with checklabel=barcode. David B. Longo System Administrator Health First, Inc. 3300 Fiske Blvd. Rockledge, FL 32955-4305 PH 321.434.5536 Pager 321.634.8230 Fax:321.434.5525 [EMAIL PROTECTED] >>> [EMAIL PROTECTED] 03/28/01 10:48AM >>> I have made progress though... the original issue is at the bottom. I ran a audit library Tekwolf checklabel=barcode and this is what I got... 03/27/01 13:56:42 ANR2017I Administrator ADMIN issued command: AUDIT LIBRARY tekwolf checkl=barcode 03/27/01 13:56:42 ANR0984I Process 302 for AUDIT LIBRARY started in the BACKGROUND at 13:56:42. 03/27/01 13:56:42 ANR8457I AUDIT LIBRARY: Operation for library TEKWOLF started as process 302. 03/27/01 13:56:53 ANR8788W Unable to read the barcode of cartridge in slot-id 47 in library TEKWOLF; loading in drive to read label. 03/27/01 13:56:53 ANR8788W Unable to read the barcode of cartridge in slot-id 184 in library TEKWOLF; loading in drive to read label. 03/27/01 13:56:53 ANR8788W Unable to read the barcode of cartridge in slot-id 197 in library TEKWOLF; loading in drive to read label. 03/27/01 13:56:55 ANR8788W Unable to read the barcode of cartridge in slot-id 204 in library TEKWOLF; loading in drive to read label. 03/27/01 13:56:55 ANR8788W Unable to read the barcode of cartridge in slot-id 210 in library TEKWOLF; loading in drive to read label. 03/27/01 13:56:56 ANR8300E I/O error on library TEKWOLF (OP=6C03, CC=301, KEY=05, ASC=30, ASCQ=00, SENSE=70.00.05.00.00.00- .00.0C.00.00.00.00.30.00.00.00.00.00.00.00., Description- =Cartridge load failure). Refer to Appendix B in the 'Messages' manual for recommended action. 03/27/01 13:56:59 ANR8460E AUDIT LIBRARY process for library TEKWOLF failed. 03/27/01 13:56:59 ANR0985I Process 302 for AUDIT LIBRARY running in the BACKGROUND completed with completion state FAILURE at 13:56:59. SO I looked up which volumes were in the element slot numbers and TRIED to check them out and got this: ANR2017I Administrator ADMIN issued command: CHECKOUT LIBVOLUME TEKWOLF 000224 CHECKLABEL=YES FORCE=NO REMOVE=YES ANR0984I Process 307 for CHECKOUT LIBVOLUME started in the BACKGROUND at 09:07:04. ANR8434I CHECKOUT LIBVOLUME: Operation for volume 000224 in library TEKWOLF started as process 307. ANR0609I CHECKOUT LIBVOLUME started as process 307. ANR8300E I/O error on library TEKWOLF (OP=6C03, CC=314, KEY=05, ASC=3B, ASCQ=0E, SENSE=70.00.05.00.00.00.00.0C.00.00.00.00.3B.0E.00.00.00.00.00.00., Description=The source slot or drive was empty in an attempt to move a volume). Refer to Appendix B in the 'Messages' manual for recommended action. So... I decided to check out the volumes WITHOUT checking the Label: ANR2017I Administrator ADMIN issued command: CHECKOUT LIBVOLUME TEKWOLF 000378 CHECKLABEL=NO FORCE=NO REMOVE=YES ANR0984I Process 315 for CHECKOUT LIBVOLUME started in the BACKGROUND at 09:26:09. ANR8434I CHECKOUT LIBVOLUME: Operation for volume 000378 in library TEKWOLF started as process 315. ANR0609I CHECKOUT LIBVOLUME started as process 315. ANRD mmsscsi.c(9067): Could not move volume 000378 from slot 204 to slot 1010. ANR8827E No Entry/Exit port is available on library TEKWOLF. ANR8307I 083: Remove ECARTRIDGE volume 000378 from slot with element number 204 of library TEKWOLF; issue 'REPLY' along with the request ID when ready. ANR2017I Administrator ADMIN issued command: REPL 83 ANR8499I Command accepted. ANR8438I CHECKOUT LIBVOLUME for volume 000378 in library TEKWOLF completed successfully. ANR0985I Process 315 for CHECKOUT LIBVOLUME running in the BACKGROUND completed This was SUCCESSFUL!!! Now I re-ran the Audit Library Tekwolf checklabel=barcode and received an error: 03/27/01 13:56:55 ANR8788W Unable to read the barcode of cartridge in
Re: audit library STILL unsuccessful!
