Re: [AFMUG] crowdsource troubleshooting

[Jacob Turner]

The Prism Gen 2 uses "standard" UBNT passive 24v POE.  +4,5 -7,8.  I've
seen netonix switches claiming as much as 12 watts draw from one when
running.  I wouldn't be surprised if their startup draw may be a bit higher.

On Tue, May 8, 2018 at 8:16 AM,  wrote:

> I need help in understanding a product failure.
>
> I have now had two customers with similar failures in my POE fuse
> product.  The fuses are blowing.
> So far it is limited to the fuses on pins 4/5.
>
> One customer is using:
> UBNT 5AC Prism Gen 2 radio, Mikrotik 411 boards, using both poes and
> netonix as the power supply.
>
> What pins and polarities does that radio use for POE?  How much current?
>
> I may need higher rated fuses or slower fuses.  But I can only go so high
> before it is not protecting Netonix thus becoming an expensive CAT5
> splice.
>
> My ideas so far:
>
> I need a slower reacting fuse.
>
> I need a higher amp rating fuse.  (not sure how high I can go and still
> protect Netonix)
>
> Some loads have unanticipated currents on those wires.
>
> Plugging in when powered may cause a connection sequence problem where if
> pin 4 makes contact first the whole load will go through that wire and blow
> that fuse.
>
>

Re: [AFMUG] Lacp/lag Netonix to edgeswitch

[Jacob Turner]

This works for me


​

On Fri, Jan 12, 2018 at 1:55 PM, TJ Trout  wrote:

> Hello ,
>
> Anyone with a working configuration of lacp or lag between a matonix and
> edgeswitch that could send over a screenshot of the configuration of each
> device if you have it working?
>
> Having a little bit of trouble and would like a starting point before I go
> back to the lab.
>
> Thanks
>
> TJ
>

Re: [AFMUG] Is POE out settings on new powerbox pro different?

[Jacob Turner]

Sounds like you may not have enough current to power on all of the prisms.
You certainly want a 24v 2.5A power supply at least.  You also may have to
use the barrel plug instead of POE in to get enough juice.

On Thu, Jul 6, 2017 at 9:59 PM, Tim Reichhart <
timreichh...@hometowncable.net> wrote:

>
> See ethernet1 doesn't have option for poe out only poe in so ports 2-5
> have option for poe but it only works when you force it on. Because I tried
> with rocket m5 prism ac it would come on but no lan lights if you have 3
> rockets plugged in. First rocket m5 lan light would come on then if I plug
> in the other 2 rockets I can only get gps lights to come on and no lan
> lights. So I'm little confused on this.
>
>
>
> -Original Message-
> Subject: Re: [AFMUG] Is POE out settings on new powerbox pro different?
> From: "Mathew Howard" 
> To: af 
> Date: 07/07/17 02:36:04am
>
> Don't you just turn it on? I'm not sure where it is in the CLI, but in
> Winbox it should be under the PoE settings on each port just like it always
> was.
>
> On Thu, Jul 6, 2017 at 6:29 PM, Tim Reichhart  net> wrote:
>
> Then how would I be turn 2-5 ports on for poe?  There have be some kind of
> special setting to turn it on.
>
> -Original Message-
> Subject: Re: [AFMUG] Is POE out settings on new powerbox pro different?
> From: "Mathew Howard" 
> To: af 
> Date: 2017/07/06 22:58:16
>
>
> It looks like they removed that setting.
>
>
> I haven't seen the PowerBox Pro yet, but I'm assuming it's got the same
> guts as the hEX PoE (the gigabit version). We've had quite a few of those
> running for awhile now, and so far I haven't had any need to enable the
> long cable mode, like on the old ones, so maybe they reworked the design
> enough that it just isn't necessary anymore.
>
>
> On Thu, Jul 6, 2017 at 3:03 PM, Tim Reichhart  net> wrote:
> Hello Guys,
> I have brand new powerbox poe and when I try to set with this command
> /interface ethernet poe settings set ether1-poe-in-long-cable=yes I get
> "bad command name settings (line 1 column 25) is there something they
> changed that you cant set this anymore in terminal?
>
> Tim
>
>
>
>
>
>
>
>
>
>
>

Re: [AFMUG] Addition to new site.

[Jacob Turner]

Gorgeous site!

On Wed, Apr 12, 2017 at 7:48 PM, Sam Lambie  wrote:

> Cambium Medusa. Synced with Packetflux Syncbox 12. Powered with
> Syncinjectors by Packetflux.
>
> Just put it up today so no performance reviews yet. 101 customers coming
> from a 450 AP.
>
> Psyched
>
>

Re: [AFMUG] ePMP1000 Max PTP length

[Jacob Turner]

If you can deal with the slightly higher latency involved in running
tdd-ptp mode I'm not sure that there is a hard limit for ePMP.  If there is
it is likely 60+ miles.  Running ePTP mode though there are distance limits
of 32 miles for 20Mhz and 15 Miles for 40Mhz.

On Thu, Mar 30, 2017 at 10:36 AM, Jason Wilson 
wrote:

> The subject says it all.  What is the Maximum link length that a ePMP1000
> GPS Lite 5ghz will allow?   More than likely replacing a Mimosa b5c link
> that is 23.1 miles.  Mountaintop to Mountaintop.  It looks like I have had
> a third b5c die.  I'll know more once we get on site.
>
>
> Jason Wilson
> Remotely Located
> Providing High Speed Internet to out of the way places.
> 530-651-1736 <(530)%20651-1736>
> 530-748-9608 <(530)%20748-9608> Cell
> www.remotelylocated.com
>