Re: [AFMUG] RB4011iGS+5HacQ2Hnd
Title: Re: [AFMUG] RB4011iGS+5HacQ2Hnd Joe, I had the baud rate at 9600 and 115200. I'm going to wait for the new cable, being I was just randomly using cables I had on hand. This one is less than 3 months old, so I'm only going to fiddle with it for a bit more and then see about doing a RMA. -- Best regards, Mark mailto:m...@mailmt.com Myakka Technologies, Inc. www.Myakka.com -- Tuesday, June 25, 2019, 4:12:45 PM, you wrote: I've seen the garbled console output when the baud rate doesn't match between clients, I'm not sure of the default setting of the RB4011 though. I am also using the non-wifi version at my house. Very happy with it. It's a workhorse. Another thing I would try is swapping the power supply, if you have a spare one available. On Tue, Jun 25, 2019 at 3:05 PM Mark - Myakka Technologies <m...@mailmt.com> wrote: Ken, Yeah indoors, top shelf, I'm sure the stale air up there gets a bit toasty. May have to invest in a tiny fan to keep the air moving around the new router. -- Best regards, Mark mailto:m...@mailmt.com Myakka Technologies, Inc. www.Myakka.com -- Tuesday, June 25, 2019, 3:59:03 PM, you wrote: KH> Only the non WiFi version. I worry a little about the thermal management KH> compared to something like an 1100AHx4, the packaging is a little ... KH> different. I assume yours is indoors though? KH> -Original Message- KH> From: AF <af-boun...@af.afmug.com> On Behalf Of Mark - Myakka Technologies KH> Sent: Tuesday, June 25, 2019 2:50 PM KH> To: AnimalFarm Microwave Users Group <af@af.afmug.com> KH> Subject: [AFMUG] RB4011iGS+5HacQ2Hnd KH> Is anyone using these? Have you had any issues? I purchased two KH> of these a few months back. KH> They work real nice. However, one of them went south today. Get just the KH> power & SFP+ light. Never get any LAN lights. Tried several things with the KH> reset button with no luck. Tried a few console cables, but just get KH> garbage with one of the cables. Looking at the docs, it looks like it uses KH> the cisco type of cable. Just ordered one that will be here on Friday. KH> Looking like something got scrambled on the boot code. KH> -- KH> Thanks, KH> Mark mailto:m...@mailmt.com KH> Myakka Technologies, Inc. KH> www.Myakka.com KH> -- KH> AF mailing list KH> AF@af.afmug.com KH> http://af.afmug.com/mailman/listinfo/af_af.afmug.com -- AF mailing list AF@af.afmug.com http://af.afmug.com/mailman/listinfo/af_af.afmug.com -- AF mailing list AF@af.afmug.com http://af.afmug.com/mailman/listinfo/af_af.afmug.com
Re: [AFMUG] RB4011iGS+5HacQ2Hnd
115200 by default -- Christopher Tyler MTCRE/MTCNA/MTCTCE/MTCWE Total Highspeed Internet Services 417.851.1107 ext 9002 - Original Message - From: "Joe Novak" To: "AnimalFarm Microwave Users Group" Sent: Tuesday, June 25, 2019 3:12:45 PM Subject: Re: [AFMUG] RB4011iGS+5HacQ2Hnd I've seen the garbled console output when the baud rate doesn't match between clients, I'm not sure of the default setting of the RB4011 though. I am also using the non-wifi version at my house. Very happy with it. It's a workhorse. Another thing I would try is swapping the power supply, if you have a spare one available. On Tue, Jun 25, 2019 at 3:05 PM Mark - Myakka Technologies < m...@mailmt.com > wrote: Ken, Yeah indoors, top shelf, I'm sure the stale air up there gets a bit toasty. May have to invest in a tiny fan to keep the air moving around the new router. -- Best regards, Mark mailto: m...