Re: [AFMUG] Fw: OT science Saturday

[Forrest Christian (List Account)]

Since Jaime reminded me about this thread

My favorite application for canned Tamales is to dump the can in a pot,
then dump a can of whole kernel corn over the top of that.   The juices mix
together making rather flavorful corn and mellows out the tamales as well.

Now if I could just figure out how to make a good quality bean and cheese
burrito filling which was as yummy as a Lynn Wilson frozen burrito.  so
far all attempts have been either 'bland' or 'oddly seasoned'.   I guess
'not correct texture/consistency' also is common with my attempts.   So I
keep buying the frozen ones from the store when I can get them (the non
Lynn Wilson ones are usually crap).

On Sat, Jan 19, 2019 at 11:51 AM Chuck McCown  wrote:

> Edits:
>
>
> Taste test. Nalley won.
> Better corn flavor in the wrapper.
> Hormel's  had a slight slimy mouth feel.
> Filling was pretty much the same in both.
>
> Both sauces were good. Hormel had more sauce which was good. I would eat
> either if hungry. Nally over Hormel.
>
> Jaime's wife's over them all.
>
> My wife makes a good homemade tamale but cannot compare to Jaime's wife.
> She will not eat these canned tamales.  I have one son that will.
>
> Just like spam and vienna sausages, there are lots of options for me that
> others pass up.  Pickeled beets, sauerkraut, fruit cake, mince meat,
> gooseberry and rhubarb pie.
>
> I ate a cricket yesterday.  Mayra the lady that actually makes all our PCB
> products brought in a packet of crickets.  I presume they were deep fried.
> Had the texture of a cheese puff and the taste of very salty sun flower
> seeds.  She did not want to try one with me.  She finally did.  In a
> starvation situation those would be a good snack.
>
> Not Sent from my iPhone
> --
> AF mailing list
> AF@af.afmug.com
> http://af.afmug.com/mailman/listinfo/af_af.afmug.com
>


-- 
- Forrest
-- 
AF mailing list
AF@af.afmug.com
http://af.afmug.com/mailman/listinfo/af_af.afmug.com

Re: [AFMUG] OT science Saturday

[Ken Hohhof]

Some website had a picture of what looked like bacon wrapped cream cheese 
filled jalapenos as a Super Bowl snack.  Those would be low carb, right?

 

 

From: AF  On Behalf Of Chuck McCown
Sent: Tuesday, January 22, 2019 8:35 PM
To: AnimalFarm Microwave Users Group 
Subject: Re: [AFMUG] OT science Saturday

 

Pozole for me tonight.  Low carb but still - Yum.  

 

From: Jaime Solorza 

Sent: Tuesday, January 22, 2019 5:06 PM

To: AnimalFarm Microwave Users Group 

Subject: Re: [AFMUG] OT science Saturday

 

Yes...un tamal

 

On Sat, Jan 19, 2019, 2:30 PM Ken Hohhof mailto:af-boun...@af.afmug.com> > On Behalf 
Of Jaime Solorza
Sent: Saturday, January 19, 2019 3:07 PM
To: AnimalFarm Microwave Users Group mailto:af@af.afmug.com> >
Subject: Re: [AFMUG] OT science Saturday

 

Tamales in a can?...

A no.

Will ask wife when her next batch is plannednone this Christmas...we 
traveled so no home made this time.  

 

On Sat, Jan 19, 2019, 11:45 AM Chuck McCown mailto:AF@af.afmug.com> 
http://af.afmug.com/mailman/listinfo/af_af.afmug.com

-- 
AF mailing list
AF@af.afmug.com  
http://af.afmug.com/mailman/listinfo/af_af.afmug.com

  _  

-- 
AF mailing list
AF@af.afmug.com  
http://af.afmug.com/mailman/listinfo/af_af.afmug.com

-- 
AF mailing list
AF@af.afmug.com
http://af.afmug.com/mailman/listinfo/af_af.afmug.com

Re: [AFMUG] OT science Saturday

[Chuck McCown]

Pozole for me tonight.  Low carb but still - Yum.  

