Re: [AMRadio] FCC engineers
That is nothing but B.S. What the hell is wrong with all of the right wing nut jobs? Does everything have to be political? This is a ham radio reflector. I'm sick of this crap. Darrell, WA5VGO On 3/22/2010 7:36 AM, CL in NC wrote: > One of Bill Clinton's endeavors with the federal government was to change it > to a social club of sorts. It became necessary to hire as needed, > individuals who would fill out the social makeup of gender, race, and sexual > orientation. If a highly qualified Caucasian male was hired or promoted, a > letter had to be written, outlining why any member of the aforementioned > groups, was not selected for a position. Today, in many technical jobs the > government is involved in, management and upper management meets the social > goals, but are mostly full of incompetents. The FCC is in that group. So is > the FAA, which is a good reason to drive yourself or take the train. > > Charlie, W4MEC in NC > > > > __ Our Main Website: http://www.amfone.net AMRadio mailing list Searchable Archives: http://www.mail-archive.com/amradio@mailman.qth.net/ List Rules (must read!): http://w5ami.net/amradiofaq.html List Home: http://mailman.qth.net/mailman/listinfo/amradio Post: AMRadio@mailman.qth.net To unsubscribe, send an email to amradio-requ...@mailman.qth.net with the word unsubscribe in the message body. This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [AMRadio] Ham mods (was Re:SP600 Question) ]
Jim, You stole my thunder. Negative feedback is a very effective way of reducing distortion and smoothing frequency response. It was used in the Ranger to reduce the effective plate resistance of the 1614's so that it would work well as a speech amplifier for a larger modulator (such as the 810's in the Johnson Kilowatt). Darrell, WA5VGO At 01:42 PM 9/15/2009 -0500, you wrote: >The method of negative feedback in the audio section of the Ranger is >unique and very effective. > >Jim/W5JO > >- Original Message - > > > > >I wonder why the Ranger would be among the best stock audio and the > > Valiant among the worst? Same maker, same vintage, etc. > > > > 73 de W3NU ___ No viruses found in this outgoing message Scanned by iolo AntiVirus 1.5.8.3 http://www.iolo.com __ Our Main Website: http://www.amfone.net AMRadio mailing list Searchable Archives: http://www.mail-archive.com/amradio@mailman.qth.net/ List Rules (must read!): http://w5ami.net/amradiofaq.html List Home: http://mailman.qth.net/mailman/listinfo/amradio Post: AMRadio@mailman.qth.net To unsubscribe, send an email to amradio-requ...@mailman.qth.net with the word unsubscribe in the message body. This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [AMRadio] Relay Voltage ID
Bear in mind, that what really matters here is the coil resistance, not the voltage rating of the relay coil. If the coil resistance is substantially different, it will upset the voltage divider. If you use more than one relay, it could really upset things. A 110 VDC relay generally has a coil resistance of about 10K. If you can find one of these (they are still manufactured) it should work fine. Darrell, WA5VGO The coil for K301 is fed from the low voltage power supply thru the voltage divider R309 & R310. The low voltage is 240 volts. I come up with 96 volts on the coil. Darrell, WA5VGO ___ No viruses found in this outgoing message Scanned by iolo AntiVirus 1.5.7.1 http://www.iolo.com __ Our Main Website: http://www.amfone.net AMRadio mailing list Searchable Archives: http://www.mail-archive.com/amradio@mailman.qth.net/ List Rules (must read!): http://w5ami.net/amradiofaq.html List Home: http://mailman.qth.net/mailman/listinfo/amradio Post: AMRadio@mailman.qth.net To unsubscribe, send an email to amradio-requ...@mailman.qth.net with the word unsubscribe in the message body. This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [AMRadio] Relay Voltage ID
The coil for K301 is fed from the low voltage power supply thru the voltage divider R309 & R310. The low voltage is 240 volts. I come up with 96 volts on the coil. Darrell, WA5VGO At 05:09 PM 7/3/2009 -0500, w...