@mailmt.com Myakka Technologies, Inc. www.Myakka.com -- Tuesday, June 25, 2019, 3:59:03 PM, you wrote: KH> Only the non WiFi version. I worry a little about the thermal management KH> compared to something like an 1100AHx4, the packaging is a little ... KH> different. I assume yours is indoors though? KH> -Original Message- KH> From: AF < af-boun...@af.afmug.com > On Behalf Of Mark - Myakka Technologies KH> Sent: Tuesday, June 25, 2019 2:50 PM KH> To: AnimalFarm Microwave Users Group < af@af.afmug.com > KH> Subject: [AFMUG] RB4011iGS+5HacQ2Hnd KH> Is anyone using these? Have you had any issues? I purchased two KH> of these a few months back. KH> They work real nice. However, one of them went south today. Get just the KH> power & SFP+ light. Never get any LAN lights. Tried several things with the KH> reset button with no luck. Tried a few console cables, but just get KH> garbage with one of the cables. Looking at the docs, it looks like it uses KH> the cisco type of cable. Just ordered one that will be here on Friday. KH> Looking like something got scrambled on the boot code. KH> -- KH> Thanks, KH> Mark mailto: m...@mailmt.com KH> Myakka Technologies, Inc. KH> www.Myakka.com KH> -- KH> AF mailing list KH> AF@af.afmug.com KH> http://af.afmug.com/mailman/listinfo/af_af.afmug.com -- AF mailing list AF@af.afmug.com http://af.afmug.com/mailman/listinfo/af_af.afmug.com -- AF mailing list AF@af.afmug.com http://af.afmug.com/mailman/listinfo/af_af.afmug.com -- AF mailing list AF@af.afmug.com http://af.afmug.com/mailman/listinfo/af_af.afmug.com
Re: [AFMUG] RB4011iGS+5HacQ2Hnd
I've seen the garbled console output when the baud rate doesn't match between clients, I'm not sure of the default setting of the RB4011 though. I am also using the non-wifi version at my house. Very happy with it. It's a workhorse. Another thing I would try is swapping the power supply, if you have a spare one available. On Tue, Jun 25, 2019 at 3:05 PM Mark - Myakka Technologies wrote: > Ken, > > Yeah indoors, top shelf, I'm sure the stale air up there gets a bit > toasty. May have to invest in a tiny fan to keep the air moving > around the new router. > > -- > Best regards, > Markmailto:m...@mailmt.com > > Myakka Technologies, Inc. > www.Myakka.com > > -- > > Tuesday, June 25, 2019, 3:59:03 PM, you wrote: > > KH> Only the non WiFi version. I worry a little about the thermal > management > KH> compared to something like an 1100AHx4, the packaging is a little ... > KH> different. I assume yours is indoors though? > > KH> -Original Message- > KH> From: AF On Behalf Of Mark - Myakka > Technologies > KH> Sent: Tuesday, June 25, 2019 2:50 PM > KH> To: AnimalFarm Microwave Users Group > KH> Subject: [AFMUG] RB4011iGS+5HacQ2Hnd > > KH> Is anyone using these? Have you had any issues? I purchased two > KH> of these a few months back. > KH> They work real nice. However, one of them went south today. Get just > the > KH> power & SFP+ light. Never get any LAN lights. Tried several things > with the > KH> reset button with no luck. Tried a few console cables, but just get > KH> garbage with one of the cables. Looking at the docs, it looks like it > uses > KH> the cisco type of cable. Just ordered one that will be here on Friday. > > KH> Looking like something got scrambled on the boot code. > > > KH> -- > > KH> Thanks, > KH> Mark mailto:m...@mailmt.com > > KH> Myakka Technologies, Inc. > KH> www.Myakka.com > > > KH> -- > KH> AF mailing list > KH> AF@af.afmug.com > KH> http://af.afmug.com/mailman/listinfo/af_af.afmug.com > > > > > -- > AF mailing list > AF@af.afmug.com > http://af.afmug.com/mailman/listinfo/af_af.afmug.com > -- AF mailing list AF@af.afmug.com http://af.afmug.com/mailman/listinfo/af_af.afmug.com