Unfortunately, i don't know what volume is supposed to go in the slot! =) (I can't checkout a volume that i don't know what it is...) I also checked ALL of my volumes for their element number hoping that I would find one that had slot 210. No luck. Roger C Cook cc: Sent by: Subject: Re: audit library STILL unsuccessful! "ADSM: Dist Stor Manager" <[EMAIL PROTECTED] RIST.EDU> 03/28/2001 11:14 AM Please respond to "ADSM: Dist Stor Manager" If you cannot locate the volume and manually put it into the slot (which I had to do for a couple that were in the wrong slot), you will need to use FORCE=YES (which I also had to use). Luckily the ones I could not locate were scratch volumes. Roger C Cook RCG Information Services -Original Message- From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED]]On Behalf Of Marc Levitan Sent: Wednesday, March 28, 2001 10:48 AM To: [EMAIL PROTECTED] Subject: audit library STILL unsuccessful! I have made progress though... the original issue is at the bottom. I ran a audit library Tekwolf checklabel=barcode and this is what I got... 03/27/01 13:56:42 ANR2017I Administrator ADMIN issued command: AUDIT LIBRARY tekwolf checkl=barcode 03/27/01 13:56:42 ANR0984I Process 302 for AUDIT LIBRARY started in the BACKGROUND at 13:56:42. 03/27/01 13:56:42 ANR8457I AUDIT LIBRARY: Operation for library TEKWOLF started as process 302. 03/27/01 13:56:53 ANR8788W Unable to read the barcode of cartridge in slot-id 47 in library TEKWOLF; loading in drive to read label. 03/27/01 13:56:53 ANR8788W Unable to read the barcode of cartridge in slot-id 184 in library TEKWOLF; loading in drive to read label. 03/27/01 13:56:53 ANR8788W Unable to read the barcode of cartridge in slot-id 197 in library TEKWOLF; loading in drive to read label. 03/27/01 13:56:55 ANR8788W Unable to read the barcode of cartridge in slot-id 204 in library TEKWOLF; loading in drive to read label. 03/27/01 13:56:55 ANR8788W Unable to read the barcode of cartridge in slot-id 210 in library TEKWOLF; loading in drive to read label. 03/27/01 13:56:56 ANR8300E I/O error on library TEKWOLF (OP=6C03, CC=301, KEY=05, ASC=30, ASCQ=00, SENSE=70.00.05.00.00.00- .00.0C.00.00.00.00.30.00.00.00.00.00.00.00., Description- =Cartridge load failure). Refer to Appendix B in the 'Messages' manual for recommended action. 03/27/01 13:56:59 ANR8460E AUDIT LIBRARY process for library TEKWOLF failed. 03/27/01 13:56:59 ANR0985I Process 302 for AUDIT LIBRARY running in the BACKGROUND completed with completion state FAILURE at 13:56:59. SO I looked up which volumes were in the element slot numbers and TRIED to check them out and got this: ANR2017I Administrator ADMIN issued command: CHECKOUT LIBVOLUME TEKWOLF 000224 CHECKLABEL=YES FORCE=NO REMOVE=YES ANR0984I Process 307 for CHECKOUT LIBVOLUME started in the BACKGROUND at 09:07:04. ANR8434I CHECKOUT LIBVOLUME: Operation for volume 000224 in library TEKWOLF started as process 307. ANR0609I CHECKOUT LIBVOLUME started as process 307. ANR8300E I/O error on library TEKWOLF (OP=6C03, CC=314, KEY=05, ASC=3B, ASCQ=0E, SENSE=70.00.05.00.00.00.00.0C.00.00.00.00.3B.0E.00.00.00.00.00.00., Description=The source slot or drive was empty in an attempt to move a volume). Refer to Appendix B in the 'Messages' manual for recommended action. So... I decided to check out the volumes WITHOUT checking the Label: ANR2017I Administrator ADMIN issued command: CHECKOUT LIBVOLUME TEKWOLF 000378 CHECKLABEL=NO FORCE=NO REMOVE=YES ANR0984I Process 315 for CHECKOUT LIBVOLUME started in the BACKGROUND at 09:26:09. ANR8434I CHECKOUT LIBVOLUME: Operation for volume 000378 in library TEKWOLF started as process 315. ANR0609I CHECKOUT LIBVOLUME started as process 315. ANRD mmsscsi.c(9067): Could not move volume 000378 from slot 204 to slot 1010. ANR8827E No Entry/Exit port is available on library TEKWOLF. ANR8307I 083: Remove ECARTRIDGE volume 000378 from slot with element number 204 of library TEKWOLF; issue 'REPLY' along with the request ID when ready. ANR2017I Administrator ADMIN issued command: REPL 83 ANR8499I Command accepted. ANR8438I CHECKOUT LIBVOLUME for vo
Re: audit library STILL unsuccessful!