@bellsouth.net wrote: >Thanks Darrell. I am no expert but I was thinking in that AC >neighborhood, but wanted to make sure. I'm having to replace the voltage >relay K301 in my Collins 32V-2 with a generic relay array setup it >seems. Just can't figure out why that old trusty relay went out after, >what, 50 years! Just don't make them like they use to do in the spark >days, you know HI. > >73 Robert W4RL > >--- On Fri, 7/3/09, WA5VGO wrote: > >From: WA5VGO >Subject: Re: [AMRadio] Relay Voltage ID >To: amradio@mailman.qth.net >Date: Friday, July 3, 2009, 4:53 PM > >The coil resistance strongly > suggests that it is 110 > VDC. > >Darrell, WA5VGO > > > >At 04:40 PM 7/3/2009 -0500, you wrote: > >Gentlemen, > > > >I've a Potter & Brumfield KR-2349-1 double pole single throw open frame > >relay. I am trying to find out the AC or DC voltage requirements as they > >are not marked on the coil. The coil measures 11.7 Kohms. Any help would > >be appreciated. I've already done a Google search with no results on this > >particular relay. Thanks in advance. > > > >73 and fly our Flag, > > > >Robert W4RL Pensacola FL > > >___ >No viruses found in this outgoing message >Scanned by iolo AntiVirus 1.5.7.1 >http://www.iolo.com > >__ >Our Main Website: http://www.amfone.net >AMRadio > mailing list >Searchable Archives: http://www.mail-archive.com/amradio@mailman.qth.net/ >List Rules (must read!): http://w5ami.net/amradiofaq.html >List Home: http://mailman.qth.net/mailman/listinfo/amradio >Post: AMRadio@mailman.qth.net >To unsubscribe, send an email to amradio-requ...@mailman.qth.net with >the word unsubscribe in the message body. > >This list hosted by: http://www.qsl.net >Please help support this email list: http://www.qsl.net/donate.html >__ >Our Main Website: http://www.amfone.net >AMRadio mailing list >Searchable Archives: http://www.mail-archive.com/amradio@mailman.qth.net/ >List Rules (must read!): http://w5ami.net/amradiofaq.html >List Home: http://mailman.qth.net/mailman/listinfo/amradio >Post: AMRadio@mailman.qth.net >To unsubscribe, send an email to amradio-requ...@mailman.qth.net with >the word unsubscribe in the message body. > >This list hosted by: http://www.qsl.net >Please help support this email list: http://www.qsl.net/donate.html > >___ >No viruses found in this incoming message >Scanned by iolo AntiVirus 1.5.7.1 >http://www.iolo.com ___ No viruses found in this outgoing message Scanned by iolo AntiVirus 1.5.7.1 http://www.iolo.com __ Our Main Website: http://www.amfone.net AMRadio mailing list Searchable Archives: http://www.mail-archive.com/amradio@mailman.qth.net/ List Rules (must read!): http://w5ami.net/amradiofaq.html List Home: http://mailman.qth.net/mailman/listinfo/amradio Post: AMRadio@mailman.qth.net To unsubscribe, send an email to amradio-requ...@mailman.qth.net with the word unsubscribe in the message body. This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [AMRadio] Relay Voltage ID
The coil resistance strongly suggests that it is 110 VDC. Darrell, WA5VGO At 04:40 PM 7/3/2009 -0500, you wrote: >Gentlemen, > >I've a Potter & Brumfield KR-2349-1 double pole single throw open frame >relay. I am trying to find out the AC or DC voltage requirements as they >are not marked on the coil. The coil measures 11.7 Kohms. Any help would >be appreciated. I've already done a Google search with no results on this >particular relay. Thanks in advance. > >73 and fly our Flag, > >Robert W4RL Pensacola FL ___ No viruses found in this outgoing message Scanned by iolo AntiVirus 1.5.7.1 http://www.iolo.com __ Our Main Website: http://www.amfone.net AMRadio mailing list Searchable Archives: http://www.mail-archive.com/amradio@mailman.qth.net/ List Rules (must read!): http://w5ami.net/amradiofaq.html List Home: http://mailman.qth.net/mailman/listinfo/amradio Post: AMRadio@mailman.qth.net To unsubscribe, send an email to amradio-requ...@mailman.qth.net with the word unsubscribe in the message body. This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [AMRadio] MJ comments
I am offended. Making fun of the deceased is disgusting ,shows a complete lack of class and has no place on an amateur radio forum. Darrell, WA5VGO At 01:38 PM 6/30/2009 -0500, you wrote: >I sure can't speak for others, but I wasn't in >the least offended... in fact, I'll join in! > >Farrah Fawcett met St. Peter at the Pearly Gates. >Peter said "You've led a righteous life, you're >welcome here. In fact, for leading a good life, >you're entitled to the granting of one wish". > >Farrah said "I wish that all children in the world would be safe". > >"Easily done", said Peter... and he immediately killed Michael Jackson! > > >Mr. T., W9LBB > > >At 00:40 29-06-09, you wrote: > > > > >If I offended anyone with my two jokes about MJ > >I apologize but I am not the one who went to 40 > >to discuss MJ, the following was from another > >poster and I thought that would be obvious from > >the little divots or whatever you call them on > >the left side. I would not want to discuss MJ > >with anyone especially on the air. I steer clear > >of politics and anything else controversial > >during QSO's and wish others would do the same > >and frankly I'm surprised at the reaction here, > >I work in mental health and have never seen > >anyone as sick as that guy. This is my last post > >on the subject, I