From: Jaime Solorza 
Sent: Tuesday, January 22, 2019 5:06 PM
To: AnimalFarm Microwave Users Group 
Subject: Re: [AFMUG] OT science Saturday

Yes...un tamal

On Sat, Jan 19, 2019, 2:30 PM Ken Hohhof  On Behalf Of Jaime Solorza
  Sent: Saturday, January 19, 2019 3:07 PM
  To: AnimalFarm Microwave Users Group 
  Subject: Re: [AFMUG] OT science Saturday



  Tamales in a can?...

  A no.

  Will ask wife when her next batch is plannednone this Christmas...we 
traveled so no home made this time.  



  On Sat, Jan 19, 2019, 11:45 AM Chuck McCown http://af.afmug.com/mailman/listinfo/af_af.afmug.com

  -- 
  AF mailing list
  AF@af.afmug.com
  http://af.afmug.com/mailman/listinfo/af_af.afmug.com




-- 
AF mailing list
AF@af.afmug.com
http://af.afmug.com/mailman/listinfo/af_af.afmug.com
-- 
AF mailing list
AF@af.afmug.com
http://af.afmug.com/mailman/listinfo/af_af.afmug.com

Re: [AFMUG] OT science Saturday

[Jaime Solorza]

Yes...un tamal

On Sat, Jan 19, 2019, 2:30 PM Ken Hohhof  So Jaime, am I right that the singular of tamales is tamal?
>
>
>
> I’m just being prepared in case Chuck claims his wife is a hot tamale.
> Earlier he claimed she was smoking.
>
>
>
> *From:* AF  *On Behalf Of *Jaime Solorza
> *Sent:* Saturday, January 19, 2019 3:07 PM
> *To:* AnimalFarm Microwave Users Group 
> *Subject:* Re: [AFMUG] OT science Saturday
>
>
>
> Tamales in a can?...
>
> A no.
>
> Will ask wife when her next batch is plannednone this Christmas...we
> traveled so no home made this time.
>
>
>
> On Sat, Jan 19, 2019, 11:45 AM Chuck McCown 
>
>
>
>
>
>
> Taste test. Nalley won. Better corn flavor in the wrapper. Horseless had a
> slight slimy mouth feel. Both sauces were good. Hormel had more sauce which
> was good. I would eat either if hungry. Nally over Hormel. Jaime’s wife’s
> over them all.
> Sent from my iPhone--
> AF mailing list
> AF@af.afmug.com
> http://af.afmug.com/mailman/listinfo/af_af.afmug.com
>
> --
> AF mailing list
> AF@af.afmug.com
> http://af.afmug.com/mailman/listinfo/af_af.afmug.com
>
-- 
AF mailing list
AF@af.afmug.com
http://af.afmug.com/mailman/listinfo/af_af.afmug.com

Re: [AFMUG] SCADA porn

[Nate Burke]

A lot of the farmers around us do that for their driers/augers.   A big 
box of equipment is installed, and the motors run smoother and quieter.


On 1/22/2019 1:31 PM, Lewis Bergman wrote:
Interesting. I think a freind of mine that owns a cotton gin did the 
same and supposedly saved a bunch. He really didin't know enough to 
explain what they actually installed or were supposed to do but I bet 
that was it. Lots of 3 phase stuff in a cotton gin. Big motors. I 
thought he said they were big caps but I can't imagine them being big 
enough for those kind of loads. They would be huge.


