I've seen the 'Reg Bug' as we have come to call it on PMP100 equipment using
RADIUS on v13.1.3, and possibly a few times on the short time that we had
equipment on v12.1. It wasn't ever noticed on v11.2 for us. I can't speak on
PMP450, we don't have enough of it deployed to have noticed it yet.
This was a known problem in previous release notes though - On rare occasion,
when using RADIUS, SMs may go into “Registering”
state and does not pass traffic. Proxy access to the SM is still available.
Workaround is to drop the session and allow the SM to re-register or
disable RADIUS altogether.
I don't remember seeing in the notes where this was stated as fixed, but I also
don't remember seeing it mentioned as a 'still known problem or limitation'.
Date: Sun, 19 Jul 2015 02:13:10 +
From: mhopk...@onlinenw.com
To: af@afmug.com
Subject: Re: [AFMUG] Cambium 13.4
Yes we use radius.
On Jul 17, 2015 7:38 PM, Mark Radabaugh m...@amplex.net wrote:
Do you use RADIUS?I have seen that before with RADIUS but have not seen it
to date on the 13.4 units we are running, but we don’t run RADIUS
authentication currently
Mark
On Jul 17, 2015, at 8:10 PM, Matt Hopkins mhopk...@onlinenw.com wrote:
This was not a browser cache issue. The APs that had the
Registering issue had anywhere from 9-65 SMs. Cambium support
advised me to downgrade to 13.2.1 and said that it was a known
issue.
Matt HopkinsOnlineNW
support503.687.1030supp...@onlinenw.com
onlinenw.com
On 7/17/2015 4:34 PM, George Skorup
wrote:
Oh, forgot to mention, I didn't see any change in power levels
either.
On 7/17/2015 6:33 PM, George Skorup
wrote:
I've updated a couple 5GHz 450 sectors so far and haven't seen
this. They all have less than 20 SMs though. Do yours have a lot
of SMs? Are you also sure it's not a browser cache issue?
Yes, the Lites are a special build, 13.2.1.3 which Cambium
hasn't made available so I've also been hesitant to update any
of them.
On 7/17/2015 5:59 PM, Matt Hopkins
wrote:
I just wanted to throw out a heads-up for a Friday afternoon.
What is happening is that some of the SMs are displayed as
registering in the AP even after they are registered. You
could click on the SM in the table and it would take you to
the SM like normal still. This happened on a 2.4 450 and
multiple 5GHz 450 APs. The signal doesn't seem to matter as
some of the SMs had signals as good as -67 with 29 SNR.
Traffic would not pass over the SM and if they had an
additional VC for voice it wouldn't ever establish. I also saw
that overall signal levels of SMs were 5 db (give or take)
worse on 13.4. Additionally it seems that Lite APs (-APL) are
not letting me roll back to 13.2.1, or any other version for
that matter. I am glad I only upgraded a handful of APs
because I'm excited for the new CoA feature.
--
Matt HopkinsNetwork Administrator
503.687.1030supp...@onlinenw.com
onlinenw.com