Re: [AFMUG] crc errors
?i alsways find auto on cisco is betterwhen i try to lock it down radios are always half duplex or vice versa From: Af <af-boun...@afmug.com> on behalf of Chuck McCown <ch...@wbmfg.com> Sent: Tuesday, May 24, 2016 4:15 PM To: af@afmug.com Subject: Re: [AFMUG] crc errors I have had lots of problems with Cisco auto. I always lock it down. From: Ryan Mano<mailto:rm...@corp.mdswireless.com> Sent: Tuesday, May 24, 2016 2:01 PM To: af@afmug.com<mailto:af@afmug.com> Subject: Re: [AFMUG] crc errors ?cisco gear... i leave auto on ciscos From: Af <af-boun...@afmug.com> on behalf of Andreas Wiatowski <andr...@silowireless.com> Sent: Tuesday, May 24, 2016 2:07 PM To: af@afmug.com Subject: Re: [AFMUG] crc errors What type of switches/routers do you use? Mikrotiks...can be very problematic. Cheers, __ Andreas Wiatowski | CEO Silo Wireless Inc. Email andr...@silowireless.com 19 Sage Court Brantford, Ontario N3R 7T4 (CANADA) Tel +1.519.449.5656 Extension-600|Fax +1.519.449.5536 |Toll Free +1.866.727.4138 From: Af [mailto:af-boun...@afmug.com] On Behalf Of Ryan Mano Sent: Tuesday, May 24, 2016 2:01 PM To: af@afmug.com Subject: Re: [AFMUG] crc errors brand new...i replaced the old moto ones (beige? ones) From: Af <af-boun...@afmug.com<mailto:af-boun...@afmug.com>> on behalf of Chuck McCown <ch...@wbmfg.com<mailto:ch...@wbmfg.com>> Sent: Tuesday, May 24, 2016 1:53 PM To: af@afmug.com<mailto:af@afmug.com> Subject: Re: [AFMUG] crc errors CRC errors are frequently a surge suppressor issue. Sometimes they get wounded and cause errors. From: Ryan Mano<mailto:rm...@corp.mdswireless.com> Sent: Tuesday, May 24, 2016 11:24 AM To: af@afmug.com<mailto:af@afmug.com> Subject: Re: [AFMUG] crc errors ?i am using chucks surges and no there is no FM radio on them From: Af <af-boun...@afmug.com<mailto:af-boun...@afmug.com>> on behalf of Sean Heskett <af...@zirkel.us<mailto:af...@zirkel.us>> Sent: Tuesday, May 24, 2016 1:00 PM To: af@afmug.com<mailto:af@afmug.com> Subject: Re: [AFMUG] crc errors do the towers have and FM radio stations on them? -sean On Tue, May 24, 2016 at 9:57 AM, Ryan Mano <rm...@corp.mdswireless.com<mailto:rm...@corp.mdswireless.com>> wrote: most of my battles are at the tower...checking surges checking cables...all check out and I still end up replacing it also I notice an increase in Ethernet Link Detected and Ethernet Link Lost under stats in cambium radios either being APs ot BHs From: Af <af-boun...@afmug.com<mailto:af-boun...@afmug.com>> on behalf of Ken Hohhof <af...@kwisp.com<mailto:af...@kwisp.com>> Sent: Tuesday, May 24, 2016 11:51 AM To: af@afmug.com<mailto:af@afmug.com> Subject: Re: [AFMUG] crc errors If this is customer end, we get surge suppressors partly blown by lightning causing CRC errors. Next most common is critters partly chewing through cable. From: Justin Wilson<mailto:li...@mtin.net> Sent: Tuesday, May 24, 2016 10:46 AM To: af@afmug.com<mailto:af@afmug.com> Subject: Re: [AFMUG] crc errors A lot of what I have seen is probably just from personal experience, which makes it not too scientific. For example, We typically hardest the UBNT radios and left the Mikrotiks to auto. Things seemed happier this way. The Gigabit specification says it should be auto everything. Sometimes this can have issues between vendors. Justin Wilson j...@mtin.net<mailto:j...@mtin.net> --- http://www.mtin.net Owner/CEO xISP Solutions- Consulting - Data Centers - Bandwidth http://www.midwest-ix.com COO/Chairman Internet Exchange - Peering - Distributed Fabric On May 24, 2016, at 11:36 AM, Ryan Mano <rm...@corp.mdswireless.com<mailto:rm...@corp.mdswireless.com>> wrote: Want to hear how you guys go about handling crc errors on your radios? Like check duplex or check cables etc. Noticing in the past month or so am seeing an increase in crc errorswhen I doI change the duplex from 100 to 10base and it runs with no errors but the customer are not happy...sometimes I just can't put it into 100base crc just go nuts Lets here your battles with crc's
Re: [AFMUG] crc errors
