RE: [Asterisk-Users] FC3 or FC1 (or something else?)
From what ive read on this list and the wiki, centos 4.x has issues with the TE110P card ( a lot of people having issues after first reboot).Would 3.5 be better (I know [EMAIL PROTECTED] uses this) Am I right in saying that OS's with the 1.6 kernel still require a lot more tinkering than those with the 1.4 kernel ?? Does anybody know what Digiums stance on OS is , I remember speaking to them about 6 months ago and they were recommending a 1.4 kernel version of Debian. Are there any specific disadvantages to running 1.4 kernel ??, -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Robert La Ferla Sent: 04 January 2006 02:16 To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [Asterisk-Users] FC3 or FC1 (or something else?) Michael Stearne wrote: I am having trouble with FC3. After doing a yum update (of 1264 packages) I still cannont compile 1.2.1 from source: make[1]: `libedit.a' is up to date. make[1]: Leaving directory `/usr/src/asterisk-1.2.1/editline' make[1]: Entering directory `/usr/src/asterisk-1.2.1/db1-ast' make[1]: `libdb1.a' is up to date. make[1]: Leaving directory `/usr/src/asterisk-1.2.1/db1-ast' make[1]: Entering directory `/usr/src/asterisk-1.2.1/stdtime' make[1]: *** No rule to make target `/usr/lib/gcc/i386-redhat-linux/3.4.2/include/stddef.h', needed by `localtime.o'. Stop. make[1]: Leaving directory `/usr/src/asterisk-1.2.1/stdtime' make: *** [stdtime/libtime.a] Error 2 and when I try to update from binary: [EMAIL PROTECTED] ~]# rpm -Uvh asterisk-1.2.1-15.rhfc3.at.i386.rpm warning: asterisk-1.2.1-15.rhfc3.at.i386.rpm: V3 DSA signature: NOKEY, key ID 66534c2b error: Failed dependencies: libpri.so.1 is needed by asterisk-1.2.1-15.rhfc3.at.i386 libspandsp.so.0 is needed by asterisk-1.2.1-15.rhfc3.at.i386 libtonezone.so.1 is needed by asterisk-1.2.1-15.rhfc3.at.i386 I have compiled from source 1.0.9 without problem on this machine. Any ideas why my attempts are now failing? To use the binary, it appears that you need libpri. Look at http://www.asterisk.org (top right hand side) Did you try getting the latest source via svn subversion? ___ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
[Asterisk-Users] FC3 or FC1 (or something else?)
Hi I wish to install asterisk 1.2 (the latest tar.gz from the site not the CVS version) on an HP box with a TE110P (single port E1/T1) My question is which OS would be preferred in this configuration Fedora Core 1 or Fedora Core 3, and are there any install guides out there that are recent enough for asterisk 1.2 I am also open to suggestions for other Operating Systems if any of you feel that FC1/3 are not the best for the job, my only definates are that I use the latest tar.gz from the asterisk.org website not the CVS and also that I will be using the TE110p Any help would be greatly appreciated Gary ___ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
[Asterisk-Users] 4 port BRI options ?
Hi there I am in the UK.. and am running latest asterisk on FC1 (2.4 kernel). I would like to know what the best option is for a 4 port BRI card. I notice Digium don't provide one.. I have heard the Junghanns do one...but are there others ?? Is the Junghanns card reliable/stable with good sound quality ?? I notice it is very expensive in a per port comparison with the Digium cards hence why I am also looking for alternative cards Your experiences would be greatly appreciated Gary ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
RE: [Asterisk-Users] 4 port BRI options ?
Wow that eicon is certainly quite expensive... ive found 2 sellers in the UK so far selling at over £1000 . I think the Junghans comes in at around £600. Is the Eicon that much better ? -Original Message- From: Nardis Dome [mailto:[EMAIL PROTECTED] Sent: 03 June 2005 12:49 To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [Asterisk-Users] 4 port BRI options ? Hi, Eicon Diva 4BRI Card and chan_capi. --- Brett, Gary [EMAIL PROTECTED] wrote: Hi there I am in the UK.. and am running latest asterisk on FC1 (2.4 kernel). I would like to know what the best option is for a 4 port BRI card. I notice Digium don't provide one.. I have heard the Junghanns do one...but are there others ?? Is the Junghanns card reliable/stable with good sound quality ?? I notice it is very expensive in a per port comparison with the Digium cards hence why I am also looking for alternative cards Your experiences would be greatly appreciated Gary ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users __ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
[Asterisk-Users] writing to MYSQL database
Hi there I have been successfully using the asterisk command MYSQL to read information from a MySql database, but was wondering if there was any way of WRITING data (ie user input data) to the database ???, looking through the parameters of the MYSQL command it seems as though this function isn't availableis there another application for this??? Cheers ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
[Asterisk-Users] play gsm files in windows
Does anybody know of a WINDOWS application (preferably freeware) that will simply playback asterisk GSM sound files, I don't want to record them, just playback the ones that are currently there. Any help would be greatly appreciated cheers ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
[Asterisk-Users] Cost field in Call Detail Records (cdr)
Hi there I don't know if this utility is available anywhere at the moment but I thought id ask you guys if you know of one What I would like is a way of adding a field to my cdr records (either the Master.csv or a destination mysql table) for cost ! based on some sort of config file (or table) which has a listing of all the tariffs for particular prefixes, ie in the UK, the 0870 prefix is national rate at £0.04p per minute (don't know if that is exact btw !) so I would like a way of adding a field that determines , for example that extension 7201 made a 4 minute call to an 0870 number and therefore that call has cost £0.16p. I can then get my reporting software to pull this additional field into the report Is there anything around that does this sort of thing, open source or otherwise ?? Any help would be greatly appreciated Gary ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
[Asterisk-Users] A question about queues
Hi there, quick question about queues (B (BWhen calling a queue (which contains eg 4 extensions) it tells me what (Bposition I am in the queue and then plays some music$B!D(Jthat is fine$B!D(J (Bhowever, If there is no-one in the queue , it tells me that im first in line (Band then plays hold music while the phones ring. This is annoying my callers (Bquite a bit . How do I get it so that if I ring the queue, it just puts me (Bstraight through to one of the available 4 phones, and only if all 4 phones (Bare busy (ie on calls) then announce a position in the queue and play music? (B (BFor example (B (BUser 1 dials 7272 $B"*(J goes through to agent 1 (BUser 2 dials 7272 $B"*(J goes through to agent 2 (BUser 3 dials 7272 $B"*(J goes through to agent 3 (BUser 4 dials 7272 $B"*(J goes through to agent 4 (BUser 5 dials 7272 $B"*(J announces message that you are first in line (BUser 6 dials 7272 $B"*(J announces message that you are second in line (B (B (BAny help on this would be greatly appreciated (B (B (B___ (BAsterisk-Users mailing list (BAsterisk-Users@lists.digium.com (Bhttp://lists.digium.com/mailman/listinfo/asterisk-users (BTo UNSUBSCRIBE or update options visit: (B http://lists.digium.com/mailman/listinfo/asterisk-users
[Asterisk-Users] ISDN question
Hi there I wonder if anybody has had this problem before, I am running Asterisk v1.06 stable on FC1 with a digium TE110p card (I am in the UK so am using E1 through British Telecom with my * server as the PRI_CPE). The strange thing is, everything is fine, no problems with asterisk, the card comes up fine I can receive calls, but the problem comes when making calls, when I dial out, it gets to the British Telecom exchange and brings back the BT message The number you have dialled has not been recoginised . so the first thing I did was to make sure that the number was the full telephone number, and indeed it is, my dial plan does not prepend any digits to outbound calls so there is no reason to doubt that I am sending the full string to BT, even my CLI has the full number ie Zap/g1/02087775566 , very strange. I am fortunate enough to have at my disposal a spare E1 card on a 3com NBX Voip Switch, so as a test ran a back to back E1 crossover between the 3Com and the * Server. I configured the dial plan on the 3com to forward whatever it received directly out to the telco (with no digit manipulation, effectivly bridging the call) and hey presto, the destination phone rings. I check the logs of the 3com NBX, and indeed it receved the full number and passed it straight on to BT successfully, however if I connect * straight to BT , BT don't recognise what I send them... I am quite new to ISDN technologies and am little confused how this can happen, Is there something I am missing here, what else gets passed to the telco from the PRI_CPE end?? Any help would be greatly appreciated Gary ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
[Asterisk-Users] IRQ headaches
Excuse my ignorance here, but I am desperately trying to isolate the IRQ for my TE110P card (shown below as t1xxp) Ive gone into my bios and disabled all usb , parallel, serial and some other devices, those that I needed to keep, I have moved off of IRQ 10 and onto IRQ 5, but everytime I boot up, I get usb-uhci and ehci_hcd using IRQ 10 as well as my Digium card. Does anybody know what these are and how I can get rid of them ? I am running on an HP Compaq D530s with Fedora Core 1, here is my [EMAIL PROTECTED] root]# cat /proc/interrupts CPU0 0: 15242 XT-PIC timer 1: 4 XT-PIC keyboard 2: 0 XT-PIC cascade 5: 3914 XT-PIC usb-uhci, usb-uhci, eth0 8: 1 XT-PIC rtc 10: 0 XT-PIC usb-uhci, ehci_hcd, t1xxp 12: 48 XT-PIC PS/2 Mouse 14: 4094 XT-PIC ide0 15: 1 XT-PIC ide1 NMI: 0 ERR: 0 Thanks and Regards Gary ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
RE: [Asterisk-Users] Kernel 2.4 or 2.6 for the latest asterisk ? ?
Thanks for that, I am however slightly concerned that due to the fast moving asterisk project (with new versions coming out regularly) that digium may start phasing out support for 2.4 kernel, I would like to settle on an OS for my customers and don't want to have to readdress the situation in one year because the 2.4 kernel is no longer the supported /stable version. Does anybody believe this likely to happen?? Thanks -Original Message- From: Ariel Batista [mailto:[EMAIL PROTECTED] Sent: 15 March 2005 15:00 To: 'Asterisk Users Mailing List - Non-Commercial Discussion' Subject: RE: [Asterisk-Users] Kernel 2.4 or 2.6 for the latest asterisk ?? This question really has no one reply. The different Linux builds all have there reasons. If your used to Fedora Core 1 then that is what you should use. I use CentOS which is a clone of RHEL 3. They have just released there Version 4 which is based on RHEL 4. It works and since I am used to the way RH does there settings I like it. But it's really up to you. Fedora is good and works. I just don't use it do to it's mainly for RH to develop there newer system from it. But I know that many use without problem Debian, Fedora, Slackware, Gentoo and many more. There is even a group that is working with FreeBSD. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Brett, Gary Sent: Tuesday, March 15, 2005 5:47 AM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: [Asterisk-Users] Kernel 2.4 or 2.6 for the latest asterisk ?? Hi there Just a quick question. I have been playing around with asterisk CVS-1.0.02 on fedora core 1 (2.4 kernel) and I would like to have a look at asterisk v 1.0.6 but am still a little uncertain which linux kernel is best to run on ?, can I use Fedora Core 3 (is it the preferred kernel) or should I stick with FC1 Ps - the only additional hardware in the box will be a digium single port E1 Any advice would be greatly appreciated Gary ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
[Asterisk-Users] Kernel 2.4 or 2.6 for the latest asterisk ??
Hi there Just a quick question. I have been playing around with asterisk CVS-1.0.02 on fedora core 1 (2.4 kernel) and I would like to have a look at asterisk v 1.0.6 but am still a little uncertain which linux kernel is best to run on ?, can I use Fedora Core 3 (is it the preferred kernel) or should I stick with FC1 Ps - the only additional hardware in the box will be a digium single port E1 Any advice would be greatly appreciated Gary ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
[Asterisk-Users] E1/T1 back to back ??
Hi there Just a quick question, I will be building some servers in a lab utilizing Digium E1 cards. I would like if possible to avoid the expense of installing an e1/ISDN30 in my lab. I have two questions really, first does anybody know of an effective simulation tool I can use to replicate a real world PRI but without the telco line being installed. And secondly, can I have a scenario with 2 asterisk servers with digium e1 cards 'back to back' one configured as the network side and the other configured as the client side (can I just use a single cat5 straight through cable between them ?? and cant the Digium e1 cards operate ok in both modes?) Any advice would be greatly appreciated ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
[Asterisk-Users] Some Hardware Advice
Hi there Just a quick post to ask you guys if you've had any bad (even good) experiences using current model HP or Dell servers ?? specifically the HP proliant ML110 and the Dell Poweredge 1800 SATA, (but I will welcome your recommendations on any current Models) . I will be rolling out some small to medium systems with a max 100 Sip extensions and 60 outbound (2 x e1) for the larger rollouts and as little as 5-10 users for the smaller systems ( zap channels on TDM400P's) . Any advice would be greatly appreciated Gary ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
RE: [Asterisk-Users] how do i get rid of this blasted echo !!!
So is it accepted as standard that compiling with MMX will help improve echo type issues ? -Original Message- From: Herman Cremer [mailto:[EMAIL PROTECTED] Sent: 11 March 2005 11:56 To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [Asterisk-Users] how do i get rid of this blasted echo !!! Thanks Error. I have switched to IAX looong agomuch better ! Just battle when doing double NAT :) I dont have the phones here with me, but lets say its different...is there away to adjust the channel to fix the err ? -herman On Fri, 2005-03-11 at 13:24, [EMAIL PROTECTED] wrote: Hi Herman, Look at the bottom of your phones and compare the REN values of both. Do they both value of REN 1.0? I think the one with the problem might have an REN value other than one. You tell me! Errol Samuels Don't let SIP Drive you crazy, use IAX2 On the echo... I have 2 extensions, with different analog phones. The one works fine, the other echos and scratches like mad !! I have switched the ports, cables etc but its ALWAYS the same phone... Maybe this could be it ? Is it ok from a SIP phone ? Herman cremer ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
RE: [Asterisk-Users] how do i get rid of this blasted echo !!!
Dennis, Thanks, I am currently using kernel 2.4, are you saying there are fixes for this sort of thing in kernel 2.6.9 -Original Message- From: Dennis Webb [mailto:[EMAIL PROTECTED] Sent: 11 March 2005 13:57 To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: RE: [Asterisk-Users] how do i get rid of this blasted echo !!! I've added MMX and it didn't help. I also did the CFLAGS+=-march=pentium4 with no help there either. The more I search, the more I found and I'm down to disabling any hardware not used in the box such as USB and recompiling the kernel with a fresh copy from kernel.org. It seems there were a lot of problems solved when 2.6.9 came out. If I ever get mine fixed, I will try to post everything I did. On Fri, 2005-03-11 at 07:50, Brett, Gary wrote: So is it accepted as standard that compiling with MMX will help improve echotype issues ?-Original Message-From: Herman Cremer [mailto:[EMAIL PROTECTED] Sent: 11 March 2005 11:56To: Asterisk Users Mailing List - Non-Commercial DiscussionSubject: Re: [Asterisk-Users] how do i get rid of this blasted echo !!!Thanks Error.I have switched to IAX looong agomuch better !Just battle when doing double NAT :)I dont have the phones here with me,but lets say its different...is there awayto adjust the channel to fix the err ?-hermanOn Fri, 2005-03-11 at 13:24, [EMAIL PROTECTED] wrote: Hi Herman, Look at the bottom of your phones and compare the REN values of both. Do they both value of REN 1.0? I think the one with the problem might have an REN value other than one. You tell me! Errol Samuels Don't let SIP Drive you crazy, use IAX2 On the echo... I have 2 extensions, with different analog phones. The one works fine, the other echos and scratches like mad !! I have switched the ports, cables etc but its ALWAYS the same phone... Maybe this could be it ? Is it ok from a SIP phone ? Herman cremer ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users___Asterisk-Users mailing listAsterisk-Users@lists.digium.comhttp://lists.digium.com/mailman/listinfo/asterisk-usersTo UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users___Asterisk-Users mailing listAsterisk-Users@lists.digium.comhttp://lists.digium.com/mailman/listinfo/asterisk-usersTo UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
RE: [Asterisk-Users] how do i get rid of this blasted echo !!!
Sorry for the delay in replying to this post, my hardware platform is an HP Compaq D530 SFF - 2.4gb /512mb /40gb. I have a TDM02b configuration (2xFXO). You mention FCC and the mode for UK impedance, can you explain a little further on this one as I am a little lost, I cant see any setting with FCC anywhere (even in the config samples) so could you explain whereabouts I set this ? The other question I have is regarding the MMX stuff you talk about. My processor is a P4 2.4ghz, excuse my lack of knowledge here but I thought MMX was a feature bundled with processors of about 5 years ago?? Do I still need to recompile with MMX support, and if so, some pointer on how to do this would be appreciated (also, can I recompile the zaptel drivers and carry on as normal, or will I need to reinstall asterisk again?) Any help would be greatly appreciated Regards Gary -Original Message- From: Andrew Kohlsmith [mailto:[EMAIL PROTECTED] Sent: 03 March 2005 12:32 To: asterisk-users@lists.digium.com Subject: Re: [Asterisk-Users] how do i get rid of this blasted echo !!! On March 3, 2005 07:02 am, Brett, Gary wrote: I have 2 TDM400P's, 2 asterisk servers (running on powerful boxes with FC1 and * v CVS 1.0.02), and 4 analogue PSTN lines from BT and whatever I do, I cannot get rid of this damn local echo. Ive tried setting the echoTraining, echoCancel (in phone.conf and Zapata.conf) , echocancelwhenbridged to every possible combination , Ive even tried running the fxotune utility to no avail. Ive swapped cards, telephone lines, servers and also tried different phones (budgetone, x-lite, 7940) but still it's the same. You haven't told us what hardware (platform) you're on, nor have you told us if your FXO ports are in whatever mode they need to be in for UK impedances (I think they default to FCC or North American). For echo on my PRI I could not get rid of it until I recompiled the zaptel and wct4xxp drivers with MMX support enabled and with the instructions reordered and used for the pentium 4 processor (which I'm using, Xeon 2.6 to be exact). After that, the echo magically disappeared. I haven't reverted back to my original (non-processor-optimized, non-MMX-enabled) drivers to see if it comes back, but that's all that's changed and it's in production so I am hesitant to screw around with it any more. -A. ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
[Asterisk-Users] how do i get rid of this blasted echo !!!
