Re: Developer Studio and Radio Button Height
To correct the height try below steps. 1. Change the Label Location property to Top 2. Change the Label Location property to Left 3. Align /size field if required Thanks and Regards, Ashish The opinions, statements, and/or suggested courses of action expressed in this E-mail do not necessarily reflect those of BMC Software, Inc. My voluntary participation in this forum is not intended to convey a role as a spokesperson, liaison or public relations representative for BMC Software, Inc. From: Joe Martin D'Souza [mailto:jdso...@shyle.net] Sent: Thursday, March 31, 2011 6:20 AM Subject: Re: Developer Studio and Radio Button Height ** I do not recall seeing it on 7.6.03 but then I was working on that version for a very short time before stepping up to 7.6.04. I’ll try it on 7.6.04 and let you guys know if that problem still exists but I could swear it was fixed after some of the initial patches of 7.5. Joe From: Lyle Taylormailto:tayl...@ldschurch.org Sent: Wednesday, March 30, 2011 3:01 PM Newsgroups: public.remedy.arsystem.general To: arslist@ARSLIST.ORGmailto:arslist@ARSLIST.ORG Subject: Re: Developer Studio and Radio Button Height ** I’m using 7.6.03. Like Andrew, I see this when I try to align and size things similarly using the toolbar buttons. I haven’t yet tried fiddling with the other properties to see if it would pop back, though. I’ll give that a try. Thanks, Lyle From: Action Request System discussion list(ARSList) [mailto:arslist@ARSLIST.ORG] On Behalf Of Andrew Fremont Sent: Wednesday, March 30, 2011 11:13 AM To: arslist@ARSLIST.ORG Subject: Re: Developer Studio and Radio Button Height ** I'm having the same issue on the selection field on DS 7.5. P004 This happen on selecting multiple fields then using the Align Left and Size Label button from the menu bar. To restore the hight on the selection fields, I have to change some of the display properties on width, alignment... On Tue, Mar 29, 2011 at 9:24 PM, Joe Martin D'Souza jdso...@shyle.netmailto:jdso...@shyle.net wrote: ** What version of the studio are you on? I used to have this problem on the very early versions of the Studio and found it frustrating as well.. It was then later corrected on later versions.. Joe From: Lyle Taylormailto:tayl...@ldschurch.org Sent: Tuesday, March 29, 2011 8:24 PM Newsgroups: public.remedy.arsystem.general To: arslist@ARSLIST.ORGmailto:arslist@ARSLIST.ORG Subject: Developer Studio and Radio Button Height ** Hi All, I’m having a problem with DS where when I modify the layout of a radio button, it changes the height to 14 pixels, which cuts off the lower portion of the radio button. The height property for the field is grayed out, so I can’t adjust it back to something reasonable. Has anyone else had this problem? Any idea how to fix it? Thanks, Lyle Taylor NOTICE: This email message is for the sole use of the intended recipient(s) and may contain confidential and privileged information. Any unauthorized review, use, disclosure or distribution is prohibited. If you are not the intended recipient, please contact the sender by reply email and destroy all copies of the original message. _attend WWRUG11 www.wwrug.com ARSlist: Where the Answers Are_
Re: Developer Studio and Radio Button Height
I'm having the same issue on the selection field on DS 7.5. P004 This happen on selecting multiple fields then using the Align Left and Size Label button from the menu bar. To restore the hight on the selection fields, I have to change some of the display properties on width, alignment... On Tue, Mar 29, 2011 at 9:24 PM, Joe Martin D'Souza jdso...@shyle.netwrote: ** What version of the studio are you on? I used to have this problem on the very early versions of the Studio and found it frustrating as well.. It was then later corrected on later versions.. Joe *From:* Lyle Taylor tayl...