On Sat, Jan 19, 2019 at 3:13 PM > wrote:


I ran into one production facility that was out of power in an
industrial area of town.  The power company could not easily
upgrade them for less than a huge fortune.
A local company came in and did some harmonic filter magic and now
there was more power available for more machines.
I think it also helped their power bill.
*From:* Jaime Solorza
*Sent:* Saturday, January 19, 2019 1:58 PM
*To:* AnimalFarm Microwave Users Group
*Subject:* Re: [AFMUG] SCADA porn
Ha... client is El Paso Electric at Newman power plant...I doubt
they really care...these are for the ponds between plant and
largest solar farm in area..the ponds are designed to keep the
water from seeping into ground water.
On Sat, Jan 19, 2019, 4:26 AM Lewis Bergman
 wrote:

A Google search comes up with a device from Legend Power
Systems that is basically a step down transformer,
claiming that by reducing the AC voltage you will save
power.  That sounds like B.S. to me, unless all your loads
are incandescent light bulbs.

*From:* AF  *On Behalf Of *Jaime
Solorza
*Sent:* Tuesday, January 15, 2019 1:47 PM
*To:* AnimalFarm Microwave Users Group 
*Subject:* Re: [AFMUG] SCADA porn

Yes...keeps power clean...

On Tue, Jan 15, 2019, 12:32 PM -- 
AF mailing list

AF@af.afmug.com
http://af.afmug.com/mailman/listinfo/af_af.afmug.com

-- 

-- 


AF mailing list
AF@af.afmug.com
http://af.afmug.com/mailman/listinfo/af_af.afmug.com




-- 
AF mailing list

AF@af.afmug.com
http://af.afmug.com/mailman/listinfo/af_af.afmug.com

-- 
AF mailing list

AF@af.afmug.com
http://af.afmug.com/mailman/listinfo/af_af.afmug.com

-- 
AF mailing list

AF@af.afmug.com
http://af.afmug.com/mailman/listinfo/af_af.afmug.com

-- 
AF mailing list

AF@af.afmug.com
http://af.afmug.com/mailman/listinfo/af_af.afmug.com


-- 
AF mailing list

AF@af.afmug.com 
http://af.afmug.com/mailman/listinfo/af_af.afmug.com
-- 
AF mailing list

AF@af.afmug.com 
http://af.afmug.com/mailman/listinfo/af_af.afmug.com





-- 
AF mailing list
AF@af.afmug.com
http://af.afmug.com/mailman/listinfo/af_af.afmug.com

Re: [AFMUG] SCADA porn

[Lewis Bergman]

Interesting. I think a freind of mine that owns a cotton gin did the same
and supposedly saved a bunch. He really didin't know enough to explain what
they actually installed or were supposed to do but I bet that was it. Lots
of 3 phase stuff in a cotton gin. Big motors. I thought he said they were
big caps but I can't imagine them being big enough for those kind of loads.
They would be huge.

On Sat, Jan 19, 2019 at 3:13 PM  wrote:

> I ran into one production facility that was out of power in an industrial
> area of town.  The power company could not easily upgrade them for less
> than a huge fortune.
> A local company came in and did some harmonic filter magic and now there
> was more power available for more machines.
> I think it also helped their power bill.
>
> *From:* Jaime Solorza
> *Sent:* Saturday, January 19, 2019 1:58 PM
> *To:* AnimalFarm Microwave Users Group
> *Subject:* Re: [AFMUG] SCADA porn
> Ha... client is El Paso Electric at Newman power plant...I doubt they
> really care...these are for the ponds between plant and largest solar farm
> in area..the ponds are designed to keep the water from seeping into ground
> water.
>
> On Sat, Jan 19, 2019, 4:26 AM Lewis Bergman  wrote:
>
>> I agree. Cleaning up power I can understand but facing money? You are
>> paying for watts so you are just losing money on the inefficiency of the
>> transformer.
>>
>> On Tue, Jan 15, 2019, 5:12 PM Ken Hohhof  wrote:
>>
>>> A Google search comes up with a device from Legend Power Systems that is
>>> basically a step down transformer, claiming that by reducing the AC voltage
>>> you will save power.  That sounds like B.S. to me, unless all your loads
>>> are incandescent light bulbs.
>>>
>>>
>>>
>>> *From:* AF  *On Behalf Of *Jaime Solorza
>>> *Sent:* Tuesday, January 15, 2019 1:47 PM
>>> *To:* AnimalFarm Microwave Users Group 
>>> *Subject:* Re: [AFMUG] SCADA porn
>>>
>>>
>>>
>>> Yes...keeps power clean...
>>>
>>>
>>>
>>> On Tue, Jan 15, 2019, 12:32 PM >>
>>> What does a harmonizer do?  Cut down on harmonics?  I know that in some
>>> situation harmonics can cause a power factor type of problem to the power
>>> company.
>>>
>>>
>>>
>>> *From:* Jaime Solorza
>>>
>>> *Sent:* Tuesday, January 15, 2019 12:27 PM
>>>
>>> *To:* AnimalFarm Microwave Users Group
>>>
>>> *Subject:* Re: [AFMUG] SCADA porn
>>>
>>>
>>>
>>> Yes...outer seal is bonded to ground inside pipefirst time we have
>>> done it this way...this enclosure has compenents we have never installed
>>> before like a harmonizer.
>>>
>>>
>>>
>>> On Tue, Jan 15, 2019, 7:09 AM dave >>
>>> what is that ground for?? Looks like a ground to an outer seal of some
>>> sort.
>>>
>>>
>>>
>>> On 1/14/19 8:36 PM, Jaime Solorza wrote:
>>>
>>> Thanks.  First time using the new Phoenix Contact managed switch...will
>>> share experience once we get things going... Some extra grounding was
>>> called for as per engineers...
>>>
>>>
>>>
>>> On Mon, Jan 14, 2019, 4:53 PM David M >>
>>> I finally got a good source for most of the interconnects,din rail and
>>> wire management stuff.
>>>
>>> I always like good clean boxes.. Awesome!
>>>
>>>
>>>
>>> On 1/14/2019 3:41 PM, Jaime Solorza wrote:
>>>
>>> Starting year off busy...
>>>
>>>
>>>
>>> --
>>> AF mailing list
>>> AF@af.afmug.com
>>> http://af.afmug.com/mailman/listinfo/af_af.afmug.com
>>>
>>>
>>>
>>> --
>>>
>>> --
>>>
>>> AF mailing list
>>> AF@af.afmug.com
>>> http://af.afmug.com/mailman/listinfo/af_af.afmug.com
>>>
>>> --
>>>
>>> --
>>> AF mailing list
>>> AF@af.afmug.com
>>> http://af.afmug.com/mailman/listinfo/af_af.afmug.com
>>>
>>> --
>>> AF mailing list
>>> AF@af.afmug.com
>>> http://af.afmug.com/mailman/listinfo/af_af.afmug.com
>>>
>>> --
>>> AF mailing list
>>> AF@af.afmug.com
>>> http://af.afmug.com/mailman/listinfo/af_af.afmug.com
>>>
>> --
>> AF mailing list
>> AF@af.afmug.com
>> http://af.afmug.com/mailman/listinfo/af_af.afmug.com
>>
> --
> --
> AF mailing list
> AF@af.afmug.com
> http://af.afmug.com/mailman/listinfo/af_af.afmug.com
> --
> AF mailing list
> AF@af.afmug.com
> http://af.afmug.com/mailman/listinfo/af_af.afmug.com
>
-- 
AF mailing list
AF@af.afmug.com
http://af.afmug.com/mailman/listinfo/af_af.afmug.com

Re: [AFMUG] Pipe

[Craig Schmaderer]

My go to pipe is 2.5” IMC, it has a 2.875 OD.  I get it usually from my 
electrical wholesaler, but if you have a Menards, they will ship to store for 
free.
https://www.menards.com/main/electrical/conduit-conduit-fittings-raceways/conduit/wheatland-tube-company-imc-conduit/3651444/p-146525438.htm

From: AF  on behalf of Jeremy 
Reply-To: AnimalFarm Microwave Users Group 
Date: Tuesday, January 22, 2019 at 11:06 AM
To: AnimalFarm Microwave Users Group 
Subject: Re: [AFMUG] Pipe

Yeah, IMC - my keyboard missed a letter.