just wanted to clear the air. > > > >73, > > > >Bob Young > >KB1OKL > > > > > > Thought I would check 40 yesterday and see if > > I could share my "grief" about > > > the tragic death of a weird, perverted child molester, > > > > > > > > > > > > > > >_ > >Insert movie times and more without leaving HotmailĀ®. > >http://windowslive.com/Tutorial/Hotmail/QuickAdd?ocid=TXT_TAGLM_WL_HM_Tut > orial_QuickAdd_062009 > >__ > >Our Main Website: http://www.amfone.net > >AMRadio mailing list > >Searchable Archives: http://www.mail-archive.com/amradio@mailman.qth.net/ > >List Rules (must read!): http://w5ami.net/amradiofaq.html > >List Home: http://mailman.qth.net/mailman/listinfo/amradio > >Post: AMRadio@mailman.qth.net > >To unsubscribe, send an email to amradio-requ...@mailman.qth.net with > >the word unsubscribe in the message body. > > > >This list hosted by: http://www.qsl.net > >Please help support this email list: http://www.qsl.net/donate.html > >__ >Our Main Website: http://www.amfone.net >AMRadio mailing list >Searchable Archives: http://www.mail-archive.com/amradio@mailman.qth.net/ >List Rules (must read!): http://w5ami.net/amradiofaq.html >List Home: http://mailman.qth.net/mailman/listinfo/amradio >Post: AMRadio@mailman.qth.net >To unsubscribe, send an email to amradio-requ...@mailman.qth.net with >the word unsubscribe in the message body. > >This list hosted by: http://www.qsl.net >Please help support this email list: http://www.qsl.net/donate.html > >___ >No viruses found in this incoming message >Scanned by iolo AntiVirus 1.5.7.1 >http://www.iolo.com ___ No viruses found in this outgoing message Scanned by iolo AntiVirus 1.5.7.1 http://www.iolo.com __ Our Main Website: http://www.amfone.net AMRadio mailing list Searchable Archives: http://www.mail-archive.com/amradio@mailman.qth.net/ List Rules (must read!): http://w5ami.net/amradiofaq.html List Home: http://mailman.qth.net/mailman/listinfo/amradio Post: AMRadio@mailman.qth.net To unsubscribe, send an email to amradio-requ...@mailman.qth.net with the word unsubscribe in the message body. This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[AMRadio] Content
Personally, I am sick of political and social comments on a forum supposedly devoted to ham radio. I'm ready for a one strike and you're out rule. 73, Darrell, WA5VGO ___ No viruses found in this outgoing message Scanned by iolo AntiVirus 1.5.7.1 http://www.iolo.com __ Our Main Website: http://www.amfone.net AMRadio mailing list Searchable Archives: http://www.mail-archive.com/amradio@mailman.qth.net/ List Rules (must read!): http://w5ami.net/amradiofaq.html List Home: http://mailman.qth.net/mailman/listinfo/amradio Post: AMRadio@mailman.qth.net To unsubscribe, send an email to amradio-requ...@mailman.qth.net with the word unsubscribe in the message body. This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [AMRadio] push pull output XFMRs and neg feedback
>Have you tried swapping the transformers to make sure it isn't something else? 73, Darrell, WA5VGO ___ No viruses found in this outgoing message Scanned by iolo AntiVirus 1.5.6.4 http://www.iolo.com __ Our Main Website: http://www.amfone.net AMRadio mailing list Searchable Archives: http://www.mail-archive.com/amradio@mailman.qth.net/ List Rules (must read!): http://w5ami.net/amradiofaq.html List Home: http://mailman.qth.net/mailman/listinfo/amradio Post: AMRadio@mailman.qth.net To unsubscribe, send an email to amradio-requ...@mailman.qth.net with the word unsubscribe in the message body. This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [AMRadio] Low Power AM?
At 02:46 PM 11/23/2008 -0600, Peter Markavage wrote: Why would RTTY operation be any different then AM operation? And with rigs like the Viking II, DX-100, Apache, etc., you can probably key down for many many minutes. i.e. "old buzzard transmission" which are quite common. Pete, wa2cwa You are. of course, absolutely right. Any plate modulated AM transmitter would be able to run RTTY at full power with no issues. In fact RTTY would place less stress on the transmitter because the peak power is 1/4 the peak AM power and there would be no need to provide power to the modulator. 73, Darrell, WA5VGO ___ No viruses found in this outgoing message Scanned by iolo AntiVirus 1.5.5.5 http://www.iolo.com __ Our Main Website: http://www.amfone.net AMRadio mailing list Searchable Archives: http://www.mail-archive.com/amradio@mailman.qth.net/ List Rules (must read!): http://w5ami.net/amradiofaq.html List Home: http://mailman.qth.net/mailman/listinfo/amradio Help: http://mailman.qth.net/mmfaq.html Post: mailto:AMRadio@mailman.qth.net To unsubscribe, send an email to [EMAIL PROTECTED] with the word unsubscribe in the message body.