@ldschurch.org *Sent:* Tuesday, March 29, 2011 8:24 PM *Newsgroups:* public.remedy.arsystem.general *To:* arslist@ARSLIST.ORG *Subject:* Developer Studio and Radio Button Height ** Hi All, I’m having a problem with DS where when I modify the layout of a radio button, it changes the height to 14 pixels, which cuts off the lower portion of the radio button. The height property for the field is grayed out, so I can’t adjust it back to something reasonable. Has anyone else had this problem? Any idea how to fix it? Thanks, Lyle Taylor NOTICE: This email message is for the sole use of the intended recipient(s) and may contain confidential and privileged information. Any unauthorized review, use, disclosure or distribution is prohibited. If you are not the intended recipient, please contact the sender by reply email and destroy all copies of the original message. _attend WWRUG11 www.wwrug.com ARSlist: Where the Answers Are_ ___ UNSUBSCRIBE or access ARSlist Archives at www.arslist.org attend wwrug11 www.wwrug.com ARSList: Where the Answers Are
Re: Developer Studio and Radio Button Height
I'm using 7.6.03. Like Andrew, I see this when I try to align and size things similarly using the toolbar buttons. I haven't yet tried fiddling with the other properties to see if it would pop back, though. I'll give that a try. Thanks, Lyle From: Action Request System discussion list(ARSList) [mailto:arslist@ARSLIST.ORG] On Behalf Of Andrew Fremont Sent: Wednesday, March 30, 2011 11:13 AM To: arslist@ARSLIST.ORG Subject: Re: Developer Studio and Radio Button Height ** I'm having the same issue on the selection field on DS 7.5. P004 This happen on selecting multiple fields then using the Align Left and Size Label button from the menu bar. To restore the hight on the selection fields, I have to change some of the display properties on width, alignment... On Tue, Mar 29, 2011 at 9:24 PM, Joe Martin D'Souza jdso...@shyle.netmailto:jdso...@shyle.net wrote: ** What version of the studio are you on? I used to have this problem on the very early versions of the Studio and found it frustrating as well.. It was then later corrected on later versions.. Joe From: Lyle Taylormailto:tayl...@ldschurch.org Sent: Tuesday, March 29, 2011 8:24 PM Newsgroups: public.remedy.arsystem.general To: arslist@ARSLIST.ORGmailto:arslist@ARSLIST.ORG Subject: Developer Studio and Radio Button Height ** Hi All, I'm having a problem with DS where when I modify the layout of a radio button, it changes the height to 14 pixels, which cuts off the lower portion of the radio button. The height property for the field is grayed out, so I can't adjust it back to something reasonable. Has anyone else had this problem? Any idea how to fix it? Thanks, Lyle Taylor NOTICE: This email message is for the sole use of the intended recipient(s) and may contain confidential and privileged information. Any unauthorized review, use, disclosure or distribution is prohibited. If you are not the intended recipient, please contact the sender by reply email and destroy all copies of the original message. _attend WWRUG11 www.wwrug.comhttp://www.wwrug.com ARSlist: Where the Answers Are_ _attend WWRUG11 www.wwrug.comhttp://www.wwrug.com ARSlist: Where the Answers Are_ ___ UNSUBSCRIBE or access ARSlist Archives at www.arslist.org attend wwrug11 www.wwrug.com ARSList: Where the Answers Are
Re: Developer Studio and Radio Button Height
When I have trouble with default field height (radio button or character field), I find it helpful to temporarily set the height to 2 lines, then set it back to 1. That usually works. Mike Luttmann DISA Remedy Engineer -Original Message- From: Action Request System discussion list(ARSList) [mailto:arslist@ARSLIST.ORG] On Behalf Of Lyle Taylor Sent: Wednesday, March 30, 2011 13:02 To: arslist@ARSLIST.ORG Subject: Re: Developer Studio and Radio Button Height ** I'm using 7.6.03. Like Andrew, I see this when I try to align and size things similarly using the toolbar buttons. I haven't yet tried fiddling with the other properties to see if it would pop back, though. I'll give that a try. Thanks, Lyle From: Action Request System discussion list(ARSList) [mailto:arslist@ARSLIST.ORG] On Behalf Of Andrew Fremont Sent: Wednesday, March 30, 2011 11:13 AM To: arslist@ARSLIST.ORG Subject: Re: Developer Studio and Radio Button Height ** I'm having the same issue on the selection field on DS 7.5. P004 This happen on selecting multiple fields then using the Align Left and Size Label button from the menu bar. To restore the hight on the selection fields, I have to change some of the display properties on width, alignment... On Tue, Mar 29, 2011 at 9:24 PM, Joe Martin D'Souza jdso...