Re: [analog-help] Configuring browser aliases
> On Wed, 24 Jan 2001, Adrian Frankel wrote: > > > > I've got two SUBBROW commands: > > SUBBROW MSIE/*.* > > SUBBROW Mozilla/*.* > > The MSIE one doesn't work if it comes after the Mozilla one, but if it's > > first they both work fine. Bug or Feature? > > > > Sounds like a bug, but I can't reproduce it. Does it still happen with no > other commands in your configuration file? > hmph ... now I can't reproduce it either ... I'm positive I was looking at the correct output each time I tried a different SUBBROW configuration as the browser summary report would change. Maybe I was just imagining it ... This is the analog-help mailing list. To unsubscribe from this mailing list, send mail to [EMAIL PROTECTED] with "unsubscribe" in the main BODY OF THE MESSAGE. List archived at http://www.mail-archive.com/analog-help@lists.isite.net/
No Subject
Title: Hello, I would like to know if there is a possibility to extract from a logfile only infos concerning one of the virtual host. Thanx... Patrick CAPRON 03.88.14.85.49 [EMAIL PROTECTED]
Re: [analog-help] Configuring browser aliases
On Thu, 25 Jan 2001, Adrian Frankel wrote: > > hmph ... now I can't reproduce it either ... I'm positive I was looking at > the correct output each time I tried a different SUBBROW configuration as > the browser summary report would change. > Maybe I was just imagining it ... > Maybe you were looking at a cached version? Anyway, if it happens again, you know where to come. :) -- Stephen Turner http://www.statslab.cam.ac.uk/~sret1/ Statistical Laboratory, Wilberforce Road, Cambridge, CB3 0WB, England "Your account can only be used for a single internet session at any one time and for no more than 24 hours in any one day." (NTL terms of use) This is the analog-help mailing list. To unsubscribe from this mailing list, send mail to [EMAIL PROTECTED] with "unsubscribe" in the main BODY OF THE MESSAGE. List archived at http://www.mail-archive.com/analog-help@lists.isite.net/
Re: [analog-help] 4.90beta1, robotinclude & exclusions
On Wed, 24 Jan 2001, Aaron Shoblaske wrote: > In the 4.90beta, is there any way in one line to exclude from the entire > report all robots that you've defined using robotinclude (eg. ROBOT none) > or do you still have to type in a bunch of seperate BROWEXCLUDEs for each > robot (eg. BROWEXCLUDE inktomi*, etc.)? And if there isn't would it be > hard to implement it in the beta? > There isn't. It's a good idea though. I'll do it. Probably. Thanks, -- Stephen Turner http://www.statslab.cam.ac.uk/~sret1/ Statistical Laboratory, Wilberforce Road, Cambridge, CB3 0WB, England "Your account can only be used for a single internet session at any one time and for no more than 24 hours in any one day." (NTL terms of use) This is the analog-help mailing list. To unsubscribe from this mailing list, send mail to [EMAIL PROTECTED] with "unsubscribe" in the main BODY OF THE MESSAGE. List archived at http://www.mail-archive.com/analog-help@lists.isite.net/
[analog-help] Virtual Hosts
Title: Virtual Hosts Hello, I would like to know if there is a possibility to extract from a logfile only infos concerning one of the virtual host. Thanx... Patrick CAPRON 03.88.14.85.49 [EMAIL PROTECTED]
[analog-help] Strange information in Directory Report
I have a directory report that is showing the following as the last line: 30906: 1: : [not listed: 4 directories] where the columns being reported are: reqs: pages: %pages: directory The requests for the site's root directory are at the top of the directory report, and the report contains all the directories that I would expect to be listed. I have no DIRINCLUDE or DIREXCLUDE commands in the configuration file. What I can't understand is how the "not listed: 4 directories" can relate to 30906 requests for ONE page. Can anyone explain this? David Waters This message has been checked for all known viruses, by Star Internet, delivered through the MessageLabs Virus Control Centre. For further information visit: http://www.star.net.uk/stats.asp This is the analog-help mailing list. To unsubscribe from this mailing list, send mail to [EMAIL PROTECTED] with "unsubscribe" in the main BODY OF THE MESSAGE. List archived at http://www.mail-archive.com/analog-help@lists.isite.net/
[analog-help] Use of * in FILEEXCLUDE commands