I have had lots of problems with Cisco auto. I always lock it down. From: Ryan Mano Sent: Tuesday, May 24, 2016 2:01 PM To: af@afmug.com Subject: Re: [AFMUG] crc errors cisco gear... i leave auto on ciscos From: Af <af-boun...@afmug.com> on behalf of Andreas Wiatowski <andr...@silowireless.com> Sent: Tuesday, May 24, 2016 2:07 PM To: af@afmug.com Subject: Re: [AFMUG] crc errors What type of switches/routers do you use? Mikrotiks…can be very problematic. Cheers, __ Andreas Wiatowski | CEO Silo Wireless Inc. Email andr...@silowireless.com 19 Sage Court Brantford, Ontario N3R 7T4 (CANADA) Tel +1.519.449.5656 Extension-600|Fax +1.519.449.5536 |Toll Free +1.866.727.4138 From: Af [mailto:af-boun...@afmug.com] On Behalf Of Ryan Mano Sent: Tuesday, May 24, 2016 2:01 PM To: af@afmug.com Subject: Re: [AFMUG] crc errors brand new...i replaced the old moto ones (beige ones) From: Af <af-boun...@afmug.com> on behalf of Chuck McCown <ch...@wbmfg.com> Sent: Tuesday, May 24, 2016 1:53 PM To: af@afmug.com Subject: Re: [AFMUG] crc errors CRC errors are frequently a surge suppressor issue. Sometimes they get wounded and cause errors. From: Ryan Mano Sent: Tuesday, May 24, 2016 11:24 AM To: af@afmug.com Subject: Re: [AFMUG] crc errors i am using chucks surges and no there is no FM radio on them From: Af <af-boun...@afmug.com> on behalf of Sean Heskett <af...@zirkel.us> Sent: Tuesday, May 24, 2016 1:00 PM To: af@afmug.com Subject: Re: [AFMUG] crc errors do the towers have and FM radio stations on them? -sean On Tue, May 24, 2016 at 9:57 AM, Ryan Mano <rm...@corp.mdswireless.com> wrote: most of my battles are at the tower...checking surges checking cables...all check out and I still end up replacing it also I notice an increase in Ethernet Link Detected and Ethernet Link Lost under stats in cambium radios either being APs ot BHs -- From: Af <af-boun...@afmug.com> on behalf of Ken Hohhof <af...@kwisp.com> Sent: Tuesday, May 24, 2016 11:51 AM To: af@afmug.com Subject: Re: [AFMUG] crc errors If this is customer end, we get surge suppressors partly blown by lightning causing CRC errors. Next most common is critters partly chewing through cable. From: Justin Wilson Sent: Tuesday, May 24, 2016 10:46 AM To: af@afmug.com Subject: Re: [AFMUG] crc errors A lot of what I have seen is probably just from personal experience, which makes it not too scientific. For example, We typically hardest the UBNT radios and left the Mikrotiks to auto. Things seemed happier this way. The Gigabit specification says it should be auto everything. Sometimes this can have issues between vendors. Justin Wilson j...@mtin.net --- http://www.mtin.net Owner/CEO xISP Solutions- Consulting – Data Centers - Bandwidth http://www.midwest-ix.com COO/Chairman Internet Exchange - Peering - Distributed Fabric On May 24, 2016, at 11:36 AM, Ryan Mano <rm...@corp.mdswireless.com> wrote: Want to hear how you guys go about handling crc errors on your radios? Like check duplex or check cables etc. Noticing in the past month or so am seeing an increase in crc errors….when I do….I change the duplex from 100 to 10base and it runs with no errors but the customer are not happy…sometimes I just can’t put it into 100base crc just go nuts Lets here your battles with crc’s
Re: [AFMUG] crc errors
?cisco gear... i leave auto on ciscos From: Af <af-boun...@afmug.com> on behalf of Andreas Wiatowski <andr...@silowireless.com> Sent: Tuesday, May 24, 2016 2:07 PM To: af@afmug.com Subject: Re: [AFMUG] crc errors What type of switches/routers do you use? Mikrotiks...can be very problematic. Cheers, __ Andreas Wiatowski | CEO Silo Wireless Inc. Email andr...@silowireless.com 19 Sage Court Brantford, Ontario N3R 7T4 (CANADA) Tel +1.519.449.5656 Extension-600|Fax +1.519.449.5536 |Toll Free +1.866.727.4138 From: Af [mailto:af-boun...@afmug.com] On Behalf Of Ryan Mano Sent: Tuesday, May 24, 2016 2:01 PM To: af@afmug.com Subject: Re: [AFMUG] crc errors brand new...i replaced the old moto ones (beige? ones) From: Af <af-boun...@afmug.com<mailto:af-boun...@afmug.com>> on behalf of Chuck McCown <ch...@wbmfg.com<mailto:ch...@wbmfg.com>> Sent: Tuesday, May 24, 2016 1:53 PM To: af@afmug.com<mailto:af@afmug.com> Subject: Re: [AFMUG] crc errors CRC errors are frequently a surge suppressor issue. Sometimes they get wounded and cause errors. From: Ryan Mano<mailto:rm...@corp.mdswireless.com> Sent: Tuesday, May 24, 2016 11:24 AM To: af@afmug.com<mailto:af@afmug.com> Subject: Re: [AFMUG] crc errors ?i am using chucks surges and no there is no FM radio on them From: Af <af-boun...@afmug.com<mailto:af-boun...@afmug.com>> on behalf of Sean Heskett <af...@zirkel.us<mailto:af...@zirkel.us>> Sent: Tuesday, May 24, 2016 1:00 PM To: af@afmug.com<mailto:af@afmug.com> Subject: Re: [AFMUG] crc errors do the towers have and FM radio stations on them? -sean On Tue, May 24, 2016 at 9:57 AM, Ryan Mano <rm...@corp.mdswireless.com<mailto:rm...