@shyle.net wrote: ** What version of the studio are you on? I used to have this problem on the very early versions of the Studio and found it frustrating as well.. It was then later corrected on later versions.. Joe From: Lyle Taylor mailto:tayl...@ldschurch.org Sent: Tuesday, March 29, 2011 8:24 PM Newsgroups: public.remedy.arsystem.general To: arslist@ARSLIST.ORG Subject: Developer Studio and Radio Button Height ** Hi All, I'm having a problem with DS where when I modify the layout of a radio button, it changes the height to 14 pixels, which cuts off the lower portion of the radio button. The height property for the field is grayed out, so I can't adjust it back to something reasonable. Has anyone else had this problem? Any idea how to fix it? Thanks, Lyle Taylor NOTICE: This email message is for the sole use of the intended recipient(s) and may contain confidential and privileged information. Any unauthorized review, use, disclosure or distribution is prohibited. If you are not the intended recipient, please contact the sender by reply email and destroy all copies of the original message. _attend WWRUG11 www.wwrug.com ARSlist: Where the Answers Are_ _attend WWRUG11 www.wwrug.com ARSlist: Where the Answers Are_ _attend WWRUG11 www.wwrug.com ARSlist: Where the Answers Are_ ___ UNSUBSCRIBE or access ARSlist Archives at www.arslist.org attend wwrug11 www.wwrug.com ARSList: Where the Answers Are
Re: Developer Studio and Radio Button Height
That used to work on the Admin tool on character fields, but didn't work on the early releases of the Dev Studio.. Joe -Original Message- From: Luttmann, Michael W Mr CTR DISA CD553 Sent: Wednesday, March 30, 2011 5:49 PM Newsgroups: public.remedy.arsystem.general To: arslist@ARSLIST.ORG Subject: Re: Developer Studio and Radio Button Height When I have trouble with default field height (radio button or character field), I find it helpful to temporarily set the height to 2 lines, then set it back to 1. That usually works. Mike Luttmann DISA Remedy Engineer -Original Message- From: Action Request System discussion list(ARSList) [mailto:arslist@ARSLIST.ORG] On Behalf Of Lyle Taylor Sent: Wednesday, March 30, 2011 13:02 To: arslist@ARSLIST.ORG Subject: Re: Developer Studio and Radio Button Height ** I'm using 7.6.03. Like Andrew, I see this when I try to align and size things similarly using the toolbar buttons. I haven't yet tried fiddling with the other properties to see if it would pop back, though. I'll give that a try. Thanks, Lyle From: Action Request System discussion list(ARSList) [mailto:arslist@ARSLIST.ORG] On Behalf Of Andrew Fremont Sent: Wednesday, March 30, 2011 11:13 AM To: arslist@ARSLIST.ORG Subject: Re: Developer Studio and Radio Button Height ** I'm having the same issue on the selection field on DS 7.5. P004 This happen on selecting multiple fields then using the Align Left and Size Label button from the menu bar. To restore the hight on the selection fields, I have to change some of the display properties on width, alignment... On Tue, Mar 29, 2011 at 9:24 PM, Joe Martin D'Souza jdso...@shyle.net wrote: ** What version of the studio are you on? I used to have this problem on the very early versions of the Studio and found it frustrating as well.. It was then later corrected on later versions.. Joe From: Lyle Taylor mailto:tayl...@ldschurch.org Sent: Tuesday, March 29, 2011 8:24 PM Newsgroups: public.remedy.arsystem.general To: arslist@ARSLIST.ORG Subject: Developer Studio and Radio Button Height ** Hi All, I'm having a problem with DS where when I modify the layout of a radio button, it changes the height to 14 pixels, which cuts off the lower portion of the radio button. The height property for the field is grayed out, so I can't adjust it back to something reasonable. Has anyone else had this problem? Any idea how to fix it? Thanks, Lyle Taylor NOTICE: This email message is for the sole use of the intended recipient(s) and may contain confidential and privileged information. Any unauthorized review, use, disclosure or distribution is prohibited. If you are not the intended recipient, please contact the sender by reply email and destroy all copies of the original message. ___ UNSUBSCRIBE or access ARSlist Archives at www.arslist.org attend wwrug11 www.wwrug.com ARSList: Where the Answers Are