Re: [AMRadio] RE: Fighting deed restrictions
That's a pretty cool idea to strike out offensive language that would limit a homebuyer's ability to establish antennas on the property. I seriously doubt that striking it would do any good unless it is initialed by BOTH parties. And if the real estate company was foolish enough to initial it, I believe your action would be against them, not the homeowners association. It would do nothing to prevent the association from enforcing the covenant. Darrell, WA5VGO ___ No viruses found in this outgoing message Scanned by iolo AntiVirus 1.5.4.5 http://www.iolo.com __ Our Main Website: http://www.amfone.net AMRadio mailing list Searchable Archives: http://www.mail-archive.com/amradio@mailman.qth.net/ List Rules (must read!): http://w5ami.net/amradiofaq.html List Home: http://mailman.qth.net/mailman/listinfo/amradio Help: http://mailman.qth.net/mmfaq.html Post: mailto:AMRadio@mailman.qth.net To unsubscribe, send an email to [EMAIL PROTECTED] with the word unsubscribe in the message body.
Re: [AMRadio] Merit C-2990 15h 75ma 400 ohm choke
How about a Hammond 157L? About $22 from Radio Daze. http://www.radiodaze.com/ 73, Darrell, WA5VGO At 06:39 AM 7/11/2008 -0500, you wrote: Does anyone have a Merit C-2990 15Henries 75mA 400 Ohms choke lying around in their junk box, I have had a meltdown on one of my radios and need this choke to rebuild, or equivalent Chicago tfmr co type. WHY. 73 Max ___ No viruses found in this outgoing message Scanned by iolo AntiVirus 1.5.4.5 http://www.iolo.com __ Our Main Website: http://www.amfone.net AMRadio mailing list Searchable Archives: http://www.mail-archive.com/amradio@mailman.qth.net/ List Rules (must read!): http://w5ami.net/amradiofaq.html List Home: http://mailman.qth.net/mailman/listinfo/amradio Help: http://mailman.qth.net/mmfaq.html Post: mailto:AMRadio@mailman.qth.net To unsubscribe, send an email to [EMAIL PROTECTED] with the word unsubscribe in the message body.
Re: [AMRadio] Whose on 7290 at 0215?
W8VYZ 73, Darrell, WA5VGO At 09:18 PM 5/12/2007 -0500, you wrote: I'm hearing a word or two from an AM station on 7290. I don't think it's a bc station, but it's way down in the noise. Mike Duke, K5XU American Council of Blind Radio Amateurs __ AMRadio mailing list List Rules (must read!): http://w5ami.net/amradiofaq.html List Home: http://mailman.qth.net/mailman/listinfo/amradio Partner Website: http://www.amfone.net Help: http://mailman.qth.net/mmfaq.html Post: mailto:AMRadio@mailman.qth.net To unsubscribe, send an email to [EMAIL PROTECTED] with the word unsubscribe in the message body. __ AMRadio mailing list List Rules (must read!): http://w5ami.net/amradiofaq.html List Home: http://mailman.qth.net/mailman/listinfo/amradio Partner Website: http://www.amfone.net Help: http://mailman.qth.net/mmfaq.html Post: mailto:AMRadio@mailman.qth.net To unsubscribe, send an email to [EMAIL PROTECTED] with the word unsubscribe in the message body.
Re: [AMRadio] 220 volt AC Power Question
This does not meet the code. A ground wire can never be used to carry load. Also, your ground wire is probably bare. A neutral conductor must be insulated. Darrell, WA5VGO At 07:09 PM 10/30/2006 -0600, you wrote: Hi all, I am building an amplifier that has a combination of 220 volt and 120 volt transformers. The HV plate supply is 220V, and the rest is 120V. I will be keying the plate supply. My 220V outlet has phase, phase, and ground. There is NO neutral. The outlet is not a GFCI outlet so ground current will work, BUT. The BUT here is whether this is legal with the National Electric Code? Before you say NO, consider the electric clothes dryer. These all run off 220V, and have 3 prong power cords. I have heard that in some dryers there are 120 volt loads (lights, and timer) as well as 220V (heater and motor). If this is true, then my approach must be OK so long as my power switch uses a DPST switch and (double fuses)to insure everything is off when it is in the OFF position. Comments please... BTW, I do have a 240/120 autotransformer of suitable size (VA rating), but space does not permit it's use. Jim JKO -- No virus found in this outgoing message. Checked by AVG Free Edition. __ AMRadio mailing list List Home: http://mailman.qth.net/mailman/listinfo/amradio Partner Website: http://www.amfone.net Help: http://mailman.qth.net/mmfaq.html Post: mailto:AMRadio@mailman.qth.net __ AMRadio mailing list List Home: http://mailman.qth.net/mailman/listinfo/amradio Partner Website: http://www.amfone.net Help: http://mailman.qth.net/mmfaq.html Post: mailto:AMRadio@mailman.qth.net
Re: [AMRadio] Phone band expansion
How do you find time for ham radio? I figure a guy of your caliber would be too busy with more important things. Like solving world hunger or finding a cure for cancer. At 09:23 PM 10/13/2006 -0400, you wrote: Anytime sport - Original Message - From: "Darrell, WA5VGO" <[EMAIL PROTECTED]> To: "Discussion of AM Radio in the Amateur Service" Sent: Friday, October 13, 2006 9:19 PM Subject: Re: [AMRadio] Phone band expansion Your a great guy, Bob. It's good to know I can go to you for ALL the answers. Darrell, WA5VGO At 07:35 PM 10/13/2006 -0400, you wrote: Plus, if he had half a brain, he would have upgraded to an Extra back in the late 60's, early 70's. It's sour grapes. I agree that a pre no-code Extra is more valuable than post no code but he missed the boat. My feeling is that my 20WPM Extra will always be worth more(to me at least) than a no code Extra. I've always felt that no code extras should sign /nc when in the Extra part of the bands. Bob W6TR - Original Message - From: "Donald Sanders" <[EMAIL PROTECTED]> To: "Discussion of AM Radio in the Amateur Service" Sent: Friday, October 13, 2006 6:56 PM Subject: Re: [AMRadio] Phone band expansion Because with your 1968 Advanced you cannot go to the Extra Only Frequencies. Healthfully yours, Don W4BWS - Original Message - From: "Darrell, WA5VGO" <[EMAIL PROTECTED]> To: "Discussion of AM Radio in the Amateur Service" Sent: Friday, October 13, 2006 5:27 PM Subject: Re: [AMRadio] Phone band expansion > On that subject, I can't >>understand why the Advanced hams don't go down and pass the Extra written >>exam, especially since the code requirements have been eliminated. >>My, >>it's so easy to get on radio these days. >> >>Bob W6TR Why would I want to downgrade from my 1968 advanced to the new extra? Darrell, WA5VGO __ AMRadio mailing list List Home: http://mailman.qth.net/mailman/listinfo/amradio Partner Website: http://www.amfone.net Help: http://mailman.qth.net/mmfaq.html Post: mailto:AMRadio@mailman.qth.net __ AMRadio mailing list List Home: http://mailman.qth.net/mailman/listinfo/amradio Partner Website: http://www.amfone.net Help: http://mailman.qth.net/mmfaq.html Post: mailto:AMRadio@mailman.qth.net __ AMRadio mailing list List Home: http://mailman.qth.net/mailman/listinfo/amradio Partner Website: http://www.amfone.net Help: http://mailman.qth.net/mmfaq.html Post: mailto:AMRadio@mailman.qth.net __ AMRadio mailing list List Home: http://mailman.qth.net/mailman/listinfo/amradio Partner Website: http://www.amfone.net Help: http://mailman.qth.net/mmfaq.html Post: mailto:AMRadio@mailman.qth.net __ AMRadio mailing list List Home: http://mailman.qth.net/mailman/listinfo/amradio Partner Website: http://www.amfone.net Help: http://mailman.qth.net/mmfaq.html Post: mailto:AMRadio@mailman.qth.net __ AMRadio mailing list List Home: http://mailman.qth.net/mailman/listinfo/amradio Partner Website: http://www.amfone.net Help: http://mailman.qth.net/mmfaq.html Post: mailto:AMRadio@mailman.qth.net