@corp.mdswireless.com>> wrote: most of my battles are at the tower...checking surges checking cables...all check out and I still end up replacing it also I notice an increase in Ethernet Link Detected and Ethernet Link Lost under stats in cambium radios either being APs ot BHs From: Af <af-boun...@afmug.com<mailto:af-boun...@afmug.com>> on behalf of Ken Hohhof <af...@kwisp.com<mailto:af...@kwisp.com>> Sent: Tuesday, May 24, 2016 11:51 AM To: af@afmug.com<mailto:af@afmug.com> Subject: Re: [AFMUG] crc errors If this is customer end, we get surge suppressors partly blown by lightning causing CRC errors. Next most common is critters partly chewing through cable. From: Justin Wilson<mailto:li...@mtin.net> Sent: Tuesday, May 24, 2016 10:46 AM To: af@afmug.com<mailto:af@afmug.com> Subject: Re: [AFMUG] crc errors A lot of what I have seen is probably just from personal experience, which makes it not too scientific. For example, We typically hardest the UBNT radios and left the Mikrotiks to auto. Things seemed happier this way. The Gigabit specification says it should be auto everything. Sometimes this can have issues between vendors. Justin Wilson j...@mtin.net<mailto:j...@mtin.net> --- http://www.mtin.net Owner/CEO xISP Solutions- Consulting - Data Centers - Bandwidth http://www.midwest-ix.com COO/Chairman Internet Exchange - Peering - Distributed Fabric On May 24, 2016, at 11:36 AM, Ryan Mano <rm...@corp.mdswireless.com<mailto:rm...@corp.mdswireless.com>> wrote: Want to hear how you guys go about handling crc errors on your radios? Like check duplex or check cables etc. Noticing in the past month or so am seeing an increase in crc errorswhen I doI change the duplex from 100 to 10base and it runs with no errors but the customer are not happy...sometimes I just can't put it into 100base crc just go nuts Lets here your battles with crc's
Re: [AFMUG] crc errors
There was a time in history where the AP had errors on a good perfect cable until you put in a surge suppressor. Then the errors went away. From: Ryan Mano Sent: Tuesday, May 24, 2016 12:00 PM To: af@afmug.com Subject: Re: [AFMUG] crc errors brand new...i replaced the old moto ones (beige ones) From: Af <af-boun...@afmug.com> on behalf of Chuck McCown <ch...@wbmfg.com> Sent: Tuesday, May 24, 2016 1:53 PM To: af@afmug.com Subject: Re: [AFMUG] crc errors CRC errors are frequently a surge suppressor issue. Sometimes they get wounded and cause errors. From: Ryan Mano Sent: Tuesday, May 24, 2016 11:24 AM To: af@afmug.com Subject: Re: [AFMUG] crc errors i am using chucks surges and no there is no FM radio on them From: Af <af-boun...@afmug.com> on behalf of Sean Heskett <af...@zirkel.us> Sent: Tuesday, May 24, 2016 1:00 PM To: af@afmug.com Subject: Re: [AFMUG] crc errors do the towers have and FM radio stations on them? -sean On Tue, May 24, 2016 at 9:57 AM, Ryan Mano <rm...@corp.mdswireless.com> wrote: most of my battles are at the tower...checking surges checking cables...all check out and I still end up replacing it also I notice an increase in Ethernet Link Detected and Ethernet Link Lost under stats in cambium radios either being APs ot BHs -- From: Af <af-boun...@afmug.com> on behalf of Ken Hohhof <af...@kwisp.com> Sent: Tuesday, May 24, 2016 11:51 AM To: af@afmug.com Subject: Re: [AFMUG] crc errors If this is customer end, we get surge suppressors partly blown by lightning causing CRC errors. Next most common is critters partly chewing through cable. From: Justin Wilson Sent: Tuesday, May 24, 2016 10:46 AM To: af@afmug.com Subject: Re: [AFMUG] crc errors A lot of what I have seen is probably just from personal experience, which makes it not too scientific. For example, We typically hardest the UBNT radios and left the Mikrotiks to auto. Things seemed happier this way. The Gigabit specification says it should be auto everything. Sometimes this can have issues between vendors. Justin Wilson j...@mtin.net --- http://www.mtin.net Owner/CEO xISP Solutions- Consulting – Data Centers - Bandwidth http://www.midwest-ix.com COO/Chairman Internet Exchange - Peering - Distributed Fabric On May 24, 2016, at 11:36 AM, Ryan Mano <rm...@corp.mdswireless.com> wrote: Want to hear how you guys go about handling crc errors on your radios? Like check duplex or check cables etc. Noticing in the past month or so am seeing an increase in crc errors….when I do….I change the duplex from 100 to 10base and it runs with no errors but the customer are not happy…sometimes I just can’t put it into 100base crc just go nuts Lets here your battles with crc’s
Re: [AFMUG] crc errors
What type of switches/routers do you use? Mikrotiks…can be very problematic. Cheers, __ Andreas Wiatowski | CEO Silo Wireless Inc. Email andr...@silowireless.com 19 Sage Court Brantford, Ontario N3R 7T4 (CANADA) Tel +1.519.449.5656 Extension-600|Fax +1.519.449.5536 |Toll Free +1.866.727.4138 From: Af [mailto:af-boun...@afmug.com] On Behalf Of Ryan Mano Sent: Tuesday, May 24, 2016 2:01 PM To: af@afmug.com Subject: Re: [AFMUG] crc errors brand new...i replaced the old moto ones (beige ones) From: Af <af-boun...@afmug.com<mailto:af-boun...@afmug.com>> on behalf of Chuck McCown <ch...@wbmfg.com<mailto:ch...@wbmfg.com>> Sent: Tuesday, May 24, 2016 1:53 PM To: af@afmug.com<mailto:af@afmug.com> Subject: Re: [AFMUG] crc errors CRC errors are frequently a surge suppressor issue. Sometimes they get wounded and cause errors. From: Ryan Mano<mailto:rm...@corp.mdswireless.com> Sent: Tuesday, May 24, 2016 11:24 AM To: af@afmug.com<mailto:af@afmug.com> Subject: Re: [AFMUG] crc errors i am using chucks surges and no there is no FM radio on them From: Af <af-boun...@afmug.com<mailto:af-boun...@afmug.com>> on behalf of Sean Heskett <af...@zirkel.us<mailto:af...@zirkel.us>> Sent: Tuesday, May 24, 2016 1:00 PM To: af@afmug.com<mailto:af@afmug.com> Subject: Re: [AFMUG] crc errors do the towers have and FM radio stations on them? -sean On Tue, May 24, 2016 at 9:57 AM, Ryan Mano <rm...@corp.mdswireless.com<mailto:rm...@corp.mdswireless.com>> wrote: most of my battles are at the tower...checking surges checking cables...all check out and I still end up replacing it also I notice an increase in Ethernet Link Detected and Ethernet Link Lost under stats in cambium radios either being APs ot BHs From: Af <af-boun...@afmug.com<mailto:af-boun...@afmug.com>> on behalf of Ken Hohhof <af...@kwisp.com<mailto:af...@kwisp.com>> Sent: Tuesday, May 24, 2016 11:51 AM To: af@afmug.com<mailto:af@afmug.com> Subject: Re: [AFMUG] crc errors If this is customer end, we get surge suppressors partly blown by lightning causing CRC errors. Next most common is critters partly chewing through cable. From: Justin Wilson<mailto:li...@mtin.net> Sent: Tuesday, May 24, 2016 10:46 AM To: af@afmug.com<mailto:af@afmug.com> Subject: Re: [AFMUG] crc errors A lot of what I have seen is probably just from personal experience, which makes it not too scientific. For example, We typically hardest the UBNT radios and left the Mikrotiks to auto. Things seemed happier this way. The Gigabit specification says it should be auto everything. Sometimes this can have issues between vendors. Justin Wilson j...@mtin.net<mailto:j...@mtin.net> --- http://www.mtin.net Owner/CEO xISP Solutions- Consulting – Data Centers - Bandwidth http://www.midwest-ix.com COO/Chairman Internet Exchange - Peering - Distributed Fabric On May 24, 2016, at 11:36 AM, Ryan Mano <rm...@corp.mdswireless.com<mailto:rm...@corp.mdswireless.com>> wrote: Want to hear how you guys go about handling crc errors on your radios? Like check duplex or check cables etc. Noticing in the past month or so am seeing an increase in crc errors….when I do….I change the duplex from 100 to 10base and it runs with no errors but the customer are not happy…sometimes I just can’t put it into 100base crc just go nuts Lets here your battles with crc’s
Re: [AFMUG] crc errors
brand new...i replaced the old moto ones (beige? ones) From: Af <af-boun...@afmug.com> on behalf of Chuck McCown <ch...@wbmfg.com> Sent: Tuesday, May 24, 2016 1:53 PM To: af@afmug.com Subject: Re: [AFMUG] crc errors CRC errors are frequently a surge suppressor issue. Sometimes they get wounded and cause errors. From: Ryan Mano<mailto:rm...@corp.mdswireless.com> Sent: Tuesday, May 24, 2016 11:24 AM To: af@afmug.com<mailto:af@afmug.com> Subject: Re: [AFMUG] crc errors ?i am using chucks surges and no there is no FM radio on them From: Af <af-boun...@afmug.com> on behalf of Sean Heskett <af...@zirkel.us> Sent: Tuesday, May 24, 2016 1:00 PM To: af@afmug.com Subject: Re: [AFMUG] crc errors do the towers have and FM radio stations on them? -sean On Tue, May 24, 2016 at 9:57 AM, Ryan Mano <rm...@corp.mdswireless.com<mailto:rm...@corp.mdswireless.com>> wrote: most of my battles are at the tower...checking surges checking cables...all check out and I still end up replacing it also I notice an increase in Ethernet Link Detected and Ethernet Link Lost under stats in cambium radios either being APs ot BHs From: Af <af-boun...