A couple of things, to start with...
You will probably need to have the kernel compiled with the necessary
drivers to access the library. Check the docs. It should be one of the
spt, schgr, sctl drivers that you mention. Look in your /stand/system
file, or use sam.
The standard HP-UX device file to access the library will be under
/dev/rac/cXdYt0, where X and Y are determined by what controller/SCSI
address you are using to access the library.
Have you installed the necessary drivers from:
ftp://index.storsys.ibm.com/devdrvr/HPUX/ ?
Start with these, and see what that gets you.
-Lloyd
Francisco Molero wrote:
>
> Hi colleagues,
> Merry Christmas for everybody.
> I have just installed the TSM server version 4.1 in
> HP-UX. I have not too much knowledge in HP-UX, this is
> important. I have a HP Surestore 6/60 connected by
> fiber with the HP machine and when I try to define the
> library I got :ANR8310E an I/O error occurred while
> accessing library lib_name.The command that I used is
> :
> define library lib_name libt=scsi device=/dev/rmt/0m
> I have several questions because I'm not sure if I can
> do that.
> The first one is :
> I have only install the TIVsm software, and I cannot
> identify if the advance device support and the drivers
> for fiber are installed. Somebody can help me??
> The second one is:
> In the chapter 4 in the Administration Guide for
> HP-UX. You can found a headline which speaks about "
> Cofiguring Device Driver for Automated libraries".
> Here speaks about spt, sctl and schgr SCSI
> pass-through device drivers. who can help me about
> this?. In addition how can I create the
> /dev/tsm/library special file?
> .
> Merry Christams again, and Thank you in advance.
> .
> Regards , Fran
>
> __
> Do You Yahoo!?
> Yahoo! Shopping - Thousands of Stores. Millions of Products.
> http://shopping.yahoo.com/
--
-
Lloyd Dieter- Senior Technology Consultant
Synergy, Inc. http://www.synergyinc.cc [EMAIL PROTECTED]
Main:716-389-1260fax:716-389-1267
-
