Re: [AFMUG] development platform for data/control system
One of these with the proper relays might do the job, not sure about temperature though. http://www.digital-loggers.com/din.html On Thu, Nov 6, 2014 at 2:14 PM, Ty Featherling via Af wrote: > I have been asked what the feasibility is of us developing a controller > that can control some servos and relays to control a few things in a comm > building. Basically be able to turn the lights on and off, monitor the > temperature, turn on a heater, and control a magnetic door lock. The > products are all lined out for controlling each of those but we need a > controller that can deal with the IO and be able to be run from a webpage. > > My first though was Arduino or Beagleboard. Anyone have any experience > with these things that could recommend a platform to build off of? The > basic requirements are ethernet interface, a number of digital and analog > IO connections and the ability to communicate with a web-server backend. > > -Ty >
Re: [AFMUG] development platform for data/control system
Check out click PLCs, I think automationdirect sells them On November 6, 2014 12:19:03 PM AKST, Chuck McCown via Af wrote: >You could use a PLC. >I have used microcontrollers for years but am too lazy these days. >If you don’t like sitemonitor, RMS makes a nice telemetry board too. > >From: Ty Featherling via Af >Sent: Thursday, November 06, 2014 1:44 PM >To: af@afmug.com >Subject: Re: [AFMUG] development platform for data/control system > >Good point Chuck. Just use SNMP for the data. Keefe, I'm sorry but I >have zero faith that mFi will be around for all that long. How long >since launch and it hasn't been updated or spoken of again? You can >only just now get parts without months of waiting. > >Cameron, I will look into that thanks. > >Anyone else have any thoughts on microcontollers? > >-Ty > >On Thu, Nov 6, 2014 at 2:29 PM, Chuck McCown via Af >wrote: > > You could do much of this with a site monitor. > > From: Cameron Crum via Af > Sent: Thursday, November 06, 2014 1:26 PM > To: af@afmug.com > Subject: Re: [AFMUG] development platform for data/control system > >Sorry, forgot the link >http://www.embeddedcontrolconcepts.com/products.html > >On Thu, Nov 6, 2014 at 2:24 PM, Cameron Crum via Af >wrote: > >How many IO connections? I use a BCS-460 for my little brewery. It was >designed with brewers in mind, but could be used for any application >needing web based control for relays and such. There are a couple >models with different numbers of inputs and outputs, has a built in web >server for controlling it all, and they have an API so you could write >your own. I wrote an andoid app called Brew Mate on the android market >so I can use my phone with it. It might be worth looking at before >re-inventing the wheel. > >Cameron > >On Thu, Nov 6, 2014 at 2:14 PM, Ty Featherling via Af >wrote: > >I have been asked what the feasibility is of us developing a controller >that can control some servos and relays to control a few things in a >comm building. Basically be able to turn the lights on and off, monitor >the temperature, turn on a heater, and control a magnetic door lock. >The products are all lined out for controlling each of those but we >need a controller that can deal with the IO and be able to be run from >a webpage. > >My first though was Arduino or Beagleboard. Anyone have any experience >with these things that could recommend a platform to build off of? The >basic requirements are ethernet interface, a number of digital and >analog IO connections and the ability to communicate with a web-server >backend. > > -Ty -- Sent from my Android device with K-9 Mail. Please excuse my brevity.
Re: [AFMUG] development platform for data/control system
Irs automationdirect.com and look at Koyo. Jaime Solorza On Nov 6, 2014 2:09 PM, "Jaime Solorza via Af" wrote: > Look at Direct Automation for one > . > > Jaime Solorza > On Nov 6, 2014 1:44 PM, "Ty Featherling via Af" wrote: > >> Good point Chuck. Just use SNMP for the data. Keefe, I'm sorry but I have >> zero faith that mFi will be around for all that long. How long since launch >> and it hasn't been updated or spoken of again? You can only just now get >> parts without months of waiting. >> >> Cameron, I will look into that thanks. >> >> Anyone else have any thoughts on microcontollers? >> >> -Ty >> >> On Thu, Nov 6, 2014 at 2:29 PM, Chuck McCown via Af wrote: >> >>> You could do much of this with a site monitor. >>> >>> *From:* Cameron Crum via Af >>> *Sent:* Thursday, November 06, 2014 1:26 PM >>> *To:* af@afmug.com >>> *Subject:* Re: [AFMUG] development platform for data/control system >>> >>> Sorry, forgot the link >>> http://www.embeddedcontrolconcepts.com/products.html >>> >>> On Thu, Nov 6, 2014 at 2:24 PM, Cameron Crum via Af >>> wrote: >>> >>>> How many IO connections? I use a BCS-460 for my little brewery. It was >>>> designed with brewers in mind, but could be used for any application >>>> needing web based control for relays and such. There are a couple models >>>> with different numbers of inputs and outputs, has a built in web server for >>>> controlling it all, and they have an API so you could write your own. I >>>> wrote an andoid app called Brew Mate on the android market so I can use my >>>> phone with it. It might be worth looking at before re-inventing the wheel. >>>> >>>> Cameron >>>> >>>> On Thu, Nov 6, 2014 at 2:14 PM, Ty Featherling via Af >>>> wrote: >>>> >>>>> I have been asked what the feasibility is of us developing a >>>>> controller that can control some servos and relays to control a few things >>>>> in a comm building. Basically be able to turn the lights on and off, >>>>> monitor the temperature, turn on a heater, and control a magnetic door >>>>> lock. The products are all lined out for controlling each of those but we >>>>> need a controller that can deal with the IO and be able to be run from a >>>>> webpage. >>>>> >>>>> My first though was Arduino or Beagleboard. Anyone have any experience >>>>> with these things that could recommend a platform to build off of? The >>>>> basic requirements are ethernet interface, a number of digital and analog >>>>> IO connections and the ability to communicate with a web-server backend. >>>>> >>>>> -Ty >>>>> >>>> >>>> >>> >>> >> >>
Re: [AFMUG] development platform for data/control system
You could use a PLC. I have used microcontrollers for years but am too lazy these days. If you don’t like sitemonitor, RMS makes a nice telemetry board too. From: Ty Featherling via Af Sent: Thursday, November 06, 2014 1:44 PM To: af@afmug.com Subject: Re: [AFMUG] development platform for data/control system Good point Chuck. Just use SNMP for the data. Keefe, I'm sorry but I have zero faith that mFi will be around for all that long. How long since launch and it hasn't been updated or spoken of again? You can only just now get parts without months of waiting. Cameron, I will look into that thanks. Anyone else have any thoughts on microcontollers? -Ty On Thu, Nov 6, 2014 at 2:29 PM, Chuck McCown via Af wrote: You could do much of this with a site monitor. From: Cameron Crum via Af Sent: Thursday, November 06, 2014 1:26 PM To: af@afmug.com Subject: Re: [AFMUG] development platform for data/control system Sorry, forgot the link http://www.embeddedcontrolconcepts.com/products.html On Thu, Nov 6, 2014 at 2:24 PM, Cameron Crum via Af wrote: How many IO connections? I use a BCS-460 for my little brewery. It was designed with brewers in mind, but could be used for any application needing web based control for relays and such. There are a couple models with different numbers of inputs and outputs, has a built in web server for controlling it all, and they have an API so you could write your own. I wrote an andoid app called Brew Mate on the android market so I can use my phone with it. It might be worth looking at before re-inventing the wheel. Cameron On Thu, Nov 6, 2014 at 2:14 PM, Ty Featherling via Af wrote: I have been asked what the feasibility is of us developing a controller that can control some servos and relays to control a few things in a comm building. Basically be able to turn the lights on and off, monitor the temperature, turn on a heater, and control a magnetic door lock. The products are all lined out for controlling each of those but we need a controller that can deal with the IO and be able to be run from a webpage. My first though was Arduino or Beagleboard. Anyone have any experience with these things that could recommend a platform to build off of? The basic requirements are ethernet interface, a number of digital and analog IO connections and the ability to communicate with a web-server backend. -Ty
Re: [AFMUG] development platform for data/control system
Look at Direct Automation for one . Jaime Solorza On Nov 6, 2014 1:44 PM, "Ty Featherling via Af" wrote: > Good point Chuck. Just use SNMP for the data. Keefe, I'm sorry but I have > zero faith that mFi will be around for all that long. How long since launch > and it hasn't been updated or spoken of again? You can only just now get > parts without months of waiting. > > Cameron, I will look into that thanks. > > Anyone else have any thoughts on microcontollers? > > -Ty > > On Thu, Nov 6, 2014 at 2:29 PM, Chuck McCown via Af wrote: > >> You could do much of this with a site monitor. >> >> *From:* Cameron Crum via Af >> *Sent:* Thursday, November 06, 2014 1:26 PM >> *To:* af@afmug.com >> *Subject:* Re: [AFMUG] development platform for data/control system >> >> Sorry, forgot the link >> http://www.embeddedcontrolconcepts.com/products.html >> >> On Thu, Nov 6, 2014 at 2:24 PM, Cameron Crum via Af wrote: >> >>> How many IO connections? I use a BCS-460 for my little brewery. It was >>> designed with brewers in mind, but could be used for any application >>> needing web based control for relays and such. There are a couple models >>> with different numbers of inputs and outputs, has a built in web server for >>> controlling it all, and they have an API so you could write your own. I >>> wrote an andoid app called Brew Mate on the android market so I can use my >>> phone with it. It might be worth looking at before re-inventing the wheel. >>> >>> Cameron >>> >>> On Thu, Nov 6, 2014 at 2:14 PM, Ty Featherling via Af >>> wrote: >>> >>>> I have been asked what the feasibility is of us developing a controller >>>> that can control some servos and relays to control a few things in a comm >>>> building. Basically be able to turn the lights on and off, monitor the >>>> temperature, turn on a heater, and control a magnetic door lock. The >>>> products are all lined out for controlling each of those but we need a >>>> controller that can deal with the IO and be able to be run from a webpage. >>>> >>>> My first though was Arduino or Beagleboard. Anyone have any experience >>>> with these things that could recommend a platform to build off of? The >>>> basic requirements are ethernet interface, a number of digital and analog >>>> IO connections and the ability to communicate with a web-server backend. >>>> >>>> -Ty >>>> >>> >>> >> >> > >