@afmug.com<mailto:af-boun...@afmug.com>> on behalf of Ken Hohhof <af...@kwisp.com<mailto:af...@kwisp.com>> Sent: Tuesday, May 24, 2016 11:51 AM To: af@afmug.com<mailto:af@afmug.com> Subject: Re: [AFMUG] crc errors If this is customer end, we get surge suppressors partly blown by lightning causing CRC errors. Next most common is critters partly chewing through cable. From: Justin Wilson<mailto:li...@mtin.net> Sent: Tuesday, May 24, 2016 10:46 AM To: af@afmug.com<mailto:af@afmug.com> Subject: Re: [AFMUG] crc errors A lot of what I have seen is probably just from personal experience, which makes it not too scientific. For example, We typically hardest the UBNT radios and left the Mikrotiks to auto. Things seemed happier this way. The Gigabit specification says it should be auto everything. Sometimes this can have issues between vendors. Justin Wilson j...@mtin.net<mailto:j...@mtin.net> --- http://www.mtin.net Owner/CEO xISP Solutions- Consulting - Data Centers - Bandwidth http://www.midwest-ix.com COO/Chairman Internet Exchange - Peering - Distributed Fabric On May 24, 2016, at 11:36 AM, Ryan Mano <rm...@corp.mdswireless.com<mailto:rm...@corp.mdswireless.com>> wrote: Want to hear how you guys go about handling crc errors on your radios? Like check duplex or check cables etc. Noticing in the past month or so am seeing an increase in crc errorswhen I doI change the duplex from 100 to 10base and it runs with no errors but the customer are not happy...sometimes I just can't put it into 100base crc just go nuts Lets here your battles with crc's
Re: [AFMUG] crc errors
is it their feelings that get hurt? did you put the feels in the surge suppressors chuck? On Tue, May 24, 2016 at 12:53 PM, Chuck McCown <ch...@wbmfg.com> wrote: > CRC errors are frequently a surge suppressor issue. Sometimes they get > wounded and cause errors. > > *From:* Ryan Mano <rm...@corp.mdswireless.com> > *Sent:* Tuesday, May 24, 2016 11:24 AM > *To:* af@afmug.com > *Subject:* Re: [AFMUG] crc errors > > > i am using chucks surges and no there is no FM radio on them > -- > *From:* Af <af-boun...@afmug.com> on behalf of Sean Heskett < > af...@zirkel.us> > *Sent:* Tuesday, May 24, 2016 1:00 PM > *To:* af@afmug.com > *Subject:* Re: [AFMUG] crc errors > > do the towers have and FM radio stations on them? > > -sean > > > On Tue, May 24, 2016 at 9:57 AM, Ryan Mano <rm...@corp.mdswireless.com> > wrote: > >> most of my battles are at the tower...checking surges checking >> cables...all check out and I still end up replacing it >> >> also I notice an increase in Ethernet Link Detected and Ethernet Link >> Lost under stats in cambium radios either being APs ot BHs >> >> >> -- >> *From:* Af <af-boun...@afmug.com> on behalf of Ken Hohhof < >> af...@kwisp.com> >> *Sent:* Tuesday, May 24, 2016 11:51 AM >> *To:* af@afmug.com >> *Subject:* Re: [AFMUG] crc errors >> >> If this is customer end, we get surge suppressors partly blown by >> lightning causing CRC errors. Next most common is critters partly chewing >> through cable. >> >> >> *From:* Justin Wilson <li...@mtin.net> >> *Sent:* Tuesday, May 24, 2016 10:46 AM >> *To:* af@afmug.com >> *Subject:* Re: [AFMUG] crc errors >> >> A lot of what I have seen is probably just from personal experience, >> which makes it not too scientific. For example, We typically hardest the >> UBNT radios and left the Mikrotiks to auto. Things seemed happier this >> way. The Gigabit specification says it should be auto everything. Sometimes >> this can have issues between vendors. >> >> >> >> Justin Wilson >> j...@mtin.net >> >> --- >> http://www.mtin.net Owner/CEO >> xISP Solutions- Consulting – Data Centers - Bandwidth >> >> http://www.midwest-ix.com COO/Chairman >> Internet Exchange - Peering - Distributed Fabric >> >> >> On May 24, 2016, at 11:36 AM, Ryan Mano <rm...@corp.mdswireless.com> >> wrote: >> >> >> Want to hear how you guys go about handling crc errors on your radios? >> >> Like check duplex or check cables etc. >> >> Noticing in the past month or so am seeing an increase in crc >> errors….when I do….I change the duplex from 100 to 10base and it runs with >> no errors but the customer are not happy…sometimes I just can’t put it into >> 100base crc just go nuts >> >> Lets here your battles with crc’s >> >> >> > > -- If you only see yourself as part of the team but you don't see your team as part of yourself you have already failed as part of the team.