Re: Developer Studio and Radio Button Height
I do not recall seeing it on 7.6.03 but then I was working on that version for a very short time before stepping up to 7.6.04. I’ll try it on 7.6.04 and let you guys know if that problem still exists but I could swear it was fixed after some of the initial patches of 7.5. Joe From: Lyle Taylor Sent: Wednesday, March 30, 2011 3:01 PM Newsgroups: public.remedy.arsystem.general To: arslist@ARSLIST.ORG Subject: Re: Developer Studio and Radio Button Height ** I’m using 7.6.03. Like Andrew, I see this when I try to align and size things similarly using the toolbar buttons. I haven’t yet tried fiddling with the other properties to see if it would pop back, though. I’ll give that a try. Thanks, Lyle From: Action Request System discussion list(ARSList) [mailto:arslist@ARSLIST.ORG] On Behalf Of Andrew Fremont Sent: Wednesday, March 30, 2011 11:13 AM To: arslist@ARSLIST.ORG Subject: Re: Developer Studio and Radio Button Height ** I'm having the same issue on the selection field on DS 7.5. P004 This happen on selecting multiple fields then using the Align Left and Size Label button from the menu bar. To restore the hight on the selection fields, I have to change some of the display properties on width, alignment... On Tue, Mar 29, 2011 at 9:24 PM, Joe Martin D'Souza jdso...@shyle.net wrote: ** What version of the studio are you on? I used to have this problem on the very early versions of the Studio and found it frustrating as well.. It was then later corrected on later versions.. Joe From: Lyle Taylor Sent: Tuesday, March 29, 2011 8:24 PM Newsgroups: public.remedy.arsystem.general To: arslist@ARSLIST.ORG Subject: Developer Studio and Radio Button Height ** Hi All, I’m having a problem with DS where when I modify the layout of a radio button, it changes the height to 14 pixels, which cuts off the lower portion of the radio button. The height property for the field is grayed out, so I can’t adjust it back to something reasonable. Has anyone else had this problem? Any idea how to fix it? Thanks, Lyle Taylor NOTICE: This email message is for the sole use of the intended recipient(s) and may contain confidential and privileged information. Any unauthorized review, use, disclosure or distribution is prohibited. If you are not the intended recipient, please contact the sender by reply email and destroy all copies of the original message. ___ UNSUBSCRIBE or access ARSlist Archives at www.arslist.org attend wwrug11 www.wwrug.com ARSList: Where the Answers Are
Re: Developer Studio and Radio Button Height
What version of the studio are you on? I used to have this problem on the very early versions of the Studio and found it frustrating as well.. It was then later corrected on later versions.. Joe From: Lyle Taylor Sent: Tuesday, March 29, 2011 8:24 PM Newsgroups: public.remedy.arsystem.general To: arslist@ARSLIST.ORG Subject: Developer Studio and Radio Button Height ** Hi All, I’m having a problem with DS where when I modify the layout of a radio button, it changes the height to 14 pixels, which cuts off the lower portion of the radio button. The height property for the field is grayed out, so I can’t adjust it back to something reasonable. Has anyone else had this problem? Any idea how to fix it? Thanks, Lyle Taylor NOTICE: This email message is for the sole use of the intended recipient(s) and may contain confidential and privileged information. Any unauthorized review, use, disclosure or distribution is prohibited. If you are not the intended recipient, please contact the sender by reply email and destroy all copies of the original message. ___ UNSUBSCRIBE or access ARSlist Archives at www.arslist.org attend wwrug11 www.wwrug.com ARSList: Where the Answers Are