Re: [AFMUG] RB4011iGS+5HacQ2Hnd
Ken, Yeah indoors, top shelf, I'm sure the stale air up there gets a bit toasty. May have to invest in a tiny fan to keep the air moving around the new router. -- Best regards, Markmailto:m...@mailmt.com Myakka Technologies, Inc. www.Myakka.com -- Tuesday, June 25, 2019, 3:59:03 PM, you wrote: KH> Only the non WiFi version. I worry a little about the thermal management KH> compared to something like an 1100AHx4, the packaging is a little ... KH> different. I assume yours is indoors though? KH> -Original Message- KH> From: AF On Behalf Of Mark - Myakka Technologies KH> Sent: Tuesday, June 25, 2019 2:50 PM KH> To: AnimalFarm Microwave Users Group KH> Subject: [AFMUG] RB4011iGS+5HacQ2Hnd KH> Is anyone using these? Have you had any issues? I purchased two KH> of these a few months back. KH> They work real nice. However, one of them went south today. Get just the KH> power & SFP+ light. Never get any LAN lights. Tried several things with the KH> reset button with no luck. Tried a few console cables, but just get KH> garbage with one of the cables. Looking at the docs, it looks like it uses KH> the cisco type of cable. Just ordered one that will be here on Friday. KH> Looking like something got scrambled on the boot code. KH> -- KH> Thanks, KH> Mark mailto:m...@mailmt.com KH> Myakka Technologies, Inc. KH> www.Myakka.com KH> -- KH> AF mailing list KH> AF@af.afmug.com KH> http://af.afmug.com/mailman/listinfo/af_af.afmug.com -- AF mailing list AF@af.afmug.com http://af.afmug.com/mailman/listinfo/af_af.afmug.com
Re: [AFMUG] RB4011iGS+5HacQ2Hnd
Only the non WiFi version. I worry a little about the thermal management compared to something like an 1100AHx4, the packaging is a little ... different. I assume yours is indoors though? -Original Message- From: AF On Behalf Of Mark - Myakka Technologies Sent: Tuesday, June 25, 2019 2:50 PM To: AnimalFarm Microwave Users Group Subject: [AFMUG] RB4011iGS+5HacQ2Hnd Is anyone using these? Have you had any issues? I purchased two of these a few months back. They work real nice. However, one of them went south today. Get just the power & SFP+ light. Never get any LAN lights. Tried several things with the reset button with no luck. Tried a few console cables, but just get garbage with one of the cables. Looking at the docs, it looks like it uses the cisco type of cable. Just ordered one that will be here on Friday. Looking like something got scrambled on the boot code. -- Thanks, Mark mailto:m...@mailmt.com Myakka Technologies, Inc. www.Myakka.com -- AF mailing list AF@af.afmug.com http://af.afmug.com/mailman/listinfo/af_af.afmug.com -- AF mailing list AF@af.afmug.com http://af.afmug.com/mailman/listinfo/af_af.afmug.com
[AFMUG] RB4011iGS+5HacQ2Hnd
Is anyone using these? Have you had any issues? I purchased two of these a few months back. They work real nice. However, one of them went south today. Get just the power & SFP+ light. Never get any LAN lights. Tried several things with the reset button with no luck. Tried a few console cables, but just get garbage with one of the cables. Looking at the docs, it looks like it uses the cisco type of cable. Just ordered one that will be here on Friday. Looking like something got scrambled on the boot code. -- Thanks, Mark mailto:m...@mailmt.com Myakka Technologies, Inc. www.Myakka.com -- AF mailing list AF@af.afmug.com http://af.afmug.com/mailman/listinfo/af_af.afmug.com