On Tue, Jan 22, 2019 at 10:00 AM Jeremy 
mailto:jeremysmi...@gmail.com>> wrote:
You want 3" IC (Intermediate Conduit) - stuff is solid as a rock and usually 
galvanized pretty well also.  You can get a cap for it at the plumbing supply 
store

On Tue, Jan 22, 2019 at 10:02 AM dave via AF 
mailto:af@af.afmug.com>> wrote:

Have you tried an Electrical supply warehouse. I was amazed at some of the pipe 
for mounting and conduit they have.


On 1/22/19 10:31 AM, Matt wrote:

Has anyone found a local source for pipe with OD of around 3.5 inches

heavy enough for mounting larger dishes, etc?  Anything at big chains

to save shipping?


--
[cid:168768041b7ce6e42591]
--
AF mailing list
AF@af.afmug.com
http://af.afmug.com/mailman/listinfo/af_af.afmug.com
-- 
AF mailing list
AF@af.afmug.com
http://af.afmug.com/mailman/listinfo/af_af.afmug.com

[AFMUG] OT - "genius plan" to fund wall with porn tax

[Ken Hohhof]

https://www.azcentral.com/story/opinion/op-ed/laurieroberts/2019/01/18/arizo
na-legislator-offers-genius-plan-fund-border-wall-tax-porn/2619364002/

 

-- 
AF mailing list
AF@af.afmug.com
http://af.afmug.com/mailman/listinfo/af_af.afmug.com

Re: [AFMUG] Pipe

[Jeremy]

Yeah, IMC - my keyboard missed a letter.

On Tue, Jan 22, 2019 at 10:00 AM Jeremy  wrote:

> You want 3" IC (Intermediate Conduit) - stuff is solid as a rock and
> usually galvanized pretty well also.  You can get a cap for it at the
> plumbing supply store
>
> On Tue, Jan 22, 2019 at 10:02 AM dave via AF  wrote:
>
>> Have you tried an Electrical supply warehouse. I was amazed at some of
>> the pipe for mounting and conduit they have.
>>
>>
>> On 1/22/19 10:31 AM, Matt wrote:
>>
>> Has anyone found a local source for pipe with OD of around 3.5 inches
>> heavy enough for mounting larger dishes, etc?  Anything at big chains
>> to save shipping?
>>
>>
>> --
>> --
>> AF mailing list
>> AF@af.afmug.com
>> http://af.afmug.com/mailman/listinfo/af_af.afmug.com
>>
>
-- 
AF mailing list
AF@af.afmug.com
http://af.afmug.com/mailman/listinfo/af_af.afmug.com

Re: [AFMUG] Pipe

[Jeremy]

You want 3" IC (Intermediate Conduit) - stuff is solid as a rock and
usually galvanized pretty well also.  You can get a cap for it at the
plumbing supply store

On Tue, Jan 22, 2019 at 10:02 AM dave via AF  wrote:

> Have you tried an Electrical supply warehouse. I was amazed at some of the
> pipe for mounting and conduit they have.
>
>
> On 1/22/19 10:31 AM, Matt wrote:
>
> Has anyone found a local source for pipe with OD of around 3.5 inches
> heavy enough for mounting larger dishes, etc?  Anything at big chains
> to save shipping?
>
>
> --
> --
> AF mailing list
> AF@af.afmug.com
> http://af.afmug.com/mailman/listinfo/af_af.afmug.com
>
-- 
AF mailing list
AF@af.afmug.com
http://af.afmug.com/mailman/listinfo/af_af.afmug.com

Re: [AFMUG] Pipe

[dave via AF]

Have you tried an Electrical supply warehouse. I was amazed at some of 
the pipe for mounting and conduit they have.