I've tried to use the command FILEEXCLUDE /ns*.htm in a config. file to exclude all .htm files beginning with "ns" in the root directory of my site. However, I found that this command also excluded pages called ns*.asp. Am I misunderstanding the use of a * ? David Waters This message has been checked for all known viruses, by Star Internet, delivered through the MessageLabs Virus Control Centre. For further information visit: http://www.star.net.uk/stats.asp This is the analog-help mailing list. To unsubscribe from this mailing list, send mail to [EMAIL PROTECTED] with "unsubscribe" in the main BODY OF THE MESSAGE. List archived at http://www.mail-archive.com/analog-help@lists.isite.net/
[analog-help] Re:
CAPRON Patrick wrote: > I would like to know if there is a possibility to extract from a > logfile only infos concerning one of the virtual host. > Use the VHOSTINCLUDE command. See docs/include.html for details -- Jeremy Wadsack Wadsack-Allen Digital Group This is the analog-help mailing list. To unsubscribe from this mailing list, send mail to [EMAIL PROTECTED] with "unsubscribe" in the main BODY OF THE MESSAGE. List archived at http://www.mail-archive.com/analog-help@lists.isite.net/
Re: [analog-help] Strange information in Directory Report
David waters wrote: > I have a directory report that is showing the following as the last line: > > 30906: 1: : [not listed: 4 directories] > > where the columns being reported are: > > reqs: pages: %pages: directory > > The requests for the site's root directory are at the top of the directory report, >and the report contains all the directories that I would expect to be listed. I have >no DIRINCLUDE or DIREXCLUDE commands in the configuration file. > > What I can't understand is how the "not listed: 4 directories" can relate to 30906 >requests for ONE page. > > Can anyone explain this? The 30,906 requests are for pags, graphics, and everything else. Only one of them is for a page. So probably these four directories are you images and downloads directories. Likely the reason these directories aren't listed is because they are below your floor (which sounds like 2p). Try setting a floor of 1r or 0b to get them all. -- Jeremy Wadsack Wadsack-Allen Digital Group This is the analog-help mailing list. To unsubscribe from this mailing list, send mail to [EMAIL PROTECTED] with "unsubscribe" in the main BODY OF THE MESSAGE. List archived at http://www.mail-archive.com/analog-help@lists.isite.net/
Re: [analog-help] Use of * in FILEEXCLUDE commands
David waters wrote: > I've tried to use the command > > FILEEXCLUDE /ns*.htm > > in a config. file to exclude all .htm files beginning with "ns" in the root >directory of my site. > > However, I found that this command also excluded pages called ns*.asp. > > Am I misunderstanding the use of a * ? Yes, you are excluding all files starting with "ns" and ending with ".htm". What you really want is FILEEXCLUDE /ns* -- Jeremy Wadsack Wadsack-Allen Digital Group This is the analog-help mailing list. To unsubscribe from this mailing list, send mail to [EMAIL PROTECTED] with "unsubscribe" in the main BODY OF THE MESSAGE. List archived at http://www.mail-archive.com/analog-help@lists.isite.net/
Re: [analog-help] Strange information in Directory Report
Jeremy Wadsack answered my following query: > I have a directory report that is showing the following as the last line: > > 30906: 1: : [not listed: 4 directories] with >>The 30,906 requests are for pags, graphics, and everything else. Only >>one of them is for a page. So probably these four directories are you >>images and downloads directories. >>Likely the reason these directories aren't listed is because they are >>below your floor (which sounds like 2p). Try setting a floor of 1r or 0b >>to get them all. Many thanks, Jeremy. I now understand where I was going wrong. I changed my DIRFLOOR setting from 20p to 1r and I can now see details for another four directories. David Waters This message has been checked for all known viruses, by Star Internet, delivered through the MessageLabs Virus Control Centre. For further information visit: http://www.star.net.uk/stats.asp This is the analog-help mailing list. To unsubscribe from this mailing list, send mail to [EMAIL PROTECTED] with "unsubscribe" in the main BODY OF THE MESSAGE. List archived at http://www.mail-archive.com/analog-help@lists.isite.net/
Re: [analog-help] Use of * in FILEEXCLUDE commands
Jeremy Wadsack answered my query: > I've tried to use the command > > FILEEXCLUDE /ns*.htm > > in a config. file to exclude all .htm files beginning with "ns" in the root >directory of my site. > > However, I found that this command also excluded pages called ns*.asp. > > Am I misunderstanding the use of a * ? with >>Yes, you are excluding all files starting with "ns" and ending with >>".htm". What you really want is >> >> FILEEXCLUDE /ns* Jeremy, perhaps I did not clearly explain my problem. I want to exclude from the report pages such as "nspage1.htm" but keep pages such as "nspage1.asp". Unless I've misunderstood you, FILEEXCLUDE /ns* will exclude all files beginning with ns, right? David This message has been checked for all known viruses, by Star Internet, delivered through the MessageLabs Virus Control Centre. For further information visit: http://www.star.net.uk/stats.asp This is the analog-help mailing list. To unsubscribe from this mailing list, send mail to [EMAIL PROTECTED] with "unsubscribe" in the main BODY OF THE MESSAGE. List archived at http://www.mail-archive.com/analog-help@lists.isite.net/
Re: [analog-help] Use of * in FILEEXCLUDE commands
David waters wrote: > Jeremy Wadsack answered my query: > >> I've tried to use the command >> >> FILEEXCLUDE /ns*.htm >> >> in a config. file to exclude all .htm files beginning with "ns" in the root >directory of my site. >> >> However, I found that this command also excluded pages called ns*.asp. >> >> Am I misunderstanding the use of a * ? > > > with > >>> Yes, you are excluding all files starting with "ns" and ending with >>> ".htm". What you really want is >>> >>> FILEEXCLUDE /ns* >> > > Jeremy, perhaps I did not clearly explain my problem. > > I want to exclude from the report pages such as "nspage1.htm" but keep pages such as >"nspage1.asp". > > Unless I've misunderstood you, FILEEXCLUDE /ns* will exclude all files beginning >with ns, right? Sorry, David. I misread your original post. What you did first should work. FILEEXCLUDE /ns*.htm should not exlude pages that match /ns*.asp. Perhaps this has to do with your floors? -- Jeremy Wadsack Wadsack-Allen Digital Group This is the analog-help mailing list. To unsubscribe from this mailing list, send mail to [EMAIL PROTECTED] with "unsubscribe" in the main BODY OF THE MESSAGE. List archived at http://www.mail-archive.com/analog-help@lists.isite.net/
Re: [analog-help] Use of * in FILEEXCLUDE commands
Jeremy Wadsack answered my query: > I want to exclude from the report pages such as "nspage1.htm" but keep pages such as >>"nspage1.asp". > > Unless I've misunderstood you, FILEEXCLUDE /ns* will exclude all files beginning >with ns, right? with >>Sorry, David. I misread your original post. What you did first should >>work. FILEEXCLUDE /ns*.htm should not exlude pages that match /ns*.asp. >>Perhaps this has to do with your floors? Jeremy, I don't understand how my floor settings could be affecting the file exclusion, but for your info. they are as follows: DOMFLOOR 10p ORGFLOOR 10p HOSTFLOOR 10p #USERFLOOR 1p #FULLBROWFLOOR 10p BROWFLOOR 10p OSFLOOR 10r #VHOSTFLOOR 1p DIRFLOOR 1r TYPEFLOOR 10r REQFLOOR 1r When I have the line "FILEEXCLUDE /ns*.htm" in the config. file I don't get the .asp pages listed. If I comment out the line both the ns*.htm and ns*.asp pages reappear. Any further thoughts? David Waters This message has been checked for all known viruses, by Star Internet, delivered through the MessageLabs Virus Control Centre. For further information visit: http://www.star.net.uk/stats.asp This is the analog-help mailing list. To unsubscribe from this mailing list, send mail to [EMAIL PROTECTED] with "unsubscribe" in the main BODY OF THE MESSAGE. List archived at http://www.mail-archive.com/analog-help@lists.isite.net/
Re: [analog-help] Use of * in FILEEXCLUDE commands
David waters wrote: > When I have the line "FILEEXCLUDE /ns*.htm" in the config. file I don't get the .asp >pages listed. > If I comment out the line both the ns*.htm and ns*.asp pages reappear. > > Any further thoughts? > Sound like a bug. Stephen? -- Jeremy Wadsack Wadsack-Allen Digital Group This is the analog-help mailing list. To unsubscribe from this mailing list, send mail to [EMAIL PROTECTED] with "unsubscribe" in the main BODY OF THE MESSAGE. List archived at http://www.mail-archive.com/analog-help@lists.isite.net/