Re: [AMRadio] Phone band expansion
Your a great guy, Bob. It's good to know I can go to you for ALL the answers. Darrell, WA5VGO At 07:35 PM 10/13/2006 -0400, you wrote: Plus, if he had half a brain, he would have upgraded to an Extra back in the late 60's, early 70's. It's sour grapes. I agree that a pre no-code Extra is more valuable than post no code but he missed the boat. My feeling is that my 20WPM Extra will always be worth more(to me at least) than a no code Extra. I've always felt that no code extras should sign /nc when in the Extra part of the bands. Bob W6TR - Original Message - From: "Donald Sanders" <[EMAIL PROTECTED]> To: "Discussion of AM Radio in the Amateur Service" Sent: Friday, October 13, 2006 6:56 PM Subject: Re: [AMRadio] Phone band expansion Because with your 1968 Advanced you cannot go to the Extra Only Frequencies. Healthfully yours, Don W4BWS - Original Message - From: "Darrell, WA5VGO" <[EMAIL PROTECTED]> To: "Discussion of AM Radio in the Amateur Service" Sent: Friday, October 13, 2006 5:27 PM Subject: Re: [AMRadio] Phone band expansion > On that subject, I can't >>understand why the Advanced hams don't go down and pass the Extra written >>exam, especially since the code requirements have been eliminated. My, >>it's so easy to get on radio these days. >> >>Bob W6TR Why would I want to downgrade from my 1968 advanced to the new extra? Darrell, WA5VGO __ AMRadio mailing list List Home: http://mailman.qth.net/mailman/listinfo/amradio Partner Website: http://www.amfone.net Help: http://mailman.qth.net/mmfaq.html Post: mailto:AMRadio@mailman.qth.net __ AMRadio mailing list List Home: http://mailman.qth.net/mailman/listinfo/amradio Partner Website: http://www.amfone.net Help: http://mailman.qth.net/mmfaq.html Post: mailto:AMRadio@mailman.qth.net __ AMRadio mailing list List Home: http://mailman.qth.net/mailman/listinfo/amradio Partner Website: http://www.amfone.net Help: http://mailman.qth.net/mmfaq.html Post: mailto:AMRadio@mailman.qth.net __ AMRadio mailing list List Home: http://mailman.qth.net/mailman/listinfo/amradio Partner Website: http://www.amfone.net Help: http://mailman.qth.net/mmfaq.html Post: mailto:AMRadio@mailman.qth.net
Re: [AMRadio] Phone band expansion
On that subject, I can't understand why the Advanced hams don't go down and pass the Extra written exam, especially since the code requirements have been eliminated. My, it's so easy to get on radio these days. Bob W6TR Why would I want to downgrade from my 1968 advanced to the new extra? Darrell, WA5VGO __ AMRadio mailing list List Home: http://mailman.qth.net/mailman/listinfo/amradio Partner Website: http://www.amfone.net Help: http://mailman.qth.net/mmfaq.html Post: mailto:AMRadio@mailman.qth.net
Re: [AMRadio] AM on 3970?
No doubt you are hearing myself and Ronnie, K5WLT. We meet most Sundays on 3970 to avoid all of the congestion in the AM window. We both run 807 rigs with about 35 watts of carrier. 73, Darrell, WA5VGO At 09:29 AM 10/1/2006 -0500, you wrote: It's about 9:20 AM central time on Sunday morning as I write this. I'm normally not around the rig at this time. However, twice on Sundays when I have been here, I have found an AM qso on 3970. The signals are too weak into my Mississippi qth for me to pick out specific calls in order to determine where this activity is coming from. If you are part of that group, please know that you are at least being detected by someone whose ears perk up whenever an AM signal is located. Mike Duke, K5XU American Council of Blind Radio Amateurs __ AMRadio mailing list List Home: http://mailman.qth.net/mailman/listinfo/amradio Partner Website: http://www.amfone.net Help: http://mailman.qth.net/mmfaq.html Post: mailto:AMRadio@mailman.qth.net __ AMRadio mailing list List Home: http://mailman.qth.net/mailman/listinfo/amradio Partner Website: http://www.amfone.net Help: http://mailman.qth.net/mmfaq.html Post: mailto:AMRadio@mailman.qth.net
Re: [AMRadio] Xfmr
Can someone tell me what an "A 2920" transformer is or who manufactured it? It is supposed to be an audio (inner stage) transformer in a modulator. It shouldn't be critical. In almost any case, a 1:2 or 1:3 will work perfectly. Just make sure that the current rating on the primary winding is adequate. Are you sure it's an interstage transformer and not a driver transformer? 73, Darrell, WA5VGO __ AMRadio mailing list List Home: http://mailman.qth.net/mailman/listinfo/amradio Partner Website: http://www.amfone.net Help: http://mailman.qth.net/mmfaq.html Post: mailto:AMRadio@mailman.qth.net
Re: [AMRadio] Modulator design needed