Re: [AFMUG] development platform for data/control system
SiteMonitor could do it. On 11/6/2014 2:14 PM, Ty Featherling via Af wrote: I have been asked what the feasibility is of us developing a controller that can control some servos and relays to control a few things in a comm building. Basically be able to turn the lights on and off, monitor the temperature, turn on a heater, and control a magnetic door lock. The products are all lined out for controlling each of those but we need a controller that can deal with the IO and be able to be run from a webpage. My first though was Arduino or Beagleboard. Anyone have any experience with these things that could recommend a platform to build off of? The basic requirements are ethernet interface, a number of digital and analog IO connections and the ability to communicate with a web-server backend. -Ty
Re: [AFMUG] development platform for data/control system
Ever look at the X10 home automation system? Maybe not enough doodads for what you're looking for,but there are a lot of capabilities built into it. http://www.x10.com/x10-home-automation.html bp On 11/6/2014 12:14 PM, Ty Featherling via Af wrote: I have been asked what the feasibility is of us developing a controller that can control some servos and relays to control a few things in a comm building. Basically be able to turn the lights on and off, monitor the temperature, turn on a heater, and control a magnetic door lock. The products are all lined out for controlling each of those but we need a controller that can deal with the IO and be able to be run from a webpage. My first though was Arduino or Beagleboard. Anyone have any experience with these things that could recommend a platform to build off of? The basic requirements are ethernet interface, a number of digital and analog IO connections and the ability to communicate with a web-server backend. -Ty
Re: [AFMUG] development platform for data/control system
Good point Chuck. Just use SNMP for the data. Keefe, I'm sorry but I have zero faith that mFi will be around for all that long. How long since launch and it hasn't been updated or spoken of again? You can only just now get parts without months of waiting. Cameron, I will look into that thanks. Anyone else have any thoughts on microcontollers? -Ty On Thu, Nov 6, 2014 at 2:29 PM, Chuck McCown via Af wrote: > You could do much of this with a site monitor. > > *From:* Cameron Crum via Af > *Sent:* Thursday, November 06, 2014 1:26 PM > *To:* af@afmug.com > *Subject:* Re: [AFMUG] development platform for data/control system > > Sorry, forgot the link > http://www.embeddedcontrolconcepts.com/products.html > > On Thu, Nov 6, 2014 at 2:24 PM, Cameron Crum via Af wrote: > >> How many IO connections? I use a BCS-460 for my little brewery. It was >> designed with brewers in mind, but could be used for any application >> needing web based control for relays and such. There are a couple models >> with different numbers of inputs and outputs, has a built in web server for >> controlling it all, and they have an API so you could write your own. I >> wrote an andoid app called Brew Mate on the android market so I can use my >> phone with it. It might be worth looking at before re-inventing the wheel. >> >> Cameron >> >> On Thu, Nov 6, 2014 at 2:14 PM, Ty Featherling via Af >> wrote: >> >>> I have been asked what the feasibility is of us developing a controller >>> that can control some servos and relays to control a few things in a comm >>> building. Basically be able to turn the lights on and off, monitor the >>> temperature, turn on a heater, and control a magnetic door lock. The >>> products are all lined out for controlling each of those but we need a >>> controller that can deal with the IO and be able to be run from a webpage. >>> >>> My first though was Arduino or Beagleboard. Anyone have any experience >>> with these things that could recommend a platform to build off of? The >>> basic requirements are ethernet interface, a number of digital and analog >>> IO connections and the ability to communicate with a web-server backend. >>> >>> -Ty >>> >> >> > >
Re: [AFMUG] development platform for data/control system
You could do much of this with a site monitor. From: Cameron Crum via Af Sent: Thursday, November 06, 2014 1:26 PM To: af@afmug.com Subject: Re: [AFMUG] development platform for data/control system Sorry, forgot the link http://www.embeddedcontrolconcepts.com/products.html On Thu, Nov 6, 2014 at 2:24 PM, Cameron Crum via Af wrote: How many IO connections? I use a BCS-460 for my little brewery. It was designed with brewers in mind, but could be used for any application needing web based control for relays and such. There are a couple models with different numbers of inputs and outputs, has a built in web server for controlling it all, and they have an API so you could write your own. I wrote an andoid app called Brew Mate on the android market so I can use my phone with it. It might be worth looking at before re-inventing the wheel. Cameron On Thu, Nov 6, 2014 at 2:14 PM, Ty Featherling via Af wrote: I have been asked what the feasibility is of us developing a controller that can control some servos and relays to control a few things in a comm building. Basically be able to turn the lights on and off, monitor the temperature, turn on a heater, and control a magnetic door lock. The products are all lined out for controlling each of those but we need a controller that can deal with the IO and be able to be run from a webpage. My first though was Arduino or Beagleboard. Anyone have any experience with these things that could recommend a platform to build off of? The basic requirements are ethernet interface, a number of digital and analog IO connections and the ability to communicate with a web-server backend. -Ty