Re: [analog-help] Use of * in FILEEXCLUDE commands
On Thu, 25 Jan 2001, Jeremy Wadsack wrote: > David waters wrote: > > > When I have the line "FILEEXCLUDE /ns*.htm" in the config. file I don't get the >.asp pages listed. > > If I comment out the line both the ns*.htm and ns*.asp pages reappear. > > > > Any further thoughts? > > > > Sound like a bug. Stephen? Yes, except that I can't reproduce it (with 4.13 or 4.90beta1). Are you sure you didn't leave a space after the * or something? Check the output of SETTINGS ON to see what it thinks it's supposed to be excluding. -- Stephen Turner http://www.statslab.cam.ac.uk/~sret1/ Statistical Laboratory, Wilberforce Road, Cambridge, CB3 0WB, England "Your account can only be used for a single internet session at any one time and for no more than 24 hours in any one day." (NTL terms of use) This is the analog-help mailing list. To unsubscribe from this mailing list, send mail to [EMAIL PROTECTED] with "unsubscribe" in the main BODY OF THE MESSAGE. List archived at http://www.mail-archive.com/analog-help@lists.isite.net/
[analog-help] beginner's question
hi, I first used analog about a month ago and it worked fine. Today I tried to use it for the second time, and for some reason I am not getting any output. What I mean is that the file I've set it to (in analog.cfg) is 30 megs but the resulting Report.html does not give me any results. It simply says that it generated the report, and then there are no results in the page. I have taken the logfile from the same server directory as I did before (just different dates). Any ideas as to what I'm missing? Thanks, Holly Vipond Briercrest Family of Schools www.briercrest.ca This is the analog-help mailing list. To unsubscribe from this mailing list, send mail to [EMAIL PROTECTED] with "unsubscribe" in the main BODY OF THE MESSAGE. List archived at http://www.mail-archive.com/analog-help@lists.isite.net/
Re: [analog-help] Use of * in FILEEXCLUDE commands
Stephen Turner answered Jeremy Wadsack's reply to my query: > > When I have the line "FILEEXCLUDE /ns*.htm" in the config. file I don't get the >.asp pages listed. > > If I comment out the line both the ns*.htm and ns*.asp pages reappear. > > > > Any further thoughts? > > > > Sound like a bug. Stephen? with >>Yes, except that I can't reproduce it (with 4.13 or 4.90beta1). Are you sure >>you didn't leave a space after the * or something? Check the output of >>SETTINGS ON to see what it thinks it's supposed to be excluding. Stephen, here's the output with settings on: Including (+) and excluding (-) the following files: All included, then - /ns*.htm - /blank.htm I'm using analog version 4.13/Win32. Any ideas? David Waters This message has been checked for all known viruses, by Star Internet, delivered through the MessageLabs Virus Control Centre. For further information visit: http://www.star.net.uk/stats.asp This is the analog-help mailing list. To unsubscribe from this mailing list, send mail to [EMAIL PROTECTED] with "unsubscribe" in the main BODY OF THE MESSAGE. List archived at http://www.mail-archive.com/analog-help@lists.isite.net/
Re: [analog-help] I have tried to run anlgform.pl to callanalog, but I always have a return as below:
Hi Jeremy Wadsack; Thanks for answering my question. I still have a running problem. I have followed your instruction to add two commands to ERAanalog.cfg file as below: LANGFILE /usr/local/etc/httpd/htdocs/analog/lang/ DOMAINSFILE /usr/local/etc/httpd/htdocs/analog/lang/ After running anlgform.pl, I have gotten as below: econres% perl anlgform.pl (offline mode: enter name=value pairs on standard input) ../analog/analog: analog version 4.13/Unix ../analog/analog: Warning F: Failed to open configuration file ERAanalog.cfg: ignoring it (For help on all errors and warnings, see docs/errors.html) ../analog/analog: Warning F: Failed to open language file lang/uk.lng: ignoring it ../analog/analog: Fatal error: Can't read language file lang/uk.lng: exiting Content-Type: text/html Status: 500 Program Failure Did I set something wrong with .cfg file? Daphne This is the analog-help mailing list. To unsubscribe from this mailing list, send mail to [EMAIL PROTECTED] with "unsubscribe" in the main BODY OF THE MESSAGE. List archived at http://www.mail-archive.com/analog-help@lists.isite.net/
[analog-help] new beta?
any user feedback on the new beta? This is the analog-help mailing list. To unsubscribe from this mailing list, send mail to [EMAIL PROTECTED] with "unsubscribe" in the main BODY OF THE MESSAGE. List archived at http://www.mail-archive.com/analog-help@lists.isite.net/
Re: [analog-help] Use of * in FILEEXCLUDE commands
On Thu, 25 Jan 2001, David waters wrote: > > Stephen, here's the output with settings on: > > Including (+) and excluding (-) the following files: > All included, then > - /ns*.htm > - /blank.htm > > I'm using analog version 4.13/Win32. > And are you listing everything in the Request Report? (REQFLOOR 1r and REQINCLUDE *). -- Stephen Turner http://www.statslab.cam.ac.uk/~sret1/ Statistical Laboratory, Wilberforce Road, Cambridge, CB3 0WB, England "Your account can only be used for a single internet session at any one time and for no more than 24 hours in any one day." (NTL terms of use) This is the analog-help mailing list. To unsubscribe from this mailing list, send mail to [EMAIL PROTECTED] with "unsubscribe" in the main BODY OF THE MESSAGE. List archived at http://www.mail-archive.com/analog-help@lists.isite.net/
Re: [analog-help] I have tried to run anlgform.pl to call analog, but I always have a return as below:
Daphne Qiu wrote: > Thanks for answering my question. I still have a running problem. I have followed >your instruction to add two commands to ERAanalog.cfg file as below: > LANGFILE /usr/local/etc/httpd/htdocs/analog/lang/ > DOMAINSFILE /usr/local/etc/httpd/htdocs/analog/lang/ No. I think I said: LANGFILE /usr/local/etc/httpd/htdocs/analog/lang/uk.lng DOMAINSFILE /usr/local/etc/httpd/htdocs/analog/lang/ukdom.tab And Analog is telling you this: > rs.html) > ../analog/analog: Warning F: Failed to open language file lang/uk.lng: > ignoring it > ../analog/analog: Fatal error: Can't read language file lang/uk.lng: exiting -- Jeremy Wadsack Wadsack-Allen Digital Group This is the analog-help mailing list. To unsubscribe from this mailing list, send mail to [EMAIL PROTECTED] with "unsubscribe" in the main BODY OF THE MESSAGE. List archived at http://www.mail-archive.com/analog-help@lists.isite.net/
Re: [analog-help] new beta?