Any help on this would be great I have 2 TDM400P's, 2 asterisk servers (running on powerful boxes with FC1 and * v CVS 1.0.02), and 4 analogue PSTN lines from BT and whatever I do, I cannot get rid of this damn local echo. Ive tried setting the echoTraining, echoCancel (in phone.conf and Zapata.conf) , echocancelwhenbridged to every possible combination , Ive even tried running the fxotune utility to no avail. Ive swapped cards, telephone lines, servers and also tried different phones (budgetone, x-lite, 7940) but still it's the same. Does anybody have any other suggestions as this is driving me up the wall Cheers Gary ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
[Asterisk-Users] multiple Fritz ISDN/BRI PCI
Hi there, I just wondered if anyone has used multiple Fritz ISDN PCI v2.0 cards in their setup. This card is a single port BRI and is good value, (apparently works well with *) putting 4 of these in a server is significantly cheaper than buying a 4port BRI from Junghanns. Has anybody had any experiences with more than one of these Fritz cards in a server?? Thanks Regards Gary ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
[Asterisk-Users] Digium BRI or quad BRI
Hi there, quick question...do digium make any BRI cards (ISDN2) or even better a quad port BRI, maybe im going blind, but I cant see any on their website Cheers Gary ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
RE: [Asterisk-Users] Digium BRI or quad BRI
Thanks Florian, that's great, is this card (junghanns QuadBRI) really stable with * ? Do you or anybody else have any experiences with this card and also is it ok to run multiple cards in one machine cheers -Original Message- From: Florian Overkamp [mailto:[EMAIL PROTECTED] Sent: 23 February 2005 12:58 To: 'Asterisk Users Mailing List - Non-Commercial Discussion' Subject: RE: [Asterisk-Users] Digium BRI or quad BRI Hi, -Original Message- Hi there, quick question...do digium make any BRI cards (ISDN2) or even better a quad port BRI, maybe im going blind, but I cant see any on their website They don't. If you are in need of a european ISDN2 type, see if http://www.junghanns.net/asterisk/page17.html helps you out. Florian ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
[Asterisk-Users] defining the zap channel used on inbound analogue calls
Hello all I am relatively new to asterisk and am sure this will be a simple question to answer. I have a TDM400p card and I am in the process of creating my dial plan, however I am a bit stuck on one thing. I have 2 analogue lines (each obviously with its own DDI) connected to the card; I want to set it up so that if I dial inbound to the first DDI (e.g. 0208777) it will go to the IVR and when I ring inbound to the second DDI (e.g. 0208777) I want it to go directly to the SIP phone internally. Its with the latter I am having the issue My problem is this Due to the fact these are analogue lines, I realise that the DDI is not sent to the TDM400P so I presume the only way for the dial plan to filter inbound calls is by the Zap Channel it came in on? (In my case Zap/1 and Zap/2). I have tried the following -- [globals] INBOUND=Zap/2 [default] exten = ${INBOUND},1,Answer exten = ${INBOUND},2,Background(soundfile),tT exten = ${INBOUND},3,Hangup -- I also tried exten = Zap/2,1,Answer And exten = Zap/2-1,1,Answer And various other combinations all to no avail, is it possible to filter by the Zap channel used ?, Surely if I want to direct call a phone, I dont have to go through an IVR everytime ?? (I realise this wouldnt be an issue with ISDN). I noticed also in some documentation that you have to use an s for all analogue traffic, is this the case ?? and if so can you use it in conjunction with a zap channel definition ?? So in summary, How does the dialplan define the Zap channel used on inbound analogue calls Any help would be greatly appreciated Gary ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
[Asterisk-Users] asterisk@home in production env
Hi there I just wanted to know what the difference between [EMAIL PROTECTED] and manually built boxes actually is ?? What makes [EMAIL PROTECTED] a home system ? Is it not a good idea to run [EMAIL PROTECTED] then modify/tweak it to use in a production environment ??, if so why not, would somebody be able to explain this to me, it seems to have a hobbiest tag associated with it, and i just wanted to know the difference cheers Gary ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
RE: [Asterisk-Users] Reccomendation for reliable handsets