Re: [AFMUG] crc errors
CRC errors are frequently a surge suppressor issue. Sometimes they get wounded and cause errors. From: Ryan Mano Sent: Tuesday, May 24, 2016 11:24 AM To: af@afmug.com Subject: Re: [AFMUG] crc errors i am using chucks surges and no there is no FM radio on them From: Af <af-boun...@afmug.com> on behalf of Sean Heskett <af...@zirkel.us> Sent: Tuesday, May 24, 2016 1:00 PM To: af@afmug.com Subject: Re: [AFMUG] crc errors do the towers have and FM radio stations on them? -sean On Tue, May 24, 2016 at 9:57 AM, Ryan Mano <rm...@corp.mdswireless.com> wrote: most of my battles are at the tower...checking surges checking cables...all check out and I still end up replacing it also I notice an increase in Ethernet Link Detected and Ethernet Link Lost under stats in cambium radios either being APs ot BHs -- From: Af <af-boun...@afmug.com> on behalf of Ken Hohhof <af...@kwisp.com> Sent: Tuesday, May 24, 2016 11:51 AM To: af@afmug.com Subject: Re: [AFMUG] crc errors If this is customer end, we get surge suppressors partly blown by lightning causing CRC errors. Next most common is critters partly chewing through cable. From: Justin Wilson Sent: Tuesday, May 24, 2016 10:46 AM To: af@afmug.com Subject: Re: [AFMUG] crc errors A lot of what I have seen is probably just from personal experience, which makes it not too scientific. For example, We typically hardest the UBNT radios and left the Mikrotiks to auto. Things seemed happier this way. The Gigabit specification says it should be auto everything. Sometimes this can have issues between vendors. Justin Wilson j...@mtin.net --- http://www.mtin.net Owner/CEO xISP Solutions- Consulting – Data Centers - Bandwidth http://www.midwest-ix.com COO/Chairman Internet Exchange - Peering - Distributed Fabric On May 24, 2016, at 11:36 AM, Ryan Mano <rm...@corp.mdswireless.com> wrote: Want to hear how you guys go about handling crc errors on your radios? Like check duplex or check cables etc. Noticing in the past month or so am seeing an increase in crc errors….when I do….I change the duplex from 100 to 10base and it runs with no errors but the customer are not happy…sometimes I just can’t put it into 100base crc just go nuts Lets here your battles with crc’s
Re: [AFMUG] crc errors
?i am using chucks surges and no there is no FM radio on them From: Af <af-boun...@afmug.com> on behalf of Sean Heskett <af...@zirkel.us> Sent: Tuesday, May 24, 2016 1:00 PM To: af@afmug.com Subject: Re: [AFMUG] crc errors do the towers have and FM radio stations on them? -sean On Tue, May 24, 2016 at 9:57 AM, Ryan Mano <rm...@corp.mdswireless.com<mailto:rm...@corp.mdswireless.com>> wrote: most of my battles are at the tower...checking surges checking cables...all check out and I still end up replacing it also I notice an increase in Ethernet Link Detected and Ethernet Link Lost under stats in cambium radios either being APs ot BHs From: Af <af-boun...@afmug.com<mailto:af-boun...@afmug.com>> on behalf of Ken Hohhof <af...@kwisp.com<mailto:af...@kwisp.com>> Sent: Tuesday, May 24, 2016 11:51 AM To: af@afmug.com<mailto:af@afmug.com> Subject: Re: [AFMUG] crc errors If this is customer end, we get surge suppressors partly blown by lightning causing CRC errors. Next most common is critters partly chewing through cable. From: Justin Wilson<mailto:li...@mtin.net> Sent: Tuesday, May 24, 2016 10:46 AM To: af@afmug.com<mailto:af@afmug.com> Subject: Re: [AFMUG] crc errors A lot of what I have seen is probably just from personal experience, which makes it not too scientific. For example, We typically hardest the UBNT radios and left the Mikrotiks to auto. Things seemed happier this way. The Gigabit specification says it should be auto everything. Sometimes this can have issues between vendors. Justin Wilson j...@mtin.net<mailto:j...@mtin.net> --- http://www.mtin.net Owner/CEO xISP Solutions- Consulting - Data Centers - Bandwidth http://www.midwest-ix.com COO/Chairman Internet Exchange - Peering - Distributed Fabric On May 24, 2016, at 11:36 AM, Ryan Mano <rm...@corp.mdswireless.com<mailto:rm...@corp.mdswireless.com>> wrote: Want to hear how you guys go about handling crc errors on your radios? Like check duplex or check cables etc. Noticing in the past month or so am seeing an increase in crc errorswhen I doI change the duplex from 100 to 10base and it runs with no errors but the customer are not happy...sometimes I just can't put it into 100base crc just go nuts Lets here your battles with crc's
