Re: ARERR [9084] for client station that has 2 network cards
Hi, Can you show output of netstat -ni route print And tell wich interface is static and wich is dinamic. -- Alexander Doronin -Original Message- ?? : Plante, Martin [EMAIL PROTECTED] : arslist@ARSLIST.ORG ??: 08.05.07 16:05 : [ARSLIST] ARERR [9084] for client station that has 2 network cards Hello All, We have an issue where a client station that has 2 network cards using Windows 2000. The primary card has a static ip and the second one is not. User often gets error: ARERR [9084] User is currently connected from another machine. Sometimes is even locks him up for 15 minutes due to restriction from system. (in order to prevent the swap from one to the other all the time forcing message to appear on screen and in logs and preventing locks when returning to the same ip within 15 min) Is there a way to force Remedy clients to use a single defined ip when making calls to the server ? Other possible solution or lead ? Thanks in advance, Martin Plante UAP inc. ___ UNSUBSCRIBE or access ARSlist Archives at www.arslist.org ARSlist:Where the Answers Are ___ UNSUBSCRIBE or access ARSlist Archives at www.arslist.org ARSlist:Where the Answers Are
Re: Remedy WUT, CodeWeaver and Linux
Hi, I tried to run Admin tool and WUT on Debian using wine. It seams like evrething works fine, for now ;) I couldn't install WUT I just copy directory from my Windows XP to Debian. Then I got a lot of erros of missing dll's I also copied them from XP to Debian. -- Alexander Doronin -Original Message- ?? : Bob Rowe [EMAIL PROTECTED] : arslist@ARSLIST.ORG ??: 03.05.07 17:47 : Remedy WUT, CodeWeaver and Linux Has anyone had experience using the remedy Windows User Tool for 6.3 and 7.xin CodeWeaver's rendition of WINE on Linux? I'll take a huge leap and assume that if the WUT works the admin tool will as well. Thanks. -- Bob Rowe, Remedy Action Request System Development and Administration [EMAIL PROTECTED] The golden rule is to test everything in the light of reason and experience, no matter from where it comes. Mohandas K. Gandhi ___ UNSUBSCRIBE or access ARSlist Archives at www.arslist.org ARSlist:Where the Answers Are ___ UNSUBSCRIBE or access ARSlist Archives at www.arslist.org ARSlist:Where the Answers Are
Re: CR XI - building reports - Error 9011 ?
Hi I had the same issue and it was due 2 errors: 1. User had no permission to form on that report is generated 2. There's a problem with arodbc driver v. 7.x - non latin simbols in qualification (in my case cyrylic simbols) caused error. - workaround - install arodbc v. 6.3 -- Alexander Doronin -Original Message- ?? : patrick zandi [EMAIL PROTECTED] : arslist@ARSLIST.ORG ??: 03.05.07 18:07 : Re: CR XI - building reports - Error 9011 ? Actually, I narrowed the issue down again.. try this on for size. Deleted and re-installed. - no change Tried to use CR logged in as admin - worked Logged in as user - no work modified user to be in admin group - no work logged in as user - runas admin - worked Wierd. Very Wierd.. It is only on 1 form that I can find. it works with all the other forms for some reason. Very Very Wierd. On 5/3/07, Vyom Labs - ITSM Support [EMAIL PROTECTED] wrote: Hi Patrick, The ARERROR 9011 is Loading of encryption library failed.This error is occurred because the encryption shared library DLL could not be successfully loaded. Only Crystal 9 is supported by remedy it has not updated the driver to 10 or 11. The culprit is the crdb_odbc.dll; you need a version in the 9.n.n.n range. I have found three in my CR 10 Pro setup in the \Program Files\Common files\Crystal Decisions directories. One of these was version 9.2.0.564 (right-click on the dll, select Properties, read the Version tab). The other three I renamed so CR couldn't use them and then copied the version 9 dll into the three directories where I found crdb_odbc.dll. I also renamed crdb_odbc_res_en.dll. Now it all works successfully. Hope this will help you. Regards, Sandeep. -- www.vyomlabs.com Consulting | Oursourcing | Training || ITIL | IT Governance |BMC Remedy patrick zandi wrote: ** I put in a ticket already. ENV Windows 2003 SP2 / ARS 7.00 P2 / Oracle 10.2.0.3 http://10.2.0.3 backend - solaris Trying to rebuild all CR's for migration to 7.01 P2 or P3 / Getting following error:: Database connector error '220:driver] out of range [database vendor code:9011]' CR XI version is the following:: 11.5.8.826 -- Patrick Zandi __20060125___This posting was submitted with HTML in it___ ___ UNSUBSCRIBE or access ARSlist Archives at www.arslist.org ARSlist:Where the Answers Are -- Patrick Zandi ___ UNSUBSCRIBE or access ARSlist Archives at www.arslist.org ARSlist:Where the Answers Are ___ UNSUBSCRIBE or access ARSlist Archives at www.arslist.org ARSlist:Where the Answers Are
Re: CR XI - building reports - Error 9011 ?
Patrick, Try to uninstall WUT from box where you have CR installed. And install there WUT 6.3 and try to run report. -- Alexander Doronin -Original Message- ?? : patrick zandi [EMAIL PROTECTED] : arslist@ARSLIST.ORG ??: 03.05.07 20:17 : Re: CR XI - building reports - Error 9011 ? Alexander, I am creating this from scratch, as Administrator. I know it is not a permission issue.. ENV: 7.00 P2 On 5/3/07, Alexander Doronin [EMAIL PROTECTED] wrote: Hi I had the same issue and it was due 2 errors: 1. User had no permission to form on that report is generated 2. There's a problem with arodbc driver v. 7.x - non latin simbols in qualification (in my case cyrylic simbols) caused error. - workaround - install arodbc v. 6.3 -- Alexander Doronin -Original Message- ?? : patrick zandi [EMAIL PROTECTED] : arslist@ARSLIST.ORG ??: 03.05.07 18:07 ___ UNSUBSCRIBE or access ARSlist Archives at www.arslist.org ARSlist:Where the Answers Are
Re: CR XI - building reports - Error 9011 ?
Hi, You can use CR XI reports with arodbc driver. I have a lot of users that use CR XI Rreports in WUT 7.0.1 with arodbc driver 6.3. To do so I use little trik: 1. Install WUT 7.0.1 2. Install over WUT 7.0.1 WUT 6,3 but in different folder, so it'll leave WUT 7.0.1 in place. And you'll get arodbc driver v 6.3. After it my problem with error 9100 disapeared... -- Alexander Doronin -Original Message- ?? : patrick zandi [EMAIL PROTECTED] : arslist@ARSLIST.ORG ??: 03.05.07 20:39 : Re: CR XI - building reports - Error 9011 ? Alenxander, I know I could use the usertool 6.3 against a 7.00 P2 box. and yes the old reports will work.. (built on 7,8,8.5,9) and either upgraded or rebuilt from scratch.. This works .. I know that. I am working on making CR XI work, and I am building new reports in CR XI so I can migrate to 7.01 P1/P2/P3 server. Cannot do that with the previous report structure. I am in the build and test mode at the present, Actually seems I have been here all my life.. 8-) On 5/3/07, Alexander Doronin [EMAIL PROTECTED] wrote: Patrick, Try to uninstall WUT from box where you have CR installed. And install there WUT 6.3 and try to run report. -- Alexander Doronin ___ UNSUBSCRIBE or access ARSlist Archives at www.arslist.org ARSlist:Where the Answers Are