On Thu, 25 Jan 2001, JBilderback wrote: > any user feedback on the new beta? Yeah, I want to know that too. Almost none has reached me. I'm not sure if this is a good sign or a bad sign! -- Stephen Turner http://www.statslab.cam.ac.uk/~sret1/ Statistical Laboratory, Wilberforce Road, Cambridge, CB3 0WB, England "Your account can only be used for a single internet session at any one time and for no more than 24 hours in any one day." (NTL terms of use) This is the analog-help mailing list. To unsubscribe from this mailing list, send mail to [EMAIL PROTECTED] with "unsubscribe" in the main BODY OF THE MESSAGE. List archived at http://www.mail-archive.com/analog-help@lists.isite.net/
Re: [analog-help] I have tried to run anlgform.pl to callanalog, but I always have a return as below:
After I changed ERAanalog.cfg file to LANGFILE /usr/local/etc/httpd/htdocs/analog/lang/uk.lng DOMAINSFILE /usr/local/etc/httpd/htdocs/analog/lang/ukdom.tab and ran anlgform.pl, I still get same error return as before. econres% perl anlgform.pl (offline mode: enter name=value pairs on standard input) ../analog/analog: analog version 4.13/Unix ../analog/analog: Warning F: Failed to open configuration file ERAanalog.cfg: ignoring it (For help on all errors and warnings, see docs/errors.html) ../analog/analog: Warning F: Failed to open language file lang/uk.lng: ignoring it ../analog/analog: Fatal error: Can't read language file lang/uk.lng: exiting Content-Type: text/html Status: 500 Program Failure Daphne This is the analog-help mailing list. To unsubscribe from this mailing list, send mail to [EMAIL PROTECTED] with "unsubscribe" in the main BODY OF THE MESSAGE. List archived at http://www.mail-archive.com/analog-help@lists.isite.net/
[analog-help] Using UNCOMPRESS under WINNT
Hi All,
I am having a hard time getting Analog to read my compressed log files.
My UNCOMPRESS command in the config file looks like:
UNCOMPRESS *.gz ("d:\utils\gzip\gzip" -cd)
Analog will access the uncompressed files just fine but completely skips the
compress ones.
>From a command prompt I can type "gzip -cd in010125.log.gz" and the contents
of the log are displayed just fine.
Does anyone have UNCOMPRESS working under NT using gzip or have any idea
what I may be missing?
Thanks,
Phil
This is the analog-help mailing list. To unsubscribe from this
mailing list, send mail to [EMAIL PROTECTED]
with "unsubscribe" in the main BODY OF THE MESSAGE.
List archived at http://www.mail-archive.com/analog-help@lists.isite.net/
[analog-help] NEWBIE-LOGFORMAT PROBLEM?
Running version 4.90beta1... Here is my log file format: 2001/01/11 02:00:49,63.49.198.252,"GET /toc1.shtml HTTP/1.1",200,6538,1,"http://1001tunes.webhost.fm","-" What I am using for LOGFORMAT: LOGFORMAT (%Y/%m/%d %h:%n:%j,%s,"%r",%c,%b,%j,"%f",%j) I obtain some results but the "pages" column is zero for the monthly,daily,hourly graphs and hence no bar graph is drawn. Also extensions of file formats only show ".1" and ".2" and the directory results show 100% coming from "get /". Thanks in advanceahmet This is the analog-help mailing list. To unsubscribe from this mailing list, send mail to [EMAIL PROTECTED] with "unsubscribe" in the main BODY OF THE MESSAGE. List archived at http://www.mail-archive.com/analog-help@lists.isite.net/
Re: [analog-help] beginner's question
Hi Holly; > I tried to use it for the second time, and for some reason I am not > getting any output. [...] Any > ideas as to what I'm missing? just guessing: logfile name needs to changed? Did you set a FROM-TO command that does not include any entry from the current log? hope this helps Massimo This is the analog-help mailing list. To unsubscribe from this mailing list, send mail to [EMAIL PROTECTED] with "unsubscribe" in the main BODY OF THE MESSAGE. List archived at http://www.mail-archive.com/analog-help@lists.isite.net/
Re: [analog-help] NEWBIE-LOGFORMAT PROBLEM?
