Re: [AFMUG] Cisco Router VLAN
Cisco speak: Untagged: switchport mode access switchport access vlan 10 Tagged: switchport mode trunk switchport trunk allowed vlan 20 switchport trunk encapsulation dot1q Mixed mode: switchport trunk encapsulation dot1q switchport mode trunk switchport trunk allowed vlan 10,20 (tagged) switchport trunk native vlan 10 (untagged) On Wed, Mar 4, 2015 at 2:43 PM, Jason McKemie < j.mcke...@veloxinetbroadband.com> wrote: > Gotcha. Thanks for the info, I'll give that a try. It appears that I > have to use Cisco in this particular instance unfortunately... > > On Wed, Mar 4, 2015 at 1:42 PM, George Skorup (Cyber Broadcasting) < > geo...@cbcast.com> wrote: > >> That would make it untagged. I think dot1q on the physical interface and >> then dot1q sub-interfaces would give you QinQ. Never tried it. I don't have >> much Cisco VLAN experience outside of switching. Mikrotik is so much >> easier.. and cheaper. :) >> >> On 3/4/2015 2:11 AM, Jason McKemie wrote: >> >> What does "native" at the end of the command do? I also discovered that >> when I use the vlan-id dot1q command on the physical interface, as >> well as putting the IP address there, I can ping. Not sure what the >> disconnect with the sub interface is... >> >> On Wednesday, March 4, 2015, George Skorup (Cyber Broadcasting) < >> geo...@cbcast.com> wrote: >> >>> encapsulation dot1q native? Unless I'm confused what you're >>> asking for... >>> >>> On 3/4/2015 1:28 AM, Jason McKemie wrote: >>> If I have an incoming VLAN tag that I want to strip on a Cisco router, how would I do so? I've got a sub interface configured on the physical interface where the VLAN enters the router, the correct VLAN number, and an IP address on the same network as the device at the other end of the cable configured on the sub interface. Still unable to ping anything. Is there a command I'm missing here? I had a Mikrotik router in the same location that I currently have the Cisco and didn't have any issues. >>> >>> >> >
Re: [AFMUG] Cisco Router VLAN
Gotcha. Thanks for the info, I'll give that a try. It appears that I have to use Cisco in this particular instance unfortunately... On Wed, Mar 4, 2015 at 1:42 PM, George Skorup (Cyber Broadcasting) < geo...@cbcast.com> wrote: > That would make it untagged. I think dot1q on the physical interface and > then dot1q sub-interfaces would give you QinQ. Never tried it. I don't have > much Cisco VLAN experience outside of switching. Mikrotik is so much > easier.. and cheaper. :) > > On 3/4/2015 2:11 AM, Jason McKemie wrote: > > What does "native" at the end of the command do? I also discovered that > when I use the vlan-id dot1q command on the physical interface, as > well as putting the IP address there, I can ping. Not sure what the > disconnect with the sub interface is... > > On Wednesday, March 4, 2015, George Skorup (Cyber Broadcasting) < > geo...@cbcast.com> wrote: > >> encapsulation dot1q native? Unless I'm confused what you're >> asking for... >> >> On 3/4/2015 1:28 AM, Jason McKemie wrote: >> >>> If I have an incoming VLAN tag that I want to strip on a Cisco router, >>> how would I do so? I've got a sub interface configured on the physical >>> interface where the VLAN enters the router, the correct VLAN number, and an >>> IP address on the same network as the device at the other end of the cable >>> configured on the sub interface. Still unable to ping anything. Is there a >>> command I'm missing here? I had a Mikrotik router in the same location that >>> I currently have the Cisco and didn't have any issues. >>> >> >> >
Re: [AFMUG] Cisco Router VLAN
That would make it untagged. I think dot1q on the physical interface and then dot1q sub-interfaces would give you QinQ. Never tried it. I don't have much Cisco VLAN experience outside of switching. Mikrotik is so much easier.. and cheaper. :) On 3/4/2015 2:11 AM, Jason McKemie wrote: What does "native" at the end of the command do? I also discovered that when I use the vlan-id dot1q command on the physical interface, as well as putting the IP address there, I can ping. Not sure what the disconnect with the sub interface is... On Wednesday, March 4, 2015, George Skorup (Cyber Broadcasting) mailto:geo...@cbcast.com>> wrote: encapsulation dot1q native? Unless I'm confused what you're asking for... On 3/4/2015 1:28 AM, Jason McKemie wrote: If I have an incoming VLAN tag that I want to strip on a Cisco router, how would I do so? I've got a sub interface configured on the physical interface where the VLAN enters the router, the correct VLAN number, and an IP address on the same network as the device at the other end of the cable configured on the sub interface. Still unable to ping anything. Is there a command I'm missing here? I had a Mikrotik router in the same location that I currently have the Cisco and didn't have any issues.
Re: [AFMUG] Cisco Router VLAN
What does "native" at the end of the command do? I also discovered that when I use the vlan-id dot1q command on the physical interface, as well as putting the IP address there, I can ping. Not sure what the disconnect with the sub interface is... On Wednesday, March 4, 2015, George Skorup (Cyber Broadcasting) < geo...@cbcast.com> wrote: > encapsulation dot1q native? Unless I'm confused what you're > asking for... > > On 3/4/2015 1:28 AM, Jason McKemie wrote: > >> If I have an incoming VLAN tag that I want to strip on a Cisco router, >> how would I do so? I've got a sub interface configured on the physical >> interface where the VLAN enters the router, the correct VLAN number, and an >> IP address on the same network as the device at the other end of the cable >> configured on the sub interface. Still unable to ping anything. Is there a >> command I'm missing here? I had a Mikrotik router in the same location that >> I currently have the Cisco and didn't have any issues. >> > >
Re: [AFMUG] Cisco Router VLAN
encapsulation dot1q native? Unless I'm confused what you're asking for... On 3/4/2015 1:28 AM, Jason McKemie wrote: If I have an incoming VLAN tag that I want to strip on a Cisco router, how would I do so? I've got a sub interface configured on the physical interface where the VLAN enters the router, the correct VLAN number, and an IP address on the same network as the device at the other end of the cable configured on the sub interface. Still unable to ping anything. Is there a command I'm missing here? I had a Mikrotik router in the same location that I currently have the Cisco and didn't have any issues.
