[amsat-bb] Re: ARISSat daylightpower recovery time

2011-09-24 Thread Mark L. Hammond
Hi Dick,

I think the delay is the result of the timer circuit that was mandatory for its 
release during the spacewalk from the ISS.   The delay timer had to be there, 
and there is no way to defeat it, so it just has to run its course every time 
it exits eclipse.

As you have probably noticed, the orbit is changing (precessing?) so for a week 
or two conditions are favorable in your QTH, then it changes so that the bird 
spends much of the overhead time either in eclipse, or just after eclipse and 
the bird isn't transmitting.  The good news is that it will come around again 
so that conditions are favorable at a given QTH. 

As an admitted telemetry nut myself, it's painful to know the bird is at high 
elevation over my QTH, yet no telemetry is being sent or received...but it'll 
come back around :) 

The truly painful days will be when it's re-entering...doubt we'll get press 
like UARS!

73,

Mark N8MH

At 10:35 AM 9/24/2011 +0100, Richard Ferryman wrote:
Although I have severely limited satellite visibility I have been copying 
telemetry from ARISSat1 for some weeks.  I live in a valley surrounded by 
chalk hills and cliffs over 100 metres higher than me so my visible horizon is 
+12 degrees to +18 degrees at best.  Also my 3+3 element short crossed yagi 
and rotator are in the attic!  This worked beautifully when the satellite 
batteries held up and now when ARISSat is powered up.  However I notice it can 
take 10 minutes or more from the time the satellite enters sunlight until the 
system bursts into life.  At present this means loss of telemetry at this 
location when ARISSat is over the Atlantic, and even on overhead passes if it 
has been in sunlight for less than 10 minutes.
Question is why it takes ARISSat so long after entering sunlight before it 
starts transmitting?  Surely if the batteries have failed high resistance the 
voltage should be up within seconds of entering sunlight.
Dick G4BBH
___
Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb

___
Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb


[amsat-bb] Re: ARISSat daylightpower recovery time

2011-09-24 Thread andy thomas
Did not catch the second voice digit! MET is One shh  But satellite is 
switched on.
 
On 18 september the voice announced MET (19 and 21) equalled the time in 
sunlight, as I have calculated back using today's keps, within 1 minute. 
Allowing for keps 1 week old I think the MET is in fact announcing the time the 
satellite wakes up as she enters sunlight, but there are no fm transmissions 
at that time. The latency is up to 10 -19 minutes (if I had the second digit I 
could be more precise,hi!!)

From: andy thomas andythomasm...@yahoo.co.uk
To: amsat amsat-bb@amsat.org
Sent: Saturday, 24 September 2011, 11:24
Subject: Re:ARISSat daylightpower recovery time


I agree with this observation here at IO92NL. 

Arissat-1 does not switch on immediately when in sunlight, I have missed 
several passes this morning and in the last few days. 

I am just waiting for what the MET is announced (voice tlm) as at 1032 utc AOS 
(coming up) and will backtrack to how long she has been in sunlight. The 
difference ought to tell us the latency.

73 de andy G0SFJ
___
Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb


[amsat-bb] Re: ARISSat daylightpower recovery time

2011-09-24 Thread Greg D.

Based on posted observations, I have come to the conclusion that the 
satellite's MET comes up at either 0 or 1 when the satellite turns on, after 
the 10-or-so minute delay after entering sunlight.  Depending on what mode it 
thinks it should be in, I suppose it's possible that it might in fact be in one 
of those power saving quiet periods at that time, and only be heard a few 
minutes later.  Entering sunlight is not a knife-edged event in orbit; there's 
a short ramp in power, so (playing arm-chair engineer here) I expect it would 
be in low or emergency power mode for a short while.

Greg  KO6TH


 Date: Sat, 24 Sep 2011 11:49:36 +0100
 From: andythomasm...@yahoo.co.uk
 To: amsat-bb@amsat.org
 Subject: [amsat-bb] Re: ARISSat daylightpower recovery time
 
 Did not catch the second voice digit! MET is One shh  But satellite is 
 switched on.
  