Ahmet Baycu wrote: > Running version 4.90beta1... > > Here is my log file format: > > 2001/01/11 02:00:49,63.49.198.252,"GET /toc1.shtml > HTTP/1.1",200,6538,1,"http://1001tunes.webhost.fm","-" > > > What I am using for LOGFORMAT: > > LOGFORMAT (%Y/%m/%d %h:%n:%j,%s,"%r",%c,%b,%j,"%f",%j) > > > I obtain some results but the "pages" column is zero for the > monthly,daily,hourly graphs and hence no bar graph is drawn. Also > extensions of file formats only show ".1" and ".2" and the directory > results show 100% coming from "get /". Add PAGEINCLUDE *.shtml to your configuration file to tell Analog to include .shtml requests as page counts. -- Jeremy Wadsack Wadsack-Allen Digital Group This is the analog-help mailing list. To unsubscribe from this mailing list, send mail to [EMAIL PROTECTED] with "unsubscribe" in the main BODY OF THE MESSAGE. List archived at http://www.mail-archive.com/analog-help@lists.isite.net/
Re: [analog-help] I have tried to run anlgform.pl to callanalog, but I always have a return as below:
Hi Jeremy Wadsack; I have tried to run anlgform.pl almost whole day, but I still get the same problem as before. When I change the ERAanalog.cfg file to as below: LANGFILE /usr/local/etc/httpd/htdocs/analog/lang/uk.lng DOMAINSFILE /usr/local/etc/httpd/htdocs/analog/lang/ukdom.tab , I couldn't run analog neither in command line nor anlgform.pl If I change the ERAanalog.cfg file to as below: LANGFILE lang/uk.lng DOMAINSFILE lang/ukdom.tab , I only can run analog from command line, but not anlgform.pl. I always get failed to run message return as below: econres% ./analog ./analog: analog version 4.13/Unix ./analog: Warning F: Failed to open language file /usr/local/etc/httpd/htdocs/analog/lang/uk.lng: ignoring it (For help on all errors and warnings, see docs/errors.html) ./analog: Fatal error: Can't read language file /usr/local/etc/httpd/htdocs/analog/lang/uk.lng: exiting Or econres% perl anlgform.pl (offline mode: enter name=value pairs on standard input) ../analog/analog: analog version 4.13/Unix ../analog/analog: Warning F: Failed to open configuration file ERAanalog.cfg: ignoring it (For help on all errors and warnings, see docs/errors.html) ../analog/analog: Warning F: Failed to open language file lang/uk.lng: ignoring it ../analog/analog: Fatal error: Can't read language file lang/uk.lng: exitin I greatly appreciate your help. Daphne This is the analog-help mailing list. To unsubscribe from this mailing list, send mail to [EMAIL PROTECTED] with "unsubscribe" in the main BODY OF THE MESSAGE. List archived at http://www.mail-archive.com/analog-help@lists.isite.net/
Re: [analog-help] NEWBIE-LOGFORMAT PROBLEM?
Adding the PAGEINCLUDE *.shtml line counted a few more files of this type but is not the problem. However, if I edit the request lines "GET /toc1.shtml HTTP/1.1" to "/toc1.shtml" then the reports come through OK although there are still some issues with the charts. The "%r" parameter seems incorrect. I can run a macro to remove all the GET and HTTP entries for a workaround but this seems unelegant. Any advice is appreciated. Thanks in advanceahmet > > Ahmet Baycu wrote: > > > Running version 4.90beta1... > > > > Here is my log file format: > > > > 2001/01/11 02:00:49,63.49.198.252,"GET /toc1.shtml > > HTTP/1.1",200,6538,1,"http://1001tunes.webhost.fm","-" > > > > > > What I am using for LOGFORMAT: > > > > LOGFORMAT (%Y/%m/%d %h:%n:%j,%s,"%r",%c,%b,%j,"%f",%j) > > > > > > I obtain some results but the "pages" column is zero for the > > monthly,daily,hourly graphs and hence no bar graph is drawn. Also > > extensions of file formats only show ".1" and ".2" and the directory > > results show 100% coming from "get /". > > Add PAGEINCLUDE *.shtml to your configuration file to tell Analog to > include .shtml requests as page counts. > > -- > > Jeremy Wadsack > Wadsack-Allen Digital Group > > > This is the analog-help mailing list. To unsubscribe from this > mailing list, send mail to [EMAIL PROTECTED] > with "unsubscribe" in the main BODY OF THE MESSAGE. > List archived at http://www.mail-archive.com/analog-help@lists.isite.net/ > This is the analog-help mailing list. To unsubscribe from this mailing list, send mail to [EMAIL PROTECTED] with "unsubscribe" in the main BODY OF THE MESSAGE. List archived at http://www.mail-archive.com/analog-help@lists.isite.net/
Re: [analog-help] NEWBIE-LOGFORMAT PROBLEM?