Re: [AFMUG] development platform for data/control system
Ubiquiti Mfi On 11/6/2014 2:14 PM, Ty Featherling via Af wrote: I have been asked what the feasibility is of us developing a controller that can control some servos and relays to control a few things in a comm building. Basically be able to turn the lights on and off, monitor the temperature, turn on a heater, and control a magnetic door lock. The products are all lined out for controlling each of those but we need a controller that can deal with the IO and be able to be run from a webpage. My first though was Arduino or Beagleboard. Anyone have any experience with these things that could recommend a platform to build off of? The basic requirements are ethernet interface, a number of digital and analog IO connections and the ability to communicate with a web-server backend. -Ty
Re: [AFMUG] development platform for data/control system
Sorry, forgot the link http://www.embeddedcontrolconcepts.com/products.html On Thu, Nov 6, 2014 at 2:24 PM, Cameron Crum via Af wrote: > How many IO connections? I use a BCS-460 for my little brewery. It was > designed with brewers in mind, but could be used for any application > needing web based control for relays and such. There are a couple models > with different numbers of inputs and outputs, has a built in web server for > controlling it all, and they have an API so you could write your own. I > wrote an andoid app called Brew Mate on the android market so I can use my > phone with it. It might be worth looking at before re-inventing the wheel. > > Cameron > > On Thu, Nov 6, 2014 at 2:14 PM, Ty Featherling via Af > wrote: > >> I have been asked what the feasibility is of us developing a controller >> that can control some servos and relays to control a few things in a comm >> building. Basically be able to turn the lights on and off, monitor the >> temperature, turn on a heater, and control a magnetic door lock. The >> products are all lined out for controlling each of those but we need a >> controller that can deal with the IO and be able to be run from a webpage. >> >> My first though was Arduino or Beagleboard. Anyone have any experience >> with these things that could recommend a platform to build off of? The >> basic requirements are ethernet interface, a number of digital and analog >> IO connections and the ability to communicate with a web-server backend. >> >> -Ty >> > >
Re: [AFMUG] development platform for data/control system
How many IO connections? I use a BCS-460 for my little brewery. It was designed with brewers in mind, but could be used for any application needing web based control for relays and such. There are a couple models with different numbers of inputs and outputs, has a built in web server for controlling it all, and they have an API so you could write your own. I wrote an andoid app called Brew Mate on the android market so I can use my phone with it. It might be worth looking at before re-inventing the wheel. Cameron On Thu, Nov 6, 2014 at 2:14 PM, Ty Featherling via Af wrote: > I have been asked what the feasibility is of us developing a controller > that can control some servos and relays to control a few things in a comm > building. Basically be able to turn the lights on and off, monitor the > temperature, turn on a heater, and control a magnetic door lock. The > products are all lined out for controlling each of those but we need a > controller that can deal with the IO and be able to be run from a webpage. > > My first though was Arduino or Beagleboard. Anyone have any experience > with these things that could recommend a platform to build off of? The > basic requirements are ethernet interface, a number of digital and analog > IO connections and the ability to communicate with a web-server backend. > > -Ty >
[AFMUG] development platform for data/control system
I have been asked what the feasibility is of us developing a controller that can control some servos and relays to control a few things in a comm building. Basically be able to turn the lights on and off, monitor the temperature, turn on a heater, and control a magnetic door lock. The products are all lined out for controlling each of those but we need a controller that can deal with the IO and be able to be run from a webpage. My first though was Arduino or Beagleboard. Anyone have any experience with these things that could recommend a platform to build off of? The basic requirements are ethernet interface, a number of digital and analog IO connections and the ability to communicate with a web-server backend. -Ty