On 1/22/19 10:31 AM, Matt wrote:

Has anyone found a local source for pipe with OD of around 3.5 inches
heavy enough for mounting larger dishes, etc?  Anything at big chains
to save shipping?


--
-- 
AF mailing list
AF@af.afmug.com
http://af.afmug.com/mailman/listinfo/af_af.afmug.com

Re: [AFMUG] Pipe

[Ken Hohhof]

If you have an electrical supply store nearby, they should carry 3" (trade
size) IMC or rigid conduit.  IMC will be considerably lighter and actually
stiffer than rigid.

-Original Message-
From: AF  On Behalf Of Matt
Sent: Tuesday, January 22, 2019 10:32 AM
To: af@af.afmug.com
Subject: [AFMUG] Pipe

Has anyone found a local source for pipe with OD of around 3.5 inches heavy
enough for mounting larger dishes, etc?  Anything at big chains to save
shipping?

--
AF mailing list
AF@af.afmug.com
http://af.afmug.com/mailman/listinfo/af_af.afmug.com



-- 
AF mailing list
AF@af.afmug.com
http://af.afmug.com/mailman/listinfo/af_af.afmug.com

Re: [AFMUG] Pipe

[Jesse DuPont]

  
  
A local fencing supply place here has galvanized up to 8" in lengths
up to 20'. It's probably not quite as heavy as what you'd buy from
some place like site solutions, but it's still pretty heavy stuff. I
used their 4" for ice bridge posts and it's been solid.
About a year ago, I had ordered some 4" from a tower company and it
ended up taking a long time so I bought the 4" from the fencing
supply place and it was fine. Price wise, it was comparable after
shipping the other stuff.


  
  
  
  
  
  
  Jesse DuPont
  Network Architect
  email: jesse.dup...@celeritycorp.net
  Celerity Networks LLC
  Celerity Broadband LLC
Like us!
  facebook.com/celeritynetworksllc
  
  Like us!
  facebook.com/celeritybroadband
  


On 1/22/19 9:31 AM, Matt wrote:


  Has anyone found a local source for pipe with OD of around 3.5 inches
heavy enough for mounting larger dishes, etc?  Anything at big chains
to save shipping?




  

-- 
AF mailing list
AF@af.afmug.com
http://af.afmug.com/mailman/listinfo/af_af.afmug.com

[AFMUG] Pipe

[Matt]

Has anyone found a local source for pipe with OD of around 3.5 inches
heavy enough for mounting larger dishes, etc?  Anything at big chains
to save shipping?

-- 
AF mailing list
AF@af.afmug.com
http://af.afmug.com/mailman/listinfo/af_af.afmug.com

Re: [AFMUG] YouTube and such

[Ben Royer]

Thanks, that’s a good point about being next to someone, the 450M 3Ghz. was one 
I wanted to really explain the size, so maybe I might want to mention my size 
in future videos, good catch.  Yeah, my lapel mic got chewed on by my new 
dog. I soldered the wires back together as best I could, but may end up 
with a new one.  I also noticed the blurry video, and have a plan in place to 
resolve that next video.  Thanks for all the great feedback.

Thank you,
Ben Royer, Operations Manager
Royell Communications, Inc.
217-965-3699 www.royell.net

From: Andy Trimmell 
Sent: Tuesday, January 22, 2019 9:55 AM
To: AnimalFarm Microwave Users Group 
Subject: Re: [AFMUG] YouTube and such

Looks informative. Your overhead camera is very blurry in comparison to your 
front camera. It might help if you got a big piece of black cloth to put over 
top of your wood table. Should help with the camera focusing on the wood grain 
instead of the peripherals.  A few times your microphone peaked and distorted. 

 

I did like seeing the ePMP 3000 next to a person. It looks huge in comparison 
to the rest of their products.

 

Thanks for making the video!