 On 18 september the voice announced MET (19 and 21) equalled the time in 
 sunlight, as I have calculated back using today's keps, within 1 minute. 
 Allowing for keps 1 week old I think the MET is in fact announcing the time 
 the satellite wakes up as she enters sunlight, but there are no fm 
 transmissions at that time. The latency is up to 10 -19 minutes (if I had the 
 second digit I could be more precise,hi!!)
 
 From: andy thomas andythomasm...@yahoo.co.uk
 To: amsat amsat-bb@amsat.org
 Sent: Saturday, 24 September 2011, 11:24
 Subject: Re:ARISSat daylightpower recovery time
 
 
 I agree with this observation here at IO92NL. 
 
 Arissat-1 does not switch on immediately when in sunlight, I have missed 
 several passes this morning and in the last few days. 
 
 I am just waiting for what the MET is announced (voice tlm) as at 1032 utc 
 AOS (coming up) and will backtrack to how long she has been in sunlight. The 
 difference ought to tell us the latency.
 
 73 de andy G0SFJ
 ___
 Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author.
 Not an AMSAT-NA member? Join now to support the amateur satellite program!
 Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
  
___
Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb


[amsat-bb] Re: ARISSat daylightpower recovery time

2011-09-24 Thread andy thomas
Interesting
 
My observations last weekend show that MET matches the satellite entering 
sunlight:
 
18 September
 
calculated Time into sun: 1004 utc
Time of obs (announcement): 1023 utc
Voice announced MET: 19
 
calculated Time into sun: 1136 utc
Time of obs: 1158 utc
Voice announced MET: 21
 
maybe the voice tlm MET isn't accurate either!
 
howver I calculated the time of the entering sunlight using the keps of 24/9, 
not the keps of 18/9, via satpc32. 
 
73 de andy g0sfj

From: Greg D. ko6th_g...@hotmail.com
To: andy thomas andythomasm...@yahoo.co.uk; amsat amsat-bb@amsat.org
Sent: Saturday, 24 September 2011, 17:46
Subject: RE: [amsat-bb] Re: ARISSat daylightpower recovery time


Based on posted observations, I have come to the conclusion that the 
satellite's MET comes up at either 0 or 1 when the satellite turns on, after 
the 10-or-so minute delay after entering sunlight.  Depending on what mode it 
thinks it should be in, I suppose it's possible that it might in fact be in one 
of those power saving quiet periods at that time, and only be heard a few 
minutes later.  Entering sunlight is not a knife-edged event in orbit; there's 
a short ramp in power, so (playing arm-chair engineer here) I expect it would 
be in low or emergency power mode for a short while.

Greg  KO6TH



 Date: Sat, 24 Sep 2011 11:49:36 +0100
 From: andythomasm...@yahoo.co.uk
 To: amsat-bb@amsat.org
 Subject: [amsat-bb] Re: ARISSat daylightpower recovery time
 
 Did not catch the second voice digit! MET is One shh  But satellite is 
 switched on.
  
 On 18 september the voice announced MET (19 and 21) equalled the time in 
 sunlight, as I have calculated back using today's keps, within 1 minute. 
 Allowing for keps 1 week old I think the MET is in fact announcing the time 
 the satellite wakes up as she enters sunlight, but there are no fm 
 transmissions at that time. The latency is up to 10 -19 minutes (if I had the 
 second digit I could be more precise,hi!!)
 
 From: andy thomas andythomasm...@yahoo.co.uk
 To: amsat amsat-bb@amsat.org
 Sent: Saturday, 24 September 2011, 11:24
 Subject: Re:ARISSat daylightpower recovery time
 
 
 I agree with this observation here at IO92NL. 
 
 Arissat-1 does not switch on immediately when in sunlight, I have missed 
 several passes this morning and in the last few days. 
 
 I am just waiting for what the MET is announced (voice tlm) as at 1032 utc 
 AOS (coming up) and will backtrack to how long she has been in sunlight. The 
 difference ought to tell us the latency.
 
 73 de andy G0SFJ
 ___
 Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author.
 Not an AMSAT-NA member? Join now to support the amateur satellite program!
 Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
___
Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb