Re: [Angstrom-devel] New updater.sh for testing
Marcin Juszkiewicz wrote: > Over year ago I started work on unified updater.sh for all PXA Zaurus > models. It was working on poodle, c7x0, spitz (I had them for testing) > and was broken for tosa. Our new Tosa hacker Dmitry Baryshkov fixed Tosa > problem and today I fixed rootfs size check (so there should not be > possible to flash bigger kernel or rootfs then it is allowed). > > But before we switch using it for other devices then c7x0 and tosa we need > you to test it on your devices. I put current version in OE metadata > and "compiled" version on http://www.openembedded.org/~hrw/updater.sh.bin > address. > > How to test? > > 1. Grab new updater.sh from address above and save as updater.sh > 2. Grab installkit for your machine and extract initrd.bin and zImage* >from it - save them to card > 3. Flash your device > 4. Report success or failure with exact info - which device, which files >(with sizes) Hi Marcin, tested sucessfully on Poodle 5600. It reports "File too big to flash!", which seems correct with the following image: http://www.angstrom-distribution.org/unstable/autobuild/poodle/Angstrom-x11-gpe-image-glibc-ipk-2007.9-test-20071117-poodle-installkit.tgz The old updater.sh did not reported any problems, which was wrong and bad. It flashes with sucess this image, which fits into the flash memory: http://www.angstrom-distribution.org/unstable/autobuild/poodle/Angstrom-x11-image-glibc-ipk-2007.9-test-20071117-poodle-installkit.tgz Both images sadly don't boot on my Poddle afterwards to to some kind of kernel crash, but that's probably another story... Helge ___ Angstrom-distro-devel mailing list Angstrom-distro-devel@linuxtogo.org http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/angstrom-distro-devel
Re: [Angstrom-devel] [Review] linux-rp-2.6.24 r4
Hello Hans, I didn't received that diff either. Could you maybe send it to me directly ? Another notes: a) In which time zone/country are you located ? I'm asking, because I very seldom see you on IRC (neither am I, but then I know when I could reach you). b) What are your plans for Angstrom ? I think it would be great if 2.6.24 could become default-kernel for Angstom on Poodle, and if we could enable WPA wireless as well by default. Best regards, Helge Original-Nachricht > Datum: Fri, 15 Feb 2008 23:02:17 -0800 > Von: "Hans Henry von Tresckow" <[EMAIL PROTECTED]> > An: angstrom-distro-devel@linuxtogo.org > Betreff: [Angstrom-devel] [Review] linux-rp-2.6.24 r4 > mtn diff for linux-rp 2.6.24 attached > > -- > Henry von Tresckow (hvontres) > ___ > Angstrom-distro-devel mailing list > Angstrom-distro-devel@linuxtogo.org > http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/angstrom-distro-devel -- Ist Ihr Browser Vista-kompatibel? Jetzt die neuesten Browser-Versionen downloaden: http://www.gmx.net/de/go/browser ___ Angstrom-distro-devel mailing list Angstrom-distro-devel@linuxtogo.org http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/angstrom-distro-devel
Re: [Angstrom-devel] [Review] linux-rp-2.6.24 r4
please ignore, I planned to send it in private to Hans Henry von Tresckow Helge Original-Nachricht > Datum: Sun, 17 Feb 2008 14:21:18 +0100 > Von: "Helge Deller" <[EMAIL PROTECTED]> > An: angstrom-distro-devel@linuxtogo.org > Betreff: Re: [Angstrom-devel] [Review] linux-rp-2.6.24 r4 > Hello Hans, > > I didn't received that diff either. > Could you maybe send it to me directly ? > > Another notes: > a) In which time zone/country are you located ? I'm asking, because I very > seldom see you on IRC (neither am I, but then I know when I could reach > you). > b) What are your plans for Angstrom ? I think it would be great if 2.6.24 > could become default-kernel for Angstom on Poodle, and if we could enable > WPA wireless as well by default. > > Best regards, > Helge > > Original-Nachricht > > Datum: Fri, 15 Feb 2008 23:02:17 -0800 > > Von: "Hans Henry von Tresckow" <[EMAIL PROTECTED]> > > An: angstrom-distro-devel@linuxtogo.org > > Betreff: [Angstrom-devel] [Review] linux-rp-2.6.24 r4 > > > mtn diff for linux-rp 2.6.24 attached > > > > -- > > Henry von Tresckow (hvontres) > > ___ > > Angstrom-distro-devel mailing list > > Angstrom-distro-devel@linuxtogo.org > > > http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/angstrom-distro-devel > > -- > Ist Ihr Browser Vista-kompatibel? Jetzt die neuesten > Browser-Versionen downloaden: http://www.gmx.net/de/go/browser > > ___ > Angstrom-distro-devel mailing list > Angstrom-distro-devel@linuxtogo.org > http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/angstrom-distro-devel -- Psst! Geheimtipp: Online Games kostenlos spielen bei den GMX Free Games! http://games.entertainment.web.de/de/entertainment/games/free ___ Angstrom-distro-devel mailing list Angstrom-distro-devel@linuxtogo.org http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/angstrom-distro-devel
[Angstrom-devel] [PATCH] Poodle WPA support
Could the developers here please check this patch for correctness and if OK, commit it to the -dev branch? Basically it enables WPA wireless support with CF-WIFI-cards on Poodle by default. This is done by adding some missing config lines (MACHINE_FEATURES_append_poodle and MACHINE_EXTRA_RRECOMMENDS_poodle), which are similiar to the ones of other Zaurus devices. In task-base.bb I've added the "kernel-module-crypto_algapi" and "kernel-module-cryptomgr" to the WIFI section, since they are necessary for WPA support. I assume this should make other Devices WPA-ready as well (is anybody else testing WPA?). Last but not least, the patch against "packages/linux/linux-rp-2.6.24/pxafb.patch" cleans up the patch itself. Somehow one section went in there twice. Thanks, Helge --- conf/machine/include/zaurus-2.6.inc 39d33e732bf59736015329814890e175fef292aa +++ conf/machine/include/zaurus-2.6.inc b18a61d786ca9ff15682abff9637b3e6fda7c071 @@ -26,12 +26,13 @@ MACHINE_FEATURES_append_spitz = " usbhos MACHINE_FEATURES_append_tosa = " usbhost wifi " MACHINE_FEATURES_append_akita = " usbhost " MACHINE_FEATURES_append_spitz = " usbhost ext2 " +MACHINE_FEATURES_append_poodle= " wifi " MACHINE_EXTRA_RDEPENDS = "zaurusd" MACHINE_EXTRA_RRECOMMENDS_c7x0 = "kernel-module-snd-soc-corgi kernel-module-pxa2xx-cs kernel-module-pcmcia" MACHINE_EXTRA_RRECOMMENDS_akita = "kernel-module-snd-soc-spitz kernel-module-pxa2xx-cs kernel-module-pcmcia" MACHINE_EXTRA_RRECOMMENDS_spitz = "kernel-module-snd-soc-spitz" -MACHINE_EXTRA_RRECOMMENDS_poodle = "kernel-module-snd-soc-poodle" +MACHINE_EXTRA_RRECOMMENDS_poodle = "kernel-module-snd-soc-poodle kernel-module-pxa2xx-cs kernel-module-pcmcia" MACHINE_EXTRA_RRECOMMENDS_collie = "kernel-module-locomo-spi kernel-module-sa1100-cs kernel-module-mmc-block \ kernel-module-collie-ts kernel-module-leds-locomo kernel-module-locomokbd" --- packages/tasks/task-base.bb 461108bf3685f7346e95114839d03eebb184593b +++ packages/tasks/task-base.bb 37aa3d6c27df362f019142443c1e917b48d198e6 @@ -345,6 +346,8 @@ RRECOMMENDS_task-base-wifi = "\ kernel-module-ieee80211-crypt-wep \ kernel-module-ecb \ kernel-module-arc4 \ +kernel-module-crypto_algapi \ +kernel-module-cryptomgr \ kernel-module-michael-mic \ kernel-module-aes" --- packages/linux/linux-rp-2.6.24/pxafb.patch d67eb27feca26ea83424f3eebfe5fd89f5e3b75f +++ packages/linux/linux-rp-2.6.24/pxafb.patch f885ab91c336e3345ebcc06ff37f90b630dca0d1 @@ -11,16 +11,3 @@ Index: linux-2.6.23/drivers/video/pxafb. lccr3 = fbi->reg_lccr3; set_hsync_time(fbi, pcd); fbi->reg_lccr3 = (fbi->reg_lccr3 & ~0xff) | LCCR3_PixClkDiv(pcd); -Index: linux-2.6.23/drivers/video/pxafb.c -=== linux-2.6.23.orig/drivers/video/pxafb.c2008-01-25 16:25:21.0 -0800 -+++ linux-2.6.23/drivers/video/pxafb.c 2008-01-25 16:32:14.0 -0800 -@@ -1194,7 +1194,7 @@ - if ((clkinfo->old == 13000)) - break; - -- pcd = get_pcd(fbi->fb.var.pixclock); -+ pcd = get_pcd(fbi,fbi->fb.var.pixclock); - lccr3 = fbi->reg_lccr3; - set_hsync_time(fbi, pcd); - fbi->reg_lccr3 = (fbi->reg_lccr3 & ~0xff) | LCCR3_PixClkDiv(pcd); ___ Angstrom-distro-devel mailing list Angstrom-distro-devel@linuxtogo.org http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/angstrom-distro-devel
Re: [Angstrom-devel] [PATCH] Poodle WPA support
Hi Marcin, On Sunday 17 February 2008, Marcin Juszkiewicz wrote: > Dnia Sunday, 17 of February 2008, Helge Deller napisał: > > Basically it enables WPA wireless support with CF-WIFI-cards on Poodle > > by default. This is done by adding some missing config lines > > (MACHINE_FEATURES_append_poodle and MACHINE_EXTRA_RRECOMMENDS_poodle), > > which are similiar to the ones of other Zaurus devices. > > Pushed PCMCIA modules adding. Thanks a lot for pushing my patches! > "wifi" feature is limited to devices with always available wifi -- Ok. > for wifi-in-cfslot use task-base-extended package (which Ångström does). This one I don't quite understand. Could you please explain this a little more ? I found RDEPENDS_task-base-extended in packages/tasks/task-base.bb. This one includes ${ADD_WIFI}. In the function "__anonymous ()", ${ADD_WIFI} is set to include "task-base-wifi" if this line is true: ...if "wifi" in distro_features and not "wifi" in machine_features and ("pcmcia" in machine_features or "pci" in machine_features or "usbhost" in machine_features)... It seems for Poodle, that "wifi" is in distro_features, "wifi" is not in machine_features and pcmcia is in machine_features. So the above check seems to be OK, but nevertheless the boot kernel on Poodle does not include wifi for me. Am I looking at the right place, or did you meant something else ? Do you maybe have another hint for me ? Helge ___ Angstrom-distro-devel mailing list Angstrom-distro-devel@linuxtogo.org http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/angstrom-distro-devel
Re: [Angstrom-devel] [Angstrom-distro-users] Poodle kernel 2.6.23 images available from the angstrom stable branch
On Friday 07 March 2008, Hans Henry von Tresckow wrote: > If you want to help out your machine mentors by testing kernel 2.6.23 > for poodle, grab a 2007.12-r9 image from > http://www.angstrom-distribution.org/unstable/autobuild/ , install it > and tell us all about it. WPA wifi won't work the opie* images, since the needed kernel crypto modules (as defined by the task-base-extended package) are missing on poodle (and probably on Akita and Spitz as well). Interestingly in the x11 image they are included, as the x11-image.bb includes "task-base-extended" in it's IMAGE_INSTALL variable. Is the following (untested) patch the correct fix ? Helge --- packages/images/opie-image.bb a1c62875ee2fbe52f0ba014c4931559c768b671c +++ packages/images/opie-image.bb cf7e5319c6dbd8b3b9423a721658be7c0d83ce3e @@ -2,7 +2,8 @@ DEPENDS = "${MACHINE_TASK_PROVIDER} task DEPENDS = "${MACHINE_TASK_PROVIDER} task-opie" -IMAGE_INSTALL = "${MACHINE_TASK_PROVIDER} task-opie-base task-opie-base-applets \ +IMAGE_INSTALL = "${MACHINE_TASK_PROVIDER} task-base-extended \ + task-opie-base task-opie-base-applets \ task-opie-base-inputmethods task-opie-base-apps \ task-opie-base-settings task-opie-base-decorations \ task-opie-base-styles task-opie-base-pim \ ___ Angstrom-distro-devel mailing list Angstrom-distro-devel@linuxtogo.org http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/angstrom-distro-devel
Re: [Angstrom-devel] [Angstrom-distro-users] Poodle kernel 2.6.23 images available from the angstrom stable branch
On Friday 07 March 2008, Hans Henry von Tresckow wrote: > If you want to help out your machine mentors by testing kernel 2.6.23 > for poodle, grab a 2007.12-r9 image from > http://www.angstrom-distribution.org/unstable/autobuild/ , install it > and tell us all about it. It seems the following patch is missing in -stable as well. It's already in -dev, but I don't have any number for the BACKPORTS file... Helge --- conf/machine/include/zaurus-2.6.inc 7ecb352669b5b71228489192cdeb5826dc02b46a +++ conf/machine/include/zaurus-2.6.inc f21df9dabb110dba413eec0c81e21d1b097a5756 @@ -35,7 +35,7 @@ MACHINE_EXTRA_RRECOMMENDS_spitz = "kern MACHINE_EXTRA_RRECOMMENDS_c7x0 = "kernel-module-snd-soc-corgi kernel-module-pxa2xx-cs kernel-module-pcmcia" MACHINE_EXTRA_RRECOMMENDS_akita = "kernel-module-snd-soc-spitz kernel-module-pxa2xx-cs kernel-module-pcmcia" MACHINE_EXTRA_RRECOMMENDS_spitz = "kernel-module-snd-soc-spitz" -MACHINE_EXTRA_RRECOMMENDS_poodle = "kernel-module-snd-soc-poodle" +MACHINE_EXTRA_RRECOMMENDS_poodle = "kernel-module-snd-soc-poodle kernel-module-pxa2xx-cs kernel-module-pcmcia" GUI_MACHINE_CLASS = "bigscreen" GUI_MACHINE_CLASS_collie = "smallscreen" ___ Angstrom-distro-devel mailing list Angstrom-distro-devel@linuxtogo.org http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/angstrom-distro-devel
Re: [Angstrom-devel] Hardware donation
Hi Guylhem, On Friday 21 March 2008, Guylhem Aznar wrote: > I have not had the chance to resume my development efforts, yet I still have > some interesting hardware, so I am opening a donation. > > I have : > - a Zaurus C750, with batteries > - a Simpad modded with Bluetooth + an internal MMC card + 128 Mb of RAM > - 2 GSM modules with full documentation (I was intending to hook them to > the simpad) > - various chips, stripping wire, etc > - a Sharp IRIS prototype (GSM Zaurus) with kernel sources > - a JTAG cable > > Everything works just fine. I can post a more detailed listing if needed. > Email me for details > > Ideally, I would like these donations to go to developpers, so that they can > be usefull. > > The only thing I am asking is to cover the shipping expenses - free if you > are in Paris, France and can fetch them at my place. I'm not sure how many developers will step up, but I'd really be interested in the Zaurus C750 and the JTAG cable. Having a Poodle (SL-5600) myself, additional kernel/distro-testing with a C750 would be just great. Of course I'd cover the shipping expenses. Helge ___ Angstrom-distro-devel mailing list Angstrom-distro-devel@linuxtogo.org http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/angstrom-distro-devel
Re: [Angstrom-devel] 2007.12-r12 images
On Saturday 22 March 2008, Koen Kooi wrote: > As you might have noticed, there are now 2007.12-r12 images being > uploaded. These are a result of a build from scratch on the > autobuilder, so the kernel-modules problems aren't there. > > Please report any findings you have. I tested the -r10 to -r12 images on Poodle (Poodle uses a 2.6.23-rp kernel). Two problems: 1. WPA isn't working. Kernel reports "ieee80211_crypt_tkip: could not allocate crypto API arc4". This is strange. arc4 and ecb modules are loaded, nevertheless a "cat /proc/crypto" doesn't report the ecb or any other block cypher. I assume this is the reason why the ieee80211_crypt_tkip module reports the problem, since it tries to load the "ecb(arc4)" driver. Grigorios Prasinos reported a similiar problem for C750 here: http://lists.linuxtogo.org/pipermail/angstrom-distro-users/2008-March/001747.html 2. Some keys are still not correct, esp. the Calendar and Address buttons. I will look into that later. Helge ___ Angstrom-distro-devel mailing list Angstrom-distro-devel@linuxtogo.org http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/angstrom-distro-devel
Re: [Angstrom-devel] Trying to fix the Angstrom Release 2007.12r13 WPA problem: could not allocate crypto API arc4
Matthew Swabey wrote: Attempted to address this by building into the kernel crypto-api, AES, micheal-mic and arc4 however it spat back at me: Size is 1303712 FATAL: This kernel is too big for your PXA Zaurus and will destroy data if you flash it. Please reduce the size of the kernel by making more of it modular. Since the vanilla release kernel clearly has modules bundled with them, unless someone can explain what the size limit is and how to avoid it I may look at wpa_supplicant and try to divine if it is failing to use them. Any advice would be appreciated here, I had it once working, just need to find time to try again... Nevertheless, could you just try CONFIG_CRYPTO_ALGAPI=y and the others you mentioned above as modules ? I think this was what it did for me... Helge ___ Angstrom-distro-devel mailing list Angstrom-distro-devel@linuxtogo.org http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/angstrom-distro-devel
Re: [Angstrom-devel] linux-rp 2.6.24 updates in .dev
Koen Kooi wrote: Richard just updated linux-rp 2.6.24 in .dev, could the zaurus mentors have a look at it to see if they can port the fixes to the stable branch? Hmm, revision 771be5e76b42e43330b225a2af3afbecdf9e9115 re-introduces the WPA problem for all Zaurii: http://bugs.openembedded.org/show_bug.cgi?id=4180 Helge ___ Angstrom-distro-devel mailing list Angstrom-distro-devel@linuxtogo.org http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/angstrom-distro-devel
[Angstrom-devel] WPA problems with 2.6.24 (was: Re: linux-rp 2.6.24 updates in .dev)
Helge Deller wrote: Koen Kooi wrote: Richard just updated linux-rp 2.6.24 in .dev, could the zaurus mentors have a look at it to see if they can port the fixes to the stable branch? Hmm, revision 771be5e76b42e43330b225a2af3afbecdf9e9115 re-introduces the WPA problem for all Zaurii: http://bugs.openembedded.org/show_bug.cgi?id=4180 In the meantime I had some mails with Richard and backported his linux-rp 2.6.24 changes to -stable. It seems that WPA isn't working out of the box on Poodle, C7x0 and 860 because the modules - ieee80211softmac - ieee80211 - cryptomgr are not available in the default configuration. Bugzilla 4180 worked around that problem by compiling the modules statically into the kernel. I think this patch (copy&pasted here) should do it. I still need to fully test it, but it gives the idea: --- conf/machine/include/zaurus-2.6.inc 7ecb352669b5b71228489192cdeb5826dc02b46a +++ conf/machine/include/zaurus-2.6.inc e6895a5493e38fcf250c777fb8c905754790a50d @@ -30,12 +30,13 @@ MACHINE_FEATURES_append_spitz = " usbhos MACHINE_FEATURES_append_tosa = " usbhost wifi " MACHINE_FEATURES_append_akita = " usbhost " MACHINE_FEATURES_append_spitz = " usbhost ext2 " +MACHINE_FEATURES_append_poodle= " wifi " MACHINE_EXTRA_RDEPENDS = "zaurusd" MACHINE_EXTRA_RRECOMMENDS_c7x0 = "kernel-module-snd-soc-corgi kernel-module-pxa2xx-cs kernel-module-pcmcia" MACHINE_EXTRA_RRECOMMENDS_akita = "kernel-module-snd-soc-spitz kernel-module-pxa2xx-cs kernel-module-pcmcia" MACHINE_EXTRA_RRECOMMENDS_spitz = "kernel-module-snd-soc-spitz" -MACHINE_EXTRA_RRECOMMENDS_poodle = "kernel-module-snd-soc-poodle" +MACHINE_EXTRA_RRECOMMENDS_poodle = "kernel-module-snd-soc-poodle kernel-module-pxa2xx-cs kernel-module-pcmcia" GUI_MACHINE_CLASS = "bigscreen" GUI_MACHINE_CLASS_collie = "smallscreen" --- packages/tasks/task-base.bb 461108bf3685f7346e95114839d03eebb184593b +++ packages/tasks/task-base.bb ca9c246238a6c68bcc66f309b47fba557151c5d2 @@ -343,6 +343,9 @@ RRECOMMENDS_task-base-wifi = "\ kernel-module-ieee80211-crypt-ccmp \ kernel-module-ieee80211-crypt-tkip \ kernel-module-ieee80211-crypt-wep \ +kernel-module-ieee80211 \ +kernel-module-ieee80211softmac \ +kernel-module-cryptomgr \ kernel-module-ecb \ kernel-module-arc4 \ kernel-module-michael-mic \ Basically I proposed the "MACHINE_FEATURES_append_poodle" patch once in this thread already: http://projects.linuxtogo.org/pipermail/angstrom-distro-devel/2008-February/001812.html It was discussed, but not resolved yet. Without this patch the wifi and crypto modules will not be copied to the base image. The second change in zaurus-2.6.inc (MACHINE_EXTRA_RRECOMMENDS_poodle) was already suggested on the stable mailing list by Hans Henry to be backported. Without this patch, kernel modules for compact flash bus (and CF Wifi cards) will not be installed and turns the slot unusable. The third change, which adds a few crypto modules to RRECOMMENDS_task-base-wifi, adds the missing modules for WPA support in the base image. In general it would be great if this patch (or a similiar one) could go into -dev and -stable, as Poodle with 2.6.24 works pretty well in all other areas (http://linuxtogo.org/gowiki/ZaurusPoodle). If the patch can be accepted I'd propose to backport RP's 2.6.24 kernel patches as well to -stable. Helge ___ Angstrom-distro-devel mailing list Angstrom-distro-devel@linuxtogo.org http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/angstrom-distro-devel
Re: [Angstrom-devel] WPA problems with 2.6.24
It seems the following patch is sufficient to get back WPA-support in 2.6.24 in the stable tree (copy&pasted here): --- packages/tasks/task-base.bb 461108bf3685f7346e95114839d03eebb184593b +++ packages/tasks/task-base.bb 0dcf821e4f4b057b241f45e8c33bfc292fa66629 @@ -345,6 +345,8 @@ RRECOMMENDS_task-base-wifi = "\ kernel-module-ieee80211-crypt-wep \ kernel-module-ecb \ kernel-module-arc4 \ +kernel-module-crypto_algapi \ +kernel-module-cryptomgr \ kernel-module-michael-mic \ kernel-module-aes" This patch is already in -dev, so I'm hereby just requesting for a backport to -stable tree. Ok? Helge ___ Angstrom-distro-devel mailing list Angstrom-distro-devel@linuxtogo.org http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/angstrom-distro-devel
Re: [Angstrom-devel] WPA problems with 2.6.24