 

 

Andy Trimmell

Business Manager

PDS Connect

317-831-3000

 

 

 

From: AF [mailto:af-boun...@af.afmug.com] On Behalf Of Ben Royer
Sent: Tuesday, January 22, 2019 10:36 AM
To: AnimalFarm Microwave Users Group
Subject: [AFMUG] YouTube and such

 

So I have some new videos out there of some unboxing of Cambium gear.  I’d love 
to get some feedback, and also be curious if anyone in the industry would like 
to see other types of videos.  One idea I had was starting to document tower 
work and install work for infrastructure to start sharing basic stuff.  Things 
like cadwelding our ground, installing fiber to backhauls, mounting options on 
different structures, etc.  Below is a link to my latest but feel free to check 
out the channel for others.  There is a video of 450M 3Ghz. installed on a 
tower on the channel too.

 

https://youtu.be/rz4qVMHPpHA

 

Thank you,
Ben Royer, Operations Manager
Royell Communications, Inc.
217-965-3699 www.royell.net




-- 
AF mailing list
AF@af.afmug.com
https://linkprotect.cudasvc.com/url?a=http%3a%2f%2faf.afmug.com%2fmailman%2flistinfo%2faf_af.afmug.com=E,1,iPqqgdYJtUHbV_GaEEuC1iCXHsApk84gM5yqiYfwr5OghpFEi4jtgimwmo1JCJ5UM8na5z_5wzjdnv5HlCnNIqgJZjIHzHiC7yiCcvQ6qLb971Ay=1
-- 
AF mailing list
AF@af.afmug.com
http://af.afmug.com/mailman/listinfo/af_af.afmug.com

Re: [AFMUG] YouTube and such

[Ben Royer]

Thanks Jay, yeah my audio has been a real pain lately, but I think I'm 
started to get a feel for balancing a little better.


Thank you,
Ben Royer, Operations Manager
Royell Communications, Inc.
217-965-3699 www.royell.net

-Original Message- 
From: Jay Weekley

Sent: Tuesday, January 22, 2019 9:42 AM
To: AnimalFarm Microwave Users Group
Subject: Re: [AFMUG] YouTube and such

I'm a fan and think they're well done.  The biggest thing is the audio
is a little low though I haven't seen your latest productions.  I'm
interested in the other subjects you listed.

Ben Royer wrote:
So I have some new videos out there of some unboxing of Cambium gear.  I’d 
love to get some feedback, and also be curious if anyone in the industry 
would like to see other types of videos.  One idea I had was starting to 
document tower work and install work for infrastructure to start sharing 
basic stuff.  Things like cadwelding our ground, installing fiber to 
backhauls, mounting options on different structures, etc.  Below is a link 
to my latest but feel free to check out the channel for others.  There is 
a video of 450M 3Ghz. installed on a tower on the channel too.

https://youtu.be/rz4qVMHPpHA
Thank you,
Ben Royer, Operations Manager
Royell Communications, Inc.
217-965-3699 
https://linkprotect.cudasvc.com/url?a=https%3a%2f%2fwww.royell.net=E,1,c-0PvnXGYcBDwDjPZHyXgZKO9GT_es6RYa2nuavOnqGcZXpSRZLN_sEiDMFPZKZObfYQmaYs48L0czTopgMiXO-ITZU1A2r6vcOF3Oo9otwCVigJ75XGmBnm=1





--
*Jay Weekley*
*Cyber Broadband
*

--
AF mailing list
AF@af.afmug.com
https://linkprotect.cudasvc.com/url?a=http%3a%2f%2faf.afmug.com%2fmailman%2flistinfo%2faf_af.afmug.com=E,1,dVkZWZ6eNlDx9K2JHchf3W2w_19WSsX0RT_fh5LX-vuJa3Im_mCPns6dyT1qOI5J8JJUXaljRvhzf2MYukqyP7xqbY80fhH9FOHLiw5XaRqBI3JAKDJ5-ts,=1 



--
AF mailing list
AF@af.afmug.com
http://af.afmug.com/mailman/listinfo/af_af.afmug.com

Re: [AFMUG] YouTube and such

[Andy Trimmell]

Looks informative. Your overhead camera is very blurry in comparison to your 
front camera. It might help if you got a big piece of black cloth to put over 
top of your wood table. Should help with the camera focusing on the wood grain 
instead of the peripherals.  A few times your microphone peaked and distorted. 