Re: [AFMUG] crc errors
do the towers have and FM radio stations on them? -sean On Tue, May 24, 2016 at 9:57 AM, Ryan Mano <rm...@corp.mdswireless.com> wrote: > most of my battles are at the tower...checking surges checking > cables...all check out and I still end up replacing it > > also I notice an increase in Ethernet Link Detected and Ethernet Link > Lost under stats in cambium radios either being APs ot BHs > > > -- > *From:* Af <af-boun...@afmug.com> on behalf of Ken Hohhof <af...@kwisp.com > > > *Sent:* Tuesday, May 24, 2016 11:51 AM > *To:* af@afmug.com > *Subject:* Re: [AFMUG] crc errors > > If this is customer end, we get surge suppressors partly blown by > lightning causing CRC errors. Next most common is critters partly chewing > through cable. > > > *From:* Justin Wilson <li...@mtin.net> > *Sent:* Tuesday, May 24, 2016 10:46 AM > *To:* af@afmug.com > *Subject:* Re: [AFMUG] crc errors > > A lot of what I have seen is probably just from personal experience, which > makes it not too scientific. For example, We typically hardest the UBNT > radios and left the Mikrotiks to auto. Things seemed happier this way. The > Gigabit specification says it should be auto everything. Sometimes this can > have issues between vendors. > > > > Justin Wilson > j...@mtin.net > > --- > http://www.mtin.net Owner/CEO > xISP Solutions- Consulting – Data Centers - Bandwidth > > http://www.midwest-ix.com COO/Chairman > Internet Exchange - Peering - Distributed Fabric > > > On May 24, 2016, at 11:36 AM, Ryan Mano <rm...@corp.mdswireless.com> > wrote: > > > Want to hear how you guys go about handling crc errors on your radios? > > Like check duplex or check cables etc. > > Noticing in the past month or so am seeing an increase in crc errors….when > I do….I change the duplex from 100 to 10base and it runs with no errors but > the customer are not happy…sometimes I just can’t put it into 100base crc > just go nuts > > Lets here your battles with crc’s > > >
Re: [AFMUG] crc errors
are you using chucks surge suppressors? On Tue, May 24, 2016 at 10:57 AM, Ryan Mano <rm...@corp.mdswireless.com> wrote: > most of my battles are at the tower...checking surges checking > cables...all check out and I still end up replacing it > > also I notice an increase in Ethernet Link Detected and Ethernet Link > Lost under stats in cambium radios either being APs ot BHs > > > -- > *From:* Af <af-boun...@afmug.com> on behalf of Ken Hohhof <af...@kwisp.com > > > *Sent:* Tuesday, May 24, 2016 11:51 AM > *To:* af@afmug.com > *Subject:* Re: [AFMUG] crc errors > > If this is customer end, we get surge suppressors partly blown by > lightning causing CRC errors. Next most common is critters partly chewing > through cable. > > > *From:* Justin Wilson <li...@mtin.net> > *Sent:* Tuesday, May 24, 2016 10:46 AM > *To:* af@afmug.com > *Subject:* Re: [AFMUG] crc errors > > A lot of what I have seen is probably just from personal experience, which > makes it not too scientific. For example, We typically hardest the UBNT > radios and left the Mikrotiks to auto. Things seemed happier this way. The > Gigabit specification says it should be auto everything. Sometimes this can > have issues between vendors. > > > > Justin Wilson > j...@mtin.net > > --- > http://www.mtin.net Owner/CEO > xISP Solutions- Consulting – Data Centers - Bandwidth > > http://www.midwest-ix.com COO/Chairman > Internet Exchange - Peering - Distributed Fabric > > > On May 24, 2016, at 11:36 AM, Ryan Mano <rm...@corp.mdswireless.com> > wrote: > > > Want to hear how you guys go about handling crc errors on your radios? > > Like check duplex or check cables etc. > > Noticing in the past month or so am seeing an increase in crc errors….when > I do….I change the duplex from 100 to 10base and it runs with no errors but > the customer are not happy…sometimes I just can’t put it into 100base crc > just go nuts > > Lets here your battles with crc’s > > > -- If you only see yourself as part of the team but you don't see your team as part of yourself you have already failed as part of the team.
