Re: [Alsa-user] problem installing alsa-1.0.14 on Debian etch
Am Sonntag, 25. Februar 2007 22:06 schrieb Steve Kleene: > References: <[EMAIL PROTECTED]> > <[EMAIL PROTECTED]> > > On 25 Feb 2007 09:42:58 -0500, I wrote: > > I have no sound on my recent installation of Debian etch with > > alsa-1.0.13. ... The sound is on the Intel motherboard (chipset ICH7). > > On 25 Feb 2007 16:47:05 +0100, Benjamin Eikel replied: > > I needed the 1.0.14 version too but I only installed the alsa-base > > package from experimental [1] and compiled the alsa-lib package from > > alsa-project.org. I did not create a Debian package from alsa-lib but > > installed it with make. This worked for me. > > > > [1] http://packages.debian.org/experimental/sound/alsa-base > > I have sound now. As you suggested, I put in the alsa-base 1.0.14-rc1 from > Debian experimental and alsa-lib and alsa-driver 1.0.14rc2 from source. I > made deb files of these but couldn't install them that way because of > conflicts. It didn't work with just alsa-lib. I had to install > alsa-driver and run alsaconf. > > I'm a little worried what sort of mess I'll have when it comes time to > upgrade any of the debian packages involved. dpkg still shows libasound2 > 1.0.13-1 installed, but many of those files were overwritten by the install > of alsa-lib from source. alsa-driver replaced files from the package > linux-image-2.6.18-3-686 and a couple of others. I did save archives of > the original files but don't know if that will be enough. Yes I will have the same problems when new versions will be released. But I am just hoping that the new packages overwrite the right files. ;-) Maybe there is something like a "make uninstall" option in the sources. > > Anyway, I do have sound now. Thanks, Benjamin. I think this was not an optimal solution. Anyway, you're welcome! Regards, Benjamin - Take Surveys. Earn Cash. Influence the Future of IT Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT & business topics through brief surveys-and earn cash http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV ___ Alsa-user mailing list Alsa-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/alsa-user
Re: [Alsa-user] problem installing alsa-1.0.14 on Debian etch
References: <[EMAIL PROTECTED]> <[EMAIL PROTECTED]> On 25 Feb 2007 09:42:58 -0500, I wrote: > I have no sound on my recent installation of Debian etch with alsa-1.0.13. > ... The sound is on the Intel motherboard (chipset ICH7). On 25 Feb 2007 16:47:05 +0100, Benjamin Eikel replied: > I needed the 1.0.14 version too but I only installed the alsa-base package > from experimental [1] and compiled the alsa-lib package from > alsa-project.org. I did not create a Debian package from alsa-lib but > installed it with make. This worked for me. > > [1] http://packages.debian.org/experimental/sound/alsa-base I have sound now. As you suggested, I put in the alsa-base 1.0.14-rc1 from Debian experimental and alsa-lib and alsa-driver 1.0.14rc2 from source. I made deb files of these but couldn't install them that way because of conflicts. It didn't work with just alsa-lib. I had to install alsa-driver and run alsaconf. I'm a little worried what sort of mess I'll have when it comes time to upgrade any of the debian packages involved. dpkg still shows libasound2 1.0.13-1 installed, but many of those files were overwritten by the install of alsa-lib from source. alsa-driver replaced files from the package linux-image-2.6.18-3-686 and a couple of others. I did save archives of the original files but don't know if that will be enough. Anyway, I do have sound now. Thanks, Benjamin. - Take Surveys. Earn Cash. Influence the Future of IT Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT & business topics through brief surveys-and earn cash http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV ___ Alsa-user mailing list Alsa-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/alsa-user
Re: [Alsa-user] problem installing alsa-1.0.14 on Debian etch
Am Sonntag, 25. Februar 2007 15:42 schrieb Steve Kleene: > I have no sound on my recent installation of Debian etch with alsa-1.0.13. > I do have sound when I boot off the XP partition. The sound is on the > Intel motherboard (chipset ICH7). In the debian-user mailing list, it was > recently stated that the hda-intel driver for alsa-1.0.11 had some > problems. (It didn't comment on 1.0.13.) So I thought I'd try to bring up > 1.0.14. To preserve the Debian package management, I used checkinstall. I needed the 1.0.14 version too but I only installed the alsa-base package from experimental [1] and compiled the alsa-lib package from alsa-project.org. I did not create a Debian package from alsa-lib but installed it with make. This worked for me. [1] http://packages.debian.org/experimental/sound/alsa-base > > 1.0.14 isn't available from Debian yet. So I tried to install alsa-driver, > alsa-lib, and alsa-utils, all the newest versions (1.0.14rc2) from > alsa-project.org. The first two compiled successfully but gave conflicts > when I tested their installation. > > When I ran for alsa-driver > > checkinstall -D make install-modules > > I got the following conflict: > trying to ovewrite `/lib/modules/2.6.18-3-686/modules.isapnpmap, which \ > is also in package linux-image-2.6.18-3-686 > > When I ran for alsa-lib > > checkinstall -D make install > > I got the following conflict: > trying to ovewrite `/usr/bin/nm`, which is also in package binutils > > alsa-utils wouldn't compile because it needs the newer alsa-lib. > > I'd appreciate any advice on where to go from here. I don't know what > might get screwed up if I overwrite modules.isapnpmap or /usr/bin/nm. I'm > also not even certain that updating alsa would fix the sound problem. If > necessary, I could just live without sound until 1.0.14 makes it to etch. > > Thanks. > > > - > Take Surveys. Earn Cash. Influence the Future of IT > Join SourceForge.net's Techsay panel and you'll get the chance to share > your opinions on IT & business topics through brief surveys-and earn cash > http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV > ___ > Alsa-user mailing list > Alsa-user@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/alsa-user - Take Surveys. Earn Cash. Influence the Future of IT Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT & business topics through brief surveys-and earn cash http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV ___ Alsa-user mailing list Alsa-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/alsa-user
Re: [Alsa-user] problem installing alsa-1.0.14 on Debian etch
Am Sonntag, 25. Februar 2007 15:42 schrieb Steve Kleene: > I have no sound on my recent installation of Debian etch with alsa-1.0.13. > I do have sound when I boot off the XP partition. The sound is on the > Intel motherboard (chipset ICH7). In the debian-user mailing list, it was > recently stated that the hda-intel driver for alsa-1.0.11 had some > problems. (It didn't comment on 1.0.13.) So I thought I'd try to bring up > 1.0.14. To preserve the Debian package management, I used checkinstall. I needed the 1.0.14 version too but I only installed the alsa-base package from experimental [1] and compiled the alsa-lib package from alsa-project.org. I did not create a Debian package from alsa-lib but installed it with make. This worked for me. [1] http://packages.debian.org/experimental/sound/alsa-base > > 1.0.14 isn't available from Debian yet. So I tried to install alsa-driver, > alsa-lib, and alsa-utils, all the newest versions (1.0.14rc2) from > alsa-project.org. The first two compiled successfully but gave conflicts > when I tested their installation. > > When I ran for alsa-driver > > checkinstall -D make install-modules > > I got the following conflict: > trying to ovewrite `/lib/modules/2.6.18-3-686/modules.isapnpmap, which \ > is also in package linux-image-2.6.18-3-686 > > When I ran for alsa-lib > > checkinstall -D make install > > I got the following conflict: > trying to ovewrite `/usr/bin/nm`, which is also in package binutils > > alsa-utils wouldn't compile because it needs the newer alsa-lib. > > I'd appreciate any advice on where to go from here. I don't know what > might get screwed up if I overwrite modules.isapnpmap or /usr/bin/nm. I'm > also not even certain that updating alsa would fix the sound problem. If > necessary, I could just live without sound until 1.0.14 makes it to etch. > > Thanks. > > > - > Take Surveys. Earn Cash. Influence the Future of IT > Join SourceForge.net's Techsay panel and you'll get the chance to share > your opinions on IT & business topics through brief surveys-and earn cash > http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV > ___ > Alsa-user mailing list > Alsa-user@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/alsa-user - Take Surveys. Earn Cash. Influence the Future of IT Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT & business topics through brief surveys-and earn cash http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV ___ Alsa-user mailing list Alsa-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/alsa-user
[Alsa-user] problem installing alsa-1.0.14 on Debian etch
I have no sound on my recent installation of Debian etch with alsa-1.0.13. I do have sound when I boot off the XP partition. The sound is on the Intel motherboard (chipset ICH7). In the debian-user mailing list, it was recently stated that the hda-intel driver for alsa-1.0.11 had some problems. (It didn't comment on 1.0.13.) So I thought I'd try to bring up 1.0.14. To preserve the Debian package management, I used checkinstall. 1.0.14 isn't available from Debian yet. So I tried to install alsa-driver, alsa-lib, and alsa-utils, all the newest versions (1.0.14rc2) from alsa-project.org. The first two compiled successfully but gave conflicts when I tested their installation. When I ran for alsa-driver checkinstall -D make install-modules I got the following conflict: trying to ovewrite `/lib/modules/2.6.18-3-686/modules.isapnpmap, which \ is also in package linux-image-2.6.18-3-686 When I ran for alsa-lib checkinstall -D make install I got the following conflict: trying to ovewrite `/usr/bin/nm`, which is also in package binutils alsa-utils wouldn't compile because it needs the newer alsa-lib. I'd appreciate any advice on where to go from here. I don't know what might get screwed up if I overwrite modules.isapnpmap or /usr/bin/nm. I'm also not even certain that updating alsa would fix the sound problem. If necessary, I could just live without sound until 1.0.14 makes it to etch. Thanks. - Take Surveys. Earn Cash. Influence the Future of IT Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT & business topics through brief surveys-and earn cash http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV ___ Alsa-user mailing list Alsa-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/alsa-user