Matthew Swabey wrote: | So you're confirming there is no problem with WPA in .dev? | Seconded, I did the fix against stable by building in the modules. Can you confirm that if you re-modularise ecb,arc4,micheal-mic etc and apply ~ that patch it correctly allocates the crypto apis? I always felt building in the crypto apis was a nasty fix. I haven't been able to build -dev quite some time, but the attached patch is what I applied to -stable and it worked. So, I assume -dev is OK. The defconfig-poodle file is a copy of the -dev version, and the packages/tasks/task-base.bb changes are based on the diff to the -dev version. Helge # # old_revision [889b3b712b0cf875bb41437a9f1eee33e4b83471] # # patch "conf/machine/include/zaurus-2.6.inc" # from [7ecb352669b5b71228489192cdeb5826dc02b46a] #to [f21df9dabb110dba413eec0c81e21d1b097a5756] # # patch "packages/linux/linux-rp-2.6.24/defconfig-poodle" # from [7ed5fcfcd03f36fa6cced3ed5e8a156c3f815783] #to [d1cfe4fb040e6a352b3363fc04df2f29d247233f] # # patch "packages/tasks/task-base.bb" # from [461108bf3685f7346e95114839d03eebb184593b] #to [0dcf821e4f4b057b241f45e8c33bfc292fa66629] # --- conf/machine/include/zaurus-2.6.inc 7ecb352669b5b71228489192cdeb5826dc02b46a +++ conf/machine/include/zaurus-2.6.inc f21df9dabb110dba413eec0c81e21d1b097a5756 @@ -35,7 +35,7 @@ MACHINE_EXTRA_RRECOMMENDS_spitz = "kern MACHINE_EXTRA_RRECOMMENDS_c7x0 = "kernel-module-snd-soc-corgi kernel-module-pxa2xx-cs kernel-module-pcmcia" MACHINE_EXTRA_RRECOMMENDS_akita = "kernel-module-snd-soc-spitz kernel-module-pxa2xx-cs kernel-module-pcmcia" MACHINE_EXTRA_RRECOMMENDS_spitz = "kernel-module-snd-soc-spitz" -MACHINE_EXTRA_RRECOMMENDS_poodle = "kernel-module-snd-soc-poodle" +MACHINE_EXTRA_RRECOMMENDS_poodle = "kernel-module-snd-soc-poodle kernel-module-pxa2xx-cs kernel-module-pcmcia" GUI_MACHINE_CLASS = "bigscreen" GUI_MACHINE_CLASS_collie = "smallscreen" --- packages/linux/linux-rp-2.6.24/defconfig-poodle 7ed5fcfcd03f36fa6cced3ed5e8a156c3f815783 +++ packages/linux/linux-rp-2.6.24/defconfig-poodle d1cfe4fb040e6a352b3363fc04df2f29d247233f @@ -1,4 +1,3 @@ - # Automatically generated make config: don't edit # Linux kernel version: 2.6.24-rc8 # Fri Jan 25 22:13:14 2008 @@ -34,7 +33,7 @@ CONFIG_LOCALVERSION="" CONFIG_LOCK_KERNEL=y CONFIG_INIT_ENV_ARG_LIMIT=32 CONFIG_LOCALVERSION="" -CONFIG_LOCALVERSION_AUTO=y +# CONFIG_LOCALVERSION_AUTO is not set CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y @@ -1171,7 +1170,7 @@ CONFIG_SND_SOC_WM8731=m # Open Sound System # # CONFIG_SOUND_PRIME is not set -CONFIG_AC97_BUS=m +# CONFIG_AC97_BUS is not set CONFIG_HID_SUPPORT=y CONFIG_HID=m # CONFIG_HID_DEBUG is not set @@ -1265,7 +1264,7 @@ CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m # CONFIG_USB_SERIAL_CH341 is not set # CONFIG_USB_SERIAL_WHITEHEAT is not set CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m -# CONFIG_USB_SERIAL_CP2101 is not set +CONFIG_USB_SERIAL_CP2101=m CONFIG_USB_SERIAL_CYPRESS_M8=m CONFIG_USB_SERIAL_EMPEG=m CONFIG_USB_SERIAL_FTDI_SIO=m @@ -1688,7 +1687,7 @@ CONFIG_CRYPTO=y # CONFIG_SECURITY is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y -CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_ALGAPI=m CONFIG_CRYPTO_BLKCIPHER=m CONFIG_CRYPTO_HASH=m CONFIG_CRYPTO_MANAGER=m @@ -1703,7 +1702,7 @@ CONFIG_CRYPTO_WP512=m CONFIG_CRYPTO_WP512=m # CONFIG_CRYPTO_TGR192 is not set # CONFIG_CRYPTO_GF128MUL is not set -CONFIG_CRYPTO_ECB=y +CONFIG_CRYPTO_ECB=m CONFIG_CRYPTO_CBC=m CONFIG_CRYPTO_PCBC=m # CONFIG_CRYPTO_LRW is not set @@ -1719,13 +1718,13 @@ CONFIG_CRYPTO_TEA=m