Re: [AFMUG] crc errors
most of my battles are at the tower...checking surges checking cables...all check out and I still end up replacing it also I notice an increase in Ethernet Link Detected and Ethernet Link Lost under stats in cambium radios either being APs ot BHs From: Af <af-boun...@afmug.com> on behalf of Ken Hohhof <af...@kwisp.com> Sent: Tuesday, May 24, 2016 11:51 AM To: af@afmug.com Subject: Re: [AFMUG] crc errors If this is customer end, we get surge suppressors partly blown by lightning causing CRC errors. Next most common is critters partly chewing through cable. From: Justin Wilson<mailto:li...@mtin.net> Sent: Tuesday, May 24, 2016 10:46 AM To: af@afmug.com<mailto:af@afmug.com> Subject: Re: [AFMUG] crc errors A lot of what I have seen is probably just from personal experience, which makes it not too scientific. For example, We typically hardest the UBNT radios and left the Mikrotiks to auto. Things seemed happier this way. The Gigabit specification says it should be auto everything. Sometimes this can have issues between vendors. Justin Wilson j...@mtin.net<mailto:j...@mtin.net> --- http://www.mtin.net Owner/CEO xISP Solutions- Consulting - Data Centers - Bandwidth http://www.midwest-ix.com COO/Chairman Internet Exchange - Peering - Distributed Fabric On May 24, 2016, at 11:36 AM, Ryan Mano <rm...@corp.mdswireless.com<mailto:rm...@corp.mdswireless.com>> wrote: Want to hear how you guys go about handling crc errors on your radios? Like check duplex or check cables etc. Noticing in the past month or so am seeing an increase in crc errorswhen I doI change the duplex from 100 to 10base and it runs with no errors but the customer are not happy...sometimes I just can't put it into 100base crc just go nuts Lets here your battles with crc's
Re: [AFMUG] crc errors
If this is customer end, we get surge suppressors partly blown by lightning causing CRC errors. Next most common is critters partly chewing through cable. From: Justin Wilson Sent: Tuesday, May 24, 2016 10:46 AM To: af@afmug.com Subject: Re: [AFMUG] crc errors A lot of what I have seen is probably just from personal experience, which makes it not too scientific. For example, We typically hardest the UBNT radios and left the Mikrotiks to auto. Things seemed happier this way. The Gigabit specification says it should be auto everything. Sometimes this can have issues between vendors. Justin Wilson j...@mtin.net --- http://www.mtin.net Owner/CEO xISP Solutions- Consulting – Data Centers - Bandwidth http://www.midwest-ix.com COO/Chairman Internet Exchange - Peering - Distributed Fabric On May 24, 2016, at 11:36 AM, Ryan Mano <rm...@corp.mdswireless.com> wrote: Want to hear how you guys go about handling crc errors on your radios? Like check duplex or check cables etc. Noticing in the past month or so am seeing an increase in crc errors….when I do….I change the duplex from 100 to 10base and it runs with no errors but the customer are not happy…sometimes I just can’t put it into 100base crc just go nuts Lets here your battles with crc’s
Re: [AFMUG] crc errors
A lot of what I have seen is probably just from personal experience, which makes it not too scientific. For example, We typically hardest the UBNT radios and left the Mikrotiks to auto. Things seemed happier this way. The Gigabit specification says it should be auto everything. Sometimes this can have issues between vendors. Justin Wilson j...@mtin.net --- http://www.mtin.net Owner/CEO xISP Solutions- Consulting – Data Centers - Bandwidth http://www.midwest-ix.com COO/Chairman Internet Exchange - Peering - Distributed Fabric > On May 24, 2016, at 11:36 AM, Ryan Manowrote: > > > Want to hear how you guys go about handling crc errors on your radios? > > Like check duplex or check cables etc. > > Noticing in the past month or so am seeing an increase in crc errors….when I > do….I change the duplex from 100 to 10base and it runs with no errors but the > customer are not happy…sometimes I just can’t put it into 100base crc just go > nuts > > Lets here your battles with crc’s
Re: [AFMUG] crc errors
SFP SFP SFP SFP SFP SFP Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Tue, May 24, 2016 at 11:36 AM, Ryan Manowrote: > > > Want to hear how you guys go about handling crc errors on your radios? > > > > Like check duplex or check cables etc. > > > > Noticing in the past month or so am seeing an increase in crc errors….when > I do….I change the duplex from 100 to 10base and it runs with no errors but > the customer are not happy…sometimes I just can’t put it into 100base crc > just go nuts > > > > Lets here your battles with crc’s > > >
[AFMUG] crc errors
Want to hear how you guys go about handling crc errors on your radios? Like check duplex or check cables etc. Noticing in the past month or so am seeing an increase in crc errorswhen I doI change the duplex from 100 to 10base and it runs with no errors but the customer are not happy...sometimes I just can't put it into 100base crc just go nuts Lets here your battles with crc's