Thanks Mark I am definitely interested in the budgetone 102 but am a little concerned about the 10mbit only Ethernet ports !! From what I have read, these are relatively new models and I like the addition of a second port to daisy chain your PC from the same network connection, however why 10mbits and not 100mbits ??, I would have thought this would be a minimum these days, I don't know anyone who still runs 10mbits to the desktop, and im not too happy about bottlenecking my customers fast Ethernet network with these phones A real shame really. Does anybody know if Grandstream will be addressing this or indeed if they have any current models with at least 100mbit ports Regards -Original Message- From: Mark Benson [mailto:[EMAIL PROTECTED] Sent: 03 February 2005 14:27 To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [Asterisk-Users] Reccomendation for reliable handsets I have been using an IN1002 generic handset (supposed to be an unbranded cisco copy but I am skeptical) for a few months (6months+) now, and it seems pretty stable - however I haven't found a reliable supplier Also there is almost no support for them.. I have switched to the grandstream budgetone 102 and they seem pretty good too. You can pretty much plug in and forget it with both phones. They do lock up occasionally (once a month to once every 3 months). I have yet to upgrade the firmware on the grandstreams... Mark Brett, Gary wrote: Sorry to move this up the list again, but does anybody have any advice on this -Original Message- From: Brett, Gary [mailto:[EMAIL PROTECTED] Sent: 02 February 2005 10:49 To: 'asterisk-users@lists.digium.com' Subject: [Asterisk-Users] Reccomendation for reliable handsets Hi there I'm sure this question has been raised a number of times before, but unfortunately I do not have direct access to the archives I am about to roll out Asterisk to a few companies and would like to hear your experiences about the various handsets/phones that are Asterisk compatible I am primarily looking for 2 options, the first being a cheaper model which will provide reliability whilst still maintaining a reasonable feature set, and a reliable model from the more expensive range with more features But the definite focus here is on reliability and ease of maintenance Any help or advice would be greatly appreciated; I would really like to hear your experiences/recommendations Cheers Gary ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
[Asterisk-Users] Digium Cards connecting to BT
Hi there Just a general question, has anybody experienced any problems with any Digium telephony cards in the UK, specifically with BT (British Telecom) lines. I just want to make sure there are no compatibility issues before purchasing cards, (mainly TDM400P's) Any comments would be greatly appreciated Thanks ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
RE: [Asterisk-Users] Reccomendation for reliable handsets
Bob, Thanks for your reply, im not sure what top posting is, but I have been on holiday and am simply replying to a response that was given to my original question, If you could explain to me how I go about continuing the thread it would be much appreciated, with regards to your reply, I am indeed daisy chaining to the PC, hence my post point regarding bottlenecking the 100mbits to the desktop I just find it hard to understand the point of releasing a phone with a 2 port hub yet still limiting to ports to 10mbits, anyway , I take it there are no alternatives from budgetone, so I will have to at other low cost models Thanks all -Original Message- From: Bob Goddard [mailto:[EMAIL PROTECTED] Sent: 14 February 2005 14:11 To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [Asterisk-Users] Reccomendation for reliable handsets On Monday 14 February 2005 13:00, Brett, Gary wrote: Thanks Mark I am definitely interested in the budgetone 102 but am a little concerned about the 10mbit only Ethernet ports !! From what I have read, these are relatively new models and I like the addition of a second port to daisy chain your PC from the same network connection, however why 10mbits and not 100mbits ??, I would have thought this would be a minimum these days, I don't know anyone who still runs 10mbits to the desktop, and im not too happy about bottlenecking my customers fast Ethernet network with these phones A real shame really. Does anybody know if Grandstream will be addressing this or indeed if they have any current models with at least 100mbit ports Please do not top post. I don't think there is a single IP phone which can flood a 10Mbps port. You do not need 100Mbps on a phone unless it has a passthrough to a PC. Let's see, using a 64Kbps codec and being generous, will use 100Kbps on the wire. Assuming the 10Mbps port can reliably run at 8Mbps, that means the phone would have to have 8 * 1000 / 100 = 80 concurrent RTP streams. Can anyone see anything wrong with my rough calculations? B -Original Message- From: Mark Benson [mailto:[EMAIL PROTECTED] Sent: 03 February 2005 14:27 To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [Asterisk-Users] Reccomendation for reliable handsets I have been using an IN1002 generic handset (supposed to be an unbranded cisco copy but I am skeptical) for a few months (6months+) now, and it seems pretty stable - however I haven't found a reliable supplier Also there is almost no support for them.. I have switched to the grandstream budgetone 102 and they seem pretty good too. You can