 

I did like seeing the ePMP 3000 next to a person. It looks huge in comparison 
to the rest of their products.

 

Thanks for making the video!

 

 

Andy Trimmell

Business Manager

PDS Connect

317-831-3000

 

 

 

From: AF [mailto:af-boun...@af.afmug.com] On Behalf Of Ben Royer
Sent: Tuesday, January 22, 2019 10:36 AM
To: AnimalFarm Microwave Users Group
Subject: [AFMUG] YouTube and such

 

So I have some new videos out there of some unboxing of Cambium gear.  I’d love 
to get some feedback, and also be curious if anyone in the industry would like 
to see other types of videos.  One idea I had was starting to document tower 
work and install work for infrastructure to start sharing basic stuff.  Things 
like cadwelding our ground, installing fiber to backhauls, mounting options on 
different structures, etc.  Below is a link to my latest but feel free to check 
out the channel for others.  There is a video of 450M 3Ghz. installed on a 
tower on the channel too.

 

https://youtu.be/rz4qVMHPpHA

 

Thank you,
Ben Royer, Operations Manager
Royell Communications, Inc.
217-965-3699 www.royell.net

-- 
AF mailing list
AF@af.afmug.com
http://af.afmug.com/mailman/listinfo/af_af.afmug.com

Re: [AFMUG] YouTube and such

[Jay Weekley]

I'm a fan and think they're well done.  The biggest thing is the audio 
is a little low though I haven't seen your latest productions.  I'm 
interested in the other subjects you listed.


Ben Royer wrote:
So I have some new videos out there of some unboxing of Cambium gear.  
I’d love to get some feedback, and also be curious if anyone in the 
industry would like to see other types of videos.  One idea I had was 
starting to document tower work and install work for infrastructure to 
start sharing basic stuff.  Things like cadwelding our ground, 
installing fiber to backhauls, mounting options on different 
structures, etc.  Below is a link to my latest but feel free to check 
out the channel for others.  There is a video of 450M 3Ghz. installed 
on a tower on the channel too.

https://youtu.be/rz4qVMHPpHA
Thank you,
Ben Royer, Operations Manager
Royell Communications, Inc.
217-965-3699 www.royell.net




--
*Jay Weekley*
*Cyber Broadband
*

--
AF mailing list
AF@af.afmug.com
http://af.afmug.com/mailman/listinfo/af_af.afmug.com

[AFMUG] YouTube and such

[Ben Royer]

So I have some new videos out there of some unboxing of Cambium gear.  I’d love 
to get some feedback, and also be curious if anyone in the industry would like 
to see other types of videos.  One idea I had was starting to document tower 
work and install work for infrastructure to start sharing basic stuff.  Things 
like cadwelding our ground, installing fiber to backhauls, mounting options on 
different structures, etc.  Below is a link to my latest but feel free to check 
out the channel for others.  There is a video of 450M 3Ghz. installed on a 
tower on the channel too.

https://youtu.be/rz4qVMHPpHA

Thank you,
Ben Royer, Operations Manager
Royell Communications, Inc.
217-965-3699 www.royell.net-- 
AF mailing list
AF@af.afmug.com
http://af.afmug.com/mailman/listinfo/af_af.afmug.com

[AFMUG] OT Large Hutton auction in Carrolton Tx.

[Jerry Head]

Might be some deals here for you guys with large warehouses.

https://goo.gl/iVJBgH
-- 
AF mailing list
AF@af.afmug.com
http://af.afmug.com/mailman/listinfo/af_af.afmug.com