If you cannot locate the volume and manually put it into the slot (which I had to do for a couple that were in the wrong slot), you will need to use FORCE=YES (which I also had to use). Luckily the ones I could not locate were scratch volumes. Roger C Cook RCG Information Services -Original Message- From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED]]On Behalf Of Marc Levitan Sent: Wednesday, March 28, 2001 10:48 AM To: [EMAIL PROTECTED] Subject: audit library STILL unsuccessful! I have made progress though... the original issue is at the bottom. I ran a audit library Tekwolf checklabel=barcode and this is what I got... 03/27/01 13:56:42 ANR2017I Administrator ADMIN issued command: AUDIT LIBRARY tekwolf checkl=barcode 03/27/01 13:56:42 ANR0984I Process 302 for AUDIT LIBRARY started in the BACKGROUND at 13:56:42. 03/27/01 13:56:42 ANR8457I AUDIT LIBRARY: Operation for library TEKWOLF started as process 302. 03/27/01 13:56:53 ANR8788W Unable to read the barcode of cartridge in slot-id 47 in library TEKWOLF; loading in drive to read label. 03/27/01 13:56:53 ANR8788W Unable to read the barcode of cartridge in slot-id 184 in library TEKWOLF; loading in drive to read label. 03/27/01 13:56:53 ANR8788W Unable to read the barcode of cartridge in slot-id 197 in library TEKWOLF; loading in drive to read label. 03/27/01 13:56:55 ANR8788W Unable to read the barcode of cartridge in slot-id 204 in library TEKWOLF; loading in drive to read label. 03/27/01 13:56:55 ANR8788W Unable to read the barcode of cartridge in slot-id 210 in library TEKWOLF; loading in drive to read label. 03/27/01 13:56:56 ANR8300E I/O error on library TEKWOLF (OP=6C03, CC=301, KEY=05, ASC=30, ASCQ=00, SENSE=70.00.05.00.00.00- .00.0C.00.00.00.00.30.00.00.00.00.00.00.00., Description- =Cartridge load failure). Refer to Appendix B in the 'Messages' manual for recommended action. 03/27/01 13:56:59 ANR8460E AUDIT LIBRARY process for library TEKWOLF failed. 03/27/01 13:56:59 ANR0985I Process 302 for AUDIT LIBRARY running in the BACKGROUND completed with completion state FAILURE at 13:56:59. SO I looked up which volumes were in the element slot numbers and TRIED to check them out and got this: ANR2017I Administrator ADMIN issued command: CHECKOUT LIBVOLUME TEKWOLF 000224 CHECKLABEL=YES FORCE=NO REMOVE=YES ANR0984I Process 307 for CHECKOUT LIBVOLUME started in the BACKGROUND at 09:07:04. ANR8434I CHECKOUT LIBVOLUME: Operation for volume 000224 in library TEKWOLF started as process 307. ANR0609I CHECKOUT LIBVOLUME started as process 307. ANR8300E I/O error on library TEKWOLF (OP=6C03, CC=314, KEY=05, ASC=3B, ASCQ=0E, SENSE=70.00.05.00.00.00.00.0C.00.00.00.00.3B.0E.00.00.00.00.00.00., Description=The source slot or drive was empty in an attempt to move a volume). Refer to Appendix B in the 'Messages' manual for recommended action. So... I decided to check out the volumes WITHOUT checking the Label: ANR2017I Administrator ADMIN issued command: CHECKOUT LIBVOLUME TEKWOLF 000378 CHECKLABEL=NO FORCE=NO REMOVE=YES ANR0984I Process 315 for CHECKOUT LIBVOLUME started in the BACKGROUND at 09:26:09. ANR8434I CHECKOUT LIBVOLUME: Operation for volume 000378 in library TEKWOLF started as process 315. ANR0609I CHECKOUT LIBVOLUME started as process 315. ANRD mmsscsi.c(9067): Could not move volume 000378 from slot 204 to slot 1010. ANR8827E No Entry/Exit port is available on library TEKWOLF. ANR8307I 083: Remove ECARTRIDGE volume 000378 from slot with element number 204 of library TEKWOLF; issue 'REPLY' along with the request ID when ready. ANR2017I Administrator ADMIN issued command: REPL 83 ANR8499I Command accepted. ANR8438I CHECKOUT LIBVOLUME for volume 000378 in library TEKWOLF completed successfully. ANR0985I Process 315 for CHECKOUT LIBVOLUME running in the BACKGROUND completed This was SUCCESSFUL!!! Now I re-ran the Audit Library Tekwolf checklabel=barcode and received an error: 03/27/01 13:56:55 ANR8788W Unable to read the barcode of cartridge in slot-id 210 in library TEKWOLF; loading in drive to read label. 03/27/01 13:56:56 ANR8300E I/O error on library TEKWOLF (OP=6C03, CC=301, KEY=05, ASC=30, ASCQ=00, SENSE=70.00.05.00.00.00- .00.0C.00.00.00.00.30.00.00.00.00.00.00.00., Description- =Cartridge load failure). Refer to Appendix B in the 'Messages' manual for recommended action. 03/27/01 13:56:5
Re: audit library STILL unsuccessful!
In our library each slot has an barcode-label indicating that it is empty. If it contains a cartridge, it is covered and the barcode-reader sees only the label of the cartridge. Is the label of the empty slot intact in your library? Is it intact for the previous and next slot? Does it help to put a intact cartridge there? No more ideas; good luck! Marc Levitan schrieb: > > I have made progress though... the original issue is at the bottom. > > I ran a audit library Tekwolf checklabel=barcode and this is what I got... > > 03/27/01 13:56:42 ANR2017I Administrator ADMIN issued command: AUDIT > LIBRARY >tekwolf checkl=barcode > 03/27/01 13:56:42 ANR0984I Process 302 for AUDIT LIBRARY started in the >BACKGROUND at 13:56:42. > 03/27/01 13:56:42 ANR8457I AUDIT LIBRARY: Operation for library TEKWOLF >started as process 302. > 03/27/01 13:56:53 ANR8788W Unable to read the barcode of cartridge in >slot-id 47 in library TEKWOLF; loading in drive to > read >label. > 03/27/01 13:56:53 ANR8788W Unable to read the barcode of cartridge in >slot-id 184 in library TEKWOLF; loading in drive to > read >label. > 03/27/01 13:56:53 ANR8788W Unable to read the barcode of cartridge in >slot-id 197 in library TEKWOLF; loading in drive to > read >label. > 03/27/01 13:56:55 ANR8788W Unable to read the barcode of cartridge in >slot-id 204 in library TEKWOLF; loading in drive to > read >label. > 03/27/01 13:56:55 ANR8788W Unable to read the barcode of cartridge in >slot-id 210 in library TEKWOLF; loading in drive to > read >label. > 03/27/01 13:56:56 ANR8300E I/O error on library TEKWOLF (OP=6C03, >CC=301, KEY=05, ASC=30, ASCQ=00, > SENSE=70.00.05.00.00.00- >.00.0C.00.00.00.00.30.00.00.00.00.00.00.00., > Description- >=Cartridge load failure). Refer to Appendix B in > the >'Messages' manual for recommended action. > 03/27/01 13:56:59 ANR8460E AUDIT LIBRARY process for library TEKWOLF > failed. > 03/27/01 13:56:59 ANR0985I Process 302 for AUDIT LIBRARY running in the >BACKGROUND completed with completion state FAILURE > at >13:56:59. > SO I looked up which volumes were in the element slot numbers and TRIED to > check them out and got this: > > ANR2017I Administrator ADMIN issued command: CHECKOUT LIBVOLUME TEKWOLF > 000224 > CHECKLABEL=YES FORCE=NO REMOVE=YES > ANR0984I Process 307 for CHECKOUT LIBVOLUME started in the BACKGROUND at > 09:07:04. > ANR8434I CHECKOUT LIBVOLUME: Operation for volume 000224 in library TEKWOLF > started as process 307. > ANR0609I CHECKOUT LIBVOLUME started as process 307. > ANR8300E I/O error on library TEKWOLF (OP=6C03, CC=314, KEY=05, ASC=3B, > ASCQ=0E, > SENSE=70.00.05.00.00.00.00.0C.00.00.00.00.3B.0E.00.00.00.00.00.00., > Description=The source slot or drive was empty in an attempt to move a > volume). > Refer to Appendix B in the 'Messages' manual for recommended action. > > So... I decided to check out the volumes WITHOUT checking the Label: > > ANR2017I Administrator ADMIN issued command: CHECKOUT LIBVOLUME TEKWOLF > 000378 > CHECKLABEL=NO FORCE=NO REMOVE=YES > ANR0984I Process 315 for CHECKOUT LIBVOLUME started in the BACKGROUND at > 09:26:09. > ANR8434I CHECKOUT LIBVOLUME: Operation for volume 000378 in library TEKWOLF > started as process 315. > ANR0609I CHECKOUT LIBVOLUME started as process 315. > ANRD mmsscsi.c(9067): Could not move volume 000378 from slot 204 to > slot > 1010. > ANR8827E No Entry/Exit port is available on library TEKWOLF. > ANR8307I 083: Remove ECARTRIDGE volume 000378 from slot with element number > 204 > of library TEKWOLF; issue 'REPLY' along with the request ID when ready. > ANR2017I Administrator ADMIN issued command: REPL 83 > ANR8499I Command accepted. > ANR8438I CHECKOUT LIBVOLUME for volume 000378 in library TEKWOLF completed > successfully. > ANR0985I Process 315 for CHECKOUT LIBVOLUME running in the BACKGROUND > completed > > This was SUCCESSFUL!!! > > Now I re-ran the Audit Library Tekwolf checklabel=barcode and received an > error: > 03/27/01 13:56:55 ANR8788W Unable to read the barcode of cartridge in >slot-id 210 in library TEKWOLF; loading in drive to > read >label. > 03/27/01 13:56:56 ANR8300E I/O error on library TEKWOLF (OP=6C03, >CC=301, KEY=05, ASC=30, ASCQ=00, > SENSE=70.00.05.00.00.00- >.00.0C.00.00.00.00.30.00.00.00.00.00.00.00., > Description- >=Cartridge load failure). Refer to Appendix B in > the >
Re: audit library STILL unsuccessful!
