Sounds like you may not have enough current to power on all of the prisms. You certainly want a 24v 2.5A power supply at least. You also may have to use the barrel plug instead of POE in to get enough juice.
On Thu, Jul 6, 2017 at 9:59 PM, Tim Reichhart < timreichh...@hometowncable.net> wrote: > > See ethernet1 doesn't have option for poe out only poe in so ports 2-5 > have option for poe but it only works when you force it on. Because I tried > with rocket m5 prism ac it would come on but no lan lights if you have 3 > rockets plugged in. First rocket m5 lan light would come on then if I plug > in the other 2 rockets I can only get gps lights to come on and no lan > lights. So I'm little confused on this. > > > > -----Original Message----- > Subject: Re: [AFMUG] Is POE out settings on new powerbox pro different? > From: "Mathew Howard" <mhoward...@gmail.com> > To: af <af@afmug.com> > Date: 07/07/17 02:36:04am > > Don't you just turn it on? I'm not sure where it is in the CLI, but in > Winbox it should be under the PoE settings on each port just like it always > was. > > On Thu, Jul 6, 2017 at 6:29 PM, Tim Reichhart <timreichhart@hometowncable. > net> wrote: > > Then how would I be turn 2-5 ports on for poe? There have be some kind of > special setting to turn it on. > > -----Original Message----- > Subject: Re: [AFMUG] Is POE out settings on new powerbox pro different? > From: "Mathew Howard" <mhoward...@gmail.com> > To: af <af@afmug.com> > Date: 2017/07/06 22:58:16 > > > It looks like they removed that setting. > > > I haven't seen the PowerBox Pro yet, but I'm assuming it's got the same > guts as the hEX PoE (the gigabit version). We've had quite a few of those > running for awhile now, and so far I haven't had any need to enable the > long cable mode, like on the old ones, so maybe they reworked the design > enough that it just isn't necessary anymore. > > > On Thu, Jul 6, 2017 at 3:03 PM, Tim Reichhart <timreichhart@hometowncable. > net> wrote: > Hello Guys, > I have brand new powerbox poe and when I try to set with this command > /interface ethernet poe settings set ether1-poe-in-long-cable=yes I get > "bad command name settings (line 1 column 25) is there something they > changed that you cant set this anymore in terminal? > > Tim > > > > > > > > > > >