CONFIG_CRYPTO_CAST5=m CONFIG_CRYPTO_CAST6=m CONFIG_CRYPTO_TEA=m -CONFIG_CRYPTO_ARC4=y +CONFIG_CRYPTO_ARC4=m CONFIG_CRYPTO_KHAZAD=m CONFIG_CRYPTO_ANUBIS=m # CONFIG_CRYPTO_SEED is not set CONFIG_CRYPTO_DEFLATE=m CONFIG_CRYPTO_LZO=m -CONFIG_CRYPTO_MICHAEL_MIC=y +CONFIG_CRYPTO_MICHAEL_MIC=m CONFIG_CRYPTO_CRC32C=m CONFIG_CRYPTO_CAMELLIA=m CONFIG_CRYPTO_TEST=m --- packages/tasks/task-base.bb 461108bf3685f7346e95114839d03eebb184593b +++ packages/tasks/task-base.bb 0dcf821e4f4b057b241f45e8c33bfc292fa66629 @@ -345,6 +345,8 @@ RRECOMMENDS_task-base-wifi = "\ kernel-module-ieee80211-crypt-wep \ kernel-module-ecb \ kernel-module-arc4 \ +kernel-module-crypto_algapi \ +kernel-module-cryptomgr \ kernel-module-michael-mic \ kernel-module-aes" ___ Angstrom-distro-devel mailing list Angstrom-distro-devel@linuxtogo.org http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/angstrom-distro-devel
Re: [Angstrom-devel] WPA problems with 2.6.24
Koen Kooi wrote: Helge Deller wrote: It seems the following patch is sufficient to get back WPA-support in 2.6.24 in the stable tree (copy&pasted here): --- packages/tasks/task-base.bb 461108bf3685f7346e95114839d03eebb184593b +++ packages/tasks/task-base.bb 0dcf821e4f4b057b241f45e8c33bfc292fa66629 @@ -345,6 +345,8 @@ RRECOMMENDS_task-base-wifi = "\ kernel-module-ieee80211-crypt-wep \ kernel-module-ecb \ kernel-module-arc4 \ + kernel-module-crypto_algapi \ + kernel-module-cryptomgr \ kernel-module-michael-mic \ kernel-module-aes" This patch is already in -dev, so I'm hereby just requesting for a backport to -stable tree. People can request stuff all day long, but the only way to get this into the stable tree is to offer the patch for review on the stable branch mailinglist. Sure, I'll do. Thanks, Helge ___ Angstrom-distro-devel mailing list Angstrom-distro-devel@linuxtogo.org http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/angstrom-distro-devel
Re: [Angstrom-devel] 2007.12 r16 builds being uploaded
Koen Kooi wrote: Hi, The autobuild is currently building and uploading r16 images to the autobuild area. Please test them and provide feedback to this list. The following patch is still missing in 2007.12 r16, which render PCMCIA/CF unusable on Poodle. I'll send a backport request to stable-list... Helge --- conf/machine/include/zaurus-2.6.inc 7ecb352669b5b71228489192cdeb5826dc02b46a +++ conf/machine/include/zaurus-2.6.inc f21df9dabb110dba413eec0c81e21d1b097a5756 @@ -35,7 +35,7 @@ MACHINE_EXTRA_RRECOMMENDS_spitz = "kern MACHINE_EXTRA_RRECOMMENDS_c7x0 = "kernel-module-snd-soc-corgi kernel-module-pxa2xx-cs kernel-module-pcmcia" MACHINE_EXTRA_RRECOMMENDS_akita = "kernel-module-snd-soc-spitz kernel-module-pxa2xx-cs kernel-module-pcmcia" MACHINE_EXTRA_RRECOMMENDS_spitz = "kernel-module-snd-soc-spitz" -MACHINE_EXTRA_RRECOMMENDS_poodle = "kernel-module-snd-soc-poodle" +MACHINE_EXTRA_RRECOMMENDS_poodle = "kernel-module-snd-soc-poodle kernel-module-pxa2xx-cs kernel-module-pcmcia" ___ Angstrom-distro-devel mailing list Angstrom-distro-devel@linuxtogo.org http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/angstrom-distro-devel
Re: [Angstrom-devel] poodle r18 images uploaded
Koen Kooi wrote: Since r18 only affects poodle, only r18 images for poodle were uploaded. If you have a poodle, please test them and report back. Thanks! WPA works great now on Poodle. http://linuxtogo.org/gowiki/ZaurusPoodle Helge ___ Angstrom-distro-devel mailing list Angstrom-distro-devel@linuxtogo.org http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/angstrom-distro-devel