The Apache does use a driver transformer. A triode connected 12BY7 is transformer coupled to the grids of the EL34's. For AB1 operation, look at any of the hi-fi type tubes (EL34, KT88, 6550, 8417, etc). Most will deliver plenty of power without grid current. Another good choice is the 6146. 807's don't do very well in AB1. They just can't deliver the power of many other tubes. 73, Darrell, WA5VGO
Re: [AMRadio] Rubber Feet
Lots of good suggestions for finding a source for rubber feet. John Lawson was certainly right about McMaster Carr. They have a good selection, and the prices are reasonable. Thanks for all the suggestions. 73, Darrell, WA5VGO
[AMRadio] Rubber Feet
What company has a good selection of rubber feet with screw mounting? All of the usual suppliers seem to have a very limited selection of mostly tiny self adhesive ones. 73, Darrell, WA5VGO
Re: [AMRadio] R-388 PTO info needed
I had the same problem several years ago. I found an open resistor in the PTO. Check the voltages on the two PTO tubes. You'll find the problem. 73, Darrell, WA5VGO At 04:47 PM 12/25/2005 -0500, you wrote: Further to my Xmas Eve Scrooge Radio Post - I have discovered that no signals of any kind appear on the PTO output cable when isolated from the mixer tube, and injecting the correct frequency into that pin of the mixer (from my bench oscillator) restores the radio to operation. So, of course, the PTO has quit, and the tubes (AFAIK) are good - but next I'll replace them with a couple that test out at better than 70% Gm - somehow I think that's not going to be the Problem. If anyone within the sound of my keyboard has any experience actually repairing this series of PTO - it's a Collins 70E-15 ser. M1751 - I'm trying to guage whether I should spend the time to dredge it out and fix it - or (since the front panel needs to be refinished) I would be better served by just bundling it off to someone and letting an expert refurb the radio. I do plan to keep it, it's my Fave Reciever - for Ham and SWL - Also: if you have a quote to perform the above, lemme know ASAP - I'm 'motivated' as they say in Real Estate. Cheers and Best of the Season! John KB6SCO __ AMRadio mailing list Home: http://mailman.qth.net/mailman/listinfo/amradio Help: http://mailman.qth.net/mmfaq.html Post: mailto:AMRadio@mailman.qth.net AMfone Website: http://www.amfone.net AM List Admin: Brian Sherrod/w5ami, Paul Courson/wa3vjb
RE: [AMRadio] Pi-Net vs Link Couple
Triodes are great for grounded grid, but for class C, why fight neutralization? Use a power grid tube. Sure you need a screen supply, but consider the paybacks. No neutralization; at least on the lower frequencies, and low drive requirements. I realize modulating it is a little trickier, but I've never had the Eimac system of placing a reactor in the screen supply to fail to do the trick. Darrell, WA5VGO
Re: [AMRadio] Power Resistor
It probably won't be cheap, but this guy probably has any resistor you need. http://minresistors.com/ 73, Darrell, WA5VGO
Re: [AMRadio] AM Amps
Got to be CW, RTTY, etc. With AM you would either melt the tube down or splatter all over the band. 73, Darrell, WA5VGO At 04:49 PM 1/13/2005 -0500, you wrote: How do you reduce the drive for AM? I take it that is how you operate CW? 73 Gary K4FMX James M. Walker wrote: Hum, 4-1000A G.G. amplifier, 3000 VDC plate, 700 MA Plate I, 500 MA Grid I, with 125 Watts out of DX-100 running apprx 2100 W input and dissipating 670 watts plate = approximately 1430 watts output! While the carrier level into 50 ohm dummy load is 1400 watts measured and a really NICE orange glow! This is with a 200 cfm blower, air system socket and chimney. Jim WB2FCN
RE: [AMRadio] AM Amps
Jim, If anyone believes that they don't need a good earth ground on their equipment, I'd be glad to set them straight. Darrell, WA5VGO At 06:07 PM 1/12/2005 -0600, you wrote: Darrell, That amp you built with the 4-1000 was a "killer" in more ways than one! Time for a confession.. Regards, Jim WD5JKO -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of Darrell, WA5VGO Sent: Tuesday, January 11, 2005 6:04 PM To: Discussion of AM Radio Subject: Re: [AMRadio] AM Amps At 04:21 PM 1/11/2005 -0500, you wrote: >In a message dated 1/11/05 12:14:43 PM, [EMAIL PROTECTED] writes: > > > > well all I can say is it works.. works well as a matter of fact, and has > > been for 6 years :) > > I typically run between 350 and 400 watts of carrier every day. It looks > > great on the scope. Modulation envelope is perfect. 