Hi Marc I have seen this before I know how to resolve it, not the easiest thing to but will work. 1 Delete the drives from the library 2 Delete the Library 3 Recreate the library definition 4 Recreate the drives 5 Label Libv using overwrite=no 6 Checkin all Scratch volumes using search=yes 7 Checkin all Private volumes using search=yes This will work unless there is a fault with the library and/or the SCSI card. Regards Alex Marc Levitan cc: Sent by: Subject: audit library STILL unsuccessful! "ADSM: Dist Stor Manager" <[EMAIL PROTECTED] RIST.EDU> 28/03/2001 16:48 Please respond to "ADSM: Dist Stor Manager" I have made progress though... the original issue is at the bottom. I ran a audit library Tekwolf checklabel=barcode and this is what I got... 03/27/01 13:56:42 ANR2017I Administrator ADMIN issued command: AUDIT LIBRARY tekwolf checkl=barcode 03/27/01 13:56:42 ANR0984I Process 302 for AUDIT LIBRARY started in the BACKGROUND at 13:56:42. 03/27/01 13:56:42 ANR8457I AUDIT LIBRARY: Operation for library TEKWOLF started as process 302. 03/27/01 13:56:53 ANR8788W Unable to read the barcode of cartridge in slot-id 47 in library TEKWOLF; loading in drive to read label. 03/27/01 13:56:53 ANR8788W Unable to read the barcode of cartridge in slot-id 184 in library TEKWOLF; loading in drive to read label. 03/27/01 13:56:53 ANR8788W Unable to read the barcode of cartridge in slot-id 197 in library TEKWOLF; loading in drive to read label. 03/27/01 13:56:55 ANR8788W Unable to read the barcode of cartridge in slot-id 204 in library TEKWOLF; loading in drive to read label. 03/27/01 13:56:55 ANR8788W Unable to read the barcode of cartridge in slot-id 210 in library TEKWOLF; loading in drive to read label. 03/27/01 13:56:56 ANR8300E I/O error on library TEKWOLF (OP=6C03, CC=301, KEY=05, ASC=30, ASCQ=00, SENSE=70.00.05.00.00.00- .00.0C.00.00.00.00.30.00.00.00.00.00.00.00., Description- =Cartridge load failure). Refer to Appendix B in the 'Messages' manual for recommended action. 03/27/01 13:56:59 ANR8460E AUDIT LIBRARY process for library TEKWOLF failed. 03/27/01 13:56:59 ANR0985I Process 302 for AUDIT LIBRARY running in the BACKGROUND completed with completion state FAILURE at 13:56:59. SO I looked up which volumes were in the element slot numbers and TRIED to check them out and got this: ANR2017I Administrator ADMIN issued command: CHECKOUT LIBVOLUME TEKWOLF 000224 CHECKLABEL=YES FORCE=NO REMOVE=YES ANR0984I Process 307 for CHECKOUT LIBVOLUME started in the BACKGROUND at 09:07:04. ANR8434I CHECKOUT LIBVOLUME: Operation for volume 000224 in library TEKWOLF started as process 307. ANR0609I CHECKOUT LIBVOLUME started as process 307. ANR8300E I/O error on library TEKWOLF (OP=6C03, CC=314, KEY=05, ASC=3B, ASCQ=0E, SENSE=70.00.05.00.00.00.00.0C.00.00.00.00.3B.0E.00.00.00.00.00.00., Description=The source slot or drive was empty in an attempt to move a volume). Refer to Appendix B in the 'Messages' manual for recommended action. So... I decided to check out the volumes WITHOUT checking the Label: ANR2017I Administrator ADMIN issued command: CHECKOUT LIBVOLUME TEKWOLF 000378 CHECKLABEL=NO FORCE=NO REMOVE=YES ANR0984I Process 315 for CHECKOUT LIBVOLUME started in the BACKGROUND at 09:26:09. ANR8434I CHECKOUT LIBVOLUME: Operation for volume 000378 in library TEKWOLF started as process 315. ANR0609I CHECKOUT LIBVOLUME started as process 315. ANRD mmsscsi.c(9067): Could not move volume 000378 from slot 204 to slot 1010. ANR8827E No Entry/Exit port is available on library TEKWOLF. ANR8307I 083: Remove ECARTRIDGE volume 000378 from slot with element number 204 of library TEKWOLF; issue 'REPLY' along with the request ID when ready. ANR2017I Administrator ADMIN issued command: REPL 83 ANR8499I Command accepted. ANR8438I CHECKOUT LIBVOLUME for volume 000378 in library TEKWOLF completed successfully. ANR0985I Process 315 for CHECKOUT LIBVOLUME running in the BACKGROUND completed This was SUCCESSFUL!!! Now I re-ran the Audit Library Tekwolf checklabel=barcode and received an error: 03/27/01 13:56:55 ANR8788W Unable to read the barcode of cartridge in slot-id 210 in library TEKWOLF; loading in drive to read