> Running version 4.90beta1... > > Here is my log file format: > > 2001/01/11 02:00:49,63.49.198.252,"GET /toc1.shtml > HTTP/1.1",200,6538,1,"http://1001tunes.webhost.fm","-" > > > What I am using for LOGFORMAT: > > LOGFORMAT (%Y/%m/%d %h:%n:%j,%s,"%r",%c,%b,%j,"%f",%j) > What You've told it is that "GET /toc1.shtml HTTP/1.1" is the request. 'GET' is the request method, '/toc1.shtml' is the requested file, 'HTTP/1.1' is the transport (in this case HTTP v1.1). You only want the middle bit. If analog won't recognise the format without a LOGFORMAT command maybe try: LOGFORMAT (%Y/%m/%d %h:%n:%j,%s,"%j%w%r%w%j",%c,%b,%j,"%f",%j) This is the analog-help mailing list. To unsubscribe from this mailing list, send mail to [EMAIL PROTECTED] with "unsubscribe" in the main BODY OF THE MESSAGE. List archived at http://www.mail-archive.com/analog-help@lists.isite.net/
Re: [analog-help] NEWBIE-LOGFORMAT PROBLEM?
Thanks Adrian! That resolved it! Man, this program is fast! Running version 4.90beta1... > > Here is my log file format: > > 2001/01/11 02:00:49,63.49.198.252,"GET /toc1.shtml > HTTP/1.1",200,6538,1,"http://1001tunes.webhost.fm","-" > > > What I am using for LOGFORMAT: > > LOGFORMAT (%Y/%m/%d %h:%n:%j,%s,"%r",%c,%b,%j,"%f",%j) > What You've told it is that "GET /toc1.shtml HTTP/1.1" is the request. 'GET' is the request method, '/toc1.shtml' is the requested file, 'HTTP/1.1' is the transport (in this case HTTP v1.1). You only want the middle bit. If analog won't recognise the format without a LOGFORMAT command maybe try: LOGFORMAT (%Y/%m/%d %h:%n:%j,%s,"%j%w%r%w%j",%c,%b,%j,"%f",%j) This is the analog-help mailing list. To unsubscribe from this mailing list, send mail to [EMAIL PROTECTED] with "unsubscribe" in the main BODY OF THE MESSAGE. List archived at http://www.mail-archive.com/analog-help@lists.isite.net/
RE: [analog-help] beginner's question
hi, >>just guessing: logfile name needs to changed? Did you set a FROM-TO command that does not include any entry from the current log? both of these in the .cfg file, I assume you mean? I've double-checked that and it all seems to be right. The only thing I changed in there since the last time was the logfile name, which is as it should be. I should say, I tried processing the old file again and it worked fine. For some reason the new one won't work. Unless something has changed in our server logging since then that I'm unaware of... holly This is the analog-help mailing list. To unsubscribe from this mailing list, send mail to [EMAIL PROTECTED] with "unsubscribe" in the main BODY OF THE MESSAGE. List archived at http://www.mail-archive.com/analog-help@lists.isite.net/
[analog-help] PAGEINCLUDE
Title: I have a need to include some files as pageview count so I have setconfiguration such like that,PAGEINCLUDE *.htmPAGEINCLUDE *.htmlPAGEINCLUDE *.cgiPAGEINCLUDE *.phpPAGEINCLUDE *.jspPAGEINCLUDE *.jarPAGEINCLUDE *.sqlPAGEINCLUDE */heditPAGEINCLUDE */mmenuIn this case, Analog does not count such files as pageview,*.sql*/hedit*/mmenuHow can I count those files as pageview ?Actually "*.sql" , "hedit" and "mmenu" are cgi which have trailing arguments.ThanksDong K. Kim