100% modulation. In 6 > > years Ive only lost one tube, and I accidently broke that one. > > > > > >I have to agree with Gary. You're seeing 1600 watts PEP and 400W of carrier >OUT with a pair of GG 813s??? Does not compute! Just curious, are you >talking about 400W INPUT power to the linear under carrier only condx >maybe? If >so, this would work out to about 133W carrier OUT and each 813 dissipating >about 133W which would make more sense. > >Dennis D. W7QHO >Glendale, CA I'm with Dennis and Gary. To run a linear amplifier at 375 watts of carrier and 100% modulation, you will need around 800 watts of plate dissipation. For a short time a number of years ago, I tried running an AF-68 and a 4-1000A linear amplifier. I could never get more than around 450 watts of carrier and stay linearI didn't need a heater in the shack either. 73, Darrell, WA5VGO 73, Darrell, WA5VGO __ AMRadio mailing list Home: http://mailman.qth.net/mailman/listinfo/amradio Help: http://mailman.qth.net/mmfaq.html Post: mailto:AMRadio@mailman.qth.net -- No virus found in this incoming message. Checked by AVG Anti-Virus. Version: 7.0.300 / Virus Database: 265.6.10 - Release Date: 1/10/2005 -- No virus found in this outgoing message. Checked by AVG Anti-Virus. Version: 7.0.300 / Virus Database: 265.6.11 - Release Date: 1/12/2005 __ AMRadio mailing list Home: http://mailman.qth.net/mailman/listinfo/amradio Help: http://mailman.qth.net/mmfaq.html Post: mailto:AMRadio@mailman.qth.net
Re: [AMRadio] AM Amps
At 04:21 PM 1/11/2005 -0500, you wrote: In a message dated 1/11/05 12:14:43 PM, [EMAIL PROTECTED] writes: > well all I can say is it works.. works well as a matter of fact, and has > been for 6 years :) > I typically run between 350 and 400 watts of carrier every day. It looks > great on the scope. Modulation envelope is perfect. 100% modulation. In 6 > years Ive only lost one tube, and I accidently broke that one. > > I have to agree with Gary. You're seeing 1600 watts PEP and 400W of carrier OUT with a pair of GG 813s??? Does not compute! Just curious, are you talking about 400W INPUT power to the linear under carrier only condx maybe? If so, this would work out to about 133W carrier OUT and each 813 dissipating about 133W which would make more sense. Dennis D. W7QHO Glendale, CA I'm with Dennis and Gary. To run a linear amplifier at 375 watts of carrier and 100% modulation, you will need around 800 watts of plate dissipation. For a short time a number of years ago, I tried running an AF-68 and a 4-1000A linear amplifier. I could never get more than around 450 watts of carrier and stay linearI didn't need a heater in the shack either. 73, Darrell, WA5VGO 73, Darrell, WA5VGO
Re: [AMRadio] Pix of BPL hardware on utility poles in Cincinnati
That's odd, I thought the Chairman and three of the five commissioners were appointed by Bush. 73, Darrell, WA5VGO At 03:20 PM 7/23/2004 +, you wrote: Excellent!!! It must be realized that the people withing the commission that are pushing BPL are in-fact Clinton 'hang-ons'... Bush didn't 'clean house' like he should have... Go to my domain for links on how loved kerry is... http://vincewerber.org/ Have a good day and a better tomorrow 73 vince ka1iic
Re: [AMRadio] 6 Meter AM Rig.. Gonset G76?
Jim, You got me curious. I had never tried my G-76 on 6 meters. I fired up the transmitter and could only get about 12 watts output. This was with about 90 watts input. I didn't go any farther. At least with my G-76, I've got to concur with you. The 6DQ5 was very "distressed". 73, Darrell, WA5VGO At 10:00 AM 6/8/2003 -0700, Jim candela wrote: My question to the group is "is the G76 a viable six meter rig?" I recall a very distressed 6DQ5...
[AMRadio] AM Bulletin Board
Well, some wise guy has foul up the AM Bulletin board. All I did was go to the bulletin board and now every time I open it, a porno site also opens up. It is getting past my fire wall. Does anyone know how to get rid of the problem? Thanks, Darrell, WA5VGO
Re: [AMRadio] re: Ranger driving Thunderbolt
This sounds like a good plan. Simply reducing the loading on the 6146 will probably cause excessive screen grid dissipation. Darrell, WA5VGO At 05:19 PM 4/7/2003 -0400, you wrote: The way I reduce power out on my Ranger to drive an amp is not exactly the right way, but it works very well. I know of several other people using the very same method, reduce the screen voltage. I reduce my normal screen voltage with a variable resistor controlling a transistor. Turn the screen voltage up and load the Ranger as normal and then adjust the screen voltage until the desired power out is obtained. Power out is adjustable from full power down to 5 watts or so, I normally run my Ranger at 10 watts to drive an amp. The Ranger is capable of a lot of positive modulation peaks running like this. I have observed no ill affects from doing this, your mileage may vary. Mike / WN3B