pretty much plug in and forget it with both phones. They do lock up occasionally (once a month to once every 3 months). I have yet to upgrade the firmware on the grandstreams... Mark Brett, Gary wrote: Sorry to move this up the list again, but does anybody have any advice on this -Original Message- From: Brett, Gary [mailto:[EMAIL PROTECTED] Sent: 02 February 2005 10:49 To: 'asterisk-users@lists.digium.com' Subject: [Asterisk-Users] Reccomendation for reliable handsets Hi there I'm sure this question has been raised a number of times before, but unfortunately I do not have direct access to the archives I am about to roll out Asterisk to a few companies and would like to hear your experiences about the various handsets/phones that are Asterisk compatible I am primarily looking for 2 options, the first being a cheaper model which will provide reliability whilst still maintaining a reasonable feature set, and a reliable model from the more expensive range with more features But the definite focus here is on reliability and ease of maintenance Any help or advice would be greatly appreciated; I would really like to hear your experiences/recommendations Cheers Gary ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
[Asterisk-Users] Web based Asterisk management tool
Hi there I am new to Asterisk and am looking for a web based management tool, for managers to manage hunt groups, extensions etc and for user to have access to there own phone features. I have seen there are a number of commercial tools available for this, but I presume there are some freeware options too I noticed one that I like at http://www.thirdlane.com/screenshots.htm but I am assuming this is just a freeware product that has been re-badged so to speak. If any body can give me some suggestions that would be great Regards Gary ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
RE: [Asterisk-Users] Web based Asterisk management tool
Thanks for the responses, isn't [EMAIL PROTECTED] an pre-configured distribution for small systems?? I am looking for an open source web management tool to use on any size asterisk server (even ones that are already up and running) the user base could be anything between small and large with many external lines, Ive looked at AMP, is it free ? and are there any alternatives or is AMP the only open source web management tool ? -Original Message- From: dean collins [mailto:[EMAIL PROTECTED] Sent: 09 February 2005 15:05 To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: RE: [Asterisk-Users] Web based Asterisk management tool That would be the AMP database, I don't know. Ping the amp list and find out. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Daniel Eboa Sent: Wednesday, February 09, 2005 9:47 AM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: RE: [Asterisk-Users] Web based Asterisk management tool How big can be [EMAIL PROTECTED] user data base? Can it handle 1000s of users ? Regards. Daniel. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of dean collins Sent: mercredi 9 février 2005 15:42 To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: RE: [Asterisk-Users] Web based Asterisk management tool Hi Gary, do a search for [EMAIL PROTECTED] the iso is available for download at sourceforge and does exactly what you are looking for. Cheers, Dean -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Brett, Gary Sent: Wednesday, February 09, 2005 8:01 AM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: [Asterisk-Users] Web based Asterisk management tool Hi there I am new to Asterisk and am looking for a web based management tool, for managers to manage hunt groups, extensions etc and for user to have access to there own phone features. I have seen there are a number of commercial tools available for this, but I presume there are some freeware options too I noticed one that I like at http://www.thirdlane.com/screenshots.htm but I am assuming this is just a freeware product that has been re-badged so to speak. If any body can give me some suggestions that would be great Regards Gary ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
RE: [Asterisk-Users] Web based Asterisk management tool
Thanks Dean, you say that [EMAIL PROTECTED] is just an automated way of installing AMP and FOP and Web Meetme. But from the installation instructions I have read, you download an ISO image that installs a linux distro for you (destroying current install) and then configures itself for use I do not want to overwrite any existing systems, here is a quote from the installation page of [EMAIL PROTECTED] 1) Burn [EMAIL PROTECTED] iso to a blank CD 2) Boot your Asterisk PC with the CD and press enter NOTE: This will erase all data on the hard drive of the PC!!! Etc etc All I want is the web config tool ! Apologies if I am misunderstanding you here, as I say I am quite new to this and need to get up to speed fast For an Admin only web based product, is AMP my only option ?? Cheers again -Original Message- From: dean collins [mailto:[EMAIL PROTECTED] Sent: 09 February 2005 16:48 To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: RE: [Asterisk-Users] Web based Asterisk management tool You need to go back and reread. It is just pretty much an asterisk configuration tool (ok some minor things in the backend but it's the best out there). AMP is available for free download but they make their money by offering support. [EMAIL PROTECTED] is just an automated way of installing AMP and FOP and Web Meetme. If you really have a need to support thousands of extensions as you suggest then you should really go back and learn how to program asterisk with a database yourself from scratch. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Brett, Gary Sent: Wednesday, February 09, 2005 11:17 AM To: 'Asterisk Users Mailing List - Non-Commercial Discussion' Subject: RE: [Asterisk-Users] Web based Asterisk management tool Thanks for the responses, isn't [EMAIL PROTECTED] an pre-configured distribution for small systems?? I am looking for an open source web management tool to use on any size asterisk server (even ones that are already up and running) the user base could be anything between small and large with many external lines, Ive looked at AMP, is it free ? and are there any alternatives or is AMP the only open source web management tool ? -Original Message- From: dean collins [mailto:[EMAIL PROTECTED] Sent: 09 February 2005 15:05 To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: RE: [Asterisk-Users] Web based Asterisk management tool That would be the AMP database, I don't know. Ping the amp list and find out. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Daniel Eboa Sent: Wednesday, February 09, 2005 9:47 AM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: RE: [Asterisk-Users] Web based Asterisk management tool How big can be [EMAIL PROTECTED] user data base? Can it handle 1000s of users ? Regards. Daniel. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of dean collins Sent: mercredi 9 février 2005 15:42 To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: RE: [Asterisk-Users] Web based Asterisk management tool Hi Gary, do a search for [EMAIL PROTECTED] the iso is available for download at sourceforge and does exactly what you are looking for. Cheers, Dean -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Brett, Gary Sent: Wednesday, February 09, 2005 8:01 AM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: [Asterisk-Users] Web based Asterisk management tool Hi there I am new to Asterisk and am looking for a web based management tool, for managers to manage hunt groups, extensions etc and for user to have access to there own phone features. I have seen there are a number of commercial tools available for this, but I presume there are some freeware options too I noticed one that I like at http://www.thirdlane.com/screenshots.htm but I am assuming this is just a freeware product that has been re-badged so to speak. If any body can give me some suggestions that would be great Regards Gary ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
RE: [Asterisk-Users] Reccomendation for reliable handsets
Sorry to move this up the list again, but does anybody have any advice on this -Original Message- From: Brett, Gary [mailto:[EMAIL PROTECTED] Sent: 02 February 2005 10:49 To: 'asterisk-users@lists.digium.com' Subject: [Asterisk-Users] Reccomendation for reliable handsets Hi there I'm sure this question has been raised a number of times before, but unfortunately I do not have direct access to the archives I am about to roll out Asterisk to a few companies and would like to hear your experiences about the various handsets/phones that are Asterisk compatible I am primarily looking for 2 options, the first being a cheaper model which will provide reliability whilst still maintaining a reasonable feature set, and a reliable model from the more expensive range with more features But the definite focus here is on reliability and ease of maintenance Any help or advice would be greatly appreciated; I would really like to hear your experiences/recommendations Cheers Gary ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
[Asterisk-Users] Reccomendation for reliable handsets
Hi there I'm sure this question has been raised a number of times before, but unfortunately I do not have direct access to the archives I am about to roll out Asterisk to a few companies and would like to hear your experiences about the various handsets/phones that are Asterisk compatible I am primarily looking for 2 options, the first being a cheaper model which will provide reliability whilst still maintaining a reasonable feature set, and a reliable model from the more expensive range with more features But the definite focus here is on reliability and ease of maintenance Any help or advice would be greatly appreciated; I would really like to hear your experiences/recommendations Cheers Gary ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users